This is an ongoing series of commits that are reformatting our
Python code.
Reformatting is done with `black`.
If you end up having problems merging this commit because you
have made changes to a python file, the best way to handle that
is to run git checkout --ours <yourfile> and then reformat it
with black.
If you run into any problems, post to discourse about it and
we will try to help.
RFC Thread below:
https://discourse.llvm.org/t/rfc-document-and-standardize-python-code-style
Differential Revision: https://reviews.llvm.org/D150782
Specifying the python path here ensures that the python binary used matches the
one used by the main MLIR tests. This is useful when cmake's automatic detection
has to be overridden.
Reviewed By: stellaraccident, bondhugula
Differential Revision: https://reviews.llvm.org/D134251
When building in debug mode, the link time of the standalone sample is excessive, taking upwards of a minute if using BFD. This at least allows lld to be used if the main invocation was configured that way. On my machine, this gets a standalone test that requires a relink to run in ~13s for Debug mode. This is still a lot, but better than it was. I think we may want to do something about this test: it adds a lot of latency to a normal compile/test cycle and requires a bunch of arg fiddling to exclude.
I think we may end up wanting a `check-mlir-heavy` target that can be used just prior to submit, and then make `check-mlir` just run unit/lite tests. More just thoughts for the future (none of that is done here).
Reviewed By: bondhugula, mehdi_amini
Differential Revision: https://reviews.llvm.org/D126585
Re-applies D111513:
* Adds a full-fledged Python example dialect and tests to the Standalone example (need to do a bit of tweaking in the top level CMake and lit tests to adapt better to if not building with Python enabled).
* Rips out remnants of custom extension building in favor of pybind11_add_module which does the right thing.
* Makes python and extension sources installable (outputs to src/python/${name} in the install tree): Both Python and C++ extension sources get installed as downstreams need all of this in order to build a derived version of the API.
* Exports sources targets (with our properties that make everything work) by converting them to INTERFACE libraries (which have export support), as recommended for the forseeable future by CMake devs. Renames custom properties to start with lower-case letter, as also recommended/required (groan).
* Adds a ROOT_DIR argument to declare_mlir_python_extension since now all C++ sources for an extension must be under the same directory (to line up at install time).
* Downstreams will need to adapt by:
* Remove absolute paths from any SOURCES for declare_mlir_python_extension (I believe all downstreams are just using ${CMAKE_CURRENT_SOURCE_DIR} here, which can just be ommitted). May need to set ROOT_DIR if not relative to the current source directory.
* To allow further downstreams to install/build, will need to make sure that all C++ extension headers are also listed under SOURCES for declare_mlir_python_extension.
This reverts commit 1a6c26d1f52999edbfbf6a978ae3f0e6759ea755.
Reviewed By: stephenneuendorffer
Differential Revision: https://reviews.llvm.org/D113732
* Depends on D111504, which provides the boilerplate for building aggregate shared libraries from installed MLIR.
* Adds a full-fledged Python example dialect and tests to the Standalone example (need to do a bit of tweaking in the top level CMake and lit tests to adapt better to if not building with Python enabled).
* Rips out remnants of custom extension building in favor of `pybind11_add_module` which does the right thing.
* Makes python and extension sources installable (outputs to src/python/${name} in the install tree): Both Python and C++ extension sources get installed as downstreams need all of this in order to build a derived version of the API.
* Exports sources targets (with our properties that make everything work) by converting them to INTERFACE libraries (which have export support), as recommended for the forseeable future by CMake devs. Renames custom properties to start with lower-case letter, as also recommended/required (groan).
* Adds a ROOT_DIR argument to `declare_mlir_python_extension` since now all C++ sources for an extension must be under the same directory (to line up at install time).
* Need to validate against a downstream or two and adjust, prior to submitting.
Downstreams will need to adapt by:
* Remove absolute paths from any SOURCES for `declare_mlir_python_extension` (I believe all downstreams are just using `${CMAKE_CURRENT_SOURCE_DIR}` here, which can just be ommitted). May need to set `ROOT_DIR` if not relative to the current source directory.
* To allow further downstreams to install/build, will need to make sure that all C++ extension headers are also listed under SOURCES for `declare_mlir_python_extension`.
Reviewed By: stephenneuendorffer, mikeurbach
Differential Revision: https://reviews.llvm.org/D111513
* Incorporates a reworked version of D106419 (which I have closed but has comments on it).
* Extends the standalone example to include a minimal CAPI (for registering its dialect) and a test which, from out of tree, creates an aggregate dylib and links a little sample program against it. This will likely only work today in *static* MLIR builds (until the TypeID fiasco is finally put to bed). It should work on all platforms, though (including Windows - albeit I haven't tried this exact incarnation there).
* This is the biggest pre-requisite to being able to build out of tree MLIR Python-based projects from an installed MLIR/LLVM.
* I am rather nauseated by the CMake shenanigans I had to endure to get this working. The primary complexity, above and beyond the previous patch is because (with no reason given), it is impossible to export target properties that contain generator expressions... because, of course it isn't. In this case, the primary reason we use generator expressions on the individual embedded libraries is to support arbitrary ordering. Since that need doesn't apply to out of tree (which import everything via FindPackage at the outset), we fall back to a more imperative way of doing the same thing if we detect that the target was imported. Gross, but I don't expect it to need a lot of maintenance.
* There should be a relatively straight-forward path from here to rebase libMLIR.so on top of this facility and also make it include the CAPI.
Differential Revision: https://reviews.llvm.org/D111504
When LLVM and MLIR are built as subprojects (via add_subdirectory),
the CMake configuration that indicates where the MLIR libraries are is
not necessarily in the same cmake/ directory as LLVM's configuration.
This patch removes that assumption about where MLIRConfig.cmake is
located.
(As an additional none, the %llvm_lib_dir substitution was never
defined, and so find_package(MLIR) in the build was succeeding for
other reasons.)
Reviewed By: stephenneuendorffer
Differential Revision: https://reviews.llvm.org/D103276
This reverts commit e9b87f43bde8b5f0d8a79c5884fdce639b12e0ca.
There are issues with macros generating macros without an obvious simple fix
so I'm going to revert this and try something different.
New projects (particularly out of tree) have a tendency to hijack the existing
llvm configuration options and build targets (add_llvm_library,
add_llvm_tool). This can lead to some confusion.
1) When querying a configuration variable, do we care about how LLVM was
configured, or how these options were configured for the out of tree project?
2) LLVM has lots of defaults, which are easy to miss
(e.g. LLVM_BUILD_TOOLS=ON). These options all need to be duplicated in the
CMakeLists.txt for the project.
In addition, with LLVM Incubators coming online, we need better ways for these
incubators to do things the "LLVM way" without alot of futzing. Ideally, this
would happen in a way that eases importing into the LLVM monorepo when
projects mature.
This patch creates some generic infrastructure in llvm/cmake/modules and
refactors MLIR to use this infrastructure. This should expand to include
add_xxx_library, which is by far the most complicated bit of building a
project correctly, since it has to deal with lots of shared library
configuration bits. (MLIR currently hijacks the LLVM infrastructure for
building libMLIR.so, so this needs to get refactored anyway.)
Differential Revision: https://reviews.llvm.org/D85140
Improve consistency when printing test results:
Previously we were using different labels for group names (the header
for the list of, e.g., failing tests) and summary count lines. For
example, "Failing Tests"/"Unexpected Failures". This commit changes lit
to label things consistently.
Improve wording of labels:
When talking about individual test results, the first word in
"Unexpected Failures", "Expected Passes", and "Individual Timeouts" is
superfluous. Some labels contain the word "Tests" and some don't.
Let's simplify the names.
Before:
```
Failing Tests (1):
...
Expected Passes : 3
Unexpected Failures: 1
```
After:
```
Failed Tests (1):
...
Passed: 3
Failed: 1
```
Reviewed By: ldionne
Differential Revision: https://reviews.llvm.org/D77708
Summary: Add a test to check if the standalone dialect is registered within standalone-opt. Similar to the mlir-opt commandline.mlir test.
Reviewers: Kayjukh, stephenneuendorffer
Reviewed By: Kayjukh
Subscribers: mehdi_amini, rriddle, jpienaar, shauheen, antiagainst, nicolasvasilache, arpith-jacob, mgester, lucyrfox, liufengdb, Joonsoo, grosul1, frgossen, jurahul, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80764
