This relands 6a0f6dd8359b38340442b7e6b14629c1d6c54a81 that was reverted
due to a missing integration test change.
This commit removes the support for lowering Func to LLVM dialect with
typed pointers. Typed pointers have been deprecated for a while now and
it's planned to soon remove them from the LLVM dialect.
Original PR: https://github.com/llvm/llvm-project/pull/70574
Currently, the VectorToLLVM patterns are built into a library along
with the corresponding pass, which also pulls in all the
platform-specific vector dialects (like AMXDialect) to apply all the
vector to LLVM conversions.
This causes dependency bloat when writing libraries - for example the
GPU to LLVM passes, which use the vector to LLVM patterns, don't need
the X86Vector dialect to be present at all.
This commit partitions the library into VectorToLLVM and
VectorToLLVMPass, where the latter pulls in all the other vector
transformations.
Reviewed By: nicolasvasilache, mehdi_amini
Differential Revision: https://reviews.llvm.org/D158287
Part of https://discourse.llvm.org/t/rfc-switching-the-llvm-dialect-and-dialect-lowerings-to-opaque-pointers/68179
This patch adds the new pass option 'use-opaque-pointers' to `-launch-func-to-vulkan` instructing the pass to emit LLVM opaque pointers instead of typed pointers.
Note that the pass as it was previously implemented relied on the fact LLVM pointers carried an element type. The passed used this information to deduce both the rank of a "lowered-to-llvm" MemRef as well as the element type. Since the element type when using LLVM opaque pointers is completely erased it is not possible to deduce the element type.
I therefore added a new attribute that is attached to the `vulkanLaunch` call alongside the binary blob and entry point name by the `-convert-gpu-launch-to-vulkan-launch` pass. It simply attaches a type array specifying the element types of each memref. This way the `-launch-func-to-vulkan` can simply read out the element type from the attribute.
The rank can still be deduced from the auto-generated C interface from `FinalizeMemRefToLLVM`. This is admittedly a bit fragile but I was not sure whether it was worth the effort to also add a rank array attribute.
As a last step, the use of opaque-pointers in `mlir-vulkan-runners` codegen pipeline was also enabled, since all covnersion passes used fully support it.
Differential Revision: https://reviews.llvm.org/D144460
Update the FuncToLLVM pass to use the generated constructors and
the generated pass option struct. The hand written constructor
got out of sync after some refactorings. Using a generated constructor
and options struct ensures the everything remains in sync.
Reviewed By: zero9178
This reverts commit 39da46826da82c24ca4407c13ad7feb8e5dc32a1
and relands commit 771d9c05afc2515b474fb53db857716dfdfc1dcf
which was originally reverted due to
https://lab.llvm.org/buildbot#builders/61/builds/39694
Differential Revision: https://reviews.llvm.org/D143733
Since the recent MemRef refactoring that centralizes the lowering of
complex MemRef operations outside of the conversion framework, the
MemRefToLLVM pass doesn't directly convert these complex operations.
Instead, to fully convert the whole MemRef dialect space, MemRefToLLVM
needs to run after `expand-strided-metadata`.
Make this more obvious by changing the name of the pass and the option
associated with it from `convert-memref-to-llvm` to
`finalize-memref-to-llvm`.
The word "finalize" conveys that this pass needs to run after something
else and that something else is documented in its tablegen description.
This is a follow-up patch related to the conversation at:
https://discourse.llvm.org/t/psa-you-need-to-run-expand-strided-metadata-before-memref-to-llvm-now/66956/14
Differential Revision: https://reviews.llvm.org/D142463
Fix an off-by-one error in extended umul extension for WebGPU.
Revert to the long multiplication algorithm originally added to wide
integer emulation, which was deleted in D139776. It is much easier
to see why it is correct.
Add runtime tests based on the mlir-vulkan-runner. These run both with
and without umul extension.
Issue: https://github.com/llvm/llvm-project/issues/59563
Reviewed By: antiagainst
Differential Revision: https://reviews.llvm.org/D141085
This allows the MLIR transformer to see the command line options and
make desicions based on them. No change upstream, but my use-case is to
look at the entry point name and type to make sure I can use them.
Differential Revision: https://reviews.llvm.org/D137861
This commit moves MemRef memory space to SPIR-V storage class
conversion out of the main SPIR-V type converter. Now the mapping
should happen as a prelimiary step before performing the final
conversion to SPIR-V. Flows are expect to write their own memory
space mappings like the `MapMemRefStorageClassPass` to handle
memory space mappings according to their needs.
This is needed because SPIR-V is serving multiple client APIs,
including Vulkan and OpenCL. Different client APIs might want
to use different storage classes for buffers in a particular
memory space, e.g., `StorageBuffer` for Vulkan vs. `CrossWorkgroup`
for OpenCL when converting the default 0 memory space. Hardcoding
a specific mapping makes that hard. While it's possible to embed
selection logic further inside the main type converter, it will
make the main type converter even complicated. So it's better to
separate the concerns, as mapping the memory space is really
concretizing the meaning of those numeric memory spaces in the
particular context of SPIR-V lowering.
Reviewed By: kuhar
Differential Revision: https://reviews.llvm.org/D131410
The 'emit_c_wrappers' option in the FuncToLLVM conversion requests C interface
wrappers to be emitted for every builtin function in the module. While this has
been useful to bootstrap the interface, it is problematic in the longer term as
it may unintentionally affect the functions that should retain their existing
interface, e.g., libm functions obtained by lowering math operations (see
D126964 for an example). Since D77314, we have a finer-grain control over
interface generation via an attribute that avoids the problem entirely. Remove
the 'emit_c_wrappers' option. Introduce the '-llvm-request-c-wrappers' pass
that can be run in any pipeline that needs blanket emission of functions to
annotate all builtin functions with the attribute before performing the usual
lowering that accounts for the attribute.
Reviewed By: chelini
Differential Revision: https://reviews.llvm.org/D127952
Use the new pass manager.
This also removes the ability to run arbitrary sets of passes. Not sure if this functionality is used, but it doesn't seem to be tested.
No need to initialize passes outside of constructing the PassBuilder with the new pass manager.
Reland: Fixed custom calls to `-lower-matrix-intrinsics` in integration tests by replacing them with `-O0 -enable-matrix`.
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D123425
Use the new pass manager.
This also removes the ability to run arbitrary sets of passes. Not sure if this functionality is used, but it doesn't seem to be tested.
No need to initialize passes outside of constructing the PassBuilder with the new pass manager.
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D123425
The current StandardToLLVM conversion patterns only really handle
the Func dialect. The pass itself adds patterns for Arithmetic/CFToLLVM, but
those should be/will be split out in a followup. This commit focuses solely
on being an NFC rename.
Aside from the directory change, the pattern and pass creation API have been renamed:
* populateStdToLLVMFuncOpConversionPattern -> populateFuncToLLVMFuncOpConversionPattern
* populateStdToLLVMConversionPatterns -> populateFuncToLLVMConversionPatterns
* createLowerToLLVMPass -> createConvertFuncToLLVMPass
Differential Revision: https://reviews.llvm.org/D120778
StandardToSPIRV currently contains an assortment of patterns converting from
different dialects to SPIRV. This commit splits up StandardToSPIRV into separate
conversions for each of the dialects involved (some of which already exist).
Differential Revision: https://reviews.llvm.org/D120767
The last remaining operations in the standard dialect all revolve around
FuncOp/function related constructs. This patch simply handles the initial
renaming (which by itself is already huge), but there are a large number
of cleanups unlocked/necessary afterwards:
* Removing a bunch of unnecessary dependencies on Func
* Cleaning up the From/ToStandard conversion passes
* Preparing for the move of FuncOp to the Func dialect
See the discussion at https://discourse.llvm.org/t/standard-dialect-the-final-chapter/6061
Differential Revision: https://reviews.llvm.org/D120624
Precursor: https://reviews.llvm.org/D110200
Removed redundant ops from the standard dialect that were moved to the
`arith` or `math` dialects.
Renamed all instances of operations in the codebase and in tests.
Reviewed By: rriddle, jpienaar
Differential Revision: https://reviews.llvm.org/D110797
Conversion to the LLVM dialect is being refactored to be more progressive and
is now performed as a series of independent passes converting different
dialects. These passes may produce `unrealized_conversion_cast` operations that
represent pending conversions between built-in and LLVM dialect types.
Historically, a more monolithic Standard-to-LLVM conversion pass did not need
these casts as all operations were converted in one shot. Previous refactorings
have led to the requirement of running the Standard-to-LLVM conversion pass to
clean up `unrealized_conversion_cast`s even though the IR had no standard
operations in it. The pass must have been also run the last among all to-LLVM
passes, in contradiction with the partial conversion logic. Additionally, the
way it was set up could produce invalid operations by removing casts between
LLVM and built-in types even when the consumer did not accept the uncasted
type, or could lead to cryptic conversion errors (recursive application of the
rewrite pattern on `unrealized_conversion_cast` as a means to indicate failure
to eliminate casts).
In fact, the need to eliminate A->B->A `unrealized_conversion_cast`s is not
specific to to-LLVM conversions and can be factored out into a separate type
reconciliation pass, which is achieved in this commit. While the cast operation
itself has a folder pattern, it is insufficient in most conversion passes as
the folder only applies to the second cast. Without complex legality setup in
the conversion target, the conversion infra will either consider the cast
operations valid and not fold them (a separate canonicalization would be
necessary to trigger the folding), or consider the first cast invalid upon
generation and stop with error. The pattern provided by the reconciliation pass
applies to the first cast operation instead. Furthermore, having a separate
pass makes it clear when `unrealized_conversion_cast`s could not have been
eliminated since it is the only reason why this pass can fail.
Reviewed By: nicolasvasilache
Differential Revision: https://reviews.llvm.org/D109507
After the MemRef has been split out of the Standard dialect, the
conversion to the LLVM dialect remained as a huge monolithic pass.
This is undesirable for the same complexity management reasons as having
a huge Standard dialect itself, and is even more confusing given the
existence of a separate dialect. Extract the conversion of the MemRef
dialect operations to LLVM into a separate library and a separate
conversion pass.
Reviewed By: herhut, silvas
Differential Revision: https://reviews.llvm.org/D105625
"Standard-to-LLVM" conversion is one of the oldest passes in existence. It has
become quite large due to the size of the Standard dialect itself, which is
being split into multiple smaller dialects. Furthermore, several conversion
features are useful for any dialect that is being converted to the LLVM
dialect, which, without this refactoring, creates a dependency from those
conversions to the "standard-to-llvm" one.
Put several of the reusable utilities from this conversion to a separate
library, namely:
- type converter from builtin to LLVM dialect types;
- utility for building and accessing values of LLVM structure type;
- utility for building and accessing values that represent memref in the LLVM
dialect;
- lowering options applicable everywhere.
Additionally, remove the type wrapping/unwrapping notion from the type
converter that is no longer relevant since LLVM types has been reimplemented as
first-class MLIR types.
Reviewed By: pifon2a
Differential Revision: https://reviews.llvm.org/D105534
These patterns have been used as a prerequisite step for lowering
to SPIR-V. But they don't involve SPIR-V dialect ops; they are
pure memref/vector op transformations. Given now we have a dedicated
MemRef dialect, moving them to Memref/Transforms/, which is a more
suitable place to host them, to allow used by others.
This commit just moves code around and renames patterns/passes
accordingly. CMakeLists.txt for existing MemRef libraries are
also improved along the way.
Reviewed By: mravishankar
Differential Revision: https://reviews.llvm.org/D100326
Index type is an integer type of target-specific bitwidth present in many MLIR
operations (loops, memory accesses). Converting values of this type to
fixed-size integers has always been problematic. Introduce a data layout entry
to specify the bitwidth of `index` in a given layout scope, defaulting to 64
bits, which is a commonly used assumption, e.g., in constants.
Port builtin-to-LLVM type conversion to use this data layout entry when
converting `index` type and untie it from pointer size. This is particularly
relevant for GPU targets. Keep a possibility to forcibly override the index
type in lowerings.
Depends On D98525
Reviewed By: herhut
Differential Revision: https://reviews.llvm.org/D98937
The commit in question changed the syntax but did not update the runner
tests. This also required registering the MemRef dialect for custom
parser to work correctly.
There is no need for the interface implementations to be exposed, opaque
registration functions are sufficient for all users, similarly to passes.
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D97852
The existing approach to translation to the LLVM IR relies on a single
translation supporting the base LLVM dialect, extensible through inheritance to
support intrinsic-based dialects also derived from LLVM IR such as NVVM and
AVX512. This approach does not scale well as it requires additional
translations to be created for each new intrinsic-based dialect and does not
allow them to mix in the same module, contrary to the rest of the MLIR
infrastructure. Furthermore, OpenMP translation ingrained itself into the main
translation mechanism.
Start refactoring the translation to LLVM IR to operate using dialect
interfaces. Each dialect that contains ops translatable to LLVM IR can
implement the interface for translating them, and the top-level translation
driver can operate on interfaces without knowing about specific dialects.
Furthermore, the delayed dialect registration mechanism allows one to avoid a
dependency on LLVM IR in the dialect that is translated to it by implementing
the translation as a separate library and only registering it at the client
level.
This change introduces the new mechanism and factors out the translation of the
"main" LLVM dialect. The remaining dialects will follow suit.
Reviewed By: nicolasvasilache
Differential Revision: https://reviews.llvm.org/D96503
Historically, JitRunner has been registering all available dialects with the
context and depending on them without the real need. Make it take a registry
that contains only the dialects that are expected in the input and stop linking
in all dialects.
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D96436
This commit renames various SPIR-V related conversion files for
consistency. It drops the "Convert" prefix to various files and
fixes various comment headers.
Reviewed By: hanchung, ThomasRaoux
Differential Revision: https://reviews.llvm.org/D93489
This commit shuffles SPIR-V code around to better follow MLIR
convention. Specifically,
* Created IR/, Transforms/, Linking/, and Utils/ subdirectories and
moved suitable code inside.
* Created SPIRVEnums.{h|cpp} for SPIR-V C/C++ enums generated from
SPIR-V spec. Previously they are cluttered inside SPIRVTypes.{h|cpp}.
* Fixed include guards in various header files (both .h and .td).
* Moved serialization tests under test/Target/SPIRV.
* Renamed TableGen backend -gen-spirv-op-utils into -gen-spirv-attr-utils
as it is only generating utility functions for attributes.
Reviewed By: mravishankar
Differential Revision: https://reviews.llvm.org/D93407
The JitRunner library is logically very close to the execution engine,
and shares similar dependencies.
find -name "*.cpp" -exec sed -i "s/Support\/JitRunner/ExecutionEngine\/JitRunner/" "{}" \;
Differential Revision: https://reviews.llvm.org/D79899
A memref argument is converted into a pointer-to-struct argument
of type `{T*, T*, i64, i64[N], i64[N]}*` in the wrapper function,
where T is the converted element type and N is the memref rank.
Differential Revision: https://reviews.llvm.org/D76059
This commits changes the definition of spv.module to use the #spv.vce
attribute for specifying (version, capabilities, extensions) triple
so that we can have better API and custom assembly form. Since now
we have proper modelling of the triple, (de)serialization is wired up
to use them.
With the new UpdateVCEPass, we don't need to manually specify the
required extensions and capabilities anymore when creating a spv.module.
One just need to call UpdateVCEPass before serialization to get the
needed version/extensions/capabilities.
Differential Revision: https://reviews.llvm.org/D75872
* Adds GpuLaunchFuncToVulkanLaunchFunc conversion pass.
* Moves a serialization of the `spirv::Module` from LaunchFuncToVulkanCalls pass to newly created pass.
* Updates LaunchFuncToVulkanCalls instrumentation pass, adds `initVulkan` and `deinitVulkan` runtime calls.
* Adds `bindResource` call to bind specifc resource by the given descriptor set and descriptor binding.
* Eliminates static construction and desctruction of `VulkanRuntimeManager`.
Differential Revision: https://reviews.llvm.org/D75192
Previously, lib/Support/JitRunner.cpp was essentially a complete application,
performing all library initialization, along with dealing with command line
arguments and actually running passes. This differs significantly from
mlir-opt and required a dependency on InitAllDialects.h. This dependency
is significant, since it requires a dependency on all of the resulting
libraries.
This patch refactors the code so that tools are responsible for library
initialization, including registering all dialects, prior to calling
JitRunnerMain. This places the concern about what dialect to support
with the end application, enabling more extensibility at the cost of
a small amount of code duplication between tools. It also fixes
BUILD_SHARED_LIBS=on.
Differential Revision: https://reviews.llvm.org/D75272
Add an initial version of mlir-vulkan-runner execution driver.
A command line utility that executes a MLIR file on the Vulkan by
translating MLIR GPU module to SPIR-V and host part to LLVM IR before
JIT-compiling and executing the latter.
Differential Revision: https://reviews.llvm.org/D72696
