The function should use the by-ref SBError argument instead of creating
a new one. This code has been here since ~forever, and was probably
copied from methods which return an SBError result (where one needs to
create a local variable).
This patch removes all of the Set.* methods from Status.
This cleanup is part of a series of patches that make it harder use the
anti-pattern of keeping a long-lives Status object around and updating
it while dropping any errors it contains on the floor.
This patch is largely NFC, the more interesting next steps this enables
is to:
1. remove Status.Clear()
2. assert that Status::operator=() never overwrites an error
3. remove Status::operator=()
Note that step (2) will bring 90% of the benefits for users, and step
(3) will dramatically clean up the error handling code in various
places. In the end my goal is to convert all APIs that are of the form
` ResultTy DoFoo(Status& error)
`
to
` llvm::Expected<ResultTy> DoFoo()
`
How to read this patch?
The interesting changes are in Status.h and Status.cpp, all other
changes are mostly
` perl -pi -e 's/\.SetErrorString/ = Status::FromErrorString/g' $(git
grep -l SetErrorString lldb/source)
`
plus the occasional manual cleanup.
Cppcheck recommends using a const reference for range variables in a
for-each loop.
This avoids unnecessary copying of elements, improving performance.
Caught by cppcheck -
lldb/source/API/SBBreakpoint.cpp:717:22: performance: Range variable
'name' should be declared as const reference. [iterateByValue]
lldb/source/API/SBTarget.cpp:1150:15: performance: Range variable 'name'
should be declared as const reference. [iterateByValue]
lldb/source/Breakpoint/Breakpoint.cpp:888:26: performance: Range
variable 'name' should be declared as const reference. [iterateByValue]
lldb/source/Breakpoint/BreakpointIDList.cpp:262:26: performance: Range
variable 'name' should be declared as const reference. [iterateByValue]
Fix#91213Fix#91217Fix#91219Fix#91220
This patch provides the initial implementation for the "Step Into
Specific/Step In Targets" feature in VSCode DAP.
The implementation disassembles all the call instructions in step range
and try to resolve operand name (assuming one operand) using debug info.
Later, the call target function name is chosen by end user and specified
in the StepInto() API call.
It is v1 because of using the existing step in target function name API.
This implementation has several limitations:
* Won't for indirect/virtual function call -- in most cases, our
disassembler won't be able to solve the indirect call target
address/name.
* Won't work for target function without debug info -- if the target
function has symbol but not debug info, the existing
ThreadPlanStepInRange won't stop.
* Relying on function names can be fragile -- if there is some middle
glue/thunk code, our disassembler can only resolve the glue/thunk code's
name not the real target function name. It can be fragile to depend
compiler/linker emits the same names for both.
* Does not support step into raw address call sites -- it is a valid
scenario that in Visual Studio debugger, user can explicitly choose a
raw address to step into which land in the function without debug
info/symbol, then choose UI to load the debug info on-demand for that
module/frame to continue exploring.
A more reliable design could be extending the ThreadPlanStepInRange to
support step in based on call-site instruction offset/PC which I will
propose in next iteration.
---------
Co-authored-by: jeffreytan81 <jeffreytan@fb.com>
These are hardcoded strings that are already present in the data section
of the binary, no need to immediately place them in the ConstString
StringPools. Lots of code still calls `GetBroadcasterClass` and places
the return value into a ConstString. Changing that would be a good
follow-up.
Additionally, calls to these functions are still wrapped in ConstStrings
at the SBAPI layer. This is because we must guarantee the lifetime of
all strings handed out publicly.
This patch revives the effort to get this Phabricator patch into
upstream:
https://reviews.llvm.org/D137900
This patch was accepted before in Phabricator but I found some
-gsimple-template-names issues that are fixed in this patch.
A fixed up version of the description from the original patch starts
now.
This patch started off trying to fix Module::FindFirstType() as it
sometimes didn't work. The issue was the SymbolFile plug-ins didn't do
any filtering of the matching types they produced, and they only looked
up types using the type basename. This means if you have two types with
the same basename, your type lookup can fail when only looking up a
single type. We would ask the Module::FindFirstType to lookup "Foo::Bar"
and it would ask the symbol file to find only 1 type matching the
basename "Bar", and then we would filter out any matches that didn't
match "Foo::Bar". So if the SymbolFile found "Foo::Bar" first, then it
would work, but if it found "Baz::Bar" first, it would return only that
type and it would be filtered out.
Discovering this issue lead me to think of the patch Alex Langford did a
few months ago that was done for finding functions, where he allowed
SymbolFile objects to make sure something fully matched before parsing
the debug information into an AST type and other LLDB types. So this
patch aimed to allow type lookups to also be much more efficient.
As LLDB has been developed over the years, we added more ways to to type
lookups. These functions have lots of arguments. This patch aims to make
one API that needs to be implemented that serves all previous lookups:
- Find a single type
- Find all types
- Find types in a namespace
This patch introduces a `TypeQuery` class that contains all of the state
needed to perform the lookup which is powerful enough to perform all of
the type searches that used to be in our API. It contain a vector of
CompilerContext objects that can fully or partially specify the lookup
that needs to take place.
If you just want to lookup all types with a matching basename,
regardless of the containing context, you can specify just a single
CompilerContext entry that has a name and a CompilerContextKind mask of
CompilerContextKind::AnyType.
Or you can fully specify the exact context to use when doing lookups
like: CompilerContextKind::Namespace "std"
CompilerContextKind::Class "foo"
CompilerContextKind::Typedef "size_type"
This change expands on the clang modules code that already used a
vector<CompilerContext> items, but it modifies it to work with
expression type lookups which have contexts, or user lookups where users
query for types. The clang modules type lookup is still an option that
can be enabled on the `TypeQuery` objects.
This mirrors the most recent addition of type lookups that took a
vector<CompilerContext> that allowed lookups to happen for the
expression parser in certain places.
Prior to this we had the following APIs in Module:
```
void
Module::FindTypes(ConstString type_name, bool exact_match, size_t max_matches,
llvm::DenseSet<lldb_private::SymbolFile *> &searched_symbol_files,
TypeList &types);
void
Module::FindTypes(llvm::ArrayRef<CompilerContext> pattern, LanguageSet languages,
llvm::DenseSet<lldb_private::SymbolFile *> &searched_symbol_files,
TypeMap &types);
void Module::FindTypesInNamespace(ConstString type_name,
const CompilerDeclContext &parent_decl_ctx,
size_t max_matches, TypeList &type_list);
```
The new Module API is much simpler. It gets rid of all three above
functions and replaces them with:
```
void FindTypes(const TypeQuery &query, TypeResults &results);
```
The `TypeQuery` class contains all of the needed settings:
- The vector<CompilerContext> that allow efficient lookups in the symbol
file classes since they can look at basename matches only realize fully
matching types. Before this any basename that matched was fully realized
only to be removed later by code outside of the SymbolFile layer which
could cause many types to be realized when they didn't need to.
- If the lookup is exact or not. If not exact, then the compiler context
must match the bottom most items that match the compiler context,
otherwise it must match exactly
- If the compiler context match is for clang modules or not. Clang
modules matches include a Module compiler context kind that allows types
to be matched only from certain modules and these matches are not needed
when d oing user type lookups.
- An optional list of languages to use to limit the search to only
certain languages
The `TypeResults` object contains all state required to do the lookup
and store the results:
- The max number of matches
- The set of SymbolFile objects that have already been searched
- The matching type list for any matches that are found
The benefits of this approach are:
- Simpler API, and only one API to implement in SymbolFile classes
- Replaces the FindTypesInNamespace that used a CompilerDeclContext as a
way to limit the search, but this only worked if the TypeSystem matched
the current symbol file's type system, so you couldn't use it to lookup
a type in another module
- Fixes a serious bug in our FindFirstType functions where if we were
searching for "foo::bar", and we found a "baz::bar" first, the basename
would match and we would only fetch 1 type using the basename, only to
drop it from the matching list and returning no results
Add a new API in SBTarget to Load Core from a SBFile.
This will enable a target to load core from a file descriptor.
So that in coredumper, we don't need to write core file to disk, instead
we can pass the input file descriptor to lldb directly.
Test:
```
(lldb) script
Python Interactive Interpreter. To exit, type 'quit()', 'exit()' or Ctrl-D.
>>> file_object = open("/home/hyubo/210hda79ms32sr0h", "r")
>>> fd=file_object.fileno()
>>> file = lldb.SBFile(fd,'r', True)
>>> error = lldb.SBError()
>>> target = lldb.debugger.CreateTarget(None)
>>> target.LoadCore(file,error)
SBProcess: pid = 56415, state = stopped, threads = 1
```
This completes the conversion of LocateSymbolFile into a SymbolLocator
plugin. The only remaining function is DownloadSymbolFileAsync which
doesn't really fit into the plugin model, and therefore moves into the
SymbolLocator class, while still relying on the plugins to do the
underlying work.
This builds on top of the work started in c3a302d to convert
LocateSymbolFile to a SymbolLocator plugin. This commit moves
DownloadObjectAndSymbolFile.
This reverts commit a7b78cac9a77e3ef6bbbd8ab1a559891dc693401.
With updates to the tests.
TestWatchTaggedAddress.py: Updated the expected watchpoint types,
though I'm not sure there should be a differnt default for the two
ways of setting them, that needs to be confirmed.
TestStepOverWatchpoint.py: Skipped this everywhere because I think
what used to happen is you couldn't put 2 watchpoints on the same
address (after alignment). I guess that this is now allowed because
modify watchpoints aren't accounted for, but likely should be.
Needs investigating.
This reverts commit 933ad5c897ee366759a54869b35b2d7285a92137.
This caused 1 test failure and an unexpected pass on AArch64 Linux:
https://lab.llvm.org/buildbot/#/builders/96/builds/45765
Wasn't reported because the bot was already red at the time.
Watchpoints in lldb can be either 'read', 'write', or 'read/write'. This
is exposing the actual behavior of hardware watchpoints. gdb has a
different behavior: a "write" type watchpoint only stops when the
watched memory region *changes*.
A user is using a watchpoint for one of three reasons:
1. Want to find what is changing/corrupting this memory.
2. Want to find what is writing to this memory.
3. Want to find what is reading from this memory.
I believe (1) is the most common use case for watchpoints, and it
currently can't be done in lldb -- the user needs to continue every time
the same value is written to the watched-memory manually. I think gdb's
behavior is the correct one. There are some use cases where a developer
wants to find every function that writes/reads to/from a memory region,
regardless of value, I want to still allow that functionality.
This is also a bit of groundwork for my large watchpoint support
proposal
https://discourse.llvm.org/t/rfc-large-watchpoint-support-in-lldb/72116
where I will be adding support for AArch64 MASK watchpoints which watch
power-of-2 memory regions. A user might ask to watch 24 bytes, and a
MASK watchpoint stub can do this with a 32-byte MASK watchpoint if it is
properly aligned. And we need to ignore writes to the final 8 bytes of
that watched region, and not show those hits to the user.
This patch adds a new 'modify' watchpoint type and it is the default.
Re-landing this patch after addressing testsuite failures found in CI on
Linux, Intel machines, and windows.
rdar://108234227
Watchpoints in lldb can be either 'read', 'write', or 'read/write'. This
is exposing the actual behavior of hardware watchpoints. gdb has a
different behavior: a "write" type watchpoint only stops when the
watched memory region *changes*.
A user is using a watchpoint for one of three reasons:
1. Want to find what is changing/corrupting this memory.
2. Want to find what is writing to this memory.
3. Want to find what is reading from this memory.
I believe (1) is the most common use case for watchpoints, and it
currently can't be done in lldb -- the user needs to continue every time
the same value is written to the watched-memory manually. I think gdb's
behavior is the correct one. There are some use cases where a developer
wants to find every function that writes/reads to/from a memory region,
regardless of value, I want to still allow that functionality.
This is also a bit of groundwork for my large watchpoint support
proposal
https://discourse.llvm.org/t/rfc-large-watchpoint-support-in-lldb/72116
where I will be adding support for AArch64 MASK watchpoints which watch
power-of-2 memory regions. A user might ask to watch 24 bytes, and a
MASK watchpoint stub can do this with a 32-byte MASK watchpoint if it is
properly aligned. And we need to ignore writes to the final 8 bytes of
that watched region, and not show those hits to the user.
This patch adds a new 'modify' watchpoint type and it is the default.
rdar://108234227
Make SBTarget::AddModule possibly call out to an external program to
find the binary by UUID if it can't be found more easily, the same
way `target modules add -u ...` works from the commandline.
If the Target does not have an architecture set yet, use the
Module's Arch to initialize it. Allows an API writer to create
a target with no arch, and inherit it from the first binary they
load with AddModules.
Differential Revision: https://reviews.llvm.org/D157659
rdar://113657555
Fix incorrect uses of formatv specifiers in LLDB_LOG. Unlike Python,
arguments must be numbered. All the affected log statements take
llvm:Errors so use the LLDB_LOG_ERROR macro instead.
Differential revision: https://reviews.llvm.org/D154532
This patch add the ability for the user to set a label for a target.
This can be very useful when debugging targets with the same executables
in the same session.
Labels can be set either at the target creation in the command
interpreter or at any time using the SBAPI.
Target labels show up in the `target list` output, following the target
index, and they also allow the user to switch targets using them.
rdar://105016191
Differential Revision: https://reviews.llvm.org/D151859
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
There were two bugs here.
eMatchTypeStartsWith searched for "symbol_name" by adding ".*" to the
end of the symbol name and treating that as a regex, which isn't
actually a regex for "starts with". The ".*" is in fact a no-op. When
we finally get to comparing the name, we compare against whatever form
of the name was in the accelerator table. But for C++ that might be
the mangled name. We should also try demangled names here, since most
users are going the see demangled not mangled names. I fixed these
two bugs and added a bunch of tests for FindGlobalVariables.
This change is in the DWARF parser code, so there may be a similar bug
in PDB, but the test for this was already skipped for Windows, so I
don't know about this.
You might theoretically need to do this Mangled comparison in
DWARFMappedHash::MemoryTable::FindByName
except when we have names we always chop them before looking them up
so I couldn't see any code paths that fail without that change. So I
didn't add that to this patch.
Differential Revision: https://reviews.llvm.org/D151940
LLDB should guarantee that the strings returned by SBAPI methods
live forever. I went through every method that returns a string and made
sure that it was added to the ConstString StringPool before returning if
it wasn't obvious that it was already doing so.
I've also updated the docs to document this behavior.
Differential Revision: https://reviews.llvm.org/D150804
Currently, SBTarget::SetModuleLoadAddress does not accept large slides
needed to load images in high memory. This function should always have
taken an unsigned as the slide, as it immediately passes it to
Target::SetSectionLoadAddress which takes an unsigned.
This patch adds an overload and exposes that to SWIG instead of the
signed variant. I've marked the signed variant as deprecated and added
check that the slide is positive.
rdar://101355155
Differential revision: https://reviews.llvm.org/D147482
This patch adds process attach capabilities to the ScriptedProcess
plugin. This doesn't really expects a PID or process name, since the
process state is already script, however, this allows to create a
scripted process without requiring to have an executuble in the target.
In order to do so, this patch also turns the scripted process related
getters and setters from the `ProcessLaunchInfo` and
`ProcessAttachInfo` classes to a `ScriptedMetadata` instance and moves
it in the `ProcessInfo` class, so it can be accessed interchangeably.
This also adds the necessary SWIG wrappers to convert the internal
`Process{Attach,Launch}InfoSP` into a `SB{Attach,Launch}Info` to pass it
as argument the scripted process python implementation and convert it
back to the internal representation.
rdar://104577406
Differential Revision: https://reviews.llvm.org/D143104
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
initial stop. The code was using PrivateResume when it should have
used Resume.
This was allowing expression evaluation while the target was running,
and though that was caught a litle later on, we should never have gotten
that far. To make sure that this is caught immediately I made an error
SBValue when this happens, and test that we get this error.
Differential Revision: https://reviews.llvm.org/D144665
When a process gets restarted TypeSystem objects associated with it
may get deleted, and any CompilerType objects holding on to a
reference to that type system are a use-after-free in waiting. Because
of the SBAPI, we don't have tight control over where CompilerTypes go
and when they are used. This is particularly a problem in the Swift
plugin, where the scratch TypeSystem can be restarted while the
process is still running. The Swift plugin has a lock to prevent
abuse, but where there's a lock there can be bugs.
This patch changes CompilerType to store a std::weak_ptr<TypeSystem>.
Most of the std::weak_ptr<TypeSystem>* uglyness is hidden by
introducing a wrapper class CompilerType::WrappedTypeSystem that has a
dyn_cast_or_null() method. The only sites that need to know about the
weak pointer implementation detail are the ones that deal with
creating TypeSystems.
rdar://101505232
Differential Revision: https://reviews.llvm.org/D136650
They don't require that the memory return address be restored prior to
function exit, so there's no guarantee the value is correct. It's better
to return nothing that something that's not accurate.
Differential Revision: https://reviews.llvm.org/D121348
Most of our code was including Log.h even though that is not where the
"lldb" log channel is defined (Log.h defines the generic logging
infrastructure). This worked because Log.h included Logging.h, even
though it should.
After the recent refactor, it became impossible the two files include
each other in this direction (the opposite inclusion is needed), so this
patch removes the workaround that was put in place and cleans up all
files to include the right thing. It also renames the file to LLDBLog to
better reflect its purpose.
Remove the last remaining references to the reproducers from the
instrumentation. This patch renames the relevant files and macros.
Differential revision: https://reviews.llvm.org/D117712
This diff is adding the capping_size determination for the list and forward list, to limit the number of children to be displayed. Also it modifies and unifies tests for libcxx and libstdcpp list data formatter.
Reviewed By: wallace
Differential Revision: https://reviews.llvm.org/D114433
The amount of roundtrips between StringRefs, ConstStrings and std::strings is
getting a bit out of hand, this patch avoid the unnecessary roundtrips.
Reviewed By: wallace, aprantl
Differential Revision: https://reviews.llvm.org/D112863
The new module stats adds the ability to measure the time it takes to parse and index the symbol tables for each module, and reports modules statistics in the output of "statistics dump" along with the path, UUID and triple of the module. The time it takes to parse and index the symbol tables are also aggregated into new top level key/value pairs at the target level.
Differential Revision: https://reviews.llvm.org/D112279
This patch is a smaller version of a previous patch https://reviews.llvm.org/D110804.
This patch modifies the output of "statistics dump" to be able to get stats from the current target. It adds 3 new stats as well. The output of "statistics dump" is now emitted as JSON so that it can be used to track performance and statistics and the output could be used to populate a database that tracks performance. Sample output looks like:
(lldb) statistics dump
{
"expressionEvaluation": {
"failures": 0,
"successes": 0
},
"firstStopTime": 0.34164492800000001,
"frameVariable": {
"failures": 0,
"successes": 0
},
"launchOrAttachTime": 0.31969605400000001,
"targetCreateTime": 0.0040863039999999998
}
The top level keys are:
"expressionEvaluation" which replaces the previous stats that were emitted as plain text. This dictionary contains the success and fail counts.
"frameVariable" which replaces the previous stats for "frame variable" that were emitted as plain text. This dictionary contains the success and fail counts.
"targetCreateTime" contains the number of seconds it took to create the target and load dependent libraries (if they were enabled) and also will contain symbol preloading times if that setting is enabled.
"launchOrAttachTime" is the time it takes from when the launch/attach is initiated to when the first private stop occurs.
"firstStopTime" is the time in seconds that it takes to stop at the first stop that is presented to the user via the LLDB interface. This value will only have meaning if you set a known breakpoint or stop location in your code that you want to measure as a performance test.
This diff is also meant as a place to discuess what we want out of the "statistics dump" command before adding more funcionality. It is also meant to clean up the previous code that was storting statistics in a vector of numbers within the lldb_private::Target class.
Differential Revision: https://reviews.llvm.org/D111686
.. and reduce the scope of others. They don't follow llvm coding
standards (which say they should be used only when the same effect
cannot be achieved with the static keyword), and they set a bad example.
Rather than passing two booleans around, which is especially error prone
with them being next to each other, use a struct with named fields
instead.
Differential revision: https://reviews.llvm.org/D107295
This adds a basic SB API for creating and stopping traces.
Note: This doesn't add any APIs for inspecting individual instructions. That'd be a more complicated change and it might be better to enhande the dump functionality to output the data in binary format. I'll leave that for a later diff.
This also enhances the existing tests so that they test the same flow using both the command interface and the SB API.
I also did some cleanup of legacy code.
Differential Revision: https://reviews.llvm.org/D103500
Commiting this patch for Augusto Noronha who is getting set
up still.
This patch changes Target::ReadMemory so the default behavior
when a read is in a Section that is read-only is to fetch the
data from the local binary image, instead of reading it from
memory. Update all callers to use their old preferences
(the old prefer_file_cache bool) using the new API; we should
revisit these calls and see if they really intend to read
live memory, or if reading from a read-only Section would be
equivalent and important for performance-sensitive cases.
rdar://30634422
Differential revision: https://reviews.llvm.org/D100338
This patch adds a new command options to the CommandObjectProcessLaunch
for scripted processes.
Among the options, the user need to specify the class name managing the
scripted process. The user can also use a key-value dictionary holding
arbitrary data that will be passed to the managing class.
This patch also adds getters and setters to `SBLaunchInfo` for the
class name managing the scripted process and the dictionary.
rdar://65508855
Differential Review: https://reviews.llvm.org/D95710
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
It seems that recording fundamental return type is bogus.
This can trigger asserts when running a test with reproducers so this
patch updates the `SBTarget::IsLoaded` test to stop recording them.
Differential Revision: https://reviews.llvm.org/D95686
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch adds an `SBTarget::IsLoaded(const SBModule&) const` endpoint
to lldb's Scripting Bridge API. As the name suggests, it will allow the
user to know if the module is loaded in a specific target.
rdar://37957625
Differential Review: https://reviews.llvm.org/D95686
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch exposes the Target::CreateBreakpoint overload with the
boolean argument to move to the neareast code to the SBAPI.
This is useful when creating column breakpoints to restrict lldb's
resolution to the pointed source location, preventing it to go to the next
line.
rdar://72196842
Differential Revision: https://reviews.llvm.org/D93266
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
