In an effort to get rid of VPUnrollPartAccessor and directly unroll
recipes, start by directly unrolling VectorPointerRecipe, allowing for
VPlan-based simplifications and simplification of the corresponding
execute.
After https://github.com/llvm/llvm-project/pull/153643, there may be a
BranchOnCond with constant condition in the entry block.
Simplify those in removeBranchOnConst. This removes a number of
redundant conditional branch from entry blocks.
In some cases, it may also make the original scalar loop unreachable,
because we know it will never execute. In that case, we need to remove
the loop from LoopInfo, because all unreachable blocks may dominate each
other, making LoopInfo invalid. In those cases, we can also completely
remove the loop, for which I'll share a follow-up patch.
Depends on https://github.com/llvm/llvm-project/pull/153643.
PR: https://github.com/llvm/llvm-project/pull/154510
The motivation for this patch is to close the gap between the
VPlan-based CSE and the legacy CSE, to make it easier to remove the
legacy CSE. Before this patch, stubbing out the legacy CSE leads to 22
test failures, and after this patch, there are only 12 failures, and all
of them seem to have a single root cause:
VPlanTransforms::createInterleaveGroups() and
VPInterleaveGroup::execute(). The improvements from this patch are of
course welcome.
While developing the patch, a miscompile was found when GEP
source-element-types differ, and this has been fixed.
Co-authored-by: Florian Hahn <flo@fhahn.com>
Co-authored-by: Luke Lau <luke@igalia.com>
This patch adds a new VPlan-based addMinimumIterationCheck, which
replaced the ILV version for the non-epilogue case.
The VPlan-based version constructs a SCEV expression to compute the
minimum iterations, use that to check if the check is known true or
false. Otherwise it creates a VPExpandSCEV recipe and emits a
compare-and-branch.
When using epilogue vectorization, we still need to create the minimum
trip-count-check during the legacy skeleton creation. The patch moves
the definitions out of ILV.
PR: https://github.com/llvm/llvm-project/pull/153643
Materialize VF and VFxUF computation using VPInstruction
instead of directly creating IR.
This is one of the last few steps needed to model the full vector
skeleton in VPlan.
This is mostly NFC, although in some cases we remove some unused
computations.
PR: https://github.com/llvm/llvm-project/pull/152879
Materialize the vector trip count computation using VPInstruction
instead of directly creating IR. This is one of the last few steps
needed to model the full vector skeleton in VPlan. It also simplifies
vector-trip count computations for scalable vectors, as we can re-use
the UF x VF computation.
PR: https://github.com/llvm/llvm-project/pull/151925
VPVectorPointer for part 0 is just the pointer operand. Simplify it
after unrolling. This removes a large number of redundant GEPs with
index 0.
PR: https://github.com/llvm/llvm-project/pull/149735
For more powerful folding with operands that are not necessarily
all-constant, use InstSimplifyFolder instead of TargetFolder in
tryToConstantFold, and rename the function tryToFoldLiveIns.
Update initial construction to connect the Plan's entry to the scalar
preheader during initial construction. This moves a small part of the
skeleton creation out of ILV and will also enable replacing
VPInstruction::ResumePhi with regular VPPhi recipes.
Resume phis need 2 incoming values to start with, the second being the
bypass value from the scalar ph (and used to replicate the incoming
value for other bypass blocks). Adding the extra edge ensures we
incoming values for resume phis match the incoming blocks.
PR: https://github.com/llvm/llvm-project/pull/140132
Similarly to other recipes, update VPScalarIVStepsRecipe to also take
the runtime VF as argument. This removes some unnecessary runtime VF
computations for scalable vectors. It will also allow dropping the
UF == 1 restriction for narrowing interleave groups required in
577631f0a528.
Follow-up to dfca6c0d3bf9d1a056 to extend isUnrolled handle any unrolled
VPlan, which means there's a single UF, but it will be > 1 if unrolling
took place.
Instead of executing the whole entry VPIRBB twice, first only execute
the VPExpandSCEVRecipes and replace their uses with the expanded
VPValue, which will be a live-in. This allows removing special logic in
VPExpandSCEVRecipe to support executing twice and allows moving the
ExpandedSCEVs map out of VPTransformState.
It will also allow adding other recipes to the entry VPBB in the future.
Create a IR BB directly for the middle.block, instead of creating the IR
BB during skeleton creation and then replacing the middle VPBB with a
VPIRBB.
This moves another part of skeleton creation to VPlan and simplififes
the code slightly by removing code to disconnect the middle block and
vector preheader + the corresponding DT update.
NFC modulo IR block naming and block creation order, which changes the
IR names for the blocks.
Update optimizeForVFAndUF to completely remove the vector loop region
when possible. At the moment, we cannot remove the region if it contains
* widened IVs: the recipe is needed to generate the step vector
* reductions: ComputeReductionResults requires the reduction phi recipe
for codegen.
Both cases can be addressed by more explicit modeling.
The patch also includes a number of updates to allow executing VPlans
without a vector loop region.
Depends on https://github.com/llvm/llvm-project/pull/110004
As a first step to move towards modeling the full skeleton in VPlan,
start by wrapping IR blocks created during legacy skeleton creation in
VPIRBasicBlocks and hook them into the VPlan. This means the skeleton
CFG is represented in VPlan, just before execute. This allows moving
parts of skeleton creation into recipes in the VPBBs gradually.
Note that this allows retiring some manual DT updates, as this will be
handled automatically during VPlan execution.
PR: https://github.com/llvm/llvm-project/pull/114292
This moves printing of the final VPlan to ::execute. This ensures the
final VPlan is printed, including recipes that get introduced by late,
lowering transforms and skeleton construction.
Split off from https://github.com/llvm/llvm-project/pull/114292, to
simplify the diff.
Update VPlan to include the scalar loop header. This allows retiring
VPLiveOut, as the remaining live-outs can now be handled by adding
operands to the wrapped phis in the scalar loop header.
Note that the current version only includes the scalar loop header, no
other loop blocks and also does not wrap it in a region block.
PR: https://github.com/llvm/llvm-project/pull/109975
This patch implements explicit unrolling by UF as VPlan transform. In
follow up patches this will allow simplifying VPTransform state (no need
to store unrolled parts) as well as recipe execution (no need to
generate code for multiple parts in an each recipe). It also allows for
more general optimziations (e.g. avoid generating code for recipes that
are uniform-across parts).
It also unifies the logic dealing with unrolled parts in a single place,
rather than spreading it out across multiple places (e.g. VPlan post
processing for header-phi recipes previously.)
In the initial implementation, a number of recipes still take the
unrolled part as additional, optional argument, if their execution
depends on the unrolled part.
The computation for start/step values for scalable inductions changed
slightly. Previously the step would be computed as scalar and then
splatted, now vscale gets splatted and multiplied by the step in a
vector mul.
This has been split off https://github.com/llvm/llvm-project/pull/94339
which also includes changes to simplify VPTransfomState and recipes'
::execute.
The current version mostly leaves existing ::execute untouched and
instead sets VPTransfomState::UF to 1.
A follow-up patch will clean up all references to VPTransformState::UF.
Another follow-up patch will simplify VPTransformState to only store a
single vector value per VPValue.
PR: https://github.com/llvm/llvm-project/pull/95842
Add a new VPIRInstruction recipe to wrap existing IR instructions not to
be modified during execution, execept for PHIs. For PHIs, a single
VPValue
operand is allowed, and it is used to add a new incoming value for the
single predecessor VPBB. Expect PHIs, VPIRInstructions cannot have any
operands.
Depends on https://github.com/llvm/llvm-project/pull/100658.
PR: https://github.com/llvm/llvm-project/pull/100735
This patch moves branch condition creation to enter the scalar epilogue
loop to VPlan. Modeling the branch in the middle block also requires
modeling the successor blocks. This is done using the recently
introduced VPIRBasicBlock.
Note that the middle.block is still created as part of the skeleton and
then patched in during VPlan execution. Unfortunately the skeleton needs
to create the middle.block early on, as it is also used for induction
resume value creation and is also needed to properly update the
dominator tree during skeleton creation.
After this patch lands, I plan to move induction resume value and phi
node creation in the scalar preheader to VPlan. Once that is done, we
should be able to create the middle.block in VPlan directly.
This is a re-worked version based on the earlier
https://reviews.llvm.org/D150398 and the main change is the use of
VPIRBasicBlock.
Depends on https://github.com/llvm/llvm-project/pull/92525
PR: https://github.com/llvm/llvm-project/pull/92651
Add a new PtrAdd opcode to VPInstruction that corresponds to
IRBuilder::CreatePtrAdd, which creates a GEP with source element type
i8.
This is then used to model scalarizing VPWidenPointerInductionRecipe by
introducing scalar-steps to model the index increment followed by a
PtrAdd.
Note that PtrAdd needs to be able to generate code for only the first
lane or for all lanes. This may warrant introducing a separate recipe
for scalarizing that can be created without relying on the underlying
IR.
Depends on https://github.com/llvm/llvm-project/pull/80271
PR: https://github.com/llvm/llvm-project/pull/83068
Some optimizations are apply after UF and VF have been chosen. This
patch adds an extra print of the final VPlan just before
codegen/execution.
In the future, there will be additional transforms that are applied
later (interleaving for example).
PR: https://github.com/llvm/llvm-project/pull/82269
