The proposal in D56796 may cross the line because we're trying to avoid vectorization
transforms in generic DAG combining. So this is an alternate, later, x86-specific
translation of that patch.
There are several potential follow-ups to enhance this:
1. Allow extraction from non-zero element index.
2. Peek through extends of smaller width integers.
3. Support x86-specific conversion opcodes like X86ISD::CVTSI2P
Differential Revision: https://reviews.llvm.org/D56864
llvm-svn: 353302
We now print the implicit %st register on these instruction, but since they occur at the end of the line, FileCheck didn't see they were missing.
llvm-svn: 353222
Ensure the XOR in the waterfall loop for indirect addressing is considered a terminator.
Differential Revision: https://reviews.llvm.org/D57703
llvm-svn: 353207
The v2i64 argument is lowered to a bitcast of v4i32 build_vector.
This would then attempt to use the i32-element as the source of the
vector truncate. This really would need to collect 2 elements from the
build_vector to produce the intended truncate.
llvm-svn: 353202
rL352997 enabled ZERO_EXTEND from non-shuffle-able value types. I've disabled it for now to fix a regression identified by @asbirlea until I can fix this properly.
llvm-svn: 353198
We can't outline BTI instructions, because they need to be the very first
instruction executed after an indirect call or branch. If we outline them, then
an indirect call might go to the branch to the outlined function, which will
fault.
Differential revision: https://reviews.llvm.org/D57753
llvm-svn: 353190
If we have broadcasts of different vector widths, keep the longest vector width and extract subvectors for the shorter vectors (which should be free).
Differential Revision: https://reviews.llvm.org/D57663
llvm-svn: 353154
Summary:
We don't currently map these constraints to physical register numbers so they don't make it to the MachineIR representation of inline assembly.
This could have problems for proper dependency tracking in the machine schedulers though I don't have a test case that shows that.
Reviewers: rnk
Reviewed By: rnk
Subscribers: eraman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57641
llvm-svn: 353141
The fewerElementsVectors implementation for load/stores
handles the scalar reduction case just as well, so drop
the redundant code in narrowScalar. This also introduces
support for narrowing irregular size breakdowns for
scalars.
llvm-svn: 353125
Summary:
If the index isn't constant, this transform inserts a multiply and an add on the index to calculating the base pointer for a scalar load. But we still create a memory operand with an offset of 0 and the size of the scalar access. But the access is really to an unknown offset within the original access size.
This can cause the machine scheduler to incorrectly calculate dependencies between this load and other accesses. In the case we saw, there was a 32 byte vector store that was split into two 16 byte stores, one with offset 0 and one with offset 16. The size of the memory operand for both was 16. The scheduler correctly detected the alias with the offset 0 store, but not the offset 16 store.
This patch discards the pointer info so we don't incorrectly detect aliasing. I wasn't sure if we could keep using the original offset and size without risking some other transform on the load changing the size.
I tried to reduce a test case, but there's still a lot of memory operations needed to get the scheduler to do the bad reordering. So it looked pretty fragile to maintain.
Reviewers: efriedma
Reviewed By: efriedma
Subscribers: arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57616
llvm-svn: 353124
Don't handle vector conditions.
I think this can be merged in the future with
fewerElementsVectorSelect, although this becomes slightly tricky with
a vector condition.
llvm-svn: 353122
Try to use the underlying source registers.
This enables legalization in more cases where some irregular
operations are widened and others narrowed.
This seems to make the test_combines_2 AArch64 test worse, since the
MERGE_VALUES has multiple uses. Since this should be required for
legalization, a hasOneUse check is probably inappropriate (or maybe
should only be used if the merge is legal?).
llvm-svn: 353121
A number of of tests were using imm operands, not cimm. Since CSE
relies on the exact ConstantInt* pointer used, and implicit
conversions are generally evil, also enforce the bitsize of the types.
llvm-svn: 353113
Summary:
Noticed while looking at D56052.
```
// The 'control' of BEXTR has the pattern of:
// [15...8 bit][ 7...0 bit] location
// [ bit count][ shift] name
// I.e. 0b000000011'00000001 means (x >> 0b1) & 0b11
```
I.e. we do not care about any of the bits aside from the low 16 bits.
So there is no point in doing the `slh`,`or` in 64 bits,
let's just do everything in 32 bits, and anyext if needed.
We could do that in 16 even, but we intentionally don't
zext to i16 (longer encoding IIRC),
so i'm guessing the same applies here.
Reviewers: craig.topper, andreadb, RKSimon
Reviewed By: craig.topper
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D56715
llvm-svn: 353073
These instructions implicitly operate on ST0, but we don't currently add that information to the MachineInstr. We also don't add it the tablegen definitions either.
For the most part this doesn't cause any problems because the stackifying occurs after register allocation. All the instructions are marked as having side effects so the postRA scheduler won't reorder them amongst themselves.
But nothing stops inline assembly using X87 instructions from being reordered around other x87 instructions if that inline assembly wasn't marked volatile.
The two test cases I've identified so far in PR40539 involve loads and stores used to set up the inline assembly or capture the results of the inline assembly ending up in the wrong order.
This patch adds implicit ST0 uses/defs to the load/store instructions to prevent this from happening.
I plan to fix all of the FP instructions, but the binops are bit trickier to get right. So I've chosen fixing the known test cases as a good first step.
I think we also need to update the tablegen descriptions so MS inline assembly infers the right clobbers, but I haven't checked that yet.
Differential Revision: https://reviews.llvm.org/D57644
llvm-svn: 353070
This reverts commit b05ecba6d687fcb3078509220c67458bf1d77a2e.
Apparently adding floor breaks AMDGPU somehow, so I have to back this out
while I look into it.
llvm-svn: 353065
This reverts commit 8bbd570fd5205a04d88d2e5513a6e4adbd028039.
Apparently adding ffloor breaks AMDGPU somehow, so I need to back this out
while I look into it.
llvm-svn: 353064
All of these instructions consume one encoded register and the other register is %st. They either write the result to %st or the encoded register. Previously we printed both arguments when the encoded register was written. And we printed one argument when the result was written to %st. For the stack popping forms the encoded register is always the destination and we didn't print both operands. This was inconsistent with gcc and objdump and just makes the output assembly code harder to read.
This patch changes things to always print both operands making us consistent with gcc and objdump. The parser should still be able to handle the single register forms just as it did before. This also matches the GNU assembler behavior.
llvm-svn: 353061
Add an intrinsic that takes 2 unsigned integers with the scale of them
provided as the third argument and performs fixed point multiplication on
them.
This is a part of implementing fixed point arithmetic in clang where some of
the more complex operations will be implemented as intrinsics.
Differential Revision: https://reviews.llvm.org/D55625
llvm-svn: 353059
This introduces a generic opcode for floating point floor, working towards
selecting @llvm.floor.
Differential Revision: https://reviews.llvm.org/D57484
llvm-svn: 353057
For PCMPGT(0, X) patterns where we only demand the sign bit (e.g. BLENDV or MOVMSK) then we can use X directly.
Differential Revision: https://reviews.llvm.org/D57667
llvm-svn: 353051
Noticed while investigating PR40483, and fixes the basic test case from the bug - but not a more general case.
We're pretty weak at dealing with ADD/SUB combines compared to the SimplifyAssociativeOrCommutative/SimplifyUsingDistributiveLaws abilities that InstCombine can manage.
llvm-svn: 353044
This patch removes hidden codegen flag -print-schedule effectively reverting the
logic originally committed as r300311
(https://llvm.org/viewvc/llvm-project?view=revision&revision=300311).
Flag -print-schedule was originally introduced by r300311 to address PR32216
(https://bugs.llvm.org/show_bug.cgi?id=32216). That bug was about adding "Better
testing of schedule model instruction latencies/throughputs".
These days, we can use llvm-mca to test scheduling models. So there is no longer
a need for flag -print-schedule in LLVM. The main use case for PR32216 is
now addressed by llvm-mca.
Flag -print-schedule is mainly used for debugging purposes, and it is only
actually used by x86 specific tests. We already have extensive (latency and
throughput) tests under "test/tools/llvm-mca" for X86 processor models. That
means, most (if not all) existing -print-schedule tests for X86 are redundant.
When flag -print-schedule was first added to LLVM, several files had to be
modified; a few APIs gained new arguments (see for example method
MCAsmStreamer::EmitInstruction), and MCSubtargetInfo/TargetSubtargetInfo gained
a couple of getSchedInfoStr() methods.
Method getSchedInfoStr() had to originally work for both MCInst and
MachineInstr. The original implmentation of getSchedInfoStr() introduced a
subtle layering violation (reported as PR37160 and then fixed/worked-around by
r330615).
In retrospect, that new API could have been designed more optimally. We can
always query MCSchedModel to get the latency and throughput. More importantly,
the "sched-info" string should not have been generated by the subtarget.
Note, r317782 fixed an issue where "print-schedule" didn't work very well in the
presence of inline assembly. That commit is also reverted by this change.
Differential Revision: https://reviews.llvm.org/D57244
llvm-svn: 353043
This prevents Constant Hoisting from pulling the constant out of the block,
allowing us to still produce LDRH/UXTH nodes. LDRB/UXTB (255) is already cheap
by the default getIntImmCost, but I've added it for clarity.
Differential Revision: https://reviews.llvm.org/D57671
llvm-svn: 353040
We now print ST0 as 'st' when generating the clobber list for MS inline assembly in clang. This matches what the gcc reg name list expects.
Original commit message:
This fixes the test case in PR35982 by preventing MMX instructions that read MM0-7 from being moved below EMMS/FEMMS by the post RA scheduler.
Though as discussed in bugzilla, this is not a complete fix. There is still the possibility of reordering in IR or by the pre-RA scheduler.
Differential Revision: https://reviews.llvm.org/D57298
llvm-svn: 353016
