Modify the behavior of the `k` packet to kill all inferiors rather than
just the current one. The specification leaves the exact behavior
of this packet up to the implementation but since vKill is specifically
meant to be used to kill a single process, it seems logical to use `k`
to provide the alternate function of killing all of them.
Move starting stdio forwarding from the "running" response
to the packet handlers that trigger the process to start. This avoids
attempting to start it multiple times when multiple processes are killed
on Linux which implicitly causes LLGS to receive "started" events
for all of them. This is probably also more correct as the ability
to send "O" packets is implied by the continue-like command being issued
(and therefore the client waiting for responses) rather than the start
notification.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.llvm.org/D127500
Add a test verifying that plain 'D' packet correctly detaches all
processes.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.llvm.org/D127291
Fix ThreadStopInfo struct to include the signal number for all events.
Since signo was not included in the details for fork, vfork
and vforkdone stops, the code incidentally referenced the wrong union
member, resulting in wrong signo being sent.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.llvm.org/D127193
Implement the support for %Stop asynchronous notification packet format
in LLGS. This does not implement full support for non-stop mode for
threaded programs -- process plugins continue stopping all threads
on every event. However, it will be used to implement asynchronous
events in multiprocess debugging.
The non-stop protocol is enabled using QNonStop packet. When it is
enabled, the server uses notification protocol instead of regular stop
replies. Since all threads are always stopped, notifications are always
generated for all active threads and copied into stop notification
queue.
If the queue was empty, the initial asynchronous %Stop notification
is sent to the client immediately. The client needs to (eventually)
acknowledge the notification by sending the vStopped packet, in which
case it is popped from the queue and the stop reason for the next thread
is reported. This continues until notification queue is empty again,
in which case an OK reply is sent.
Asychronous notifications are also used for vAttach results and program
exits. The `?` packet uses a hybrid approach -- it returns the first
stop reason synchronously, and exposes the stop reasons for remaining
threads via vStopped queue.
The change includes a test case for a program generating a segfault
on 3 threads. The server is expected to generate a stop notification
for the segfaulting thread, along with the notifications for the other
running threads (with "no stop reason"). This verifies that the stop
reasons are correctly reported for all threads, and that notification
queue works.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.llvm.org/D125575
Refactor GDBRemoteCommunicationServerLLGS::SendStopReasonForState()
to accept process as an argument rather than hardcoding
m_current_process, in order to make it work correctly for multiprocess
scenarios.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.llvm.org/D127497
Refactor SendStopReplyPacketForThread() to accept process instance
as a parameter rather than use m_current_process. This future-proofs
it for multiprocess support.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.llvm.org/D127289
Include the process identifier in the `T` stop responses when
multiprocess extension is enabled (i.e. prepend it to the thread
identifier). Use the exposed identifier to simplify the fork-and-follow
tests.
The LLDB client accounts for the possible PID since the multiprocess
extension support was added in b601c6719226fb83c43dae62a581e5ee08bfb169.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.llvm.org/D127192
Include the process identifier in W/X stop reasons when multiprocess
extensions are enabled.
The LLDB client does not support process identifiers there at the moment
but it parses packets in such a way that their presence does not cause
any problems.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.llvm.org/D127191
Most of our code was including Log.h even though that is not where the
"lldb" log channel is defined (Log.h defines the generic logging
infrastructure). This worked because Log.h included Logging.h, even
though it should.
After the recent refactor, it became impossible the two files include
each other in this direction (the opposite inclusion is needed), so this
patch removes the workaround that was put in place and cleans up all
files to include the right thing. It also renames the file to LLDBLog to
better reflect its purpose.
This patch makes use of c++ type checking and scoped enums to make
logging statements shorter and harder to misuse.
Defines like LIBLLDB_LOG_PROCESS are replaces with LLDBLog::Process.
Because it now carries type information we do not need to worry about
matching a specific enum value with the right getter function -- the
compiler will now do that for us.
The main entry point for the logging machinery becomes the GetLog
(template) function, which will obtain the correct Log object based on
the enum type. It achieves this through another template function
(LogChannelFor<T>), which must be specialized for each type, and should
return the appropriate channel object.
This patch also removes the ability to log a message if multiple
categories are enabled simultaneously as it was unused and confusing.
This patch does not actually remove any of the existing interfaces. The
defines and log retrieval functions are left around as wrappers around
the new interfaces. They will be removed in follow-up patch.
Differential Revision: https://reviews.llvm.org/D117490
Implement the qXfer:siginfo:read that is used to read the siginfo_t
(extended signal information) for the current thread. This is currently
implemented on FreeBSD and Linux.
Differential Revision: https://reviews.llvm.org/D117113
Although I cannot find any mention of this in the specification, both
gdb and lldb agree on sending an initial + packet after establishing the
connection.
OTOH, gdbserver and lldb-server behavior is subtly different. While
lldb-server *expects* the initial ack, and drops the connection if it is
not received, gdbserver will just ignore a spurious ack at _any_ point
in the connection.
This patch changes lldb's behavior to match that of gdb. An ACK packet
is ignored at any point in the connection (except when expecting an ACK
packet, of course). This is inline with the "be strict in what you
generate, and lenient in what you accept" philosophy, and also enables
us to remove some special cases from the server code. I've extended the
same handling to NAK (-) packets, mainly because I don't see a reason to
treat them differently here.
(The background here is that we had a stub which was sending spurious
+ packets. This bug has since been fixed, but I think this change makes
sense nonetheless.)
Differential Revision: https://reviews.llvm.org/D114520
[NFC] This patch replaces master and slave with primary and secondary
respectively when referring to pseudoterminals/file descriptors.
Reviewed By: clayborg, teemperor
Differential Revision: https://reviews.llvm.org/D113687
Unify the listen and connect code inside lldb-server to use
ConnectionFileDescriptor uniformly rather than a mix of it and Acceptor.
This involves:
- adding a function to map legacy values of host:port parameter
(including legacy server URLs) into CFD-style URLs
- adding a callback to return "local socket id" (i.e. UNIX socket path
or TCP port number) between listen() and accept() calls in CFD
- adding a "unix-abstract-accept" scheme to CFD
As an additional advantage, this permits lldb-server to accept any URL
known to CFD including the new serial:// scheme. Effectively,
lldb-server can now listen on the serial port. Tests for connecting
over a pty are added to test that.
Differential Revision: https://reviews.llvm.org/D111964
Use llvm::Optional<uint16_t> instead of int for port number
in UriParser::Parse(), and use llvm::None to indicate missing port
instead of a magic value of -1.
Differential Revision: https://reviews.llvm.org/D112309
Optimize the iterator comparison logic to compare Current.data()
pointers. Use std::tie for assignments from std::pair. Replace
the custom class with a function returning iterator_range.
Differential Revision: https://reviews.llvm.org/D110535
The previous version of the patch did not update the definitions in
conditionally compiled code. This patch includes changes to ARC and
windows targets.
Original commit message was:
These were added to support some mips registers on linux, but linux mips
support has now been removed due.
They are still referenced in the freebds mips implementation, but the
completeness of that implementation is also unknown. All other
architectures just set these fields to zero, which is a cause of
significant bloat in our register info definitions.
Arm also has registers with variable sizes, but they were implemented in
a more gdb-compatible fashion and don't use this feature.
Differential Revision: https://reviews.llvm.org/D110914
This reverts commit 00e704bf080ffeeb9e334fb3ab71594f9aa50969.
This commit should should have updated
llvm/llvm-project/lldb/source/Plugins/ABI/ARC/ABISysV_arc.cpp like the other
architectures.
These were added to support some mips registers on linux, but linux mips
support has now been removed due.
They are still referenced in the freebds mips implementation, but the
completeness of that implementation is also unknown. All other
architectures just set these fields to zero, which is a cause of
significant bloat in our register info definitions.
Arm also has registers with variable sizes, but they were implemented in
a more gdb-compatible fashion and don't use this feature.
Differential Revision: https://reviews.llvm.org/D110914
Add a llvm::Split() implementation that can be used via range-for loop,
e.g.:
for (StringRef x : llvm::Split("foo,bar,baz", ','))
...
The implementation uses an additional SplittingIterator class that
uses StringRef::split() internally.
Differential Revision: https://reviews.llvm.org/D110496
Implement the simpler vRun packet and prefer it over the A packet.
Unlike the latter, it tranmits command-line arguments without redundant
indices and lengths. This also improves GDB compatibility since modern
versions of gdbserver do not implement the A packet at all.
Make qLaunchSuccess not obligatory when using vRun. It is not
implemented by gdbserver, and since vRun returns the stop reason,
we can assume it to be successful.
Differential Revision: https://reviews.llvm.org/D107931
Add a new SaveCore() process method that can be used to request a core
dump. This is currently implemented on NetBSD via the PT_DUMPCORE
ptrace(2) request, and enabled via 'savecore' extension.
Protocol-wise, a new qSaveCore packet is introduced. It accepts zero
or more semicolon-separated key:value options, invokes the core dump
and returns a key:value response. Currently the only option supported
is "path-hint", and the return value contains the "path" actually used.
The support for the feature is exposed via qSaveCore qSupported feature.
Differential Revision: https://reviews.llvm.org/D101285
The type field is a signed integer.
(https://sourceware.org/gdb/current/onlinedocs/gdb/General-Query-Packets.html)
However it's not packed in the packet in the way
you might think. For example the type -1 should be:
qMemTags:<addr>,<len>:ffffffff
Instead of:
qMemTags:<addr>,<len>:-1
This change makes lldb-server's parsing more strict
and adds more tests to check that we handle negative types
correctly in lldb and lldb-server.
We only support one tag type value at this point,
for AArch64 MTE, which is positive. So this doesn't change
any of those interactions. It just brings us in line with GDB.
Also check that the test target has MTE. Previously
we just checked that we were AArch64 with a toolchain
that supports MTE.
Finally, update the tag type check for QMemTags to use
the same conversion steps that qMemTags now does.
Using static_cast can invoke UB and though we do do a limit
check to avoid this, I think it's clearer with the new method.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D104914
This is implemented using the QMemTags packet, as specified
by GDB in:
https://sourceware.org/gdb/current/onlinedocs/gdb/General-Query-Packets.html#General-Query-Packets
(recall that qMemTags was previously added to read tags)
On receipt of a valid packet lldb-server will:
* align the given address and length to granules
(most of the time lldb will have already done this
but the specification doesn't guarantee it)
* Repeat the supplied tags as many times as needed to cover
the range. (if tags > range we just use as many as needed)
* Call ptrace POKEMTETAGS to write the tags.
The ptrace step will loop just like the tag read does,
until all tags are written or we get an error.
Meaning that if ptrace succeeds it could be a partial write.
So we call it again and if we then get an error, return an error to
lldb.
We are not going to attempt to restore tags after a partial
write followed by an error. This matches the behaviour of the
existing memory writes.
The lldb-server tests have been extended to include read and
write in the same test file. With some updated function names
since "qMemTags" vs "QMemTags" isn't very clear when they're
next to each other.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D105180
Support using the extended thread-id syntax with Hg packet to select
a subprocess. This makes it possible to start providing support for
running some of the debugger packets against another subprocesses.
Differential Revision: https://reviews.llvm.org/D100261
This adds memory tag reading using the new "qMemTags"
packet and ptrace on AArch64 Linux.
This new packet is following the one used by GDB.
(https://sourceware.org/gdb/current/onlinedocs/gdb/General-Query-Packets.html)
On AArch64 Linux we use ptrace's PEEKMTETAGS to read
tags and we assume that lldb has already checked that the
memory region actually has tagging enabled.
We do not assume that lldb has expanded the requested range
to granules and expand it again to be sure.
(although lldb will be sending aligned ranges because it happens
to need them client side anyway)
Also we don't assume untagged addresses. So for AArch64 we'll
remove the top byte before using them. (the top byte includes
MTE and other non address data)
To do the ptrace read NativeProcessLinux will ask the native
register context for a memory tag manager based on the
type in the packet. This also gives you the ptrace numbers you need.
(it's called a register context but it also has non register data,
so it saves adding another per platform sub class)
The only supported platform for this is AArch64 Linux and the only
supported tag type is MTE allocation tags. Anything else will
error.
Ptrace can return a partial result but for lldb-server we will
be treating that as an error. To succeed we need to get all the tags
we expect.
(Note that the protocol leaves room for logical tags to be
read via qMemTags but this is not going to be implemented for lldb
at this time.)
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D95601
This feature "memory-tagging+" indicates that lldb-server
supports memory tagging packets. (added in a later patch)
We check HWCAP2_MTE to decide whether to enable this
feature for Linux.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D97282
The C headers are deprecated so as requested in D102845, this is replacing them
all with their (not deprecated) C++ equivalent.
Reviewed By: shafik
Differential Revision: https://reviews.llvm.org/D103084
Remove hardcoded platform list for QPassSignals, qXfer:auxv:read
and qXfer:libraries-svr4:read and instead query the process plugin
via the GetSupportedExtensions() API.
Differential Revision: https://reviews.llvm.org/D101241
Add a NativeDelegate API to pass new processes (forks) to LLGS,
and support detaching them via the 'D' packet. A 'D' packet without
a specific PID detaches all processes, otherwise it detaches either
the specified subprocess or the main process, depending on the passed
PID.
Differential Revision: https://reviews.llvm.org/D100191
Introduce three new stop reasons for fork, vfork and vforkdone events.
This includes server support for serializing fork/vfork events into
gdb-remote protocol. The stop infos for the two base events take a pair
of PID and TID for the newly forked process.
Differential Revision: https://reviews.llvm.org/D100196
Introduce a NativeProcessProtocol API for indicating support for
protocol extensions and enabling them. LLGS calls
GetSupportedExtensions() method on the process factory to determine
which extensions are supported by the plugin. If the future is both
supported by the plugin and reported as supported by the client, LLGS
enables it and reports to the client as supported by the server.
The extension is enabled on the process instance by calling
SetEnabledExtensions() method. This is done after qSupported exchange
(if the debugger is attached to any process), as well as after launching
or attaching to a new inferior.
The patch adds 'fork' extension corresponding to 'fork-events+'
qSupported feature and 'vfork' extension for 'vfork-events+'. Both
features rely on 'multiprocess+' being supported as well.
Differential Revision: https://reviews.llvm.org/D100153
These were in the shared llgs+platform code, but they only make sense
for llgs (as they deal with how the server reports information about
debugged processes).
Introduce new m_current_process and m_continue_process variables that
keep the pointers to currently selected process. At this moment, this
is equivalent to m_debugged_process_up but it lays foundations for
the future multiprocess support.
Differential Revision: https://reviews.llvm.org/D100256
Refactor handling qSupported to use a virtual HandleFeatures() method.
The client-provided features are split into an array and passed
to the method. The method returns an array of server features that are
concatenated into the qSupported response to the server.
The base implementation of HandleFeatures()
in GDBRemoteCommunicationServerCommon now includes only flags common
to both platform server and llgs, while llgs-specific flags are inserted
in GDBRemoteCommunicationServerLLGS.
Differential Revision: https://reviews.llvm.org/D100140
This implements the interactive trace start and stop methods.
This diff ended up being much larger than I anticipated because, by doing it, I found that I had implemented in the beginning many things in a non optimal way. In any case, the code is much better now.
There's a lot of boilerplate code due to the gdb-remote protocol, but the main changes are:
- New tracing packets: jLLDBTraceStop, jLLDBTraceStart, jLLDBTraceGetBinaryData. The gdb-remote packet definitions are quite comprehensive.
- Implementation of the "process trace start|stop" and "thread trace start|stop" commands.
- Implementaiton of an API in Trace.h to interact with live traces.
- Created an IntelPTDecoder for live threads, that use the debugger's stop id as checkpoint for its internal cache.
- Added a functionality to stop the process in case "process tracing" is enabled and a new thread can't traced.
- Added tests
I have some ideas to unify the code paths for post mortem and live threads, but I'll do that in another diff.
Differential Revision: https://reviews.llvm.org/D91679
Add a minimal support for the multiprocess extension in lldb-server.
The server indicates support for it via qSupported, and accepts
thread-ids containing a PID. However, it still does not support
debugging more than one inferior, so any other PID value results
in an error.
Differential Revision: https://reviews.llvm.org/D98482
Implements the required functions on gdb-remote so the '--include-existing' flag of process attach works correctly on Linux.
Reviewed By: labath, clayborg
Differential Revision: https://reviews.llvm.org/D94672
This commit vAttachWait in lldb-server, so --waitfor can be used on
Linux
Reviewed By: labath, clayborg
Differential Revision: https://reviews.llvm.org/D93895
This patch carries forward our aim to remove offset field from qRegisterInfo
packets and XML register description. I have created a new function which
returns if offset fields are dynamic meaning client can calculate offset on
its own based on register number sequence and register size. For now this
function only returns true for NativeRegisterContextLinux_arm64 but we can
test this for other architectures and make it standard later.
As a consequence we do not send offset field from lldb-server (arm64 for now)
while other stubs dont have an offset field so it wont effect them for now.
On the client side we have replaced previous offset calculation algorithm
with a new scheme, where we sort all primary registers in increasing
order of remote regnum and then calculate offset incrementally.
This committ also includes a test to verify all of above functionality
on Arm64.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D91241
This patch adds capability to introduce a custom expedited register set
in gdb remote. Currently we send register set 0 as expedited register set
but for the case of AArch64 SVE we intend to send additional information
about SVE registers size/offset configuration which can be calculated
from vg register. Therefore we will expedited Vg register in case of
AArch64 is in SVE mode to speedup register configuration calculations.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D82853
This extends the "memory region" command to
show tagged regions on AArch64 Linux when the MTE
extension is enabled.
(lldb) memory region the_page
[0x0000fffff7ff8000-0x0000fffff7ff9000) rw-
memory tagging: enabled
This is done by adding an optional "flags" field to
the qMemoryRegion packet. The only supported flag is
"mt" but this can be extended.
This "mt" flag is read from /proc/{pid}/smaps on Linux,
other platforms will leave out the "flags" field.
Where this "mt" flag is received "memory region" will
show that it is enabled. If it is not or the target
doesn't support memory tagging, the line is not shown.
(since majority of the time tagging will not be enabled)
Testing is added for the existing /proc/{pid}/maps
parsing and the new smaps parsing.
Minidump parsing has been updated where needed,
though it only uses maps not smaps.
Target specific tests can be run with QEMU and I have
added MTE flags to the existing helper scripts.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D87442
Depends on D89283.
The goal of this packet (jTraceGetSupportedType) is to be able to query the gdb-server for the tracing technology that can work for the current debuggeer, which can make the user experience simpler but allowing the user to simply type
thread trace start
to start tracing the current thread without even telling the debugger to use "intel-pt", for example. Similarly, `thread trace start [args...]` would accept args beloging to the working trace type.
Also, if the user typed
help thread trace start
We could directly show the help information of the trace type that is supported for the target, or mention instead that no tracing is supported, if that's the case.
I added some simple tests, besides, when I ran this on my machine with intel-pt support, I got
$ process plugin packet send "jTraceSupportedType"
packet: jTraceSupportedType
response: {"description":"Intel Processor Trace","pluginName":"intel-pt"}
On a machine without intel-pt support, I got
$ process plugin packet send "jTraceSupportedType"
packet: jTraceSupportedType
response: E00;
Reviewed By: clayborg, labath
Differential Revision: https://reviews.llvm.org/D90490
