This implements constrained floating point intrinsics for FP to signed and
unsigned integers.
Quoting from D32319:
The purpose of the constrained intrinsics is to force the optimizer to
respect the restrictions that will be necessary to support things like the
STDC FENV_ACCESS ON pragma without interfering with optimizations when
these restrictions are not needed.
Reviewed by: Andrew Kaylor, Craig Topper, Hal Finkel, Cameron McInally, Roman Lebedev, Kit Barton
Approved by: Craig Topper
Differential Revision: http://reviews.llvm.org/D63782
llvm-svn: 370228
These are currently translated as normal functions calls in AArch64.
Until we have proper tail call lowering, we shouldn't translate these.
Differential Revision: https://reviews.llvm.org/D66842
llvm-svn: 370225
This reduces the number of SGPRs due to some concerns about running
out of SGPRs if you make all the SGPRs that aren't reserved available
for the calling convention.
Change-Id: Idb4ca4dc72f5b6808cb524ff7270915a8de5b4c1
llvm-svn: 370215
Neither libgcc or compiler-rt are usually used on Windows, so these
functions can't be called.
Differential revision: https://reviews.llvm.org/D66880
llvm-svn: 370204
There is no pattern matched `add hi, (MipsLo texternalsym)`. As a result,
loading an address of 32-bit symbol requires two registers and one more
additional instruction:
```
addiu $1, $zero, %lo(foo)
lui $2, %hi(foo)
addu $25, $2, $1
```
This patch adds the missed pattern and enables generation more effective
set of instructions:
```
lui $1, %hi(foo)
addiu $25, $1, %lo(foo)
```
Differential Revision: https://reviews.llvm.org/D66771
llvm-svn: 370196
This adds fp16 VMOVX patterns, using the same patterns as rL362482 with some
adjustments for MVE. It allows us to move fp16 registers without going into and
out of gprs.
VMOVX is able to move the top bits from a fp16 in a fp reg into the bottom bits
of another register, zeroing the rest. This can be used for odd MVE register
lanes. The top bits are not read by fp16 instructions, so no move is required
there if we are dealing with even lanes.
Differential revision: https://reviews.llvm.org/D66793
llvm-svn: 370184
rL369567 reverted a couple of recent changes made to ARMParallelDSP
because of a miscompilation error: PR43073.
The issue stemmed from an underlying bug that was caused by adding
muls into a reduction before it was proved that they could be executed
in parallel with another mul.
Most of the changes here are from the previously reverted commits.
The additional changes have been made area:
1) The Search function now doesn't insert any muls into the Reduction
object. That now happens once the search has successfully finished.
2) For any muls added into the reduction but that weren't paired, we
accumulate their values as an input into the smlad.
Differential Revision: https://reviews.llvm.org/D66660
llvm-svn: 370171
This change moves the actual stack pointer manipulation into the legalizer,
available to targets via lower(). The codegen is slightly different because
we're using explicit masks instead of G_PTRMASK, and using G_SUB rather than
adding a negative amount via G_GEP.
Differential Revision: https://reviews.llvm.org/D66678
llvm-svn: 370104
Copied directly from the IR version.
Most of the testcases I've added for this are somewhat problematic
because they really end up testing the yet to be implemented version
for MUL_I24/MUL_U24.
llvm-svn: 370099
I thought `llvm::sort` was stable for some reason but it's not.
Use `llvm::stable_sort` in `CodeGenTarget::getSuperRegForSubReg`.
Original patch: https://reviews.llvm.org/D66498
llvm-svn: 370084
When EXPENSIVE_CHECKS are enabled, GlobalISelEmitterSubreg.td doesn't get
stable output.
Reverting while I debug it.
See: https://reviews.llvm.org/D66498
llvm-svn: 370080
(-X) * (-Y) + Z --> X * Y + Z
This is a missing optimization that shows up as a potential regression in D66050,
so we should solve it first. We appear to be partly missing this fold in IR as well.
We do handle the simpler case already:
(-X) * (-Y) --> X * Y
And it might be beneficial to make the constraint less conservative (eg, if both
operands are cheap, but not necessarily cheaper), but that causes infinite looping
for the existing fmul transform.
Differential Revision: https://reviews.llvm.org/D66755
llvm-svn: 370071
Summary:
Adds support for emitting common local global symbols to an XCOFF object file.
Local commons are emitted into the .bss section with a storage class of
C_HIDEXT.
Patch by: daltenty
Reviewers: sfertile, hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D66097
llvm-svn: 370070
This reverts commit b3d258fc44b588f06eb35f8e4b9a6d1fc859acec.
@skatkov is reporting crash in D63972#1646303
Contacted @ZhangKang, and revert the commit on behalf of him.
llvm-svn: 370069
Fix typos. Use Hi and Lo prefixes for Or instead of LHS and RHS
to match names of surrounding variables.
Differential Revision: https://reviews.llvm.org/D66587
llvm-svn: 370062
Inserting a value into Visited has the effect of terminating a search for
predecessors if that node is seen. This is legitimate for the base address, and
acts as a slight performance optimization, but the vector-building node can be
paert of a legitimate cycle so we shouldn't stop searching there.
PR43056.
llvm-svn: 370036
Summary:
This is an alternate approach to D63396
Currently funclets reuse the same stack slots that are used in the
parent function for saving callee-saved xmm registers. If the parent
function modifies a callee-saved xmm register before an excpetion is
thrown, the catch handler will overwrite the original saved value.
This patch allocates space in funclets stack for saving callee-saved xmm
registers and uses RSP instead RBP to access memory.
Signed-off-by: Pengfei Wang <pengfei.wang@intel.com>
Reviewers: rnk, RKSimon, craig.topper, annita.zhang, LuoYuanke, andrew.w.kaylor
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66596
Signed-off-by: Pengfei Wang <pengfei.wang@intel.com>
llvm-svn: 370005
The problem these are supposed to work around can occur before the
intrinsics are lowered into the nodes. Try to directly simplify them
so they are matched before the bit assert operations can be optimized
out.
llvm-svn: 369994
The mul24 matching could interfere with SLSR and the other addressing
mode related passes. This probably is not the optimal placement, but
is an intermediate step. This should probably be moved after all the
generic IR passes, particularly LSR. Moving this after LSR seems to
help in some cases, and hurts others.
As-is in this patch, in idiv-licm, it saves 1-2 instructions inside
some of the loop bodies, but increases the number in others. Moving
this later helps these loops. In the new lsr tests in
mul24-pass-ordering, the intrinsic prevents introducing more
instructions in the loop preheader, so moving this later ends up
hurting them. This shouldn't be any worse than before the intrinsics
were introduced in r366094, and LSR should probably be smarter. I
think it's because it doesn't know the and inside the loop will be
folded away.
llvm-svn: 369991
Probably better to keep add over sub in early DAG combines.
It might make sense to push this to lowering or delay it all
the way to isel. But this was the simplest change.
llvm-svn: 369981
Summary:
Previously we skipped uses within the same BB as a def when rebuilding
SSA after SjLj transformation. For example, before transformation,
```
for.cond:
%0 = phi i32 [ %var, %for.inc ] ...
%var = ...
br label %for.inc
for.inc: ; preds = %for.cond
call i32 @setjmp(...)
br %for.cond
```
In this BB, %var should be defined in all paths from %for.inc to make %0
valid. In the input it was true; %for.inc's only predecessor was
%for.cond. But after SjLj transformation, it is possible that %for.inc
has other predecessors that are reachable without reaching %for.cond.
```
entry.split:
...
br i1 %a, label %bb.1, label %for.inc
for.cond:
%0 = phi i32 [ %var, %for.inc ] ... ; Not valid!
%var = ...
br label %for.inc
for.inc: ; preds = %for.cond, %entry.split
call i32 @setjmp(...)
...
br %for.cond
```
In this case, we can't use %var in the `phi` instruction in %for.cond,
because %var is not defined in all paths through %for.inc (If the
control flow is %entry -> %entry.split -> %for.inc -> %for.cond, %var
has not been defined until we reach the `phi`). But the previous code
excluded users within the same BB, skipping instructions within the same
BB so they are not rewritten properly. User instructions within the same
BB also should be candidates for rewriting if they are _before_ the
original definition.
Fixes PR43097.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66729
llvm-svn: 369978
Summary:
Combine a test in lower-em-sjlj-longjmp-only.ll into lower-em-sjlj.ll,
because the test command is the same and I don't see any reason it
should be a separate file. Also converted tabs into spaces and fixed
indentations in lower-em-sjlj-sret.ll. (lower-em-sjlj.ll uses a
different test command (llc), so it couldn't be combined)
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66728
llvm-svn: 369974
This teaches the importer to handle INSERT_SUBREG instructions.
We were missing patterns involving INSERT_SUBREG in AArch64. It appears in
AArch64InstrInfo.td 107 times, and 14 times in AArch64InstrFormats.td.
To meaningfully import it, the GlobalISelEmitter needs to know how to infer a
super register class for a given register class.
This patch introduces the following:
- `getSuperRegForSubReg`, a function which finds the largest register class
which supports a value type and subregister index
- `inferSuperRegisterClass`, a function which finds the appropriate super
register class for an INSERT_SUBREG'
- `inferRegClassFromPattern`, a function which allows for some trivial
lookthrough into instructions
- `getRegClassFromLeaf`, a helper function which returns the register class for
a leaf `TreePatternNode`
- Support for subregister index operands in `importExplicitUseRenderer`
It also
- Updates tests in each backend which are impacted by the change
- Adds GlobalISelEmitterSubreg.td to test that we import and skip the expected
patterns
As a result of this patch, INSERT_SUBREG patterns in X86 may use the
LOW32_ADDR_ACCESS_RBP register class instead of GR32. This is correct, since the
register class contains the same registers as GR32 (except with the addition of
RBP). So, this also teaches X86 to handle that register class. This is in line
with X86ISelLowering, which treats this as a GR class.
Differential Revision: https://reviews.llvm.org/D66498
llvm-svn: 369973
ANY_EXTEND_VECTOR_INREG isn't currently marked Legal which prevents SimplifyDemandedBits from turning SIGN/ZERO_EXTEND_VECTOR_INREG into it after op legalization. And even if we did make it Legal, combineExtInVec doesn't do shuffle combining on the VECTOR_INREG nodes until AVX1.
This patch adds a quick hack to combinePMULDQ to directly emit a vector shuffle corresponding to an ANY_EXTEND_VECTOR_INREG operation. This avoids both of those issues without creating any other regressions on our tests. The xop-ifma.ll change here also showed up when I tried to resurrect D56306 and seemed to be the only improvement that patch creates now. This is a more direct way to get the benefit.
Differential Revision: https://reviews.llvm.org/D66436
llvm-svn: 369942
This improves the combine I included in D66504 to handle constants in the upper operands of the concat. If we can constant fold them away we can pull the concat after the bin op. This helps with chains of madd reductions on X86 from loop unrolling. The loop madd reduction pattern creates pmaddwd with half the width of the add that follows it using zeroes to fill the upper bits. If we have two of these added together we can pull the zeroes through the accumulating add and then shrink it.
Differential Revision: https://reviews.llvm.org/D66680
llvm-svn: 369937
Summary:
Adds support for generating the .data section in assembly files for global variables with a non-zero initialization. The support for writing the .data section in XCOFF object files will be added in a follow-on patch. Any relocations are not included in this patch.
Reviewers: hubert.reinterpretcast, sfertile, jasonliu, daltenty, Xiangling_L
Reviewed by: hubert.reinterpretcast
Subscribers: nemanjai, hiraditya, kbarton, MaskRay, jsji, wuzish, shchenz, DiggerLin, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66154
llvm-svn: 369869
These can turn up during multiplication legalization. In principle
these should also apply to smul_lohi, but I wasn't able to figure
out how to produce those with the necessary operands.
Differential Revision: https://reviews.llvm.org/D66380
llvm-svn: 369864
Checking all the instructions will help catch LICM changes when passes
are reordered. Also switch to using gfx9 since global stores make the
relevant instructions more obvious.
llvm-svn: 369855
