This patch changes the way blocks are managed by VPlan. Previously all
blocks reachable from entry would be cleaned up when a VPlan is
destroyed. With this patch, each VPlan keeps track of blocks created for
it in a list and this list is then used to delete all blocks in the list
when the VPlan is destroyed. To do so, block creation is funneled
through helpers in directly in VPlan.
The main advantage of doing so is it simplifies CFG transformations, as
those do not have to take care of deleting any blocks, just adjusting
the CFG. This helps to simplify
https://github.com/llvm/llvm-project/pull/108378 and
https://github.com/llvm/llvm-project/pull/106748.
This also simplifies handling of 'immutable' blocks a VPlan holds
references to, which at the moment only include the scalar header block.
PR: https://github.com/llvm/llvm-project/pull/120918
Update buildPlainCFG to re-use the vector and latch VPBBs created as
part of the initial skeleton in 72937203dd3b.
This should fix the leak sanitizer failure discovered by
https://lab.llvm.org/buildbot/#/builders/52/builds/619.
Unify VPlan verifiers in verifyVPlanIsValid. This adds verification for
various properties on blocks to the verifier used for VPlans generated
by the inner loop vectorizer. It also adds def-use checks for the
verifier used in the VPlan native path.
This drops the separate flag to enable HCFG verification. Instead, all
VPlans are verified once they have been created, if assertions are
enabled.
This also removes VPWidenPHIRecipe from VPHeaderPHIRecipe; it is used to
model any phi node in the native path.
The following internal error occurred when using native vplan to
vectorize the program with the debug info generation.
Assertion `!isa<DbgInfoIntrinsic>(CI) && "DbgInfoIntrinsic should have been dropped during VPlan construction"' failed.
This patch ignored all debug instructions to fix the error when native
vplan is enabled.
HCFG builder doesn't correctly handle cases when non-outermost loop is
requested to be vectorized
[Original] Differential Revision: https://reviews.llvm.org/D150700
This patch moves creating the middle VPBBs and an initial empty
vector loop region for the top-level loop to createInitialVPlan.
This consolidates code to create the initial VPlan skeleton and enables
adding other bits outside the main region during initial VPlan
construction. In particular, D150398 will add the exit check & branch to
the middle block.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D158333
Update the logic to update the successors and predecessors of region
blocks directly. This adds special handling for header and latch blocks
in place, and removes the separate loop to fix up the region blocks.
Helps to simplify D158333.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D159136
Header phi recipes have the start value (incoming from outside the loop)
as first operand. This wasn't the case for VPWidenPHIRecipes. Instead
the start value was picked during execute() by doing extra work.
To be in line with other recipes, ensure the operand order is as
expected during construction.
This reverts the revert commit 8c2276f89887d0a27298a1bbbd2181fa54bbb509.
The updated patch re-orders the getDefiningRecipe check in getVPalue to avoid
a use-after-free.
Original commit message:
Before this patch, a VPlan contained 2 mappings for Values -> VPValue:
1) Value2VPValue and 2) VPExternalDefs.
This duplication is unnecessary and there are already cases where
external defs are added to Value2VPValue. This patch replaces all uses
of VPExternalDefs with Value2VPValue.
It clarifies the naming of getOrAddVPValue (to getOrAddExternalVPValue)
and addVPValue (to addExternalVPValue).
At the moment, this is NFC, but will enable additional simplifications
in D147783.
Depends on D147891.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D147892
Asan detects heap-use-after-free, see D147892.
This reverts commit 4fc190351e5af901b6107d162d07e1fbca90934f.
This reverts commit 668045eb77628be13e448ffbb855473ffca1cc43.
Before this patch, a VPlan contained 2 mappings for Values -> VPValue:
1) Value2VPValue and 2) VPExternalDefs.
This duplication is unnecessary and there are already cases where
external defs are added to Value2VPValue. This patch replaces all uses
of VPExternalDefs with Value2VPValue.
It clarifies the naming of getOrAddVPValue (to getOrAddExternalVPValue)
and addVPValue (to addExternalVPValue).
At the moment, this is NFC, but will enable additional simplifications
in D147783.
Depends on D147891.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D147892
This updates the GraphTraits specialization for VPBlockBase to recurse
through VPRegionBlocks.
This in turn enables using VPDominatorTree to query dominance between
any block in a plan. This should enable additional use cases, including
improvements to def-use verification and porting IR-based transforms
that rely on the dominator tree.
Specifically, this change means that for regions, the entry and exit
blocks dominate the successors of the region.
Depends on D140512 and D142162.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D140513
This patch removes CondBit and Predicate from VPBasicBlock. To do so,
the patch introduces a new branch-on-cond VPInstruction opcode to model
a branch on a condition explicitly.
This addresses a long-standing TODO/FIXME that blocks shouldn't be users
of VPValues. Those extra users can cause issues for VPValue-based
analyses that don't expect blocks. Addressing this fixme should allow us
to re-introduce 266ea446ab7476.
The generic branch opcode can also be used in follow-up patches.
Depends on D123005.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D126618
This patch updates the VPlan native path to use VPRegionBlocks for all
loops in a loop nest. Up to now, only the outermost loop used a region.
This is a step towards unifying both paths and keep things consistent
between them. It also prepares various code-gen parts for modeling the
pre-header in the inner loop vectorizer (D121624).
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D123005
The implementations of VPlanDominatorTree, VPlanLoopInfo and VPlanPredicator
are all incompatible with modeling loops in VPlans as region without
explicit back-edges.
Those pieces are not actively used and only exercised by a few gtest
unit tests. They are at the moment blocking progress towards unifying
the native and inner-loop vectorizer paths in D121624 and D123005.
I think we should not block forward progress on unused pieces of code,
so this patch removes the utilities for now. The plan is to re-introduce
them as needed in a way that is compatible with the unified VPlan scheme
used in both the inner loop vectorizer and the native path.
Reviewed By: sguggill
Differential Revision: https://reviews.llvm.org/D123017
In LLVM's common loop terminology, an exit block is a block outside a
loop with a predecessor inside the loop. An exiting block is a block
inside the loop which branches to an exit block outside the loop.
This patch updates a few places where VPlan was using ExitBlock for a
block exiting a region. Those instances have been updated to use
ExitingBlock.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D126173
This addresses an existing TODO by keeping a mapping of external IR
Value * definitions wrapped in VPValues for use in a VPlan.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D123700
This patch extends VPWidenPHIRecipe to manage pairs of incoming
(VPValue, VPBasicBlock) in the VPlan native path. This is made possible
because we now directly manage defined VPValues for recipes.
By keeping both the incoming value and block in the recipe directly,
code-generation in the VPlan native path becomes independent of the
predecessor ordering when fixing up non-induction phis, which currently
can cause crashes in the VPlan native path.
This fixes PR45958.
Reviewed By: sguggill
Differential Revision: https://reviews.llvm.org/D96773
VP blocks keep track of a condition, which is a VPValue. This patch
updates VPBlockBase to manage the value using VPUser, so
replaceAllUsesWith properly updates the condition bit as well.
This is required to enable VP2VP transformations and it helps with
simplifying some of the code required to manage condition bits.
Reviewed By: gilr
Differential Revision: https://reviews.llvm.org/D95382
GCC correctly moans that PlainCFGBuilder::isExternalDef(llvm::Value*) and
StackSafetyDataFlowAnalysis::verifyFixedPoint() are defined but not used
in Release builds. Hide them behind 'ifndef NDEBUG'.
llvm-svn: 355205
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
by `getTerminator()` calls instead be declared as `Instruction`.
This is the biggest remaining chunk of the usage of `getTerminator()`
that insists on the narrow type and so is an easy batch of updates.
Several files saw more extensive updates where this would cascade to
requiring API updates within the file to use `Instruction` instead of
`TerminatorInst`. All of these were trivial in nature (pervasively using
`Instruction` instead just worked).
llvm-svn: 344502
The patch introduces loop analysis (VPLoopInfo/VPLoop) for VPBlockBases.
This analysis will be necessary to perform some H-CFG transformations and
detect and introduce regions representing a loop in the H-CFG.
Reviewers: fhahn, rengolin, mkuper, hfinkel, mssimpso
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D48816
llvm-svn: 338346
The patch introduces dominator analysis for VPBlockBases and extend
VPlan's GraphTraits specialization with the required interfaces. Dominator
analysis will be necessary to perform some H-CFG transformations and
to introduce VPLoopInfo (LoopInfo analysis on top of the VPlan representation).
Reviewers: fhahn, rengolin, mkuper, hfinkel, mssimpso
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D48815
llvm-svn: 338310
This patch introduces a VPValue in VPBlockBase to represent the condition
bit that is used as successor selector when a block has multiple successors.
This information wasn't necessary until now, when we are about to introduce
outer loop vectorization support in VPlan code gen.
Reviewers: fhahn, rengolin, mkuper, hfinkel, mssimpso
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D48814
llvm-svn: 336554
Summary:
It's internal to the VPlanHCFGBuilder and should not be visible outside of its
translation unit.
Reviewers: dcaballe, fhahn
Reviewed By: fhahn
Subscribers: rengolin, bollu, tschuett, llvm-commits, rkruppe
Differential Revision: https://reviews.llvm.org/D47312
llvm-svn: 333187
Now that the LLVM_DEBUG() macro landed on the various sub-projects
the DEBUG macro can be removed.
Also change the new uses of DEBUG to LLVM_DEBUG.
Differential Revision: https://reviews.llvm.org/D46952
llvm-svn: 333091
r332654 was reverted due to an unused function warning in
release build. This commit includes the same code with the
warning silenced.
Differential Revision: https://reviews.llvm.org/D44338
llvm-svn: 332860
The introduced problem is:
llvm.src/lib/Transforms/Vectorize/VPlanVerifier.cpp:29:13: error: unused function 'hasDuplicates' [-Werror,-Wunused-function]
static bool hasDuplicates(const SmallVectorImpl<VPBlockBase *> &VPBlockVec) {
^
llvm-svn: 332747
Patch #3 from VPlan Outer Loop Vectorization Patch Series #1
(RFC: http://lists.llvm.org/pipermail/llvm-dev/2017-December/119523.html).
Expected to be NFC for the current inner loop vectorization path. It
introduces the basic algorithm to build the VPlan plain CFG (single-level
CFG, no hierarchical CFG (H-CFG), yet) in the VPlan-native vectorization
path using VPInstructions. It includes:
- VPlanHCFGBuilder: Main class to build the VPlan H-CFG (plain CFG without nested regions, for now).
- VPlanVerifier: Main class with utilities to check the consistency of a H-CFG.
- VPlanBlockUtils: Main class with utilities to manipulate VPBlockBases in VPlan.
Reviewers: rengolin, fhahn, mkuper, mssimpso, a.elovikov, hfinkel, aprantl.
Differential Revision: https://reviews.llvm.org/D44338
llvm-svn: 332654
