Includes dpp instructions and vop1/vop2 promoted to vop3
Patch 17/N for upstreaming of AMDGPU gfx11 architecture
Depends on D126483
Reviewed By: rampitec, #amdgpu
Differential Revision: https://reviews.llvm.org/D126917
gfx11 adds the ability to use dpp modifiers on vop3 instructions.
This patch adds machine code layer support for that. The MCCodeEmitter
is changed to use APInt instead of uint64_t to support these wider
instructions.
Patch 16/N for upstreaming of AMDGPU gfx11 architecture
Depends on D126475
Reviewed By: rampitec, #amdgpu
Differential Revision: https://reviews.llvm.org/D126483
MC layer support for instructions in the MIMG encoding(Image
instructions).
Contributors:
Carl Ritson <carl.ritson@amd.com>
Patch 13/N for upstreaming of AMDGPU gfx11 architecture.
Depends on D125992
Reviewed By: rampitec, #amdgpu
Differential Revision: https://reviews.llvm.org/D126463
MCSymbolizer::tryAddingSymbolicOperand() overloaded the Size parameter
to specify either the instruction size or the operand size depending on
the architecture. However, for proper symbolic disassembly on X86, we
need to know both sizes, as an instruction can have two operands, and
the instruction size cannot be reliably calculated based on the operand
offset and its size. Hence, split Size into OpSize and InstSize.
For X86, the new interface allows to fix a couple of issues:
* Correctly adjust the value of PC-relative operands.
* Set operand size to zero when the operand is specified implicitly.
Differential Revision: https://reviews.llvm.org/D126101
A new instruction encoding. Some of these instructions were previously VOP3
encoded.
Contributors:
Carl Ritson <carl.ritson@amd.com>
Patch 11/N for upstreaming of AMDGPU gfx11 architecture.
Depends on D125824
Reviewed By: critson
Differential Revision: https://reviews.llvm.org/D125989
MC layer support for SOP(scalar alu operations) including encoding
support for s_delay_alu and s_sendmsg_rtn.
Contributors:
Jay Foad <jay.foad@amd.com>
Patch 7/N for upstreaming of AMDGPU gfx11 architecture.
Depends on D125319
Reviewed By: #amdgpu, arsenm
Differential Revision: https://reviews.llvm.org/D125498
Includes MachineCode layer support and tests, and MIR tests not requiring
CodeGen pass changes.
Includes a small change in SMInstructions.td to correct encoded bits.
Contributors:
Petar Avramovic <Petar.Avramovic@amd.com>
Dmitry Preobrazhensky <dmitry.preobrazhensky@amd.com>
Depends on D125316
Patch 6/N for upstreaming of AMDGPU gfx11 architecture.
Reviewed By: dp, Petar.Avramovic
Differential Revision: https://reviews.llvm.org/D125319
The name `MCFixedLenDisassembler.h` is out of date after D120958.
Rename it as `MCDecoderOps.h` to reflect the change.
Reviewed By: myhsu
Differential Revision: https://reviews.llvm.org/D124987
Refactor to pass a templatized size parameter to the decoder to allow wider than
64bit decodes in a later patch.
Contributors:
Jay Foad <jay.foad@amd.com>
Depends on D125261
Patch 5/N for upstreaming of AMDGPU gfx11 architecture.
Reviewed By: dp
Differential Revision: https://reviews.llvm.org/D125316
All LLVM backends use MCDisassembler as a base class for their
instruction decoders. Use "const MCDisassembler *" for the decoder
instead of "const void *". Remove unnecessary static casts.
Reviewed By: skan
Differential Revision: https://reviews.llvm.org/D122245
There's a few relevant forward declarations in there that may require downstream
adding explicit includes:
llvm/MC/MCContext.h no longer includes llvm/BinaryFormat/ELF.h, llvm/MC/MCSubtargetInfo.h, llvm/MC/MCTargetOptions.h
llvm/MC/MCObjectStreamer.h no longer include llvm/MC/MCAssembler.h
llvm/MC/MCAssembler.h no longer includes llvm/MC/MCFixup.h, llvm/MC/MCFragment.h
Counting preprocessed lines required to rebuild llvm-project on my setup:
before: 1052436830
after: 1049293745
Which is significant and backs up the change in addition to the usual benefits of
decreasing coupling between headers and compilation units.
Discourse thread: https://discourse.llvm.org/t/include-what-you-use-include-cleanup
Differential Revision: https://reviews.llvm.org/D119244
These instructions should allow src0 to be a literal with the same
value as the mandatory other literal. Enable it by introducing an
operand that defers adding its value to the MI when decoding till
the mandatory literal is parsed.
Reviewed By: dp, foad
Differential Revision: https://reviews.llvm.org/D111067
Change-Id: I22b0ae0d35bad17b6f976808e48bffe9a6af70b7
This moves the registry higher in the LLVM library dependency stack.
Every client of the target registry needs to link against MC anyway to
actually use the target, so we might as well move this out of Support.
This allows us to ensure that Support doesn't have includes from MC/*.
Differential Revision: https://reviews.llvm.org/D111454
Suffix opcodes with _gfx10.
Remove direct references to architecture specific opcodes.
Add a BVH flag and apply this to diassembly.
Fix a number of disassembly errors on gfx90a target caused by
previous incorrect BVH detection code.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D108117
Allow MIMG instructions to be selected with 6/7 VGPRs for vaddr.
Previously these were rounded up to VReg_256 this saves VGPRs.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D103800
Avoid having to round up to v8f32/VReg_256 when only 5 VGPRs are
required for a MIMG address operand.
Maintain _V8 instruction variants of pseudo instructions allowing
assembly prior to GFX10 to work as-is. Currently the validator
can tell for GFX10 what the correct size is, so will disallow
oversize address registers.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D103672
A16 support for image instructions assembly/disassembly (gfx10) was missing
Also refactor MIMG op addr size calcs to common function
We'd got 3 places where the same operation was being done.
One test is now marked XFAIL until a related codegen patch is in place
Differential Revision: https://reviews.llvm.org/D102231
Change-Id: I7e86e730ef8c71901457855cba570581f4f576bb
1. Add an accessor function to MCSymbolizer to retrieve addresses
referenced by a symbolizable operand, but not resolved to a symbol.
That way, the caller can synthesize labels at those addresses and
then retry disassembling the section.
2. Implement that in AMDGPU -- a failed symbol lookup results in the
address being added to a vector returned by the new function.
3. Use that in llvm-objdump when using MCSymbolizer (which only happens
on AMDGPU) and SymbolizeOperands is on.
Differential Revision: https://reviews.llvm.org/D101145
Change-Id: I19087c3bbfece64bad5a56ee88bcc9110d83989e
Gives reasoning for convertDPP8.
Also corrects typo in Operand type comment.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D100665
Change-Id: I33ff269db8072d83e5e0ecdbfb731d6000fc26c4
Replace individual operands GLC, SLC, and DLC with a single cache_policy
bitmask operand. This will reduce the number of operands in MIR and I hope
the amount of code. These operands are mostly 0 anyway.
Additional advantage that parser will accept these flags in any order unlike
now.
Differential Revision: https://reviews.llvm.org/D96469
With tfe on there can be a vgpr write to vdata+1.
Add tablegen support for 5 register vdata store.
This is required for 4 register vdata store with tfe.
Differential Revision: https://reviews.llvm.org/D94960
Rename the *_gfx9_gfx10 ttmp registers to *_gfx9plus for simplicity,
and use the corresponding isGFX9Plus predicate to decide when to use
them instead of the old *_vi versions.
Differential Revision: https://reviews.llvm.org/D94975
- Clarify documentation on initializing scratch.
- Rename compute_pgm_rsrc2 field for enabling scratch from
ENABLE_SGPR_PRIVATE_SEGMENT_WAVEFRONT_OFFSET to
ENABLE_PRIVATE_SEGMENT to match hardware definition.
Differential Revision: https://reviews.llvm.org/D93271
It's more future-proof to use isGFX10Plus from the start, on the
assumption that future architectures will be based on current
architectures.
Also make use of the existing isGFX9Plus in a few places.
Differential Revision: https://reviews.llvm.org/D92092
This change adds a real glc operand to the return atomic
instead of just string " glc" in the middle of the asm
string.
Improves asm parser diagnostics.
Differential Revision: https://reviews.llvm.org/D90730
This instruction was introduced in GFX10.3, reusing the opcode of
v_mac_legacy_f32 from GFX10.1.
Differential Revision: https://reviews.llvm.org/D89247
Note that all subtargets up to GFX10.1 have v_mad_legacy_f32, but GFX8/9
lack v_mac_legacy_f32. GFX10.3 has no mad/mac f32 instructions at all.
Differential Revision: https://reviews.llvm.org/D88890
Add 96-bit, 160-bit and 256-bit AReg classes to match VReg and SReg.
NFC as far as I know, but it may avoid weird legalization problems.
Differential Revision: https://reviews.llvm.org/D78348
