The existing function already used the MainLoop class, which allows one
to wait on multiple events at once. It needed to do this in order to
wait for v4 and v6 connections simultaneously. However, since it was
creating its own instance of MainLoop, this meant that it was impossible
to multiplex these sockets with anything else.
This patch simply adds a version of this function which uses an
externally provided main loop instance, which allows the caller to add
any events it deems necessary. The previous function becomes a very thin
wrapper over the new one.
ReadProcessMemory will not perform the read if part of the memory is
unreadable (and even though the API has a `number_of_bytes_read`
argument). To make this work, I explicitly inspect the memory region
being read and only read the accessible part.
Previously, we were returning an error if we couldn't read the whole
region. This doesn't matter most of the time, because lldb caches memory
reads, and in that process it aligns them to cache line boundaries. As
(LLDB) cache lines are smaller than pages, the reads are unlikely to
cross page boundaries.
Nonetheless, this can cause a problem for large reads (which bypass the
cache), where we're unable to read anything even if just a single byte
of the memory is unreadable. This patch fixes the lldb-server to do
that, and also changes the linux implementation, to reuse any partial
results it got from the process_vm_readv call (to avoid having to
re-read everything again using ptrace, only to find that it stopped at
the same place).
This matches debugserver behavior. It is also consistent with the gdb
remote protocol documentation, but -- notably -- not with actual
gdbserver behavior (which returns errors instead of partial results). We
filed a
[clarification
bug](https://sourceware.org/bugzilla/show_bug.cgi?id=24751) several
years ago. Though we did not really reach a conclusion there, I think
this is the most logical behavior.
The associated test does not currently pass on windows, because the
windows memory read APIs don't support partial reads (I have a WIP patch
to work around that).
This patch extends TypeQuery matching to support anonymous namespaces. A
new flag is added to control the behavior. In the "strict" mode, the
query must match the type exactly -- all anonymous namespaces included.
The dynamic type resolver in the itanium abi (the motivating use case
for this) uses this flag, as it queries using the name from the
demangles, which includes anonymous namespaces.
This ensures we don't confuse a type with a same-named type in an
anonymous namespace. However, this does *not* ensure we don't confuse
two types in anonymous namespacs (in different CUs). To resolve this, we
would need to use a completely different lookup algorithm, which
probably also requires a DWARF extension.
In the "lax" mode (the default), the anonymous namespaces in the query
are optional, and this allows one search for the type using the usual
language rules (`::A` matches `::(anonymous namespace)::A`).
This patch also changes the type context computation algorithm in
DWARFDIE, so that it includes anonymous namespace information. This
causes a slight change in behavior: the algorithm previously stopped
computing the context after encountering an anonymous namespace, which
caused the outer namespaces to be ignored. This meant that a type like
`NS::(anonymous namespace)::A` would be (incorrectly) recognized as
`::A`). This can cause code depending on the old behavior to misbehave.
The fix is to specify all the enclosing namespaces in the query, or use
a non-exact match.
This patch updates the source cache dump command to print both the
actual (on-disk) checksum and the expected (line table) checksum. To
achieve that we now read and store the on-disk checksum in the cached
object. The same information will be used in a future path to print a
warning when the checksums differ.
There is no need to support Python 2.7 anymore, Python 3.3+ has
`subprocess.DEVNULL`. This is good practice and also prevents file
handles from
staying open unnecessarily.
Also remove a couple unused or unneeded `__future__` imports.
My build of LLDB is all the time loading targets with a version of
libc++ that was built with gcc that uses the DW_FORM 0x1e that is not
implemented by LLVM, and I doubt it'll ever implement it. It's used for
some 128 bit encoding of numbers, which is just very weird. Because of
this, LLDB is showing some warnings all the time for my users, so I'm
adding a flag to control the enablement of this warning.
[D156118](https://reviews.llvm.org/D156118) states that this note is
always present, but it is better to check it explicitly, as otherwise
`lldb` may crash when trying to read registers.
armv7a and armv8a are common names for the application subarch for arm.
These names in particular are used in ChromeOS, Android, and a few other
known applications. In ChromeOS, we encountered a bug where armv7a arch
was not recognised and segfaulted when starting an executable on an
arm32 device.
Google Issue Tracker:
https://issuetracker.google.com/361414339
This patch addresses a bug where `cs`/`fs` and other segmentation flags
were being identified as having a type of `32b` and `64b` for `rflags`.
In that case the register value was returning the fail value `0xF...`
and this was corrupting some minidumps. Here we just read it as a 64b
value and truncate it.
In addition to that fix, I added comparing the registers from the live
process to the loaded core for the generic minidump test. Prior only
being ARM register tests. This explains why this was not detected
before.
This PR fixes another race condition in
https://github.com/llvm/llvm-project/pull/90930. The failure was found
by @labath with this log: https://paste.debian.net/hidden/30235a5c/:
```
dotest_wrapper. < 15> send packet: $z0,224505,1#65
...
b-remote.async> < 22> send packet: $vCont;s:p1dcf.1dcf#4c
intern-state GDBRemoteClientBase::Lock::Lock sent packet: \x03
b-remote.async> < 818> read packet: $T13thread:p1dcf.1dcf;name:a.out;threads:1dcf,1dd2;jstopinfo:5b7b226e616d65223a22612e6f7574222c22726561736f6e223a227369676e616c222c227369676e616c223a31392c22746964223a373633317d2c7b226e616d65223a22612e6f7574222c22746964223a373633347d5d;thread-pcs:0000000000224505,00007f4e4302119a;00:0000000000000000;01:0000000000000000;02:0100000000000000;03:0000000000000000;04:9084997dfc7f0000;05:a8742a0000000000;06:b084997dfc7f0000;07:6084997dfc7f0000;08:0000000000000000;09:00d7e5424e7f0000;0a:d0d9e5424e7f0000;0b:0202000000000000;0c:80cc290000000000;0d:d8cc1c434e7f0000;0e:2886997dfc7f0000;0f:0100000000000000;10:0545220000000000;11:0602000000000000;12:3300000000000000;13:0000000000000000;14:0000000000000000;15:2b00000000000000;16:80fbe5424e7f0000;17:0000000000000000;18:0000000000000000;19:0000000000000000;reason:signal;#b9
```
It shows an async interrupt "\x03" was sent immediately after `vCont;s`
single step over breakpoint at address `0x224505` (which was disabled
before vCont). And the later stop was still at the original PC
(0x224505) not moving forward.
The investigation shows the failure happens when timeout is short and
async interrupt is sent to lldb-server immediately after vCont so
ptrace() resumes and then async interrupts debuggee immediately so
debuggee does not get a chance to execute and move PC. So it enters stop
mode immediately at original PC. `ThreadPlanStepOverBreakpoint` does not
expect PC not moving and reports stop at the original place.
To fix this, the PR prevents `ThreadPlanSingleThreadTimeout` from being
created during `ThreadPlanStepOverBreakpoint` by introduces a new
`SupportsResumeOthers()` method and `ThreadPlanStepOverBreakpoint`
returns false for it. This makes sense because we should never resume
threads during step over breakpoint anyway otherwise it might cause
other threads to miss breakpoint.
---------
Co-authored-by: jeffreytan81 <jeffreytan@fb.com>
At least for our Windows on Arm machine compiling with clang-cl,
it has inverted which variables get a `::` prefix.
Would not surprise me if msvc does the opposite so feel free to
revert if these tests fail for you.
This is an oversight from https://github.com/llvm/llvm-project/pull/104817 where the intention
was to hoist the ExternalASTSourceWrapper construction out of the
conditional so it can be set on both the `SemaSourceWithPriorities` and
be added as an external source to Sema. But the inner
`ExternalASTSourceWrapper` allocation wasn't actually removed.
This currently all works fine because all these AST sources are
refcounted and point to the same underlying AST sources. But this
patch cleans this up regardless.
For supported architectures, lldb will do a static scan of the assembly
instructions of a function to detect stack/frame pointer changes,
register stores and loads, so we can retrieve register values for the
caller stack frames. We trust that the function address range reflects
the actual function range, but in a stripped binary or other unusual
environment, we can end up scanning all of the text as a single
"function" which is (1) incorrect and useless, but more importantly (2)
slow.
Cap the max size we will profile to 10MB of instructions. There will
surely be functions longer than this with no unwind info, and we will
miss the final epilogue or mid-function epilogues past the first 10MB,
but I think this will be unusual, and the failure more to missing the
epilogue is that the user will need to step out an extra time or two as
the StackID is not correctly calculated mid-epilogue. I think this is a
good tradeoff of behaviors.
rdar://134391577
This patch removes all of the Set.* methods from Status.
This cleanup is part of a series of patches that make it harder use the
anti-pattern of keeping a long-lives Status object around and updating
it while dropping any errors it contains on the floor.
This patch is largely NFC, the more interesting next steps this enables
is to:
1. remove Status.Clear()
2. assert that Status::operator=() never overwrites an error
3. remove Status::operator=()
Note that step (2) will bring 90% of the benefits for users, and step
(3) will dramatically clean up the error handling code in various
places. In the end my goal is to convert all APIs that are of the form
` ResultTy DoFoo(Status& error)
`
to
` llvm::Expected<ResultTy> DoFoo()
`
How to read this patch?
The interesting changes are in Status.h and Status.cpp, all other
changes are mostly
` perl -pi -e 's/\.SetErrorString/ = Status::FromErrorString/g' $(git
grep -l SetErrorString lldb/source)
`
plus the occasional manual cleanup.
With this commit, we also hide the implementation details of
`std::invoke`. To do so, the `LibCXXFrameRecognizer` got a couple more
regular expressions.
The regular expression passed into `AddRecognizer` became problematic,
as it was evaluated on the demangled name. Those names also included
result types for C++ symbols. For `std::__invoke` the return type is a
huge `decltype(...)`, making the regular expresison really hard to
write.
Instead, I added support to `AddRecognizer` for matching on the
demangled names without result type and argument types.
By hiding the implementation details of `invoke`, also the back traces
for `std::function` become even nicer, because `std::function` is using
`__invoke` internally.
Co-authored-by: Adrian Prantl <aprantl@apple.com>
This patch adds the option to specify specific memory ranges to be
included in a given core file. The current implementation lets user
specified ranges either be in addition to a certain save style, or
independent of them via the newly added custom enum.
To achieve being inclusive of save style, I've moved from a std::vector
of ranges to a RangeDataVector, and to join overlapping ranges to
prevent duplication of memory ranges in the core file.
As a non function bonus, when SBSavecore was initially created, the
header was included in the lldb-private interfaces, and I've fixed that
and moved it the forward declare as an oversight. CC @bulbazord in case
we need to include that into swift.
