Expanding on D109750.
Since `DBG_VALUE` instructions have final register validity determined in
`LDVImpl::handleDebugValue`, there is no apparent reason to immediately prune
unused register operands as their defs are erased. Consequently, this renders
`MachineInstr::eraseFromParentAndMarkDBGValuesForRemoval` moot; gaining a
substantial performance improvement.
The only necessary changes involve making relevant passes consider invalid
DBG_VALUE vregs uses as valid.
Reviewed By: MatzeB
Differential Revision: https://reviews.llvm.org/D112852
Code using indirect calls is broken without this, and there isn't
really much value in supporting the old attempt to vary the argument
placement based on uses. This resulted in more argument shuffling code
anyway.
Also have the option stop implying all inputs need to be passed. This
will no rely on the amdgpu-no-* attributes to avoid passing
unnecessary values.
Previously we would require adding an attribute to kernels to enable
the inputs passed in the kernarg segment, accessed by
llvm.amdgcn.implicitarg.ptr. This violates the principle of being
correct by default. Some OpenMP testcases were broken recently since
it wasn't correctly setting this attribute, and no known frontends are
setting this to anything other than the maximum.
Most of the test changes are from load widening of argument loads
since there now more implied dereferenceable bytes.
The ray_origin, ray_dir and ray_inv_dir arguments should all be vec3 to
match how the hardware instruction works.
Don't change the API of the corresponding OpenCL builtins.
Differential Revision: https://reviews.llvm.org/D115032
Two-address pass works right before RA and if an immediate
was folded into an instruction there is nothing to remove
the dead def. We end up with something like:
v_mov_b32_e32 v14, 0xc1700000
v_mov_b32_e32 v14, 0x41200000
v_fmaak_f32 v51, s67, v19, 0xc1700000
v_fmaak_f32 v38, v51, v19, 0x4120000
The patch kills the dead move instruction right in the folding.
Differential Revision: https://reviews.llvm.org/D114999
Add clamp combine. Source is fminnum(fmaxnum(Val, 0.0), 1.0) or
fmaxnum(fminnum(Val, 1.0), 0.0) or fmed3 intrinsic with 0.0 and
1.0 as two out of three operands.
Differential Revision: https://reviews.llvm.org/D90052
Add floating point version of med3 combine.
Source is fminnum(fmaxnum(Val, K0), K1) or fmaxnum(fminnum(Val, K1), K0)
where K0 and K1 are constants and K0 <= K1.
Differential Revision: https://reviews.llvm.org/D90051
Recognize constant splat padded with undef in isCanonicalized.
Fcanonicalize will be removed by RemoveFcanonicalize in post-legalizer
combiner. We will treat undef as value that will result in a splat
in clamp combine after regbankselect.
Differential Revision: https://reviews.llvm.org/D104408
Do not infer no-amdgpu-implicitarg-ptr for sanitized functions. If a
function is explicitly marked amdgpu-no-implicitarg-ptr and
sanitize_address, infer that it is required.
bvh should be handled separately from vmem and vmem with sampler instructions
for waitcnt handling.
Differential Revision: https://reviews.llvm.org/D114794
In-order bvh instructions don't require a waitcnt as order is
guaranteed.
However, waitcnt IS required for other image instruction types vs
bvh.
Pre-commit test for new functionality in https://reviews.llvm.org/D114794
Differential Revision: https://reviews.llvm.org/D114792
Using a BufferSize of one for memory ProcResources will result in better
ILP since it more accurately models the dependencies between memory ops
and their consumers on an in-order processor. After this change, the
scheduler will treat the data edges from loads as blocking so that
stalls are guaranteed when waiting for data to be retreaved from memory.
Since we don't actually track waitcnt here, this should do a better job
at modeling their behavior.
Practically, this means that the scheduler will trigger the 'STALL'
heuristic more often.
This type of change needs to be evaluated experimentally. Preliminary
results are positive.
Fixes: SWDEV-282962
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D114777
Detected on targets older then gfx10 (e.g. gfx9) for constants that are
too large to be inlined (constant are sgpr by default).
In med3 combine it is expected that regbankselect maps all operands of
min/max we try to match to vgpr. However constants are mapped to sgpr
and there will be a sgpr-to-vgpr copy. Matchers look through sgpr-to-vgpr
copies and return sgpr and these break constant bus restriction.
Build med3 with all vgpr operands. Use existing sgpr-to-vgpr copies for
matched sgprs. If there is no such copy (not expected) build one.
Differential Revision: https://reviews.llvm.org/D114700
This change exposes isBuildVectorConstantSplat() to the llvm namespace
and uses it to implement the constant splat versions of
m_SpecificICst().
CombinerHelper::matchOrShiftToFunnelShift() can now work with vector
types and CombinerHelper::matchMulOBy2()'s match for a constant splat is
simplified.
Differential Revision: https://reviews.llvm.org/D114625
Greedy register allocator prefers to move a constrained
live range into a larger allocatable class over spilling
them. This patch defines the necessary superclasses for
vector registers. For subtargets that support copy between
VGPRs and AGPRs, the vector register spills during regalloc
now become just copies.
Reviewed By: rampitec, arsenm
Differential Revision: https://reviews.llvm.org/D109301
Attempt to further document the intended cache policies requested
by different combinations of GLC, SLC and DLC bits.
GFX10 non-temporal stores are updated to set GLC.
Reviewed By: t-tye
Differential Revision: https://reviews.llvm.org/D114351
This change folds a basic funnel shift idiom:
- (or (shl x, amt), (lshr y, sub(bw, amt))) -> fshl(x, y, amt)
- (or (shl x, sub(bw, amt)), (lshr y, amt)) -> fshr(x, y, amt)
This also helps in folding to rotate shift if x and y are equal since we
already have a funnel shift to rotate combine.
Differential Revision: https://reviews.llvm.org/D114499
The combined vector register classes with both
VGPRs and AGPRs are currently unallocatable.
This patch turns them into allocatable as a
prerequisite to enable copy between VGPR and
AGPR registers during regalloc.
Also, added the missing AV register classes from
192b to 1024b.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D109300
Select SelectionDAG ops smul_lohi/umul_lohi to
v_mad_i64_i32/v_mad_u64_u32 respectively, with an addend of 0.
v_mul_lo, v_mul_hi and v_mad_i64/u64 are all quarter-rate instructions
so it is better to use one instruction than two.
Further improvements are possible to make better use of the addend
operand, but this is already a strict improvement over what we have
now.
Differential Revision: https://reviews.llvm.org/D113986
Change VOP_PAT_GEN to default to not generating an instruction selection
pattern for the VOP2 (e32) form of an instruction, only for the VOP3
(e64) form. This allows SIFoldOperands maximum freedom to fold copies
into the operands of an instruction, before SIShrinkInstructions tries
to shrink it back to the smaller encoding.
This affects the following VOP2 instructions:
v_min_i32
v_max_i32
v_min_u32
v_max_u32
v_and_b32
v_or_b32
v_xor_b32
v_lshr_b32
v_ashr_i32
v_lshl_b32
A further cleanup could simplify or remove VOP_PAT_GEN, since its
optional second argument is never used.
Differential Revision: https://reviews.llvm.org/D114252
Implicit derivatives are only valid in pixel shaders,
hence only implicitly enable WQM for pixel shaders.
This avoids unintended WQM in other shader types (e.g. compute)
when image sampling instructions are used.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D114414
The existing constrained shift PatFrags only dealt with masked shift
from OpenCL front-ends. This change copies the
X86DAGToDAGISel::isUnneededShiftMask() function to AMDGPU and uses it in
the shift PatFrag predicates.
Differential Revision: https://reviews.llvm.org/D113448
AMDGPU is unusual in that the both stack is indexed in the same
direction as stack growth (up). We therefore always need the emergency
stack slots placed as low as possible to ensure they are in range of
load/store instruction immediate offsets. The existing logic is mostly
OK, but failed if we required stack realignment.
I don't understand what the existing control isFPCloseToIncomingSP is
supposed to mean, but can only be used to stop placing the scavenge
slots earlier. Make this explicit so that targets can opt-in rather
than opt-out only.
Detailed description: We currently have a set of patterns to select ISD::FNEG and ISD::FABS to the bitwise operations. We need to make them predicated to select the VALU or SALU bitwise operation variant according to the SDNode divergence bit.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D114257
The compiler was generating symbols in the final code object for local
branch target labels. This bloats the code object, slows down the loader,
and is only used to simplify disassembly.
Use '--symbolize-operands' with llvm-objdump to improve readability of the
branch target operands in disassembly.
Fixes: SWDEV-312223
Reviewed By: scott.linder
Differential Revision: https://reviews.llvm.org/D114273
NFCI. Previously the implicit use was added to V_MOV_B32_indirect_read
when building the instruction. V_MOV_B32_indirect_write didn't have an
implicit use of M0 at all, but apparently it did not cause any problems.
Differential Revision: https://reviews.llvm.org/D114239
Introduce V_MOV_B32_indirect_read for indexed vgpr reads
(and rename the old V_MOV_B32_indirect to
V_MOV_B32_indirect_write) so they can be unambiguously
distinguished from regular V_MOV_B32_e32. Previously they
were distinguished by looking for extra implicit operands
but this is fragile because regular moves sometimes have
extra implicit operands too:
- either by accident, when instructions end up with
duplicate implicit operands (see e.g. D100939)
- or by design, when SIInstrInfo::copyPhysReg breaks a
multi-dword copy into individual subreg mov instructions
and adds implicit operands for the super-register.
The effect of this is that SIInstrInfo::isFoldableCopy can
be simplified and identifies more foldable copies. The test
diffs show that more immediate 0 values have been folded as
inline operands.
SIInstrInfo::isReallyTriviallyReMaterializable could
probably be simplified too but that is not part of this
patch.
Differential Revision: https://reviews.llvm.org/D114230
Recently we started generate DBG_VALUEs with $noreg operands.
This crashes SIPostRABundler, and it should not iterate these
registers anyway.
Fixes: SWDEV-311733
Differential Revision: https://reviews.llvm.org/D114202
If possible fold fneg into instruction above if users cannot fold mods and we
know it will decrease instruction count.
Follows same logic as SDAG combiner in choosing opportunities to combine.
Differential Revision: https://reviews.llvm.org/D112827
