compiler identification lines in test-cases.
(Doing so only because it's then easier to search for references which
are actually important and need fixing.)
llvm-svn: 351200
Summary:
This allows moving the condition from the intrinsic to the standard ICmp
opcode, so that LLVM can do simplifications on it. The icmp.i1 intrinsic
is an identity for retrieving the SGPR mask.
And we can also get the mask from and i1, or i1, xor i1.
Reviewers: arsenm, nhaehnle
Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D52060
llvm-svn: 351150
official Git repository.
Remove the directions for using git-svn, and demote the prominence of
the svn instructions.
Also, fix a few other issues while I'm in there:
* Mention LLVM_ENABLE_PROJECTS more.
* Getting started doesn't need to mention test-suite, but should
mention clang and the other projects.
* Remove mentions of "configure", since that's long gone.
I've also adjusted a few other mentions of svn to point to github, but
have not done so comprehensively.
Differential Revision: https://reviews.llvm.org/D56654
llvm-svn: 351130
TFE and LWE support requires extra result registers that are written in the
event of a failure in order to detect that failure case.
The specific use-case that initiated these changes is sparse texture support.
This means that if image intrinsics are used with either option turned on, the
programmer must ensure that the return type can contain all of the expected
results. This can result in redundant registers since the vector size must be a
power-of-2.
This change takes roughly 6 parts:
1. Modify the instruction defs in tablegen to add new instruction variants that
can accomodate the extra return values.
2. Updates to lowerImage in SIISelLowering.cpp to accomodate setting TFE or LWE
(where the bulk of the work for these instruction types is now done)
3. Extra verification code to catch cases where intrinsics have been used but
insufficient return registers are used.
4. Modification to the adjustWritemask optimisation to account for TFE/LWE being
enabled (requires extra registers to be maintained for error return value).
5. An extra pass to zero initialize the error value return - this is because if
the error does not occur, the register is not written and thus must be zeroed
before use. Also added a new (on by default) option to ensure ALL return values
are zero-initialized that is required for sparse texture support.
6. Disable the inst_combine optimization in the presence of tfe/lwe (later TODO
for this to re-enable and handle correctly).
There's an additional fix now to avoid a dmask=0
For an image intrinsic with tfe where all result channels except tfe
were unused, I was getting an image instruction with dmask=0 and only a
single vgpr result for tfe. That is incorrect because the hardware
assumes there is at least one vgpr result, plus the one for tfe.
Fixed by forcing dmask to 1, which gives the desired two vgpr result
with tfe in the second one.
The TFE or LWE result is returned from the intrinsics using an aggregate
type. Look in the test code provided to see how this works, but in essence IR
code to invoke the intrinsic looks as follows:
%v = call {<4 x float>,i32} @llvm.amdgcn.image.load.1d.v4f32i32.i32(i32 15,
i32 %s, <8 x i32> %rsrc, i32 1, i32 0)
%v.vec = extractvalue {<4 x float>, i32} %v, 0
%v.err = extractvalue {<4 x float>, i32} %v, 1
This re-submit of the change also includes a slight modification in
SIISelLowering.cpp to work-around a compiler bug for the powerpc_le
platform that caused a buildbot failure on a previous submission.
Differential revision: https://reviews.llvm.org/D48826
Change-Id: If222bc03642e76cf98059a6bef5d5bffeda38dda
Work around for ppcle compiler bug
Change-Id: Ie284cf24b2271215be1b9dc95b485fd15000e32b
llvm-svn: 351054
This fixes https://bugs.llvm.org/show_bug.cgi?id=40110.
This implements handling of undef operands for integer intrinsics in
ConstantFolding, in particular for the bitcounting intrinsics (ctpop,
cttz, ctlz), the with.overflow intrinsics, the saturating math
intrinsics and the funnel shift intrinsics.
The undef behavior follows what InstSimplify does for the general cas
e of non-constant operands. For the bitcount intrinsics (where
InstSimplify doesn't do undef handling -- there cannot be a combination
of an undef + non-constant operand) I'm using a 0 result if the intrinsic
is defined for zero and undef otherwise.
Differential Revision: https://reviews.llvm.org/D55950
llvm-svn: 350971
Summary:
Records in the module summary index whether the bitcode was compiled
with the option necessary to enable splitting the LTO unit
(e.g. -fsanitize=cfi, -fwhole-program-vtables, or -fsplit-lto-unit).
The information is passed down to the ModuleSummaryIndex builder via a
new module flag "EnableSplitLTOUnit", which is propagated onto a flag
on the summary index.
This is then used during the LTO link to check whether all linked
summaries were built with the same value of this flag. If not, an error
is issued when we detect a situation requiring whole program visibility
of the class hierarchy. This is the case when both of the following
conditions are met:
1) We are performing LowerTypeTests or Whole Program Devirtualization.
2) There are type tests or type checked loads in the code.
Note I have also changed the ThinLTOBitcodeWriter to also gate the
module splitting on the value of this flag.
Reviewers: pcc
Subscribers: ormris, mehdi_amini, Prazek, inglorion, eraman, steven_wu, dexonsmith, arphaman, dang, llvm-commits
Differential Revision: https://reviews.llvm.org/D53890
llvm-svn: 350948
MergeFunc only deletes unused duplicate functions if they have local
linkage, but it should be safe to relax this to any "discardable if
unused" linkage type.
Differential Revision: https://reviews.llvm.org/D56574
llvm-svn: 350939
Currently when a select has a constant value in one branch and the select feeds
a conditional branch (via a compare/ phi and compare) we unfold the select
statement. This results in threading the conditional branch later on. Similar
opportunity exists when a select (with a constant in one branch) feeds a
switch (via a phi node). The patch unfolds select under this condition.
A testcase is provided.
llvm-svn: 350931
Summary:
Step 2 in using MemorySSA in LICM:
Use MemorySSA in LICM to do sinking and hoisting, all under "EnableMSSALoopDependency" flag.
Promotion is disabled.
Enable flag in LICM sink/hoist tests to test correctness of this change. Moved one test which
relied on promotion, in order to test all sinking tests.
Reviewers: sanjoy, davide, gberry, george.burgess.iv
Subscribers: llvm-commits, Prazek
Differential Revision: https://reviews.llvm.org/D40375
llvm-svn: 350879
The C standard says "The memchr function locates the first
occurrence of c (converted to an unsigned char)[...]". The expansion
was missing the conversion to unsigned char.
Fixes https://bugs.llvm.org/show_bug.cgi?id=39041 .
Differential Revision: https://reviews.llvm.org/D55947
llvm-svn: 350775
This is matching the equivalent of the DAG expansion,
so it should never end up with worse perf than the
original code even if the target doesn't have a rotate
instruction.
llvm-svn: 350672
Summary:
This fixes the IDom for exit blocks and all blocks reachable from the exit blocks, when runtime unrolling under multiexit/exiting case.
We initially had a restrictive check that the IDom is only updated when
it is the header of the loop.
However, we also need to update the IDom to the correct one when the
IDom is any block within the original loop. See added test cases (which
fail dom tree verification without the patch).
Reviewers: reames, mzolotukhin, mkazantsev, hfinkel
Reviewed by: brzycki, kuhar
Subscribers: zzheng, dmgreen, llvm-commits
Differential Revision: https://reviews.llvm.org/D56284
llvm-svn: 350640
Change part of the tests to use vectors (I'm using scalar for ugt
and vector for ult), add multiuse variations, rename %lz to %tz
for the cttz tests.
llvm-svn: 350471
The cttz/ctlz intrinsics have a parameter specifying whether the
result is undefined for zero. cttz(x, false) can be relaxed to
cttz(x, true) if x is known non-zero, and in fact such an optimization
is already performed. However, this currently doesn't work if x is
non-zero as a result of a select rather than an explicit branch.
This patch adds handling for this case, thus allowing
x != 0 ? cttz(x, false) : y to simplify to x != 0 ? cttz(x, true) : y.
Differential Revision: https://reviews.llvm.org/D55786
llvm-svn: 350463
In addition to finding dead uses of instructions, also find dead uses
of function arguments, and replace them with zero as well.
I'm changing the way the known bits are computed here to remove the
coupling between the transfer function and the algorithm. It previously
relied on the first op being visited first and computing known bits --
unless the first op is not an instruction, in which case they're computed
on the second op. I could have adjusted this to check for "instruction
or argument", but I think it's better to avoid the repeated calculation
with an explicit flag.
Differential Revision: https://reviews.llvm.org/D56247
llvm-svn: 350435
At -O0, globalopt is not run during the compile step, and we can have a
chain of an alias having an immediate aliasee of another alias. The
summaries are constructed assuming aliases in a canonical form
(flattened chains), and as a result only the base object but no
intermediate aliases were preserved.
Fix by adding a pass that canonicalize aliases, which ensures each
alias is a direct alias of the base object.
Reviewers: pcc, davidxl
Subscribers: mehdi_amini, inglorion, eraman, steven_wu, dexonsmith, arphaman, llvm-commits
Differential Revision: https://reviews.llvm.org/D54507
llvm-svn: 350423
Lifetime markers which reference inputs to the extraction region are not
safe to extract. Example ('rhs' will be extracted):
```
entry:
+------------+
| x = alloca |
| y = alloca |
+------------+
/ \
lhs: rhs:
+-------------------+ +-------------------+
| lifetime_start(x) | | lifetime_start(x) |
| use(x) | | lifetime_start(y) |
| lifetime_end(x) | | use(x, y) |
| lifetime_start(y) | | lifetime_end(y) |
| use(y) | | lifetime_end(x) |
| lifetime_end(y) | +-------------------+
+-------------------+
```
Prior to extraction, the stack coloring pass sees that the slots for 'x'
and 'y' are in-use at the same time. After extraction, the coloring pass
infers that 'x' and 'y' are *not* in-use concurrently, because markers
from 'rhs' are no longer available to help decide otherwise.
This leads to a miscompile, because the stack slots actually are in-use
concurrently in the extracted function.
Fix this by moving lifetime start/end markers for memory regions defined
in the calling function around the call to the extracted function.
Fixes llvm.org/PR39671 (rdar://45939472).
Differential Revision: https://reviews.llvm.org/D55967
llvm-svn: 350420
Similar to rL350199 - there are no known analysis/codegen holes for
funnel shift intrinsics now, so we can canonicalize the 6+ regular
instructions to funnel shift to improve vectorization, inlining,
unrolling, etc.
llvm-svn: 350419
In some cases the order that we hoist instructions in means that when rehoisting
(which uses the same order as hoisting) we can rehoist to a block A, then a
block B, then block A again. This currently causes an assertion failure as it
expects that when changing the hoist point it only ever moves to a block that
dominates the hoist point being moved from.
Fix this by moving the re-hoist point when it doesn't dominate the dominator of
hoisted instruction, or in other words when it wouldn't dominate the uses of
the instruction being rehoisted.
Differential Revision: https://reviews.llvm.org/D55266
llvm-svn: 350408
OptimizeAutoreleaseRVCall skips optimizing llvm.objc.autoreleaseReturnValue if it
sees a user which is llvm.objc.retainAutoreleasedReturnValue, and if they have
equivalent arguments (either identical or equivalent PHIs). It then assumes that
ObjCARCOpt::OptimizeRetainRVCall will optimize the pair instead.
Trouble is, ObjCARCOpt::OptimizeRetainRVCall doesn't know about equivalent PHIs
so optimizes in a different way and we are left with an unoptimized llvm.objc.autoreleaseReturnValue.
This teaches ObjCARCOpt::OptimizeRetainRVCall to also understand PHI equivalence.
rdar://problem/47005143
Reviewed By: ahatanak
Differential Revision: https://reviews.llvm.org/D56235
llvm-svn: 350284
The caller to EraseInstruction had this conditional:
// ARC calls with null are no-ops. Delete them.
if (IsNullOrUndef(Arg))
but the assert inside EraseInstruction only allowed ConstantPointerNull and not
undef or bitcasts.
This adds support for both of these cases.
rdar://problem/47003805
llvm-svn: 350261
If an instruction has no demanded bits, remove it directly during BDCE,
instead of leaving it for something else to clean up.
Differential Revision: https://reviews.llvm.org/D56185
llvm-svn: 350257
The final piece of IR-level analysis to allow this was committed with:
rL350188
Using the intrinsics should improve transforms based on cost models
like vectorization and inlining.
The backend should be prepared too, so we can now canonicalize more
sequences of shift/logic to the intrinsics and know that the end
result should be equal or better to the original code even if the
target does not have an actual rotate instruction.
llvm-svn: 350199
To make it more obvious which part of the transformation is carried
out by BDCE. Also drop the CHECK-IO lines which only run -instsimplify
as they don't really seem meaningful if the main check doesn't run
-instsimplify either.
llvm-svn: 350189
This (mostly) fixes https://bugs.llvm.org/show_bug.cgi?id=39771.
BDCE currently detects instructions that don't have any demanded bits
and replaces their uses with zero. However, if an instruction has
multiple uses, then some of the uses may be dead (have no demanded bits)
even though the instruction itself is still live. This patch extends
DemandedBits/BDCE to detect such uses and replace them with zero.
While this will not immediately render any instructions dead, it may
lead to simplifications (in the motivating case, by converting a rotate
into a simple shift), break dependencies, etc.
The implementation tries to strike a balance between analysis power and
complexity/memory usage. Originally I wanted to track demanded bits on
a per-use level, but ultimately we're only really interested in whether
a use is entirely dead or not. I'm using an extra set to track which uses
are dead. However, as initially all uses are dead, I'm not storing uses
those user is also dead. This case is checked separately instead.
The previous attempt to land this lead to miscompiles, because cases
where uses were initially dead but were later found to be live during
further analysis were not always correctly removed from the DeadUses
set. This is fixed now and the added test case demanstrates such an
instance.
Differential Revision: https://reviews.llvm.org/D55563
llvm-svn: 350188
Summary:
Existing LIR recognizes CTLZ where shifting input variable right until it is zero. (Shift-Until-Zero idiom)
This commit:
1. Augments Shift-Until-Zero idiom to recognize CTTZ where input variable is shifted left.
2. Prepare for BitScan idiom recognition.
Patch by Yuanfang Chen (tabloid.adroit)
Reviewers: craig.topper, evstupac
Reviewed By: craig.topper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D55876
llvm-svn: 350074
This patch teaches LoopSimplifyCFG to remove dead exiting edges
from loops.
Differential Revision: https://reviews.llvm.org/D54025
Reviewed By: fedor.sergeev
llvm-svn: 350049
