This patch is rearranging code a bit to add WatchpointResources to
Process. A WatchpointResource is meant to represent a hardware
watchpoint register in the inferior process. It has an address, a size,
a type, and a list of Watchpoints that are using this
WatchpointResource.
This current patch doesn't add any of the features of
WatchpointResources that make them interesting -- a user asking to watch
a 24 byte object could watch this with three 8 byte WatchpointResources.
Or a Watchpoint on 1 byte at 0x1002 and a second watchpoint on 1 byte at
0x1003, these must both be served by a single WatchpointResource on that
doubleword at 0x1000 on a 64-bit target, if two hardware watchpoint
registers were used to track these separately, one of them may not be
hit. Or if you have one Watchpoint on a variable with a condition set,
and another Watchpoint on that same variable with a command defined or
different condition, or ignorecount, both of those Watchpoints need to
evaluate their criteria/commands when their WatchpointResource has been
hit.
There's a bit of code movement to rearrange things in the direction I'll
need for implementing this feature, so I want to start with reviewing &
landing this mostly NFC patch and we can focus on the algorithmic
choices about how WatchpointResources are shared and handled as they're
triggeed, separately.
This patch also stops printing "Watchpoint <n> hit: old value: <x>, new
vlaue: <y>" for Read watchpoints. I could make an argument for print
"Watchpoint <n> hit: current value <x>" but the current output doesn't
make any sense, and the user can print the value if they are
particularly interested. Read watchpoints are used primarily to
understand what code is reading a variable.
This patch adds more fallbacks for how to print the objects being
watched if we have types, instead of assuming they are all integral
values, so a struct will print its elements. As large watchpoints are
added, we'll be doing a lot more of those.
To track the WatchpointSP in the WatchpointResources, I changed the
internal API which took a WatchpointSP and devolved it to a Watchpoint*,
which meant touching several different Process files. I removed the
watchpoint code in ProcessKDP which only reported that watchpoints
aren't supported, the base class does that already.
I haven't yet changed how we receive a watchpoint to identify the
WatchpointResource responsible for the trigger, and identify all
Watchpoints that are using this Resource to evaluate their conditions
etc. This is the same work that a BreakpointSite needs to do when it has
been tiggered, where multiple Breakpoints may be at the same address.
There is not yet any printing of the Resources that a Watchpoint is
implemented in terms of ("watchpoint list", or
SBWatchpoint::GetDescription).
"watchpoint set var" and "watchpoint set expression" take a size
argument which was previously 1, 2, 4, or 8 (an enum). I've changed this
to an unsigned int. Most hardware implementations can only watch 1, 2,
4, 8 byte ranges, but with Resources we'll allow a user to ask for
different sized watchpoints and set them in hardware-expressble terms
soon.
I've annotated areas where I know there is work still needed with
LWP_TODO that I'll be working on once this is landed.
I've tested this on aarch64 macOS, aarch64 Linux, and Intel macOS.
https://discourse.llvm.org/t/rfc-large-watchpoint-support-in-lldb/72116
The Watchpoint and Breakpoint objects try to track the hardware index
that was used for them, if they are hardware wp/bp's. The majority of
our debugging goes over the gdb remote serial protocol, and when we set
the watchpoint/breakpoint, there is no (standard) way for the remote
stub to communicate to lldb which hardware index was used. We have an
lldb-extension packet to query the total number of watchpoint registers.
When a watchpoint is hit, there is an lldb extension to the stop reply
packet (documented in lldb-gdb-remote.txt) to describe the watchpoint
including its actual hardware index,
<addr within wp range> <wp hw index> <actual accessed address>
(the third field is specifically needed for MIPS). At this point, if the
stub reported these three fields (the stub is only required to provide
the first), we can know the actual hardware index for this watchpoint.
Breakpoints are worse; there's never any way for us to be notified about
which hardware index was used. Breakpoints got this as a side effect of
inherting from StoppointSite with Watchpoints.
We expose the watchpoint hardware index through "watchpoint list -v" and
through SBWatchpoint::GetHardwareIndex.
With my large watchpoint support, there is no *single* hardware index
that may be used for a watchpoint, it may need multiple resources. Also
I don't see what a user is supposed to do with this information, or an
IDE. Knowing the total number of watchpoint registers on the target, and
knowing how many Watchpoint Resources are currently in use, is helpful.
Knowing how many Watchpoint Resources
a single user-specified watchpoint needed to be implemented is useful.
But knowing which registers were used is an implementation detail and
not available until we hit the watchpoint when using gdb remote serial
protocol.
So given all that, I'm removing watchpoint hardware index numbers. I'm
changing the SB API to always return -1.
This removes AArch64 specific code from the GDB* classes.
To do this I've added 2 new methods to Architecture:
* RegisterWriteCausesReconfigure to check if what you are about to do
will trash the register info.
* ReconfigureRegisterInfo to do the reconfiguring. This tells you if
anything changed so that we only invalidate registers when needed.
So that ProcessGDBRemote can call ReconfigureRegisterInfo in
SetThreadStopInfo,
I've added forwarding calls to GDBRemoteRegisterContext and the base
class
RegisterContext.
(which removes a slightly sketchy static cast as well)
RegisterContext defaults to doing nothing for both the methods
so anything other than GDBRemoteRegisterContext will do nothing.
This completes the conversion of LocateSymbolFile into a SymbolLocator
plugin. The only remaining function is DownloadSymbolFileAsync which
doesn't really fit into the plugin model, and therefore moves into the
SymbolLocator class, while still relying on the plugins to do the
underlying work.
This removes explicit invalidation of vg and svg that was done in
`GDBRemoteRegisterContext::AArch64Reconfigure`. This was in fact
covering up a bug elsehwere.
Register information says that a write to vg also invalidates svg (it
does not unless you are in streaming mode, but we decided to keep it
simple and say it always does).
This invalidation was not being applied until *after* AArch64Reconfigure
was called. This meant that without those manual invalidates this
happened:
* vg is written
* svg is not invalidated
* Reconfigure uses the written vg value
* Reconfigure uses the *old* svg value
I have moved the AArch64Reconfigure call to after we've processed the
invalidations caused by the register write, so we no longer need the
manual invalidates in AArch64Reconfigure.
In addition I have changed the order in which expedited registers as
parsed. These registers come with a stop notification and include,
amongst others, vg and svg.
So now we:
* Parse them and update register values (including vg and svg)
* AArch64Reconfigure, which uses those values, and invalidates every
register, because offsets may have changed.
* Parse the expedited registers again, knowing that none of the values
will have changed due to the scaling.
This means we use the expedited registers during the reconfigure, but
the invalidate does not mean we throw all of them away.
The cost is we parse them twice client side, but this is cheap compared
to a network packet, and is limited to AArch64 targets only.
On a system with SVE and SME, these are the packets sent for a step:
```
(lldb) b-remote.async> < 803> read packet:
$T05thread:p1f80.1f80;name:main.o;threads:1f80;thread-pcs:000000000040056c<...>a1:0800000000000000;d9:0400000000000000;reason:trace;#fc
intern-state < 21> send packet: $xfffffffff200,200#5e
intern-state < 516> read packet:
$e4f2ffffffff000000<...>#71
intern-state < 15> send packet: $Z0,400568,4#4d
intern-state < 6> read packet: $OK#9a
dbg.evt-handler < 16> send packet: $jThreadsInfo#c1
dbg.evt-handler < 224> read packet:
$[{"name":"main.o","reason":"trace","registers":{"161":"0800000000000000",<...>}],"signal":5,"tid":8064}]]#73
```
You can see there are no extra register reads which means we're using
the expedited registers.
For a write to vg:
```
(lldb) register write vg 4
lldb < 37> send packet:
$Pa1=0400000000000000;thread:1f80;#4a
lldb < 6> read packet: $OK#9a
lldb < 20> send packet: $pa1;thread:1f80;#29
lldb < 20> read packet: $0400000000000000#04
lldb < 20> send packet: $pd9;thread:1f80;#34
lldb < 20> read packet: $0400000000000000#04
```
There is the initial P write, and lldb correctly assumes that SVG is
invalidated by this also so we read back the new vg and svg values
afterwards.
On an SVE/SME the register context configuration may change after the
inferior process has executed. This was handled via
https://reviews.llvm.org/D159504 but it is reconfiguring and clearing
the register context after we've parsed any expedited reigster values
from the stop reply packet. That results in lldb having to read each
register value one at a time while at that stop location, which will be
a performance problem on non-local debug setups.
The configuration & clearing needs to happen first. Also, update the
names of the local variables for a little clarity.
[lldb] Part 2 of 2 - Refactor `CommandObject::DoExecute(...)` to return
`void` instead of ~~`bool`~~
Justifications:
- The code doesn't ultimately apply the `true`/`false` return values.
- The methods already pass around a `CommandReturnObject`, typically
with a `result` parameter.
- Each command return object already contains:
- A more precise status
- The error code(s) that apply to that status
Part 1 refactors the `CommandObject::Execute(...)` method.
- See
[https://github.com/llvm/llvm-project/pull/69989](https://github.com/llvm/llvm-project/pull/69989)
rdar://117378957
This reverts commit a7b78cac9a77e3ef6bbbd8ab1a559891dc693401.
With updates to the tests.
TestWatchTaggedAddress.py: Updated the expected watchpoint types,
though I'm not sure there should be a differnt default for the two
ways of setting them, that needs to be confirmed.
TestStepOverWatchpoint.py: Skipped this everywhere because I think
what used to happen is you couldn't put 2 watchpoints on the same
address (after alignment). I guess that this is now allowed because
modify watchpoints aren't accounted for, but likely should be.
Needs investigating.
This reverts commit 933ad5c897ee366759a54869b35b2d7285a92137.
This caused 1 test failure and an unexpected pass on AArch64 Linux:
https://lab.llvm.org/buildbot/#/builders/96/builds/45765
Wasn't reported because the bot was already red at the time.
Watchpoints in lldb can be either 'read', 'write', or 'read/write'. This
is exposing the actual behavior of hardware watchpoints. gdb has a
different behavior: a "write" type watchpoint only stops when the
watched memory region *changes*.
A user is using a watchpoint for one of three reasons:
1. Want to find what is changing/corrupting this memory.
2. Want to find what is writing to this memory.
3. Want to find what is reading from this memory.
I believe (1) is the most common use case for watchpoints, and it
currently can't be done in lldb -- the user needs to continue every time
the same value is written to the watched-memory manually. I think gdb's
behavior is the correct one. There are some use cases where a developer
wants to find every function that writes/reads to/from a memory region,
regardless of value, I want to still allow that functionality.
This is also a bit of groundwork for my large watchpoint support
proposal
https://discourse.llvm.org/t/rfc-large-watchpoint-support-in-lldb/72116
where I will be adding support for AArch64 MASK watchpoints which watch
power-of-2 memory regions. A user might ask to watch 24 bytes, and a
MASK watchpoint stub can do this with a 32-byte MASK watchpoint if it is
properly aligned. And we need to ignore writes to the final 8 bytes of
that watched region, and not show those hits to the user.
This patch adds a new 'modify' watchpoint type and it is the default.
Re-landing this patch after addressing testsuite failures found in CI on
Linux, Intel machines, and windows.
rdar://108234227
The size of ZA depends on the streaming vector length regardless
of the active mode. So in addition to vg (which reports the active
mode) we must send the client svg.
Otherwise the mechanics are the same as for non-streaming SVE.
Use the svg value to update the defined size of ZA, accounting
for the fact that ZA is not a single vector but a suqare matrix.
So if svg is 8, a single streaming vector would be 8*8 = 64 bytes.
ZA is that squared, so 64*64 = 4096 bytes.
Testing is included in a later patch.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D159504
Watchpoints in lldb can be either 'read', 'write', or 'read/write'. This
is exposing the actual behavior of hardware watchpoints. gdb has a
different behavior: a "write" type watchpoint only stops when the
watched memory region *changes*.
A user is using a watchpoint for one of three reasons:
1. Want to find what is changing/corrupting this memory.
2. Want to find what is writing to this memory.
3. Want to find what is reading from this memory.
I believe (1) is the most common use case for watchpoints, and it
currently can't be done in lldb -- the user needs to continue every time
the same value is written to the watched-memory manually. I think gdb's
behavior is the correct one. There are some use cases where a developer
wants to find every function that writes/reads to/from a memory region,
regardless of value, I want to still allow that functionality.
This is also a bit of groundwork for my large watchpoint support
proposal
https://discourse.llvm.org/t/rfc-large-watchpoint-support-in-lldb/72116
where I will be adding support for AArch64 MASK watchpoints which watch
power-of-2 memory regions. A user might ask to watch 24 bytes, and a
MASK watchpoint stub can do this with a 32-byte MASK watchpoint if it is
properly aligned. And we need to ignore writes to the final 8 bytes of
that watched region, and not show those hits to the user.
This patch adds a new 'modify' watchpoint type and it is the default.
rdar://108234227
The remaining use of ConstString in StructuredData is the Dictionary
class. Internally it's backed by a `std::map<ConstString, ObjectSP>`.
I propose that we replace it with a `llvm::StringMap<ObjectSP>`.
Many StructuredData::Dictionary objects are ephemeral and only exist for
a short amount of time. Many of these Dictionaries are only produced
once and are never used again. That leaves us with a lot of string data
in the ConstString StringPool that is sitting there never to be used
again. Even if the same string is used many times for keys of different
Dictionary objects, that is something we can measure and adjust for
instead of assuming that every key may be reused at some point in the
future.
Quick comparisons of key data is likely not a concern with Dictionary,
but the use of `llvm::StringMap` means that lookups should be fast with
its hashing strategy.
Switching to a llvm::StringMap meant that the iteration order may be
different. To account for this when serializing/dumping the dictionary,
I added some code to sort the output by key before emitting anything.
Differential Revision: https://reviews.llvm.org/D159313
ConstString can be implicitly converted into a llvm::StringRef. This is
very useful in many places, but it also hides places where we are
creating a ConstString only to use it as a StringRef for the entire
lifespan of the ConstString object.
I locally removed the implicit conversion and found some of the places we
were doing this.
Differential Revision: https://reviews.llvm.org/D159237
I'm rewriting this for 2 reasons:
1) Although a 1024 char buffer is probably enough space, the error
string may grow beyond that and we could lose some information. Using
StringStream (as we do in the rest of ProcessGDBRemote) seems like a
sensible solution.
2) I am planning on changing `UnixSignals::GetSignalAsCString`,
rewriting things with `llvm::formatv` will make that process easier.
Differential Revision: https://reviews.llvm.org/D158017
Add support for the `low_mem_addressing_bits` and
`high_mem_addressing_bits` keys in the stop reply packet,
in addition to the existing `addressing_bits`. Same
behavior as in the qHostInfo packet.
Clean up AddressableBits so we don't need to check if
any values have been set in the object before using it
to potentially update the Process address masks.
Differential Revision: https://reviews.llvm.org/D158041
On AArch64 systems, we may have different page table setups for
low memory and high memory, and therefore a different number of
bits used for addressing depending on which half of memory the
address is in.
This patch extends the qHostInfo and LC_NOTE "addrable bits" so
that it can specify the number of addressing bits in high memory
and in low memory separately. It builds on the patch I added in
https://reviews.llvm.org/D151292 where Process tracks the separate
address masks, and there is a user setting to set them manually.
Differential Revision: https://reviews.llvm.org/D157667
rdar://113225907
StreamFile subclasses Stream (from lldbUtility) and is backed by a File
(from lldbHost). It does not depend on anything from lldbCore or any of its
sibling libraries, so I think it makes sense for this to live in
lldbHost instead.
Differential Revision: https://reviews.llvm.org/D157460
DynamicLoader::LoadBinaryWithUUIDAndAddress can create a Module based
on the binary image in memory, which in some cases contains symbol
names and can be genuinely useful. If we don't have a filename, it
creates a name in the form `memory-image-0x...` with the header address.
In practice, this is most useful with Darwin userland corefiles
where the binary was stored in the corefile in whole, and we can't
find a binary with the matching UUID. Using the binary out of
the corefile memory in this case works well.
But in other cases, akin to firmware debugging, we merely end up
with an oddly named binary image and no symbols.
Add a flag to control whether we will create these memory images
and add them to the Target or not; only set it to true when working
with a userland Mach-O image with the "all image infos" LC_NOTE for
a userland corefile.
Differential Revision: https://reviews.llvm.org/D157167
I need to call this to figure out why the assert in
StopInfoMachException::CreateStopReasonWithMachException is triggering, but
it isn't appropriate to directly access the GDBRemoteCommunication there. And
dumping whatever history the process plugin has collected during the run isn't
gdb-remote specific...
Differential Revision: https://reviews.llvm.org/D154992
Fix incorrect uses of LLDB_LOG_ERROR. The macro doesn't automatically
inject the error in the log message: it merely passes the error as the
first argument to formatv and therefore must be referenced with {0}.
Thanks to Nicholas Allegra for collecting a list of places where the
macro was misused.
rdar://111581655
Differential revision: https://reviews.llvm.org/D154530
In ProcessMachCore::LoadBinariesViaMetadata(), if we did
load some binaries via metadata in the core file, don't
then search for a userland dyld in the corefile / kernel
and throw away that binary list. Also fix a little bug
with correctly recognizing corefiles using a `main bin spec`
LC_NOTE that explicitly declare that this is a userland
corefile.
LocateSymbolFileMacOSX.cpp's Symbols::DownloadObjectAndSymbolFile
clarify the comments on how the force_lookup and how the
dbgshell_command local both have the same effect.
In PlatformDarwinKernel::LoadPlatformBinaryAndSetup, don't
log a message unless we actually found a kernel fileset.
Reorganize ObjectFileMachO::LoadCoreFileImages so that it delegates
binary searching to DynamicLoader::LoadBinaryWithUUIDAndAddress and
doesn't duplicate those searches. For searches that fail, we would
perform them multiple times in both methods. When we have the
mach-o segment vmaddrs for a binary, don't let LoadBinaryWithUUIDAndAddress
load the binary first at its mach-o header address in the Target;
we'll load the segments at the correct addresses individually later
in this method.
DynamicLoaderDarwin::ImageInfo::PutToLog fix a LLDB_LOG logging
formatter.
In DynamicLoader::LoadBinaryWithUUIDAndAddress, instead of using
Target::GetOrCreateModule as a way to find a binary already registered
in lldb's global module cache (and implicitly add it to the Target
image list), use ModuleList::GetSharedModule() which only searches
the global module cache, don't add it to the Target. We may not
want to add an unstripped binary to the Target.
Add a call to Symbols::DownloadObjectAndSymbolFile() even if
"force_symbol_search" isn't set -- this will turn into a
DebugSymbols call / Spotlight search on a macOS system, which
we want.
Only set the Module's LoadAddress if the caller asked us to do that.
Differential Revision: https://reviews.llvm.org/D150928
rdar://109186357
This patch refactors the `StructuredData::Integer` class to make it
templated, makes it private and adds 2 public specialization for both
`int64_t` & `uint64_t` with a public type aliases, respectively
`SignedInteger` & `UnsignedInteger`.
It adds new getter for signed and unsigned interger values to the
`StructuredData::Object` base class and changes the implementation of
`StructuredData::Array::GetItemAtIndexAsInteger` and
`StructuredData::Dictionary::GetValueForKeyAsInteger` to support signed
and unsigned integers.
This patch also adds 2 new `Get{Signed,Unsigned}IntegerValue` to the
`SBStructuredData` class and marks `GetIntegerValue` as deprecated.
Finally, this patch audits all the caller of `StructuredData::Integer`
or `StructuredData::GetIntegerValue` to use the proper type as well the
various tests that uses `SBStructuredData.GetIntegerValue`.
rdar://105575764
Differential Revision: https://reviews.llvm.org/D150485
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
Use templates to simplify {Get,Set}PropertyAtIndex. It has always
bothered me how cumbersome those calls are when adding new properties.
After this patch, SetPropertyAtIndex infers the type from its arguments
and GetPropertyAtIndex required a single template argument for the
return value. As an added benefit, this enables us to remove a bunch of
wrappers from UserSettingsController and OptionValueProperties.
Differential revision: https://reviews.llvm.org/D149774
If a remote stub provides the addressing_bits kv pair in
the stop reply packet, update the Process address masks with
that value as it possibly changes during the process runtime.
This is an unusual situation, most likely a JTAG remote stub
and some very early startup code that is setting up the page
tables. Nearly all debug sessions will have a single address
mask that cannot change during the lifetime of a Process.
Differential Revision: https://reviews.llvm.org/D149803
rdar://61900565
The majority of call sites are nullptr as the execution context.
Refactor OptionValueProperties to make the argument optional and
simplify all the callers.
Similar to fdbe7c7faa54, refactor OptionValueProperties to return a
std::optional instead of taking a fail value. This allows the caller to
handle situations where there's no value, instead of being unable to
distinguish between the absence of a value and the value happening the
match the fail value. When a fail value is required,
std::optional::value_or() provides the same functionality.
In the particular case I was looking at I autogenerated a 128 bit set
of flags that is only 64 bit. This doesn't crash lldb but it was certainly
not expected.
I suspect that we would have crashed if the top 64 bits weren't
marked as unused (or at least invoked some very undefined behaviour).
When this happens, log the details and ignore the flags. Like this:
```
Size of register flags TTBR0_EL1_flags (16 bytes) for register TTBR0_EL1 does not match the register size (8 bytes). Ignoring this set of flags.
```
Turns out a few of the tests relied on this bug so I have updated
them and added a specific test for this case.
Reviewed By: jasonmolenda
Differential Revision: https://reviews.llvm.org/D148715
These probably do not need to be in the ConstString StringPool as they
don't really need any of the advantages that ConstStrings offer.
Lifetime for these things is always static and we never need to perform
comparisons for setting descriptions.
Differential Revision: https://reviews.llvm.org/D148679
Instead of taking a `const std::string &` we can take an
`llvm::StringRef`. The motivation for this change is that many of the
callers of `ParseJSON` end up creating a temporary `std::string` from an existing
`StringRef` or `const char *` in order to satisfy the API. There's no
reason we need to do this.
Differential Revision: https://reviews.llvm.org/D148579
This teaches ProcessGDBRemote to look for "flags" nodes
in the target XML that tell you what fields a register has.
https://sourceware.org/gdb/onlinedocs/gdb/Target-Description-Format.html
It will check for various invalid inputs like:
* Flags nodes with 0 fields in them.
* Start or end being > the register size.
* Fields that overlap.
* Required properties not being present (e.g. no name).
* Flag sets being redefined.
If anything untoward is found, we'll just drop the field or the
flag set altogether. Register fields are a "nice to have" so LLDB
shouldn't be crashing because of them, instead just log anything
we throw away. So the user can fix their XML/file a bug with their
vendor.
Once that is done it will sort the fields and pass them to
the RegisterFields class I added previously.
There is no way to see these fields yet, so tests for this code
will come later when the formatting code is added.
The fields are stored in a map of unique pointers on the
ProcessGDBRemote class. It will give out raw pointers on the
assumption that the GDB process lives longer than the users
of those pointers do. Which means RegisterInfo is still a trivial struct
but we are properly destroying the fields when the GDB process ends.
We can't store the fields directly in the map because adding new
items may cause its storage to be reallocated, which would invalidate
pointers we've already given out.
Reviewed By: jasonmolenda, JDevlieghere
Differential Revision: https://reviews.llvm.org/D145574
Watchpoints from lldb-server are sent in the stop info packet
as a `reason:watchpoint` and `description:asciihex` keys; the
latter's asciihex has one to three integer values. This patch
documents the purpose of those three different numbers, and
clarifies the behavior on MIPS with the third number which is
outside the range of any watched memory range means to silently
skip the watchpoint.
lldb was previously using this silently skip watchpoint behavior
for AArch64 as well, but in the case of AArch64 we see a watchpoint
address outside of a watched memory range when the write BEGINS
before the watched memory range, but extends in to it. We don't
want to silently skip these.
Differential Revision: https://reviews.llvm.org/D147816
rdar://83996471
The high level goal of this change is to remove lldbTarget's dependency
on lldbPluginProcessUtility. The reason for this existing dependency is
so that we can create the appropriate UnixSignals object based on an
ArchSpec. Instead of using the ArchSpec, we can instead take advantage
of the Platform associated with the current Target.
This is accomplished by adding a new method to Platform,
CreateUnixSignals, which will create the correct UnixSignals object for
us. We then can use `Platform::GetUnixSignals` and rely on that to give
us the correct signals as needed.
Differential Revision: https://reviews.llvm.org/D146263
lldb was originally designed to get the watchpoint exception behavior
from the gdb remote serial protocol stub -- exceptions are either
received before the instruction executes, or after the instruction
has executed. This behavior was reported via two lldb extensions
to gdb RSP, so generic remote stubs like gdbserver or a JTAG stub,
would not tell lldb which behavior was correct, and it would default
to "exceptions are received after the instruction has executed".
Two architectures hard coded their correct "exceptions before
instruction" behavior, to work around this issue.
Most architectures have a fixed behavior of watchpoint exceptions,
and we can center that information in lldb. We can allow a remote
stub to override the default behavior via our packet extensions
if it's needed on a specific target.
This patch also separates the fetching of the number of watchpoints
from whether exceptions are before/after the insn. Currently if
lldb couldn't fetch the number of watchpoints (not really needed), it
also wouldn't get when exceptions are received, and watchpoint
handling would fail. lldb doesn't actually use the number of
watchpoints for anything beyond printing it to the user.
Differential Revision: https://reviews.llvm.org/D143215
rdar://101426626
The remote stub may give lldb hints about binaries to
be loaded, especially in a firmware type environment, and
relay those hints in the qProcessInfo response. The
binary loading was done very early in Process setup, before
we had any threads, and this made it complicated for people
to write dSYM python scripts which need access to a thread.
Delay the binary loading until a bit later in the Process
startup.
Differential Revision: https://reviews.llvm.org/D141972
rdar://104235301
The dynamic linker on Darwin, dyld, can provide status of
the process state for a few significant points early on,
most importantly, when libSystem has been initialized and it
is safe to call functions behind the scenes. Pipe this
information up from debugserver to DynamicLoaderMacOS, for
the DynamicLoader::IsFullyInitialized() method, then have
Thread::SafeToCallFunctions use this information. Finally,
for the two utility functions in the AppleObjCRuntimeV2
LanguageRuntime plugin that I was fixing, call this method
before running our utility functions to collect the list of
objc classes registered in the runtime.
User expressions will still be allowed to run any time -
we assume the user knows what they are doing - but these
two additional utility functions that they are unaware of
will be limited by this state.
Differential Revision: https://reviews.llvm.org/D139054
rdar://102436092
can probably make function calls.
This patch mechanically replaces None with std::nullopt where the
compiler would warn if None were deprecated. The intent is to reduce
the amount of manual work required in migrating from Optional to
std::optional.
This is part of an effort to migrate from llvm::Optional to
std::optional:
https://discourse.llvm.org/t/deprecating-llvm-optional-x-hasvalue-getvalue-getvalueor/63716
It's fine right now, but will break as soon as someone else declares a
PluginProperties class in the same way.
Also tighten up the scope of the anonymous namespaces surrounding the
other PluginProperties classes.
Use our "rich error" facility to propagate error reported by the stub to
the user. lldb-server reports rich launch errors as of D133352.
To make this easier to implement, and reduce code duplication, I have
moved the vRun/A/qLaunchSuccess handling into a single
GDBRemoteCommunicationClient function.
Differential Revision: https://reviews.llvm.org/D134754
This happens if the type is described elsewhere in target xml as a
<flags> or <struct>.
Also hardcode the function names into the log messages because
if you use __FUNCTION__ in a lambda you just get "operator()".
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D134043
