This test has been flaky lately
(https://github.com/llvm/llvm-project/issues/101162) and I disabled it
everywhere initially.
I found that it always uses "x86_64" for the program architecture so the
test was "passing" elsewhere but I don't think it was meant to. So I
have added a define to pass on the host's architecture when compiling.
This makes it work on AArch64 as well.
While I'm here I've fixed the uint64_t formatting warnings by using the
defined formats that'll work everywhere.
In addition, I found that the function names include "()" on Linux, so
now we check for "foo" or "foo()".
The test cpp file has never been, or was only partially formatted so
I've not formatted the changes, just kept to the local style.
I've removed the Linux skip to see if any of this helps the timeouts,
and to verify the build command changes. If the timeouts come back I'll
disable it again.
This test occasionally fails on two of the busiest CI bots (asan and
matrix), and we can't reproduce it locally. This leads to the
hypothesis that the test is timing out (in the sense of the number of
"join attempts" performed by this test's driver).
This commit doubles the number of iterations performed and also does
an NFC refactor of the main test loop so that it can be more easily
understood.
We have a handful of tests that build a driver which links against LLDB.
When running those binaries, we overwrite the dynamic loader library
path to point to the build directory's libs dir, presumably to make sure
we load LLDB from there.
This above becomes an issue when you have libc++ enabled and the driver
is linked against the system's libc++, but the dynamic loader flag
forces it to pick up libc++ from the libs dir.
We could try to make the logic for building the driver smarter and have
it pick up the just-built libc++ like we do for our test binaries, but I
don't think we need to overwrite the library path in the first place.
The build logic to build these drivers already takes care to set the
correct RPATH in the linker.
This patch removes the logic and simplifies the tests.
Fix and rename the broken and confusingly named decorator
skipIfHostIncompatibleWithRemote. The decorator is meant to skip test
which uses the inferior test build system (i.e. to build test inferiors)
to build host binaries (e.g. lldb drivers).
The decorator was broken on macOS, where the host and target platform
report macosx, but the decorator overwrote it with Darwin, resulting in
tests incorrectly being skipped.
The decorator was also missing on a handful of tests that use the
buildDriver helper, which this commit fixes as well.
Before the addition of the process "Shadow Listener" you could only have one
Listener observing the Process Broadcaster. That was necessary because fetching the
Process event is what switches the public process state, and for the execution
control logic to be manageable you needed to keep other listeners from causing
this to happen before the main process control engine was ready.
Ismail added the notion of a "ShadowListener" - which allowed you ONE
extra process listener. This patch inverts that setup by designating the
first listener as primary - and giving it priority in fetching events.
Differential Revision: https://reviews.llvm.org/D157556
This is an ongoing series of commits that are reformatting our Python
code. Reformatting is done with `black` (23.1.0).
If you end up having problems merging this commit because you have made
changes to a python file, the best way to handle that is to run `git
checkout --ours <yourfile>` and then reformat it with black.
RFC: https://discourse.llvm.org/t/rfc-document-and-standardize-python-code-style
Differential revision: https://reviews.llvm.org/D151460
Revert while I investigate two CI bot failures;
the more important is the lldb-arm-ubuntu where
the FixAddress is removing the 0th bit so we're
adding the `actual=` decorator on a string pointer,
```
Got output:
(char *) strptr = 0x00400817 (actual=0x400816) ptr = [{ },{H}]
```
in TestDataFormatterSmartArray.py line 229.
This reverts commit 4d635be2dbadc77522eddc9668697385a3b9f8b4.
On target where metadata is stored in bits that aren't used for
virtual addressing -- AArch64 Top Byte Ignore and pointer authentication
are two examples -- an SBValue object representing a pointer will
return the address with metadata for SBValue::GetValueAsUnsigned.
Users may want to get the virtual address without the metadata;
this new method gives them a way to do this.
Differential Revision: https://reviews.llvm.org/D142792
In situations where only LLDB is ASANified, a false positive occurs
unless ASAN_OPTIONS=detect_container_overflow=0 is set in the
environment.
Differential Revision: https://reviews.llvm.org/D143772
Some test cases are already marked @skipIfNoSBHeaders, but they make use of SBAPI headers in test setup. The setup will fail if the headers are missing, so it is too late to wait until the test case to apply the skip annotation.
In addition to allowing this to apply to entire classes, I also changed all the existing annotations from test cases to test classes where necessary/appropriate.
Reviewed By: DavidSpickett
Differential Revision: https://reviews.llvm.org/D138181
* Include SetCallback in SBBreakpointLocation, similar as in SBBreakpoint.
* Add test_breakpoint_location_callback test as part of TestMultithreaded.
Reviewed By: werat, JDevlieghere
Differential Revision: https://reviews.llvm.org/D133689
Co-authored-by: Andy Yankovsky <weratt@gmail.com>
Eliminate boilerplate of having each test manually assign to `mydir` by calling
`compute_mydir` in lldbtest.py.
Differential Revision: https://reviews.llvm.org/D128077
A non-zero exit code from the test binary results in a
CalledProcessError. Without catching the exception, that would result in
a error (unresolved test) instead of a failure. This patch fixes that.
This patch remove XFAIL decorator from tests which as passing on AArch64
Windows. This is tested on surface pro x using tot llvm and clang 14.0.3
as compiler with visual studio 2019 x86_arm64 environment.
At the moment nearly every test calls something similar to
`self.dbg.CreateTarget(self.getBuildArtifact("a.out"))` and them sometimes
checks if the created target is actually valid with something like
`self.assertTrue(target.IsValid(), "some useless text")`.
Beside being really verbose the error messages generated by this pattern are
always just indicating that the target failed to be created but now why.
This patch introduces a helper function `createTestTarget` to our Test class
that creates the target with the much more verbose `CreateTarget` overload that
gives us back an SBError (with a fancy error). If the target couldn't be created
the function prints out the SBError that LLDB returned and asserts for us. It
also defaults to the "a.out" build artifact path that nearly all tests are using
to avoid to hardcode "a.out" in every test.
I converted a bunch of tests to the new function but I'll do the rest of the
test suite as follow ups.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D102771
TestMultipleTargets.py fails randomly on Arm/AArch64 Linux buildbot with
no reasonable clues. I am marking it skipped for avoiding LLDB buildbot
failures due to this test.
Explicitly consider the libraries reported on the initial rendezvous
breakpoint hit added. This is necessary on FreeBSD since the dynamic
loader issues only a single 'consistent' state rendezvous breakpoint hit
for all the libraries present in DT_NEEDED. It is also helpful on Linux
where it ensures that ld-linux is considered loaded as well
as the shared system libraries reported afterwards.
Reenable memory maps on FreeBSD since this fixed the issue triggered
by them.
Differential Revision: https://reviews.llvm.org/D92187
This reverts commit 09b08833f301ea375137931d26b7193101f82ceb.
This code is wrong on Linux, and causes ld-linux and linux-vdso to be
reported twice. I need to work on it more.
Explicitly consider the libraries reported on the initial eTakeSnapshot
action added, through adding them to the added soentry list
in DYLDRendezvous::SaveSOEntriesFromRemote(). This is necessary
on FreeBSD since the dynamic loader issues only a single 'consistent'
state rendezvous breakpoint hit for all the libraries present
in DT_NEEDED (while Linux issues an added-consistent event pair).
Reenable memory maps on FreeBSD since this fixed the issue triggered
by them.
Differential Revision: https://reviews.llvm.org/D92187
Make category-specifying files visible. There is really no good reason
to keep them hidden, and having them visible increases the chances
that someone will actually spot them.
Differential Revision: https://reviews.llvm.org/D91065
The new FreeBSDRemote plugin has reached feature parity on i386
and amd64 targets. Use it by default on these architectures, while
allowing the use of the legacy plugin via FREEBSD_LEGACY_PLUGIN envvar.
Revisit the method of switching plugins. Apparently, the return value
of PlatformFreeBSD::CanDebugProcess() is what really decides whether
the legacy or the new plugin is used.
Update the test status. Reenable the tests that were previously
disabled on FreeBSD and do not cause hangs or are irrelevant to FreeBSD.
Mark all tests that fail reliably as expectedFailure. For now, tests
that are flaky (i.e. produce unstable results) are left enabled
and cause unpredictable test failures.
Differential Revision: https://reviews.llvm.org/D90757
The intention is not to allow stop-hook commands to query the
user, so this is correct. It also works around a deadlock in
switching to the Python Session to execute python based commands
in the stop hook when the Debugger stdin is backed by a FILE *.
Differential Revision: https://reviews.llvm.org/D90332
With the log file being a build artifact we don't need to clean it up.
If this happens before the reproducer is captured, the file will be
missing from the reproducer root but being part of the mapping.
The comment says that TestMultipleDebuggers was XFAILed because it was
failing nondeterministically in which case it should be skipped not
failed (as XPASS will cause the test suite to fail).
The reason it fails is because it was not marked as a no-debug-info test
case. I've ran the test in a loop and it has been passing consistently.
Let's enable it and see if the bots agree, if not we can skip it.
Summary:
Around a third of our test sources have LLVM license headers. This patch removes those headers from all test
sources and also fixes any tests that depended on the length of the license header.
The reasons for this are:
* A few tests verify line numbers and will start failing if the number of lines in the LLVM license header changes. Once I landed my patch for valid SourceLocations in debug info we will probably have even more tests that verify line numbers.
* No other LLVM project is putting license headers in its test files to my knowledge.
* They make the test sources much more verbose than they have to be. Several tests have longer license headers than the actual test source.
For the record, the following tests had their line numbers changed to pass with the removal of the license header:
lldb-api :: functionalities/breakpoint/breakpoint_by_line_and_column/TestBreakpointByLineAndColumn.py
lldb-shell :: Reproducer/TestGDBRemoteRepro.test
lldb-shell :: Reproducer/TestMultipleTargets.test
lldb-shell :: Reproducer/TestReuseDirectory.test
lldb-shell :: ExecControl/StopHook/stop-hook-threads.test
lldb-shell :: ExecControl/StopHook/stop-hook.test
lldb-api :: lang/objc/exceptions/TestObjCExceptions.py
Reviewers: #lldb, espindola, JDevlieghere
Reviewed By: #lldb, JDevlieghere
Subscribers: emaste, aprantl, arphaman, JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74839
Summary: Moves lldbsuite tests to lldb/test/API.
This is a largely mechanical change, moved with the following steps:
```
rm lldb/test/API/testcases
mkdir -p lldb/test/API/{test_runner/test,tools/lldb-{server,vscode}}
mv lldb/packages/Python/lldbsuite/test/test_runner/test lldb/test/API/test_runner
for d in $(find lldb/packages/Python/lldbsuite/test/* -maxdepth 0 -type d | egrep -v "make|plugins|test_runner|tools"); do mv $d lldb/test/API; done
for d in $(find lldb/packages/Python/lldbsuite/test/tools/lldb-vscode -maxdepth 1 -mindepth 1 | grep -v ".py"); do mv $d lldb/test/API/tools/lldb-vscode; done
for d in $(find lldb/packages/Python/lldbsuite/test/tools/lldb-server -maxdepth 1 -mindepth 1 | egrep -v "gdbremote_testcase.py|lldbgdbserverutils.py|socket_packet_pump.py"); do mv $d lldb/test/API/tools/lldb-server; done
```
lldb/packages/Python/lldbsuite/__init__.py and lldb/test/API/lit.cfg.py were also updated with the new directory structure.
Reviewers: labath, JDevlieghere
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D71151
