We used to save out and eagerly load a (potentially huge) table of merged
formerly-canonical declarations when we loaded each module. This was extremely
inefficient in the presence of large amounts of merging, and didn't actually
save any merging lookup work, because we still needed to perform name lookup to
check that our merged declaration lists were complete. This also resulted in a
loss of laziness -- even if we only needed an early declaration of an entity, we
would eagerly pull in all declarations that had been merged into it regardless.
We now store the relevant fragments of the table within the declarations
themselves. In detail:
* The first declaration of each entity within a module stores a list of first
declarations from imported modules that are merged into it.
* Loading that declaration pre-loads those other entities, so that they appear
earlier within the redeclaration chain.
* The name lookup tables list the most recent local lookup result, if there
is one, or all directly-imported lookup results if not.
llvm-svn: 231424
dynamic classes in the translation unit and check whether each one's key
function is defined when we got to the end of the TU (and when we got to the
end of each module). This is really terrible for modules performance, since it
causes unnecessary deserialization of every dynamic class in every compilation.
We now use a much simpler (and, in a modules build, vastly more efficient)
system: when we see an out-of-line definition of a virtual function, we check
whether that function was in fact its class's key function. (If so, we need to
emit the vtable.)
llvm-svn: 230830
This is a necessary prerequisite for debugging with modules.
The .pcm files become containers that hold the serialized AST which allows
us to store debug information in the module file that can be shared by all
object files that were built importing the module.
This reapplies r230044 with a fixed configure+make build and updated
dependencies and testcase requirements. Over the last iteration this
version adds
- missing target requirements for testcases that specify an x86 triple,
- a missing clangCodeGen.a dependency to libClang.a in the make build.
rdar://problem/19104245
llvm-svn: 230423
This is a necessary prerequisite for debugging with modules.
The .pcm files become containers that hold the serialized AST which allows
us to store debug information in the module file that can be shared by all
object files that were built importing the module.
rdar://problem/19104245
This reapplies r230044 with a fixed configure+make build and updated
dependencies. Take 3.
llvm-svn: 230305
This is a necessary prerequisite for debugging with modules.
The .pcm files become containers that hold the serialized AST which allows
us to store debug information in the module file that can be shared by all
object files that were built importing the module.
rdar://problem/19104245
This reapplies r230044 with a fixed configure+make build and updated
dependencies. Take 2.
llvm-svn: 230089
This is a necessary prerequisite for debugging with modules.
The .pcm files become containers that hold the serialized AST which allows
us to store debug information in the module file that can be shared by all
object files that were built importing the module.
rdar://problem/19104245
This reapplies r230044 with a fixed configure+make build and updated
dependencies.
llvm-svn: 230067
There are two issues here:
1) It's too late to rebuild at this point, because we won't go through
removeModules and when we try to reload the new .pcm we'll get the old
one instead. We might be able to call removeModules after an OutOfDate
here, but I'm not yet confident that it is always safe to do so.
2) In practice, this check fails spuriously when the umbrella header
appears to change because of a VFS change that means it maps to a
different copy of the same file. Because of this, we just skip the
check for now.
llvm-svn: 230064
This is a necessary prerequisite for debugging with modules.
The .pcm files become containers that hold the serialized AST which allows
us to store debug information in the module file that can be shared by all
object files that were built importing the module.
rdar://problem/19104245
llvm-svn: 230044
the one in the current compiler invocation. If they differ reject the PCH.
This protects against the badness occurring from getting modules loaded from different module caches (see crashes).
rdar://19889860
llvm-svn: 229909
The member gets invalidated as elements are added to the dense set. Directly
access the underlying pointer instead. Not sure how to create a test case for
this :-(. Maybe Richard can help.
llvm-svn: 229673
When mangling the module map path into a .pcm file name, also mangle the
IsSystem bit, which can also depend on the header search paths. For
example, the user may change from -I to -isystem. This can affect
diagnostics in the importing TU.
llvm-svn: 228966
encountered any definition for the class; this happens when the definition is
added by an update record that is not yet loaded. In such a case, eagerly pick
the original parent of the member as the canonical definition of the class
rather than muddling through with the canonical declaration (the latter can
lead to us failing to merge properly later if the canonical definition turns
out to be some other declaration).
llvm-svn: 226977
This just tweaks the fix from r224892 (which handled PCHs) to work with
modules, where we will serialize each method individually and hence the
hasMoreThanOneDecl bit needs to be updated as we add the methods.
llvm-svn: 225659
This fixes PR21587, what r221933 fixed for regular programs is now also
fixed for decls coming from PCH files.
Use another bit from the count/bits uint16_t for storing the "more than one
decl" bit. This reduces the number of bits for the count from 14 to 13.
The selector with the most overloads in Cocoa.h has ~55 overloads, so 13 bits
should still be plenty. Since this changes the meaning of a serialized bit
pattern, also increase clang::serialization::VERSION_MAJOR.
Storing the "more than one decl" state of only the first overload isn't quite
correct, but Sema::AreMultipleMethodsInGlobalPool() currently only looks at
the state of the first overload so it's good enough for now.
llvm-svn: 224892
Remove ObjCMethodList::Count, instead store a "has more than one decl" bit in
the low bit of the ObjCMethodDecl pointer, using a PointerIntPair.
Most of this patch is replacing ".Method" with ".getMethod()".
No intended behavior change.
llvm-svn: 224876
module, use the path from the module map file in preference to the path from
the .pcm file when resolving relative paths in the .pcm file. This allows
diagnostics (and .d output) to give relative paths if the module was found via
a relative path.
llvm-svn: 223577
the root of the module and use paths relative to that directory wherever
possible. This is a step towards allowing explicit modules to be relocated
without being rebuilt, which is important for some kinds of distributed builds,
for good paths in diagnostics, and for appropriate .d output.
This is a recommit of r223443, reverted in r223465; when joining together
imported file paths, we now use the system's separator rather than always
using '/'. This avoids path mismatches between the original module build and
the module user on Windows (at least, in some cases). A more comprehensive
fix will follow.
llvm-svn: 223539
the root of the module and use paths relative to that directory wherever
possible. This is a step towards allowing explicit modules to be relocated
without being rebuilt, which is important for some kinds of distributed builds,
for good paths in diagnostics, and for appropriate .d output.
llvm-svn: 223443
rather than trying to extract this information from the FileEntry after the
fact.
This has a number of beneficial effects. For instance, diagnostic messages for
failed module builds give a path relative to the "module root" rather than an
absolute file path, and the contents of the module includes file is no longer
dependent on what files the including TU happened to inspect prior to
triggering the module build.
llvm-svn: 223095
special member function.
No test yet: the only testcases we have for this issue are extremely complex.
Testcase will be added once I get a reasonable reduction.
llvm-svn: 222506
is enabled. Unlike system headers, we want to be more careful about
modifications to user headers, because it's still easy to edit a header
while you're building.
llvm-svn: 221634
Use the bitmask to store the set of enabled sanitizers instead of a
bitfield. On the negative side, it makes syntax for querying the
set of enabled sanitizers a bit more clunky. On the positive side, we
will be able to use SanitizerKind to eventually implement the
new semantics for -fsanitize-recover= flag, that would allow us
to make some sanitizers recoverable, and some non-recoverable.
No functionality change.
llvm-svn: 221558
explicitly using the resulting .pcm file. Unlike for an implicit module build,
we don't need nor want to require these flags to match between the module
and its users.
llvm-svn: 220780
Since the order of the IDs in the AST file (e.g. DeclIDs, SelectorIDs)
is not stable, it is not safe to load an AST file that depends on
another AST file that has been rebuilt since the importer was built,
even if "nothing changed". We previously used size and modtime to check
this, but I've seen cases where a module rebuilt quickly enough to foil
this check and caused very hard to debug build errors.
To save cycles when we're loading the AST, we just generate a random
nonce value and check that it hasn't changed when we load an imported
module, rather than actually hash the whole file.
This is slightly complicated by the fact that we need to verify the
signature inside addModule, since we might otherwise consider that a
mdoule is "OutOfDate" when really it is the importer that is out of
date. I didn't see any regressions in module load time after this
change.
llvm-svn: 220493
