9adbb5cb3a
Many tests use opt's -analyze feature, which does not translate well to
NPM and has better alternatives. The alternative here is to explicitly
add a pass that calls ScalarEvolution::print().
The legacy pass manager RUNs aren't changing, but they are now pinned to
the legacy pass manager. For each legacy pass manager RUN, I added a
corresponding NPM RUN using the 'print<scalar-evolution>' pass. For
compatibility with update_analyze_test_checks.py and existing test
CHECKs, 'print<scalar-evolution>' now prints what -analyze prints per
function.
This was generated by the following Python script and failures were
manually fixed up:
import sys
for i in sys.argv:
with open(i, 'r') as f:
s = f.read()
with open(i, 'w') as f:
for l in s.splitlines():
if "RUN:" in l and ' -analyze ' in l and '\\' not in l:
f.write(l.replace(' -analyze ', ' -analyze -enable-new-pm=0 '))
f.write('\n')
f.write(l.replace(' -analyze ', ' -disable-output ').replace(' -scalar-evolution ', ' "-passes=print<scalar-evolution>" ').replace(" | ", " 2>&1 | "))
f.write('\n')
else:
f.write(l)
There are a couple failures still in ScalarEvolution under NPM, but
those are due to other unrelated naming conflicts.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D83798
77 lines
4.9 KiB
LLVM
77 lines
4.9 KiB
LLVM
; NOTE: Assertions have been autogenerated by utils/update_analyze_test_checks.py
|
|
; RUN: opt < %s -S -analyze -enable-new-pm=0 -scalar-evolution | FileCheck %s
|
|
; RUN: opt < %s -S -disable-output "-passes=print<scalar-evolution>" 2>&1 | FileCheck %s
|
|
|
|
; Reduced from test-suite/MultiSource/Benchmarks/MiBench/office-ispell/correct.c
|
|
; getelementptr, obviously, takes pointer as it's base, and returns a pointer.
|
|
; SCEV operands are sorted in hope that it increases folding potential,
|
|
; and at the same time SCEVAddExpr's type is the type of the last(!) operand.
|
|
; Which means, in some exceedingly rare cases, pointer operand may happen to
|
|
; end up not being the last operand, and as a result SCEV for GEP will suddenly
|
|
; have a non-pointer return type. We should ensure that does not happen.
|
|
|
|
target datalayout = "e-m:e-p270:32:32-p271:32:32-p272:64:64-i64:64-f80:128-n8:16:32:64-S128"
|
|
target triple = "x86_64-unknown-linux-gnu"
|
|
|
|
@c = dso_local local_unnamed_addr global i32* null, align 8
|
|
@a = dso_local local_unnamed_addr global i32 0, align 4
|
|
@b = dso_local global [1 x i32] zeroinitializer, align 4
|
|
|
|
define i32 @d(i32 %base) {
|
|
; CHECK-LABEL: 'd'
|
|
; CHECK-NEXT: Classifying expressions for: @d
|
|
; CHECK-NEXT: %e = alloca [1 x [1 x i8]], align 1
|
|
; CHECK-NEXT: --> %e U: full-set S: full-set
|
|
; CHECK-NEXT: %0 = bitcast [1 x [1 x i8]]* %e to i8*
|
|
; CHECK-NEXT: --> %e U: full-set S: full-set
|
|
; CHECK-NEXT: %f.0 = phi i32 [ %base, %entry ], [ %inc, %for.cond ]
|
|
; CHECK-NEXT: --> {%base,+,1}<nsw><%for.cond> U: full-set S: full-set Exits: <<Unknown>> LoopDispositions: { %for.cond: Computable }
|
|
; CHECK-NEXT: %idxprom = sext i32 %f.0 to i64
|
|
; CHECK-NEXT: --> {(sext i32 %base to i64),+,1}<nsw><%for.cond> U: [-2147483648,-9223372036854775808) S: [-2147483648,-9223372036854775808) Exits: <<Unknown>> LoopDispositions: { %for.cond: Computable }
|
|
; CHECK-NEXT: %arrayidx = getelementptr inbounds [1 x [1 x i8]], [1 x [1 x i8]]* %e, i64 0, i64 %idxprom
|
|
; CHECK-NEXT: --> {((sext i32 %base to i64) + %e)<nsw>,+,1}<nsw><%for.cond> U: full-set S: full-set Exits: <<Unknown>> LoopDispositions: { %for.cond: Computable }
|
|
; CHECK-NEXT: %1 = load i32*, i32** @c, align 8
|
|
; CHECK-NEXT: --> %1 U: full-set S: full-set Exits: <<Unknown>> LoopDispositions: { %for.cond: Variant }
|
|
; CHECK-NEXT: %sub.ptr.lhs.cast = ptrtoint i32* %1 to i64
|
|
; CHECK-NEXT: --> %sub.ptr.lhs.cast U: full-set S: full-set Exits: <<Unknown>> LoopDispositions: { %for.cond: Variant }
|
|
; CHECK-NEXT: %sub.ptr.sub = sub i64 %sub.ptr.lhs.cast, ptrtoint ([1 x i32]* @b to i64)
|
|
; CHECK-NEXT: --> ((-1 * ptrtoint ([1 x i32]* @b to i64)) + %sub.ptr.lhs.cast) U: full-set S: full-set Exits: <<Unknown>> LoopDispositions: { %for.cond: Variant }
|
|
; CHECK-NEXT: %sub.ptr.div = sdiv exact i64 %sub.ptr.sub, 4
|
|
; CHECK-NEXT: --> %sub.ptr.div U: full-set S: [-2305843009213693952,2305843009213693952) Exits: <<Unknown>> LoopDispositions: { %for.cond: Variant }
|
|
; CHECK-NEXT: %arrayidx1 = getelementptr inbounds [1 x i8], [1 x i8]* %arrayidx, i64 0, i64 %sub.ptr.div
|
|
; CHECK-NEXT: --> ({((sext i32 %base to i64) + %e)<nsw>,+,1}<nsw><%for.cond> + %sub.ptr.div)<nsw> U: full-set S: full-set Exits: <<Unknown>> LoopDispositions: { %for.cond: Variant }
|
|
; CHECK-NEXT: %2 = load i8, i8* %arrayidx1, align 1
|
|
; CHECK-NEXT: --> %2 U: full-set S: full-set Exits: <<Unknown>> LoopDispositions: { %for.cond: Variant }
|
|
; CHECK-NEXT: %conv = sext i8 %2 to i32
|
|
; CHECK-NEXT: --> (sext i8 %2 to i32) U: [-128,128) S: [-128,128) Exits: <<Unknown>> LoopDispositions: { %for.cond: Variant }
|
|
; CHECK-NEXT: %inc = add nsw i32 %f.0, 1
|
|
; CHECK-NEXT: --> {(1 + %base),+,1}<nw><%for.cond> U: full-set S: full-set Exits: <<Unknown>> LoopDispositions: { %for.cond: Computable }
|
|
; CHECK-NEXT: Determining loop execution counts for: @d
|
|
; CHECK-NEXT: Loop %for.cond: <multiple exits> Unpredictable backedge-taken count.
|
|
; CHECK-NEXT: Loop %for.cond: Unpredictable max backedge-taken count.
|
|
; CHECK-NEXT: Loop %for.cond: Unpredictable predicated backedge-taken count.
|
|
;
|
|
entry:
|
|
%e = alloca [1 x [1 x i8]], align 1
|
|
%0 = bitcast [1 x [1 x i8]]* %e to i8*
|
|
call void @llvm.lifetime.start.p0i8(i64 1, i8* %0) #2
|
|
br label %for.cond
|
|
|
|
for.cond: ; preds = %for.cond, %entry
|
|
%f.0 = phi i32 [ %base, %entry ], [ %inc, %for.cond ]
|
|
%idxprom = sext i32 %f.0 to i64
|
|
%arrayidx = getelementptr inbounds [1 x [1 x i8]], [1 x [1 x i8]]* %e, i64 0, i64 %idxprom
|
|
%1 = load i32*, i32** @c, align 8
|
|
%sub.ptr.lhs.cast = ptrtoint i32* %1 to i64
|
|
%sub.ptr.sub = sub i64 %sub.ptr.lhs.cast, ptrtoint ([1 x i32]* @b to i64)
|
|
%sub.ptr.div = sdiv exact i64 %sub.ptr.sub, 4
|
|
%arrayidx1 = getelementptr inbounds [1 x i8], [1 x i8]* %arrayidx, i64 0, i64 %sub.ptr.div
|
|
%2 = load i8, i8* %arrayidx1, align 1
|
|
%conv = sext i8 %2 to i32
|
|
store i32 %conv, i32* @a, align 4
|
|
%inc = add nsw i32 %f.0, 1
|
|
br label %for.cond
|
|
}
|
|
|
|
declare void @llvm.lifetime.start.p0i8(i64 immarg, i8* nocapture)
|