shylie/llvm-project
1
0
Fork 0
Code Issues Pull Requests Actions 6 Packages Projects Releases Wiki Activity
llvm-project/llvm/test/Transforms/LoopVectorize/first-order-recurrence-complex.ll
Florian Hahn 9d24933f79 Recommit f0c2a5a "[LV] Generalize conditions for sinking instrs for first order recurrences." 
This version contains 2 fixes for reported issues:
1. Make sure we do not try to sink terminator instructions.
2. Make sure we bail out, if we try to sink an instruction that needs to
   stay in place for another recurrence.

Original message:
If the recurrence PHI node has a single user, we can sink any
instruction without side effects, given that all users are dominated by
the instruction computing the incoming value of the next iteration
('Previous'). We can sink instructions that may cause traps, because
that only causes the trap to occur later, but not on any new paths.

With the relaxed check, we also have to make sure that we do not have a
direct cycle (meaning PHI user == 'Previous), which indicates a
reduction relation, which potentially gets missed by
ReductionDescriptor.

As follow-ups, we can also sink stores, iff they do not alias with
other instructions we move them across and we could also support sinking
chains of instructions and multiple users of the PHI.

Fixes PR43398.

Reviewers: hsaito, dcaballe, Ayal, rengolin

Reviewed By: Ayal

Differential Revision: https://reviews.llvm.org/D69228
2019-11-24 21:21:55 +00:00

246 lines
9.9 KiB
LLVM
Raw Blame History

; RUN: opt -loop-vectorize -force-vector-width=4 -force-vector-interleave=1 -S %s | FileCheck %s
@p = external local_unnamed_addr global [257 x i32], align 16
@q = external local_unnamed_addr global [257 x i32], align 16
; Test case for PR43398.
define void @can_sink_after_store(i32 %x, i32* %ptr, i64 %tc) local_unnamed_addr #0 {
; CHECK-LABEL: vector.ph:
; CHECK: %broadcast.splatinsert1 = insertelement <4 x i32> undef, i32 %x, i32 0
; CHECK-NEXT: %broadcast.splat2 = shufflevector <4 x i32> %broadcast.splatinsert1, <4 x i32> undef, <4 x i32> zeroinitializer
; CHECK-NEXT: %vector.recur.init = insertelement <4 x i32> undef, i32 %.pre, i32 3
; CHECK-NEXT: br label %vector.body
; CHECK-LABEL: vector.body:
; CHECK-NEXT: %index = phi i64 [ 0, %vector.ph ], [ %index.next, %vector.body ]
; CHECK-NEXT: %vector.recur = phi <4 x i32> [ %vector.recur.init, %vector.ph ], [ %wide.load, %vector.body ]
; CHECK-NEXT: %offset.idx = add i64 1, %index
; CHECK-NEXT: %broadcast.splatinsert = insertelement <4 x i64> undef, i64 %offset.idx, i32 0
; CHECK-NEXT: %broadcast.splat = shufflevector <4 x i64> %broadcast.splatinsert, <4 x i64> undef, <4 x i32> zeroinitializer
; CHECK-NEXT: %induction = add <4 x i64> %broadcast.splat, <i64 0, i64 1, i64 2, i64 3>
; CHECK-NEXT: %0 = add i64 %offset.idx, 0
; CHECK-NEXT: %1 = getelementptr inbounds [257 x i32], [257 x i32]* @p, i64 0, i64 %0
; CHECK-NEXT: %2 = getelementptr inbounds i32, i32* %1, i32 0
; CHECK-NEXT: %3 = bitcast i32* %2 to <4 x i32>*
; CHECK-NEXT: %wide.load = load <4 x i32>, <4 x i32>* %3, align 4
; CHECK-NEXT: %4 = shufflevector <4 x i32> %vector.recur, <4 x i32> %wide.load, <4 x i32> <i32 3, i32 4, i32 5, i32 6>
; CHECK-NEXT: %5 = add <4 x i32> %4, %broadcast.splat2
; CHECK-NEXT: %6 = add <4 x i32> %5, %wide.load
; CHECK-NEXT: %7 = getelementptr inbounds [257 x i32], [257 x i32]* @q, i64 0, i64 %0
; CHECK-NEXT: %8 = getelementptr inbounds i32, i32* %7, i32 0
; CHECK-NEXT: %9 = bitcast i32* %8 to <4 x i32>*
; CHECK-NEXT: store <4 x i32> %6, <4 x i32>* %9, align 4
; CHECK-NEXT: %index.next = add i64 %index, 4
; CHECK-NEXT: %10 = icmp eq i64 %index.next, 1996
; CHECK-NEXT: br i1 %10, label %middle.block, label %vector.body
;
entry:
br label %preheader
preheader:
%idx.phi.trans = getelementptr inbounds [257 x i32], [257 x i32]* @p, i64 0, i64 1
%.pre = load i32, i32* %idx.phi.trans, align 4
br label %for
for:
%pre.phi = phi i32 [ %.pre, %preheader ], [ %pre.next, %for ]
%iv = phi i64 [ 1, %preheader ], [ %iv.next, %for ]
%add.1 = add i32 %pre.phi, %x
%idx.1 = getelementptr inbounds [257 x i32], [257 x i32]* @p, i64 0, i64 %iv
%pre.next = load i32, i32* %idx.1, align 4
%add.2 = add i32 %add.1, %pre.next
%idx.2 = getelementptr inbounds [257 x i32], [257 x i32]* @q, i64 0, i64 %iv
store i32 %add.2, i32* %idx.2, align 4
%iv.next = add nuw nsw i64 %iv, 1
%exitcond = icmp eq i64 %iv.next, 2000
br i1 %exitcond, label %exit, label %for
exit:
ret void
}
; We can sink potential trapping instructions, as this will only delay the trap
; and not introduce traps on additional paths.
define void @sink_sdiv(i32 %x, i32* %ptr, i64 %tc) local_unnamed_addr #0 {
; CHECK-LABEL: vector.ph:
; CHECK: %broadcast.splatinsert1 = insertelement <4 x i32> undef, i32 %x, i32 0
; CHECK-NEXT: %broadcast.splat2 = shufflevector <4 x i32> %broadcast.splatinsert1, <4 x i32> undef, <4 x i32> zeroinitializer
; CHECK-NEXT: %vector.recur.init = insertelement <4 x i32> undef, i32 %.pre, i32 3
; CHECK-NEXT: br label %vector.body
; CHECK-LABEL: vector.body:
; CHECK-NEXT: %index = phi i64 [ 0, %vector.ph ], [ %index.next, %vector.body ]
; CHECK-NEXT: %vector.recur = phi <4 x i32> [ %vector.recur.init, %vector.ph ], [ %wide.load, %vector.body ]
; CHECK-NEXT: %offset.idx = add i64 1, %index
; CHECK-NEXT: %broadcast.splatinsert = insertelement <4 x i64> undef, i64 %offset.idx, i32 0
; CHECK-NEXT: %broadcast.splat = shufflevector <4 x i64> %broadcast.splatinsert, <4 x i64> undef, <4 x i32> zeroinitializer
; CHECK-NEXT: %induction = add <4 x i64> %broadcast.splat, <i64 0, i64 1, i64 2, i64 3>
; CHECK-NEXT: %0 = add i64 %offset.idx, 0
; CHECK-NEXT: %1 = getelementptr inbounds [257 x i32], [257 x i32]* @p, i64 0, i64 %0
; CHECK-NEXT: %2 = getelementptr inbounds i32, i32* %1, i32 0
; CHECK-NEXT: %3 = bitcast i32* %2 to <4 x i32>*
; CHECK-NEXT: %wide.load = load <4 x i32>, <4 x i32>* %3, align 4
; CHECK-NEXT: %4 = shufflevector <4 x i32> %vector.recur, <4 x i32> %wide.load, <4 x i32> <i32 3, i32 4, i32 5, i32 6>
; CHECK-NEXT: %5 = sdiv <4 x i32> %4, %broadcast.splat2
; CHECK-NEXT: %6 = add <4 x i32> %5, %wide.load
; CHECK-NEXT: %7 = getelementptr inbounds [257 x i32], [257 x i32]* @q, i64 0, i64 %0
; CHECK-NEXT: %8 = getelementptr inbounds i32, i32* %7, i32 0
; CHECK-NEXT: %9 = bitcast i32* %8 to <4 x i32>*
; CHECK-NEXT: store <4 x i32> %6, <4 x i32>* %9, align 4
; CHECK-NEXT: %index.next = add i64 %index, 4
; CHECK-NEXT: %10 = icmp eq i64 %index.next, 1996
; CHECK-NEXT: br i1 %10, label %middle.block, label %vector.body
;
entry:
br label %preheader
preheader:
%idx.phi.trans = getelementptr inbounds [257 x i32], [257 x i32]* @p, i64 0, i64 1
%.pre = load i32, i32* %idx.phi.trans, align 4
br label %for
for:
%pre.phi = phi i32 [ %.pre, %preheader ], [ %pre.next, %for ]
%iv = phi i64 [ 1, %preheader ], [ %iv.next, %for ]
%div.1 = sdiv i32 %pre.phi, %x
%idx.1 = getelementptr inbounds [257 x i32], [257 x i32]* @p, i64 0, i64 %iv
%pre.next = load i32, i32* %idx.1, align 4
%add.2 = add i32 %div.1, %pre.next
%idx.2 = getelementptr inbounds [257 x i32], [257 x i32]* @q, i64 0, i64 %iv
store i32 %add.2, i32* %idx.2, align 4
%iv.next = add nuw nsw i64 %iv, 1
%exitcond = icmp eq i64 %iv.next, 2000
br i1 %exitcond, label %exit, label %for
exit:
ret void
}
; FIXME: Currently we can only sink a single instruction. For the example below,
; we also have to sink users.
define void @cannot_sink_with_additional_user(i32 %x, i32* %ptr, i64 %tc) {
; CHECK-LABEL: define void @cannot_sink_with_additional_user(
; CHECK-NEXT: entry:
; CHECK-NEXT: br label %preheader
; CHECK-LABEL: preheader: ; preds = %entry
; CHECK: br label %for
; CHECK-LABEL: for: ; preds = %for, %preheader
; CHECK br i1 %exitcond, label %exit, label %for
; CHECK-LABEL: exit:
; CHECK-NEXT: ret void
entry:
br label %preheader
preheader:
%idx.phi.trans = getelementptr inbounds [257 x i32], [257 x i32]* @p, i64 0, i64 1
%.pre = load i32, i32* %idx.phi.trans, align 4
br label %for
for:
%pre.phi = phi i32 [ %.pre, %preheader ], [ %pre.next, %for ]
%iv = phi i64 [ 1, %preheader ], [ %iv.next, %for ]
%add.1 = add i32 %pre.phi, %x
%add.2 = add i32 %add.1, %x
%idx.1 = getelementptr inbounds [257 x i32], [257 x i32]* @p, i64 0, i64 %iv
%pre.next = load i32, i32* %idx.1, align 4
%add.3 = add i32 %add.1, %pre.next
%add.4 = add i32 %add.2, %add.3
%idx.2 = getelementptr inbounds [257 x i32], [257 x i32]* @q, i64 0, i64 %iv
store i32 %add.4, i32* %idx.2, align 4
%iv.next = add nuw nsw i64 %iv, 1
%exitcond = icmp eq i64 %iv.next, 2000
br i1 %exitcond, label %exit, label %for
exit:
ret void
}
; FIXME: We can sink a store, if we can guarantee that it does not alias any
; loads/stores in between.
define void @cannot_sink_store(i32 %x, i32* %ptr, i64 %tc) {
; CHECK-LABEL: define void @cannot_sink_store(
; CHECK-NEXT: entry:
; CHECK-NEXT: br label %preheader
; CHECK-LABEL: preheader: ; preds = %entry
; CHECK: br label %for
; CHECK-LABEL: for: ; preds = %for, %preheader
; CHECK br i1 %exitcond, label %exit, label %for
; CHECK-LABEL: exit:
; CHECK-NEXT: ret void
;
entry:
br label %preheader
preheader:
%idx.phi.trans = getelementptr inbounds [257 x i32], [257 x i32]* @p, i64 0, i64 1
%.pre = load i32, i32* %idx.phi.trans, align 4
br label %for
for:
%pre.phi = phi i32 [ %.pre, %preheader ], [ %pre.next, %for ]
%iv = phi i64 [ 1, %preheader ], [ %iv.next, %for ]
%add.1 = add i32 %pre.phi, %x
store i32 %add.1, i32* %ptr
%idx.1 = getelementptr inbounds [257 x i32], [257 x i32]* @p, i64 0, i64 %iv
%pre.next = load i32, i32* %idx.1, align 4
%add.2 = add i32 %add.1, %pre.next
%idx.2 = getelementptr inbounds [257 x i32], [257 x i32]* @q, i64 0, i64 %iv
store i32 %add.2, i32* %idx.2, align 4
%iv.next = add nuw nsw i64 %iv, 1
%exitcond = icmp eq i64 %iv.next, 2000
br i1 %exitcond, label %exit, label %for
exit:
ret void
}
; Some kinds of reductions are not detected by IVDescriptors. If we have a
; cycle, we cannot sink it.
define void @cannot_sink_reduction(i32 %x, i32* %ptr, i64 %tc) {
; CHECK-LABEL: define void @cannot_sink_reduction(
; CHECK-NEXT: entry:
; CHECK-NEXT: br label %preheader
; CHECK-LABEL: preheader: ; preds = %entry
; CHECK: br label %for
; CHECK-LABEL: for: ; preds = %for, %preheader
; CHECK br i1 %exitcond, label %exit, label %for
; CHECK-LABEL: exit: ; preds = %for
; CHECK-NET: ret void
;
entry:
br label %preheader
preheader:
%idx.phi.trans = getelementptr inbounds [257 x i32], [257 x i32]* @p, i64 0, i64 1
%.pre = load i32, i32* %idx.phi.trans, align 4
br label %for
for:
%pre.phi = phi i32 [ %.pre, %preheader ], [ %d, %for ]
%iv = phi i64 [ 1, %preheader ], [ %iv.next, %for ]
%d = sdiv i32 %pre.phi, %x
%idx.1 = getelementptr inbounds [257 x i32], [257 x i32]* @p, i64 0, i64 %iv
%pre.next = load i32, i32* %idx.1, align 4
%add.2 = add i32 %x, %pre.next
%idx.2 = getelementptr inbounds [257 x i32], [257 x i32]* @q, i64 0, i64 %iv
store i32 %add.2, i32* %idx.2, align 4
%iv.next = add nuw nsw i64 %iv, 1
%exitcond = icmp eq i64 %iv.next, 2000
br i1 %exitcond, label %exit, label %for
exit:
ret void
}
Reference in New Issue View Git Blame Copy Permalink