
Introduce an Address type to bundle a pointer value with an alignment. Introduce APIs on CGBuilderTy to work with Address values. Change core APIs on CGF/CGM to traffic in Address where appropriate. Require alignments to be non-zero. Update a ton of code to compute and propagate alignment information. As part of this, I've promoted CGBuiltin's EmitPointerWithAlignment helper function to CGF and made use of it in a number of places in the expression emitter. The end result is that we should now be significantly more correct when performing operations on objects that are locally known to be under-aligned. Since alignment is not reliably tracked in the type system, there are inherent limits to this, but at least we are no longer confused by standard operations like derived-to-base conversions and array-to-pointer decay. I've also fixed a large number of bugs where we were applying the complete-object alignment to a pointer instead of the non-virtual alignment, although most of these were hidden by the very conservative approach we took with member alignment. Also, because IRGen now reliably asserts on zero alignments, we should no longer be subject to an absurd but frustrating recurring bug where an incomplete type would report a zero alignment and then we'd naively do a alignmentAtOffset on it and emit code using an alignment equal to the largest power-of-two factor of the offset. We should also now be emitting much more aggressive alignment attributes in the presence of over-alignment. In particular, field access now uses alignmentAtOffset instead of min. Several times in this patch, I had to change the existing code-generation pattern in order to more effectively use the Address APIs. For the most part, this seems to be a strict improvement, like doing pointer arithmetic with GEPs instead of ptrtoint. That said, I've tried very hard to not change semantics, but it is likely that I've failed in a few places, for which I apologize. ABIArgInfo now always carries the assumed alignment of indirect and indirect byval arguments. In order to cut down on what was already a dauntingly large patch, I changed the code to never set align attributes in the IR on non-byval indirect arguments. That is, we still generate code which assumes that indirect arguments have the given alignment, but we don't express this information to the backend except where it's semantically required (i.e. on byvals). This is likely a minor regression for those targets that did provide this information, but it'll be trivial to add it back in a later patch. I partially punted on applying this work to CGBuiltin. Please do not add more uses of the CreateDefaultAligned{Load,Store} APIs; they will be going away eventually. llvm-svn: 246985
1218 lines
45 KiB
C++
1218 lines
45 KiB
C++
//===--- CGCleanup.cpp - Bookkeeping and code emission for cleanups -------===//
|
|
//
|
|
// The LLVM Compiler Infrastructure
|
|
//
|
|
// This file is distributed under the University of Illinois Open Source
|
|
// License. See LICENSE.TXT for details.
|
|
//
|
|
//===----------------------------------------------------------------------===//
|
|
//
|
|
// This file contains code dealing with the IR generation for cleanups
|
|
// and related information.
|
|
//
|
|
// A "cleanup" is a piece of code which needs to be executed whenever
|
|
// control transfers out of a particular scope. This can be
|
|
// conditionalized to occur only on exceptional control flow, only on
|
|
// normal control flow, or both.
|
|
//
|
|
//===----------------------------------------------------------------------===//
|
|
|
|
#include "CGCleanup.h"
|
|
#include "CodeGenFunction.h"
|
|
|
|
using namespace clang;
|
|
using namespace CodeGen;
|
|
|
|
bool DominatingValue<RValue>::saved_type::needsSaving(RValue rv) {
|
|
if (rv.isScalar())
|
|
return DominatingLLVMValue::needsSaving(rv.getScalarVal());
|
|
if (rv.isAggregate())
|
|
return DominatingLLVMValue::needsSaving(rv.getAggregatePointer());
|
|
return true;
|
|
}
|
|
|
|
DominatingValue<RValue>::saved_type
|
|
DominatingValue<RValue>::saved_type::save(CodeGenFunction &CGF, RValue rv) {
|
|
if (rv.isScalar()) {
|
|
llvm::Value *V = rv.getScalarVal();
|
|
|
|
// These automatically dominate and don't need to be saved.
|
|
if (!DominatingLLVMValue::needsSaving(V))
|
|
return saved_type(V, ScalarLiteral);
|
|
|
|
// Everything else needs an alloca.
|
|
Address addr =
|
|
CGF.CreateDefaultAlignTempAlloca(V->getType(), "saved-rvalue");
|
|
CGF.Builder.CreateStore(V, addr);
|
|
return saved_type(addr.getPointer(), ScalarAddress);
|
|
}
|
|
|
|
if (rv.isComplex()) {
|
|
CodeGenFunction::ComplexPairTy V = rv.getComplexVal();
|
|
llvm::Type *ComplexTy =
|
|
llvm::StructType::get(V.first->getType(), V.second->getType(),
|
|
(void*) nullptr);
|
|
Address addr = CGF.CreateDefaultAlignTempAlloca(ComplexTy, "saved-complex");
|
|
CGF.Builder.CreateStore(V.first,
|
|
CGF.Builder.CreateStructGEP(addr, 0, CharUnits()));
|
|
CharUnits offset = CharUnits::fromQuantity(
|
|
CGF.CGM.getDataLayout().getTypeAllocSize(V.first->getType()));
|
|
CGF.Builder.CreateStore(V.second,
|
|
CGF.Builder.CreateStructGEP(addr, 1, offset));
|
|
return saved_type(addr.getPointer(), ComplexAddress);
|
|
}
|
|
|
|
assert(rv.isAggregate());
|
|
Address V = rv.getAggregateAddress(); // TODO: volatile?
|
|
if (!DominatingLLVMValue::needsSaving(V.getPointer()))
|
|
return saved_type(V.getPointer(), AggregateLiteral,
|
|
V.getAlignment().getQuantity());
|
|
|
|
Address addr =
|
|
CGF.CreateTempAlloca(V.getType(), CGF.getPointerAlign(), "saved-rvalue");
|
|
CGF.Builder.CreateStore(V.getPointer(), addr);
|
|
return saved_type(addr.getPointer(), AggregateAddress,
|
|
V.getAlignment().getQuantity());
|
|
}
|
|
|
|
/// Given a saved r-value produced by SaveRValue, perform the code
|
|
/// necessary to restore it to usability at the current insertion
|
|
/// point.
|
|
RValue DominatingValue<RValue>::saved_type::restore(CodeGenFunction &CGF) {
|
|
auto getSavingAddress = [&](llvm::Value *value) {
|
|
auto alignment = cast<llvm::AllocaInst>(value)->getAlignment();
|
|
return Address(value, CharUnits::fromQuantity(alignment));
|
|
};
|
|
switch (K) {
|
|
case ScalarLiteral:
|
|
return RValue::get(Value);
|
|
case ScalarAddress:
|
|
return RValue::get(CGF.Builder.CreateLoad(getSavingAddress(Value)));
|
|
case AggregateLiteral:
|
|
return RValue::getAggregate(Address(Value, CharUnits::fromQuantity(Align)));
|
|
case AggregateAddress: {
|
|
auto addr = CGF.Builder.CreateLoad(getSavingAddress(Value));
|
|
return RValue::getAggregate(Address(addr, CharUnits::fromQuantity(Align)));
|
|
}
|
|
case ComplexAddress: {
|
|
Address address = getSavingAddress(Value);
|
|
llvm::Value *real = CGF.Builder.CreateLoad(
|
|
CGF.Builder.CreateStructGEP(address, 0, CharUnits()));
|
|
CharUnits offset = CharUnits::fromQuantity(
|
|
CGF.CGM.getDataLayout().getTypeAllocSize(real->getType()));
|
|
llvm::Value *imag = CGF.Builder.CreateLoad(
|
|
CGF.Builder.CreateStructGEP(address, 1, offset));
|
|
return RValue::getComplex(real, imag);
|
|
}
|
|
}
|
|
|
|
llvm_unreachable("bad saved r-value kind");
|
|
}
|
|
|
|
/// Push an entry of the given size onto this protected-scope stack.
|
|
char *EHScopeStack::allocate(size_t Size) {
|
|
Size = llvm::RoundUpToAlignment(Size, ScopeStackAlignment);
|
|
if (!StartOfBuffer) {
|
|
unsigned Capacity = 1024;
|
|
while (Capacity < Size) Capacity *= 2;
|
|
StartOfBuffer = new char[Capacity];
|
|
StartOfData = EndOfBuffer = StartOfBuffer + Capacity;
|
|
} else if (static_cast<size_t>(StartOfData - StartOfBuffer) < Size) {
|
|
unsigned CurrentCapacity = EndOfBuffer - StartOfBuffer;
|
|
unsigned UsedCapacity = CurrentCapacity - (StartOfData - StartOfBuffer);
|
|
|
|
unsigned NewCapacity = CurrentCapacity;
|
|
do {
|
|
NewCapacity *= 2;
|
|
} while (NewCapacity < UsedCapacity + Size);
|
|
|
|
char *NewStartOfBuffer = new char[NewCapacity];
|
|
char *NewEndOfBuffer = NewStartOfBuffer + NewCapacity;
|
|
char *NewStartOfData = NewEndOfBuffer - UsedCapacity;
|
|
memcpy(NewStartOfData, StartOfData, UsedCapacity);
|
|
delete [] StartOfBuffer;
|
|
StartOfBuffer = NewStartOfBuffer;
|
|
EndOfBuffer = NewEndOfBuffer;
|
|
StartOfData = NewStartOfData;
|
|
}
|
|
|
|
assert(StartOfBuffer + Size <= StartOfData);
|
|
StartOfData -= Size;
|
|
return StartOfData;
|
|
}
|
|
|
|
void EHScopeStack::deallocate(size_t Size) {
|
|
StartOfData += llvm::RoundUpToAlignment(Size, ScopeStackAlignment);
|
|
}
|
|
|
|
bool EHScopeStack::containsOnlyLifetimeMarkers(
|
|
EHScopeStack::stable_iterator Old) const {
|
|
for (EHScopeStack::iterator it = begin(); stabilize(it) != Old; it++) {
|
|
EHCleanupScope *cleanup = dyn_cast<EHCleanupScope>(&*it);
|
|
if (!cleanup || !cleanup->isLifetimeMarker())
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
EHScopeStack::stable_iterator
|
|
EHScopeStack::getInnermostActiveNormalCleanup() const {
|
|
for (stable_iterator si = getInnermostNormalCleanup(), se = stable_end();
|
|
si != se; ) {
|
|
EHCleanupScope &cleanup = cast<EHCleanupScope>(*find(si));
|
|
if (cleanup.isActive()) return si;
|
|
si = cleanup.getEnclosingNormalCleanup();
|
|
}
|
|
return stable_end();
|
|
}
|
|
|
|
EHScopeStack::stable_iterator EHScopeStack::getInnermostActiveEHScope() const {
|
|
for (stable_iterator si = getInnermostEHScope(), se = stable_end();
|
|
si != se; ) {
|
|
// Skip over inactive cleanups.
|
|
EHCleanupScope *cleanup = dyn_cast<EHCleanupScope>(&*find(si));
|
|
if (cleanup && !cleanup->isActive()) {
|
|
si = cleanup->getEnclosingEHScope();
|
|
continue;
|
|
}
|
|
|
|
// All other scopes are always active.
|
|
return si;
|
|
}
|
|
|
|
return stable_end();
|
|
}
|
|
|
|
|
|
void *EHScopeStack::pushCleanup(CleanupKind Kind, size_t Size) {
|
|
char *Buffer = allocate(EHCleanupScope::getSizeForCleanupSize(Size));
|
|
bool IsNormalCleanup = Kind & NormalCleanup;
|
|
bool IsEHCleanup = Kind & EHCleanup;
|
|
bool IsActive = !(Kind & InactiveCleanup);
|
|
EHCleanupScope *Scope =
|
|
new (Buffer) EHCleanupScope(IsNormalCleanup,
|
|
IsEHCleanup,
|
|
IsActive,
|
|
Size,
|
|
BranchFixups.size(),
|
|
InnermostNormalCleanup,
|
|
InnermostEHScope);
|
|
if (IsNormalCleanup)
|
|
InnermostNormalCleanup = stable_begin();
|
|
if (IsEHCleanup)
|
|
InnermostEHScope = stable_begin();
|
|
|
|
return Scope->getCleanupBuffer();
|
|
}
|
|
|
|
void EHScopeStack::popCleanup() {
|
|
assert(!empty() && "popping exception stack when not empty");
|
|
|
|
assert(isa<EHCleanupScope>(*begin()));
|
|
EHCleanupScope &Cleanup = cast<EHCleanupScope>(*begin());
|
|
InnermostNormalCleanup = Cleanup.getEnclosingNormalCleanup();
|
|
InnermostEHScope = Cleanup.getEnclosingEHScope();
|
|
deallocate(Cleanup.getAllocatedSize());
|
|
|
|
// Destroy the cleanup.
|
|
Cleanup.Destroy();
|
|
|
|
// Check whether we can shrink the branch-fixups stack.
|
|
if (!BranchFixups.empty()) {
|
|
// If we no longer have any normal cleanups, all the fixups are
|
|
// complete.
|
|
if (!hasNormalCleanups())
|
|
BranchFixups.clear();
|
|
|
|
// Otherwise we can still trim out unnecessary nulls.
|
|
else
|
|
popNullFixups();
|
|
}
|
|
}
|
|
|
|
EHFilterScope *EHScopeStack::pushFilter(unsigned numFilters) {
|
|
assert(getInnermostEHScope() == stable_end());
|
|
char *buffer = allocate(EHFilterScope::getSizeForNumFilters(numFilters));
|
|
EHFilterScope *filter = new (buffer) EHFilterScope(numFilters);
|
|
InnermostEHScope = stable_begin();
|
|
return filter;
|
|
}
|
|
|
|
void EHScopeStack::popFilter() {
|
|
assert(!empty() && "popping exception stack when not empty");
|
|
|
|
EHFilterScope &filter = cast<EHFilterScope>(*begin());
|
|
deallocate(EHFilterScope::getSizeForNumFilters(filter.getNumFilters()));
|
|
|
|
InnermostEHScope = filter.getEnclosingEHScope();
|
|
}
|
|
|
|
EHCatchScope *EHScopeStack::pushCatch(unsigned numHandlers) {
|
|
char *buffer = allocate(EHCatchScope::getSizeForNumHandlers(numHandlers));
|
|
EHCatchScope *scope =
|
|
new (buffer) EHCatchScope(numHandlers, InnermostEHScope);
|
|
InnermostEHScope = stable_begin();
|
|
return scope;
|
|
}
|
|
|
|
void EHScopeStack::pushTerminate() {
|
|
char *Buffer = allocate(EHTerminateScope::getSize());
|
|
new (Buffer) EHTerminateScope(InnermostEHScope);
|
|
InnermostEHScope = stable_begin();
|
|
}
|
|
|
|
void EHScopeStack::pushCatchEnd(llvm::BasicBlock *CatchEndBlockBB) {
|
|
char *Buffer = allocate(EHCatchEndScope::getSize());
|
|
auto *CES = new (Buffer) EHCatchEndScope(InnermostEHScope);
|
|
CES->setCachedEHDispatchBlock(CatchEndBlockBB);
|
|
InnermostEHScope = stable_begin();
|
|
}
|
|
|
|
/// Remove any 'null' fixups on the stack. However, we can't pop more
|
|
/// fixups than the fixup depth on the innermost normal cleanup, or
|
|
/// else fixups that we try to add to that cleanup will end up in the
|
|
/// wrong place. We *could* try to shrink fixup depths, but that's
|
|
/// actually a lot of work for little benefit.
|
|
void EHScopeStack::popNullFixups() {
|
|
// We expect this to only be called when there's still an innermost
|
|
// normal cleanup; otherwise there really shouldn't be any fixups.
|
|
assert(hasNormalCleanups());
|
|
|
|
EHScopeStack::iterator it = find(InnermostNormalCleanup);
|
|
unsigned MinSize = cast<EHCleanupScope>(*it).getFixupDepth();
|
|
assert(BranchFixups.size() >= MinSize && "fixup stack out of order");
|
|
|
|
while (BranchFixups.size() > MinSize &&
|
|
BranchFixups.back().Destination == nullptr)
|
|
BranchFixups.pop_back();
|
|
}
|
|
|
|
void CodeGenFunction::initFullExprCleanup() {
|
|
// Create a variable to decide whether the cleanup needs to be run.
|
|
Address active = CreateTempAlloca(Builder.getInt1Ty(), CharUnits::One(),
|
|
"cleanup.cond");
|
|
|
|
// Initialize it to false at a site that's guaranteed to be run
|
|
// before each evaluation.
|
|
setBeforeOutermostConditional(Builder.getFalse(), active);
|
|
|
|
// Initialize it to true at the current location.
|
|
Builder.CreateStore(Builder.getTrue(), active);
|
|
|
|
// Set that as the active flag in the cleanup.
|
|
EHCleanupScope &cleanup = cast<EHCleanupScope>(*EHStack.begin());
|
|
assert(!cleanup.hasActiveFlag() && "cleanup already has active flag?");
|
|
cleanup.setActiveFlag(active);
|
|
|
|
if (cleanup.isNormalCleanup()) cleanup.setTestFlagInNormalCleanup();
|
|
if (cleanup.isEHCleanup()) cleanup.setTestFlagInEHCleanup();
|
|
}
|
|
|
|
void EHScopeStack::Cleanup::anchor() {}
|
|
|
|
static void createStoreInstBefore(llvm::Value *value, Address addr,
|
|
llvm::Instruction *beforeInst) {
|
|
auto store = new llvm::StoreInst(value, addr.getPointer(), beforeInst);
|
|
store->setAlignment(addr.getAlignment().getQuantity());
|
|
}
|
|
|
|
static llvm::LoadInst *createLoadInstBefore(Address addr, const Twine &name,
|
|
llvm::Instruction *beforeInst) {
|
|
auto load = new llvm::LoadInst(addr.getPointer(), name, beforeInst);
|
|
load->setAlignment(addr.getAlignment().getQuantity());
|
|
return load;
|
|
}
|
|
|
|
/// All the branch fixups on the EH stack have propagated out past the
|
|
/// outermost normal cleanup; resolve them all by adding cases to the
|
|
/// given switch instruction.
|
|
static void ResolveAllBranchFixups(CodeGenFunction &CGF,
|
|
llvm::SwitchInst *Switch,
|
|
llvm::BasicBlock *CleanupEntry) {
|
|
llvm::SmallPtrSet<llvm::BasicBlock*, 4> CasesAdded;
|
|
|
|
for (unsigned I = 0, E = CGF.EHStack.getNumBranchFixups(); I != E; ++I) {
|
|
// Skip this fixup if its destination isn't set.
|
|
BranchFixup &Fixup = CGF.EHStack.getBranchFixup(I);
|
|
if (Fixup.Destination == nullptr) continue;
|
|
|
|
// If there isn't an OptimisticBranchBlock, then InitialBranch is
|
|
// still pointing directly to its destination; forward it to the
|
|
// appropriate cleanup entry. This is required in the specific
|
|
// case of
|
|
// { std::string s; goto lbl; }
|
|
// lbl:
|
|
// i.e. where there's an unresolved fixup inside a single cleanup
|
|
// entry which we're currently popping.
|
|
if (Fixup.OptimisticBranchBlock == nullptr) {
|
|
createStoreInstBefore(CGF.Builder.getInt32(Fixup.DestinationIndex),
|
|
CGF.getNormalCleanupDestSlot(),
|
|
Fixup.InitialBranch);
|
|
Fixup.InitialBranch->setSuccessor(0, CleanupEntry);
|
|
}
|
|
|
|
// Don't add this case to the switch statement twice.
|
|
if (!CasesAdded.insert(Fixup.Destination).second)
|
|
continue;
|
|
|
|
Switch->addCase(CGF.Builder.getInt32(Fixup.DestinationIndex),
|
|
Fixup.Destination);
|
|
}
|
|
|
|
CGF.EHStack.clearFixups();
|
|
}
|
|
|
|
/// Transitions the terminator of the given exit-block of a cleanup to
|
|
/// be a cleanup switch.
|
|
static llvm::SwitchInst *TransitionToCleanupSwitch(CodeGenFunction &CGF,
|
|
llvm::BasicBlock *Block) {
|
|
// If it's a branch, turn it into a switch whose default
|
|
// destination is its original target.
|
|
llvm::TerminatorInst *Term = Block->getTerminator();
|
|
assert(Term && "can't transition block without terminator");
|
|
|
|
if (llvm::BranchInst *Br = dyn_cast<llvm::BranchInst>(Term)) {
|
|
assert(Br->isUnconditional());
|
|
auto Load = createLoadInstBefore(CGF.getNormalCleanupDestSlot(),
|
|
"cleanup.dest", Term);
|
|
llvm::SwitchInst *Switch =
|
|
llvm::SwitchInst::Create(Load, Br->getSuccessor(0), 4, Block);
|
|
Br->eraseFromParent();
|
|
return Switch;
|
|
} else {
|
|
return cast<llvm::SwitchInst>(Term);
|
|
}
|
|
}
|
|
|
|
void CodeGenFunction::ResolveBranchFixups(llvm::BasicBlock *Block) {
|
|
assert(Block && "resolving a null target block");
|
|
if (!EHStack.getNumBranchFixups()) return;
|
|
|
|
assert(EHStack.hasNormalCleanups() &&
|
|
"branch fixups exist with no normal cleanups on stack");
|
|
|
|
llvm::SmallPtrSet<llvm::BasicBlock*, 4> ModifiedOptimisticBlocks;
|
|
bool ResolvedAny = false;
|
|
|
|
for (unsigned I = 0, E = EHStack.getNumBranchFixups(); I != E; ++I) {
|
|
// Skip this fixup if its destination doesn't match.
|
|
BranchFixup &Fixup = EHStack.getBranchFixup(I);
|
|
if (Fixup.Destination != Block) continue;
|
|
|
|
Fixup.Destination = nullptr;
|
|
ResolvedAny = true;
|
|
|
|
// If it doesn't have an optimistic branch block, LatestBranch is
|
|
// already pointing to the right place.
|
|
llvm::BasicBlock *BranchBB = Fixup.OptimisticBranchBlock;
|
|
if (!BranchBB)
|
|
continue;
|
|
|
|
// Don't process the same optimistic branch block twice.
|
|
if (!ModifiedOptimisticBlocks.insert(BranchBB).second)
|
|
continue;
|
|
|
|
llvm::SwitchInst *Switch = TransitionToCleanupSwitch(*this, BranchBB);
|
|
|
|
// Add a case to the switch.
|
|
Switch->addCase(Builder.getInt32(Fixup.DestinationIndex), Block);
|
|
}
|
|
|
|
if (ResolvedAny)
|
|
EHStack.popNullFixups();
|
|
}
|
|
|
|
/// Pops cleanup blocks until the given savepoint is reached.
|
|
void CodeGenFunction::PopCleanupBlocks(EHScopeStack::stable_iterator Old) {
|
|
assert(Old.isValid());
|
|
|
|
while (EHStack.stable_begin() != Old) {
|
|
EHCleanupScope &Scope = cast<EHCleanupScope>(*EHStack.begin());
|
|
|
|
// As long as Old strictly encloses the scope's enclosing normal
|
|
// cleanup, we're going to emit another normal cleanup which
|
|
// fallthrough can propagate through.
|
|
bool FallThroughIsBranchThrough =
|
|
Old.strictlyEncloses(Scope.getEnclosingNormalCleanup());
|
|
|
|
PopCleanupBlock(FallThroughIsBranchThrough);
|
|
}
|
|
}
|
|
|
|
/// Pops cleanup blocks until the given savepoint is reached, then add the
|
|
/// cleanups from the given savepoint in the lifetime-extended cleanups stack.
|
|
void
|
|
CodeGenFunction::PopCleanupBlocks(EHScopeStack::stable_iterator Old,
|
|
size_t OldLifetimeExtendedSize) {
|
|
PopCleanupBlocks(Old);
|
|
|
|
// Move our deferred cleanups onto the EH stack.
|
|
for (size_t I = OldLifetimeExtendedSize,
|
|
E = LifetimeExtendedCleanupStack.size(); I != E; /**/) {
|
|
// Alignment should be guaranteed by the vptrs in the individual cleanups.
|
|
assert((I % llvm::alignOf<LifetimeExtendedCleanupHeader>() == 0) &&
|
|
"misaligned cleanup stack entry");
|
|
|
|
LifetimeExtendedCleanupHeader &Header =
|
|
reinterpret_cast<LifetimeExtendedCleanupHeader&>(
|
|
LifetimeExtendedCleanupStack[I]);
|
|
I += sizeof(Header);
|
|
|
|
EHStack.pushCopyOfCleanup(Header.getKind(),
|
|
&LifetimeExtendedCleanupStack[I],
|
|
Header.getSize());
|
|
I += Header.getSize();
|
|
}
|
|
LifetimeExtendedCleanupStack.resize(OldLifetimeExtendedSize);
|
|
}
|
|
|
|
static llvm::BasicBlock *CreateNormalEntry(CodeGenFunction &CGF,
|
|
EHCleanupScope &Scope) {
|
|
assert(Scope.isNormalCleanup());
|
|
llvm::BasicBlock *Entry = Scope.getNormalBlock();
|
|
if (!Entry) {
|
|
Entry = CGF.createBasicBlock("cleanup");
|
|
Scope.setNormalBlock(Entry);
|
|
}
|
|
return Entry;
|
|
}
|
|
|
|
/// Attempts to reduce a cleanup's entry block to a fallthrough. This
|
|
/// is basically llvm::MergeBlockIntoPredecessor, except
|
|
/// simplified/optimized for the tighter constraints on cleanup blocks.
|
|
///
|
|
/// Returns the new block, whatever it is.
|
|
static llvm::BasicBlock *SimplifyCleanupEntry(CodeGenFunction &CGF,
|
|
llvm::BasicBlock *Entry) {
|
|
llvm::BasicBlock *Pred = Entry->getSinglePredecessor();
|
|
if (!Pred) return Entry;
|
|
|
|
llvm::BranchInst *Br = dyn_cast<llvm::BranchInst>(Pred->getTerminator());
|
|
if (!Br || Br->isConditional()) return Entry;
|
|
assert(Br->getSuccessor(0) == Entry);
|
|
|
|
// If we were previously inserting at the end of the cleanup entry
|
|
// block, we'll need to continue inserting at the end of the
|
|
// predecessor.
|
|
bool WasInsertBlock = CGF.Builder.GetInsertBlock() == Entry;
|
|
assert(!WasInsertBlock || CGF.Builder.GetInsertPoint() == Entry->end());
|
|
|
|
// Kill the branch.
|
|
Br->eraseFromParent();
|
|
|
|
// Replace all uses of the entry with the predecessor, in case there
|
|
// are phis in the cleanup.
|
|
Entry->replaceAllUsesWith(Pred);
|
|
|
|
// Merge the blocks.
|
|
Pred->getInstList().splice(Pred->end(), Entry->getInstList());
|
|
|
|
// Kill the entry block.
|
|
Entry->eraseFromParent();
|
|
|
|
if (WasInsertBlock)
|
|
CGF.Builder.SetInsertPoint(Pred);
|
|
|
|
return Pred;
|
|
}
|
|
|
|
static void EmitCleanup(CodeGenFunction &CGF,
|
|
EHScopeStack::Cleanup *Fn,
|
|
EHScopeStack::Cleanup::Flags flags,
|
|
Address ActiveFlag) {
|
|
// Itanium EH cleanups occur within a terminate scope. Microsoft SEH doesn't
|
|
// have this behavior, and the Microsoft C++ runtime will call terminate for
|
|
// us if the cleanup throws.
|
|
bool PushedTerminate = false;
|
|
if (flags.isForEHCleanup() && !CGF.getTarget().getCXXABI().isMicrosoft()) {
|
|
CGF.EHStack.pushTerminate();
|
|
PushedTerminate = true;
|
|
}
|
|
|
|
// If there's an active flag, load it and skip the cleanup if it's
|
|
// false.
|
|
llvm::BasicBlock *ContBB = nullptr;
|
|
if (ActiveFlag.isValid()) {
|
|
ContBB = CGF.createBasicBlock("cleanup.done");
|
|
llvm::BasicBlock *CleanupBB = CGF.createBasicBlock("cleanup.action");
|
|
llvm::Value *IsActive
|
|
= CGF.Builder.CreateLoad(ActiveFlag, "cleanup.is_active");
|
|
CGF.Builder.CreateCondBr(IsActive, CleanupBB, ContBB);
|
|
CGF.EmitBlock(CleanupBB);
|
|
}
|
|
|
|
// Ask the cleanup to emit itself.
|
|
Fn->Emit(CGF, flags);
|
|
assert(CGF.HaveInsertPoint() && "cleanup ended with no insertion point?");
|
|
|
|
// Emit the continuation block if there was an active flag.
|
|
if (ActiveFlag.isValid())
|
|
CGF.EmitBlock(ContBB);
|
|
|
|
// Leave the terminate scope.
|
|
if (PushedTerminate)
|
|
CGF.EHStack.popTerminate();
|
|
}
|
|
|
|
static void ForwardPrebranchedFallthrough(llvm::BasicBlock *Exit,
|
|
llvm::BasicBlock *From,
|
|
llvm::BasicBlock *To) {
|
|
// Exit is the exit block of a cleanup, so it always terminates in
|
|
// an unconditional branch or a switch.
|
|
llvm::TerminatorInst *Term = Exit->getTerminator();
|
|
|
|
if (llvm::BranchInst *Br = dyn_cast<llvm::BranchInst>(Term)) {
|
|
assert(Br->isUnconditional() && Br->getSuccessor(0) == From);
|
|
Br->setSuccessor(0, To);
|
|
} else {
|
|
llvm::SwitchInst *Switch = cast<llvm::SwitchInst>(Term);
|
|
for (unsigned I = 0, E = Switch->getNumSuccessors(); I != E; ++I)
|
|
if (Switch->getSuccessor(I) == From)
|
|
Switch->setSuccessor(I, To);
|
|
}
|
|
}
|
|
|
|
/// We don't need a normal entry block for the given cleanup.
|
|
/// Optimistic fixup branches can cause these blocks to come into
|
|
/// existence anyway; if so, destroy it.
|
|
///
|
|
/// The validity of this transformation is very much specific to the
|
|
/// exact ways in which we form branches to cleanup entries.
|
|
static void destroyOptimisticNormalEntry(CodeGenFunction &CGF,
|
|
EHCleanupScope &scope) {
|
|
llvm::BasicBlock *entry = scope.getNormalBlock();
|
|
if (!entry) return;
|
|
|
|
// Replace all the uses with unreachable.
|
|
llvm::BasicBlock *unreachableBB = CGF.getUnreachableBlock();
|
|
for (llvm::BasicBlock::use_iterator
|
|
i = entry->use_begin(), e = entry->use_end(); i != e; ) {
|
|
llvm::Use &use = *i;
|
|
++i;
|
|
|
|
use.set(unreachableBB);
|
|
|
|
// The only uses should be fixup switches.
|
|
llvm::SwitchInst *si = cast<llvm::SwitchInst>(use.getUser());
|
|
if (si->getNumCases() == 1 && si->getDefaultDest() == unreachableBB) {
|
|
// Replace the switch with a branch.
|
|
llvm::BranchInst::Create(si->case_begin().getCaseSuccessor(), si);
|
|
|
|
// The switch operand is a load from the cleanup-dest alloca.
|
|
llvm::LoadInst *condition = cast<llvm::LoadInst>(si->getCondition());
|
|
|
|
// Destroy the switch.
|
|
si->eraseFromParent();
|
|
|
|
// Destroy the load.
|
|
assert(condition->getOperand(0) == CGF.NormalCleanupDest);
|
|
assert(condition->use_empty());
|
|
condition->eraseFromParent();
|
|
}
|
|
}
|
|
|
|
assert(entry->use_empty());
|
|
delete entry;
|
|
}
|
|
|
|
/// Pops a cleanup block. If the block includes a normal cleanup, the
|
|
/// current insertion point is threaded through the cleanup, as are
|
|
/// any branch fixups on the cleanup.
|
|
void CodeGenFunction::PopCleanupBlock(bool FallthroughIsBranchThrough) {
|
|
assert(!EHStack.empty() && "cleanup stack is empty!");
|
|
assert(isa<EHCleanupScope>(*EHStack.begin()) && "top not a cleanup!");
|
|
EHCleanupScope &Scope = cast<EHCleanupScope>(*EHStack.begin());
|
|
assert(Scope.getFixupDepth() <= EHStack.getNumBranchFixups());
|
|
|
|
// Remember activation information.
|
|
bool IsActive = Scope.isActive();
|
|
Address NormalActiveFlag =
|
|
Scope.shouldTestFlagInNormalCleanup() ? Scope.getActiveFlag()
|
|
: Address::invalid();
|
|
Address EHActiveFlag =
|
|
Scope.shouldTestFlagInEHCleanup() ? Scope.getActiveFlag()
|
|
: Address::invalid();
|
|
|
|
// Check whether we need an EH cleanup. This is only true if we've
|
|
// generated a lazy EH cleanup block.
|
|
llvm::BasicBlock *EHEntry = Scope.getCachedEHDispatchBlock();
|
|
assert(Scope.hasEHBranches() == (EHEntry != nullptr));
|
|
bool RequiresEHCleanup = (EHEntry != nullptr);
|
|
EHScopeStack::stable_iterator EHParent = Scope.getEnclosingEHScope();
|
|
|
|
// Check the three conditions which might require a normal cleanup:
|
|
|
|
// - whether there are branch fix-ups through this cleanup
|
|
unsigned FixupDepth = Scope.getFixupDepth();
|
|
bool HasFixups = EHStack.getNumBranchFixups() != FixupDepth;
|
|
|
|
// - whether there are branch-throughs or branch-afters
|
|
bool HasExistingBranches = Scope.hasBranches();
|
|
|
|
// - whether there's a fallthrough
|
|
llvm::BasicBlock *FallthroughSource = Builder.GetInsertBlock();
|
|
bool HasFallthrough = (FallthroughSource != nullptr && IsActive);
|
|
|
|
// Branch-through fall-throughs leave the insertion point set to the
|
|
// end of the last cleanup, which points to the current scope. The
|
|
// rest of IR gen doesn't need to worry about this; it only happens
|
|
// during the execution of PopCleanupBlocks().
|
|
bool HasPrebranchedFallthrough =
|
|
(FallthroughSource && FallthroughSource->getTerminator());
|
|
|
|
// If this is a normal cleanup, then having a prebranched
|
|
// fallthrough implies that the fallthrough source unconditionally
|
|
// jumps here.
|
|
assert(!Scope.isNormalCleanup() || !HasPrebranchedFallthrough ||
|
|
(Scope.getNormalBlock() &&
|
|
FallthroughSource->getTerminator()->getSuccessor(0)
|
|
== Scope.getNormalBlock()));
|
|
|
|
bool RequiresNormalCleanup = false;
|
|
if (Scope.isNormalCleanup() &&
|
|
(HasFixups || HasExistingBranches || HasFallthrough)) {
|
|
RequiresNormalCleanup = true;
|
|
}
|
|
|
|
// If we have a prebranched fallthrough into an inactive normal
|
|
// cleanup, rewrite it so that it leads to the appropriate place.
|
|
if (Scope.isNormalCleanup() && HasPrebranchedFallthrough && !IsActive) {
|
|
llvm::BasicBlock *prebranchDest;
|
|
|
|
// If the prebranch is semantically branching through the next
|
|
// cleanup, just forward it to the next block, leaving the
|
|
// insertion point in the prebranched block.
|
|
if (FallthroughIsBranchThrough) {
|
|
EHScope &enclosing = *EHStack.find(Scope.getEnclosingNormalCleanup());
|
|
prebranchDest = CreateNormalEntry(*this, cast<EHCleanupScope>(enclosing));
|
|
|
|
// Otherwise, we need to make a new block. If the normal cleanup
|
|
// isn't being used at all, we could actually reuse the normal
|
|
// entry block, but this is simpler, and it avoids conflicts with
|
|
// dead optimistic fixup branches.
|
|
} else {
|
|
prebranchDest = createBasicBlock("forwarded-prebranch");
|
|
EmitBlock(prebranchDest);
|
|
}
|
|
|
|
llvm::BasicBlock *normalEntry = Scope.getNormalBlock();
|
|
assert(normalEntry && !normalEntry->use_empty());
|
|
|
|
ForwardPrebranchedFallthrough(FallthroughSource,
|
|
normalEntry, prebranchDest);
|
|
}
|
|
|
|
// If we don't need the cleanup at all, we're done.
|
|
if (!RequiresNormalCleanup && !RequiresEHCleanup) {
|
|
destroyOptimisticNormalEntry(*this, Scope);
|
|
EHStack.popCleanup(); // safe because there are no fixups
|
|
assert(EHStack.getNumBranchFixups() == 0 ||
|
|
EHStack.hasNormalCleanups());
|
|
return;
|
|
}
|
|
|
|
// Copy the cleanup emission data out. Note that SmallVector
|
|
// guarantees maximal alignment for its buffer regardless of its
|
|
// type parameter.
|
|
auto *CleanupSource = reinterpret_cast<char *>(Scope.getCleanupBuffer());
|
|
SmallVector<char, 8 * sizeof(void *)> CleanupBuffer(
|
|
CleanupSource, CleanupSource + Scope.getCleanupSize());
|
|
auto *Fn = reinterpret_cast<EHScopeStack::Cleanup *>(CleanupBuffer.data());
|
|
|
|
EHScopeStack::Cleanup::Flags cleanupFlags;
|
|
if (Scope.isNormalCleanup())
|
|
cleanupFlags.setIsNormalCleanupKind();
|
|
if (Scope.isEHCleanup())
|
|
cleanupFlags.setIsEHCleanupKind();
|
|
|
|
if (!RequiresNormalCleanup) {
|
|
destroyOptimisticNormalEntry(*this, Scope);
|
|
EHStack.popCleanup();
|
|
} else {
|
|
// If we have a fallthrough and no other need for the cleanup,
|
|
// emit it directly.
|
|
if (HasFallthrough && !HasPrebranchedFallthrough &&
|
|
!HasFixups && !HasExistingBranches) {
|
|
|
|
destroyOptimisticNormalEntry(*this, Scope);
|
|
EHStack.popCleanup();
|
|
|
|
EmitCleanup(*this, Fn, cleanupFlags, NormalActiveFlag);
|
|
|
|
// Otherwise, the best approach is to thread everything through
|
|
// the cleanup block and then try to clean up after ourselves.
|
|
} else {
|
|
// Force the entry block to exist.
|
|
llvm::BasicBlock *NormalEntry = CreateNormalEntry(*this, Scope);
|
|
|
|
// I. Set up the fallthrough edge in.
|
|
|
|
CGBuilderTy::InsertPoint savedInactiveFallthroughIP;
|
|
|
|
// If there's a fallthrough, we need to store the cleanup
|
|
// destination index. For fall-throughs this is always zero.
|
|
if (HasFallthrough) {
|
|
if (!HasPrebranchedFallthrough)
|
|
Builder.CreateStore(Builder.getInt32(0), getNormalCleanupDestSlot());
|
|
|
|
// Otherwise, save and clear the IP if we don't have fallthrough
|
|
// because the cleanup is inactive.
|
|
} else if (FallthroughSource) {
|
|
assert(!IsActive && "source without fallthrough for active cleanup");
|
|
savedInactiveFallthroughIP = Builder.saveAndClearIP();
|
|
}
|
|
|
|
// II. Emit the entry block. This implicitly branches to it if
|
|
// we have fallthrough. All the fixups and existing branches
|
|
// should already be branched to it.
|
|
EmitBlock(NormalEntry);
|
|
|
|
// III. Figure out where we're going and build the cleanup
|
|
// epilogue.
|
|
|
|
bool HasEnclosingCleanups =
|
|
(Scope.getEnclosingNormalCleanup() != EHStack.stable_end());
|
|
|
|
// Compute the branch-through dest if we need it:
|
|
// - if there are branch-throughs threaded through the scope
|
|
// - if fall-through is a branch-through
|
|
// - if there are fixups that will be optimistically forwarded
|
|
// to the enclosing cleanup
|
|
llvm::BasicBlock *BranchThroughDest = nullptr;
|
|
if (Scope.hasBranchThroughs() ||
|
|
(FallthroughSource && FallthroughIsBranchThrough) ||
|
|
(HasFixups && HasEnclosingCleanups)) {
|
|
assert(HasEnclosingCleanups);
|
|
EHScope &S = *EHStack.find(Scope.getEnclosingNormalCleanup());
|
|
BranchThroughDest = CreateNormalEntry(*this, cast<EHCleanupScope>(S));
|
|
}
|
|
|
|
llvm::BasicBlock *FallthroughDest = nullptr;
|
|
SmallVector<llvm::Instruction*, 2> InstsToAppend;
|
|
|
|
// If there's exactly one branch-after and no other threads,
|
|
// we can route it without a switch.
|
|
if (!Scope.hasBranchThroughs() && !HasFixups && !HasFallthrough &&
|
|
Scope.getNumBranchAfters() == 1) {
|
|
assert(!BranchThroughDest || !IsActive);
|
|
|
|
// Clean up the possibly dead store to the cleanup dest slot.
|
|
llvm::Instruction *NormalCleanupDestSlot =
|
|
cast<llvm::Instruction>(getNormalCleanupDestSlot().getPointer());
|
|
if (NormalCleanupDestSlot->hasOneUse()) {
|
|
NormalCleanupDestSlot->user_back()->eraseFromParent();
|
|
NormalCleanupDestSlot->eraseFromParent();
|
|
NormalCleanupDest = nullptr;
|
|
}
|
|
|
|
llvm::BasicBlock *BranchAfter = Scope.getBranchAfterBlock(0);
|
|
InstsToAppend.push_back(llvm::BranchInst::Create(BranchAfter));
|
|
|
|
// Build a switch-out if we need it:
|
|
// - if there are branch-afters threaded through the scope
|
|
// - if fall-through is a branch-after
|
|
// - if there are fixups that have nowhere left to go and
|
|
// so must be immediately resolved
|
|
} else if (Scope.getNumBranchAfters() ||
|
|
(HasFallthrough && !FallthroughIsBranchThrough) ||
|
|
(HasFixups && !HasEnclosingCleanups)) {
|
|
|
|
llvm::BasicBlock *Default =
|
|
(BranchThroughDest ? BranchThroughDest : getUnreachableBlock());
|
|
|
|
// TODO: base this on the number of branch-afters and fixups
|
|
const unsigned SwitchCapacity = 10;
|
|
|
|
llvm::LoadInst *Load =
|
|
createLoadInstBefore(getNormalCleanupDestSlot(), "cleanup.dest",
|
|
nullptr);
|
|
llvm::SwitchInst *Switch =
|
|
llvm::SwitchInst::Create(Load, Default, SwitchCapacity);
|
|
|
|
InstsToAppend.push_back(Load);
|
|
InstsToAppend.push_back(Switch);
|
|
|
|
// Branch-after fallthrough.
|
|
if (FallthroughSource && !FallthroughIsBranchThrough) {
|
|
FallthroughDest = createBasicBlock("cleanup.cont");
|
|
if (HasFallthrough)
|
|
Switch->addCase(Builder.getInt32(0), FallthroughDest);
|
|
}
|
|
|
|
for (unsigned I = 0, E = Scope.getNumBranchAfters(); I != E; ++I) {
|
|
Switch->addCase(Scope.getBranchAfterIndex(I),
|
|
Scope.getBranchAfterBlock(I));
|
|
}
|
|
|
|
// If there aren't any enclosing cleanups, we can resolve all
|
|
// the fixups now.
|
|
if (HasFixups && !HasEnclosingCleanups)
|
|
ResolveAllBranchFixups(*this, Switch, NormalEntry);
|
|
} else {
|
|
// We should always have a branch-through destination in this case.
|
|
assert(BranchThroughDest);
|
|
InstsToAppend.push_back(llvm::BranchInst::Create(BranchThroughDest));
|
|
}
|
|
|
|
// IV. Pop the cleanup and emit it.
|
|
EHStack.popCleanup();
|
|
assert(EHStack.hasNormalCleanups() == HasEnclosingCleanups);
|
|
|
|
EmitCleanup(*this, Fn, cleanupFlags, NormalActiveFlag);
|
|
|
|
// Append the prepared cleanup prologue from above.
|
|
llvm::BasicBlock *NormalExit = Builder.GetInsertBlock();
|
|
for (unsigned I = 0, E = InstsToAppend.size(); I != E; ++I)
|
|
NormalExit->getInstList().push_back(InstsToAppend[I]);
|
|
|
|
// Optimistically hope that any fixups will continue falling through.
|
|
for (unsigned I = FixupDepth, E = EHStack.getNumBranchFixups();
|
|
I < E; ++I) {
|
|
BranchFixup &Fixup = EHStack.getBranchFixup(I);
|
|
if (!Fixup.Destination) continue;
|
|
if (!Fixup.OptimisticBranchBlock) {
|
|
createStoreInstBefore(Builder.getInt32(Fixup.DestinationIndex),
|
|
getNormalCleanupDestSlot(),
|
|
Fixup.InitialBranch);
|
|
Fixup.InitialBranch->setSuccessor(0, NormalEntry);
|
|
}
|
|
Fixup.OptimisticBranchBlock = NormalExit;
|
|
}
|
|
|
|
// V. Set up the fallthrough edge out.
|
|
|
|
// Case 1: a fallthrough source exists but doesn't branch to the
|
|
// cleanup because the cleanup is inactive.
|
|
if (!HasFallthrough && FallthroughSource) {
|
|
// Prebranched fallthrough was forwarded earlier.
|
|
// Non-prebranched fallthrough doesn't need to be forwarded.
|
|
// Either way, all we need to do is restore the IP we cleared before.
|
|
assert(!IsActive);
|
|
Builder.restoreIP(savedInactiveFallthroughIP);
|
|
|
|
// Case 2: a fallthrough source exists and should branch to the
|
|
// cleanup, but we're not supposed to branch through to the next
|
|
// cleanup.
|
|
} else if (HasFallthrough && FallthroughDest) {
|
|
assert(!FallthroughIsBranchThrough);
|
|
EmitBlock(FallthroughDest);
|
|
|
|
// Case 3: a fallthrough source exists and should branch to the
|
|
// cleanup and then through to the next.
|
|
} else if (HasFallthrough) {
|
|
// Everything is already set up for this.
|
|
|
|
// Case 4: no fallthrough source exists.
|
|
} else {
|
|
Builder.ClearInsertionPoint();
|
|
}
|
|
|
|
// VI. Assorted cleaning.
|
|
|
|
// Check whether we can merge NormalEntry into a single predecessor.
|
|
// This might invalidate (non-IR) pointers to NormalEntry.
|
|
llvm::BasicBlock *NewNormalEntry =
|
|
SimplifyCleanupEntry(*this, NormalEntry);
|
|
|
|
// If it did invalidate those pointers, and NormalEntry was the same
|
|
// as NormalExit, go back and patch up the fixups.
|
|
if (NewNormalEntry != NormalEntry && NormalEntry == NormalExit)
|
|
for (unsigned I = FixupDepth, E = EHStack.getNumBranchFixups();
|
|
I < E; ++I)
|
|
EHStack.getBranchFixup(I).OptimisticBranchBlock = NewNormalEntry;
|
|
}
|
|
}
|
|
|
|
assert(EHStack.hasNormalCleanups() || EHStack.getNumBranchFixups() == 0);
|
|
|
|
// Emit the EH cleanup if required.
|
|
if (RequiresEHCleanup) {
|
|
CGBuilderTy::InsertPoint SavedIP = Builder.saveAndClearIP();
|
|
|
|
EmitBlock(EHEntry);
|
|
llvm::CleanupPadInst *CPI = nullptr;
|
|
llvm::BasicBlock *NextAction = getEHDispatchBlock(EHParent);
|
|
if (CGM.getCodeGenOpts().NewMSEH &&
|
|
EHPersonality::get(*this).isMSVCPersonality())
|
|
CPI = Builder.CreateCleanupPad({});
|
|
|
|
// We only actually emit the cleanup code if the cleanup is either
|
|
// active or was used before it was deactivated.
|
|
if (EHActiveFlag.isValid() || IsActive) {
|
|
cleanupFlags.setIsForEHCleanup();
|
|
EmitCleanup(*this, Fn, cleanupFlags, EHActiveFlag);
|
|
}
|
|
|
|
if (CPI)
|
|
Builder.CreateCleanupRet(CPI, NextAction);
|
|
else
|
|
Builder.CreateBr(NextAction);
|
|
|
|
Builder.restoreIP(SavedIP);
|
|
|
|
SimplifyCleanupEntry(*this, EHEntry);
|
|
}
|
|
}
|
|
|
|
/// isObviouslyBranchWithoutCleanups - Return true if a branch to the
|
|
/// specified destination obviously has no cleanups to run. 'false' is always
|
|
/// a conservatively correct answer for this method.
|
|
bool CodeGenFunction::isObviouslyBranchWithoutCleanups(JumpDest Dest) const {
|
|
assert(Dest.getScopeDepth().encloses(EHStack.stable_begin())
|
|
&& "stale jump destination");
|
|
|
|
// Calculate the innermost active normal cleanup.
|
|
EHScopeStack::stable_iterator TopCleanup =
|
|
EHStack.getInnermostActiveNormalCleanup();
|
|
|
|
// If we're not in an active normal cleanup scope, or if the
|
|
// destination scope is within the innermost active normal cleanup
|
|
// scope, we don't need to worry about fixups.
|
|
if (TopCleanup == EHStack.stable_end() ||
|
|
TopCleanup.encloses(Dest.getScopeDepth())) // works for invalid
|
|
return true;
|
|
|
|
// Otherwise, we might need some cleanups.
|
|
return false;
|
|
}
|
|
|
|
|
|
/// Terminate the current block by emitting a branch which might leave
|
|
/// the current cleanup-protected scope. The target scope may not yet
|
|
/// be known, in which case this will require a fixup.
|
|
///
|
|
/// As a side-effect, this method clears the insertion point.
|
|
void CodeGenFunction::EmitBranchThroughCleanup(JumpDest Dest) {
|
|
assert(Dest.getScopeDepth().encloses(EHStack.stable_begin())
|
|
&& "stale jump destination");
|
|
|
|
if (!HaveInsertPoint())
|
|
return;
|
|
|
|
// Create the branch.
|
|
llvm::BranchInst *BI = Builder.CreateBr(Dest.getBlock());
|
|
|
|
// Calculate the innermost active normal cleanup.
|
|
EHScopeStack::stable_iterator
|
|
TopCleanup = EHStack.getInnermostActiveNormalCleanup();
|
|
|
|
// If we're not in an active normal cleanup scope, or if the
|
|
// destination scope is within the innermost active normal cleanup
|
|
// scope, we don't need to worry about fixups.
|
|
if (TopCleanup == EHStack.stable_end() ||
|
|
TopCleanup.encloses(Dest.getScopeDepth())) { // works for invalid
|
|
Builder.ClearInsertionPoint();
|
|
return;
|
|
}
|
|
|
|
// If we can't resolve the destination cleanup scope, just add this
|
|
// to the current cleanup scope as a branch fixup.
|
|
if (!Dest.getScopeDepth().isValid()) {
|
|
BranchFixup &Fixup = EHStack.addBranchFixup();
|
|
Fixup.Destination = Dest.getBlock();
|
|
Fixup.DestinationIndex = Dest.getDestIndex();
|
|
Fixup.InitialBranch = BI;
|
|
Fixup.OptimisticBranchBlock = nullptr;
|
|
|
|
Builder.ClearInsertionPoint();
|
|
return;
|
|
}
|
|
|
|
// Otherwise, thread through all the normal cleanups in scope.
|
|
|
|
// Store the index at the start.
|
|
llvm::ConstantInt *Index = Builder.getInt32(Dest.getDestIndex());
|
|
createStoreInstBefore(Index, getNormalCleanupDestSlot(), BI);
|
|
|
|
// Adjust BI to point to the first cleanup block.
|
|
{
|
|
EHCleanupScope &Scope =
|
|
cast<EHCleanupScope>(*EHStack.find(TopCleanup));
|
|
BI->setSuccessor(0, CreateNormalEntry(*this, Scope));
|
|
}
|
|
|
|
// Add this destination to all the scopes involved.
|
|
EHScopeStack::stable_iterator I = TopCleanup;
|
|
EHScopeStack::stable_iterator E = Dest.getScopeDepth();
|
|
if (E.strictlyEncloses(I)) {
|
|
while (true) {
|
|
EHCleanupScope &Scope = cast<EHCleanupScope>(*EHStack.find(I));
|
|
assert(Scope.isNormalCleanup());
|
|
I = Scope.getEnclosingNormalCleanup();
|
|
|
|
// If this is the last cleanup we're propagating through, tell it
|
|
// that there's a resolved jump moving through it.
|
|
if (!E.strictlyEncloses(I)) {
|
|
Scope.addBranchAfter(Index, Dest.getBlock());
|
|
break;
|
|
}
|
|
|
|
// Otherwise, tell the scope that there's a jump propoagating
|
|
// through it. If this isn't new information, all the rest of
|
|
// the work has been done before.
|
|
if (!Scope.addBranchThrough(Dest.getBlock()))
|
|
break;
|
|
}
|
|
}
|
|
|
|
Builder.ClearInsertionPoint();
|
|
}
|
|
|
|
static bool IsUsedAsNormalCleanup(EHScopeStack &EHStack,
|
|
EHScopeStack::stable_iterator C) {
|
|
// If we needed a normal block for any reason, that counts.
|
|
if (cast<EHCleanupScope>(*EHStack.find(C)).getNormalBlock())
|
|
return true;
|
|
|
|
// Check whether any enclosed cleanups were needed.
|
|
for (EHScopeStack::stable_iterator
|
|
I = EHStack.getInnermostNormalCleanup();
|
|
I != C; ) {
|
|
assert(C.strictlyEncloses(I));
|
|
EHCleanupScope &S = cast<EHCleanupScope>(*EHStack.find(I));
|
|
if (S.getNormalBlock()) return true;
|
|
I = S.getEnclosingNormalCleanup();
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static bool IsUsedAsEHCleanup(EHScopeStack &EHStack,
|
|
EHScopeStack::stable_iterator cleanup) {
|
|
// If we needed an EH block for any reason, that counts.
|
|
if (EHStack.find(cleanup)->hasEHBranches())
|
|
return true;
|
|
|
|
// Check whether any enclosed cleanups were needed.
|
|
for (EHScopeStack::stable_iterator
|
|
i = EHStack.getInnermostEHScope(); i != cleanup; ) {
|
|
assert(cleanup.strictlyEncloses(i));
|
|
|
|
EHScope &scope = *EHStack.find(i);
|
|
if (scope.hasEHBranches())
|
|
return true;
|
|
|
|
i = scope.getEnclosingEHScope();
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
enum ForActivation_t {
|
|
ForActivation,
|
|
ForDeactivation
|
|
};
|
|
|
|
/// The given cleanup block is changing activation state. Configure a
|
|
/// cleanup variable if necessary.
|
|
///
|
|
/// It would be good if we had some way of determining if there were
|
|
/// extra uses *after* the change-over point.
|
|
static void SetupCleanupBlockActivation(CodeGenFunction &CGF,
|
|
EHScopeStack::stable_iterator C,
|
|
ForActivation_t kind,
|
|
llvm::Instruction *dominatingIP) {
|
|
EHCleanupScope &Scope = cast<EHCleanupScope>(*CGF.EHStack.find(C));
|
|
|
|
// We always need the flag if we're activating the cleanup in a
|
|
// conditional context, because we have to assume that the current
|
|
// location doesn't necessarily dominate the cleanup's code.
|
|
bool isActivatedInConditional =
|
|
(kind == ForActivation && CGF.isInConditionalBranch());
|
|
|
|
bool needFlag = false;
|
|
|
|
// Calculate whether the cleanup was used:
|
|
|
|
// - as a normal cleanup
|
|
if (Scope.isNormalCleanup() &&
|
|
(isActivatedInConditional || IsUsedAsNormalCleanup(CGF.EHStack, C))) {
|
|
Scope.setTestFlagInNormalCleanup();
|
|
needFlag = true;
|
|
}
|
|
|
|
// - as an EH cleanup
|
|
if (Scope.isEHCleanup() &&
|
|
(isActivatedInConditional || IsUsedAsEHCleanup(CGF.EHStack, C))) {
|
|
Scope.setTestFlagInEHCleanup();
|
|
needFlag = true;
|
|
}
|
|
|
|
// If it hasn't yet been used as either, we're done.
|
|
if (!needFlag) return;
|
|
|
|
Address var = Scope.getActiveFlag();
|
|
if (!var.isValid()) {
|
|
var = CGF.CreateTempAlloca(CGF.Builder.getInt1Ty(), CharUnits::One(),
|
|
"cleanup.isactive");
|
|
Scope.setActiveFlag(var);
|
|
|
|
assert(dominatingIP && "no existing variable and no dominating IP!");
|
|
|
|
// Initialize to true or false depending on whether it was
|
|
// active up to this point.
|
|
llvm::Constant *value = CGF.Builder.getInt1(kind == ForDeactivation);
|
|
|
|
// If we're in a conditional block, ignore the dominating IP and
|
|
// use the outermost conditional branch.
|
|
if (CGF.isInConditionalBranch()) {
|
|
CGF.setBeforeOutermostConditional(value, var);
|
|
} else {
|
|
createStoreInstBefore(value, var, dominatingIP);
|
|
}
|
|
}
|
|
|
|
CGF.Builder.CreateStore(CGF.Builder.getInt1(kind == ForActivation), var);
|
|
}
|
|
|
|
/// Activate a cleanup that was created in an inactivated state.
|
|
void CodeGenFunction::ActivateCleanupBlock(EHScopeStack::stable_iterator C,
|
|
llvm::Instruction *dominatingIP) {
|
|
assert(C != EHStack.stable_end() && "activating bottom of stack?");
|
|
EHCleanupScope &Scope = cast<EHCleanupScope>(*EHStack.find(C));
|
|
assert(!Scope.isActive() && "double activation");
|
|
|
|
SetupCleanupBlockActivation(*this, C, ForActivation, dominatingIP);
|
|
|
|
Scope.setActive(true);
|
|
}
|
|
|
|
/// Deactive a cleanup that was created in an active state.
|
|
void CodeGenFunction::DeactivateCleanupBlock(EHScopeStack::stable_iterator C,
|
|
llvm::Instruction *dominatingIP) {
|
|
assert(C != EHStack.stable_end() && "deactivating bottom of stack?");
|
|
EHCleanupScope &Scope = cast<EHCleanupScope>(*EHStack.find(C));
|
|
assert(Scope.isActive() && "double deactivation");
|
|
|
|
// If it's the top of the stack, just pop it.
|
|
if (C == EHStack.stable_begin()) {
|
|
// If it's a normal cleanup, we need to pretend that the
|
|
// fallthrough is unreachable.
|
|
CGBuilderTy::InsertPoint SavedIP = Builder.saveAndClearIP();
|
|
PopCleanupBlock();
|
|
Builder.restoreIP(SavedIP);
|
|
return;
|
|
}
|
|
|
|
// Otherwise, follow the general case.
|
|
SetupCleanupBlockActivation(*this, C, ForDeactivation, dominatingIP);
|
|
|
|
Scope.setActive(false);
|
|
}
|
|
|
|
Address CodeGenFunction::getNormalCleanupDestSlot() {
|
|
if (!NormalCleanupDest)
|
|
NormalCleanupDest =
|
|
CreateTempAlloca(Builder.getInt32Ty(), "cleanup.dest.slot");
|
|
return Address(NormalCleanupDest, CharUnits::fromQuantity(4));
|
|
}
|
|
|
|
/// Emits all the code to cause the given temporary to be cleaned up.
|
|
void CodeGenFunction::EmitCXXTemporary(const CXXTemporary *Temporary,
|
|
QualType TempType,
|
|
Address Ptr) {
|
|
pushDestroy(NormalAndEHCleanup, Ptr, TempType, destroyCXXObject,
|
|
/*useEHCleanup*/ true);
|
|
}
|