Another attempt at resolving the deadlock issue @GeorgeHuyubo discovered (his previous [attempt](https://github.com/llvm/llvm-project/pull/160225)). This change can be summarized as the following: * Plumb through a boolean flag to force no preload in `GetOrCreateModules` all the way through to `LoadModuleAtAddress`. * Parallelize `Module::PreloadSymbols` separately from `Target::GetOrCreateModule` and its caller `LoadModuleAtAddress` (this is what avoids the deadlock). These changes roughly maintain the performance characteristics of the previous implementation of parallel module loading. Testing on targets with between 5000 and 14000 modules, I saw similar numbers as before, often more than 10% faster in the new implementation across multiple trials for these massive targets. I think it's because we have less lock contention with this approach. # The deadlock See [bt.txt](https://github.com/user-attachments/files/22524471/bt.txt) for a sample backtrace of LLDB when the deadlock occurs. As @GeorgeHuyubo explains in his [PR](https://github.com/llvm/llvm-project/pull/160225), the deadlock occurs from an ABBA deadlock that happens when a thread context-switches out of `Module::PreloadSymbols`, goes into `Target::GetOrCreateModule` for another module, possibly entering this block: ``` if (!module_sp) { // The platform is responsible for finding and caching an appropriate // module in the shared module cache. if (m_platform_sp) { error = m_platform_sp->GetSharedModule( module_spec, m_process_sp.get(), module_sp, &search_paths, &old_modules, &did_create_module); } else { error = Status::FromErrorString("no platform is currently set"); } } ``` `Module::PreloadSymbols` holds a module-level mutex, and then `GetSharedModule` *attempts* to hold the mutex of the global shared `ModuleList`. So, this thread holds the module mutex, and waits on the global shared `ModuleList` mutex. A competing thread may execute `Target::GetOrCreateModule`, enter the same block as above, grabbing the global shared `ModuleList` mutex. Then, in `ModuleList::GetSharedModule`, we eventually call `ModuleList::FindModules` which eventually waits for the `Module` mutex held by the first thread (via `Module::GetUUID`). Thus, we deadlock. ## Reproducing the deadlock It might be worth noting that I've never been able to observe this deadlock issue during live debugging (e.g. launching or attaching to processes), however we were able to consistently reproduce this issue with coredumps when using the following settings: ``` (lldb) settings set target.parallel-module-load true (lldb) settings set target.preload-symbols true (lldb) settings set symbols.load-on-demand false (lldb) target create --core /some/core/file/here # deadlock happens ``` ## How this change avoids this deadlock This change avoids concurrent executions of `Module::PreloadSymbols` with `Target::GetOrCreateModule` by waiting until after the `Target::GetOrCreateModule` executions to run `Module::PreloadSymbols` in parallel. This avoids the ordering of holding a Module lock *then* the ModuleList lock, as `Target::GetOrCreateModule` executions maintain the ordering of the shared ModuleList lock first (from what I've read and tested). ## Why not read-write lock? Some feedback in https://github.com/llvm/llvm-project/pull/160225 was to modify mutexes used in these components with read-write locks. This might be a good idea overall, but I don't think it would *easily* resolve this specific deadlock. `Module::PreloadSymbols` would probably need a write lock to Module, so even if we had a read lock in `Module::GetUUID` we would still contend. Maybe the `ModuleList` lock could be a read lock that converts to a write lock if it chooses to update the module, but it seems likely that some thread would try to update the shared module list and then the write lock would contend again. Perhaps with deeper architectural changes, we could fix this issue? # Other attempts One downside of this approach (and the former approach of parallel module loading) is that each DYLD would need to implement this pattern themselves. With @clayborg's help, I looked at a few other approaches: * In `Target::GetOrCreateModule`, backgrounding the `Module::PreloadSymbols` call by adding it directly to the thread pool via `Debugger::GetThreadPool().async()`. This required adding a lock to `Module::SetLoadAddress` (probably should be one there already) since `ObjectFileELF::SetLoadAddress` is not thread-safe (updates sections). Unfortunately, during execution, this causes the preload symbols to run synchronously with `Target::GetOrCreateModule`, preventing us from truly parallelizing the execution. * In `Module::PreloadSymbols`, backgrounding the `symtab` and `sym_file` `PreloadSymbols` calls individually, but similar issues as the above. * Passing a callback function like https://github.com/swiftlang/llvm-project/pull/10746 instead of the boolean I use in this change. It's functionally the same change IMO, with some design tradeoffs: * Pro: the caller doesn't need to explicitly call `Module::PreloadSymbols` itself, and can instead call whatever function is passed into the callback. * Con: the caller needs to delay the execution of the callback such that it occurs after the `GetOrCreateModule` logic, otherwise we run into the same issue. I thought this would be trickier for the caller, requiring some kinda condition variable or otherwise storing the calls to execute afterwards. # Test Plan: ``` ninja check-lldb ``` --------- Co-authored-by: Tom Yang <toyang@fb.com>
1016 lines
36 KiB
C++
1016 lines
36 KiB
C++
//===-- DynamicLoaderPOSIXDYLD.cpp ----------------------------------------===//
|
|
//
|
|
// Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions.
|
|
// See https://llvm.org/LICENSE.txt for license information.
|
|
// SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception
|
|
//
|
|
//===----------------------------------------------------------------------===//
|
|
|
|
// Main header include
|
|
#include "DynamicLoaderPOSIXDYLD.h"
|
|
|
|
#include "lldb/Breakpoint/BreakpointLocation.h"
|
|
#include "lldb/Core/Debugger.h"
|
|
#include "lldb/Core/Module.h"
|
|
#include "lldb/Core/ModuleSpec.h"
|
|
#include "lldb/Core/PluginManager.h"
|
|
#include "lldb/Core/Section.h"
|
|
#include "lldb/Symbol/Function.h"
|
|
#include "lldb/Symbol/ObjectFile.h"
|
|
#include "lldb/Target/MemoryRegionInfo.h"
|
|
#include "lldb/Target/Platform.h"
|
|
#include "lldb/Target/RegisterContext.h"
|
|
#include "lldb/Target/Target.h"
|
|
#include "lldb/Target/Thread.h"
|
|
#include "lldb/Target/ThreadPlanRunToAddress.h"
|
|
#include "lldb/Utility/LLDBLog.h"
|
|
#include "lldb/Utility/Log.h"
|
|
#include "lldb/Utility/ProcessInfo.h"
|
|
#include "llvm/Support/ThreadPool.h"
|
|
|
|
#include <memory>
|
|
#include <optional>
|
|
|
|
using namespace lldb;
|
|
using namespace lldb_private;
|
|
|
|
LLDB_PLUGIN_DEFINE_ADV(DynamicLoaderPOSIXDYLD, DynamicLoaderPosixDYLD)
|
|
|
|
void DynamicLoaderPOSIXDYLD::Initialize() {
|
|
PluginManager::RegisterPlugin(GetPluginNameStatic(),
|
|
GetPluginDescriptionStatic(), CreateInstance);
|
|
}
|
|
|
|
void DynamicLoaderPOSIXDYLD::Terminate() {}
|
|
|
|
llvm::StringRef DynamicLoaderPOSIXDYLD::GetPluginDescriptionStatic() {
|
|
return "Dynamic loader plug-in that watches for shared library "
|
|
"loads/unloads in POSIX processes.";
|
|
}
|
|
|
|
DynamicLoader *DynamicLoaderPOSIXDYLD::CreateInstance(Process *process,
|
|
bool force) {
|
|
bool create = force;
|
|
if (!create) {
|
|
const llvm::Triple &triple_ref =
|
|
process->GetTarget().GetArchitecture().GetTriple();
|
|
if (triple_ref.getOS() == llvm::Triple::FreeBSD ||
|
|
triple_ref.getOS() == llvm::Triple::Linux ||
|
|
triple_ref.getOS() == llvm::Triple::NetBSD ||
|
|
triple_ref.getOS() == llvm::Triple::OpenBSD)
|
|
create = true;
|
|
}
|
|
|
|
if (create)
|
|
return new DynamicLoaderPOSIXDYLD(process);
|
|
return nullptr;
|
|
}
|
|
|
|
DynamicLoaderPOSIXDYLD::DynamicLoaderPOSIXDYLD(Process *process)
|
|
: DynamicLoader(process), m_rendezvous(process),
|
|
m_load_offset(LLDB_INVALID_ADDRESS), m_entry_point(LLDB_INVALID_ADDRESS),
|
|
m_auxv(), m_dyld_bid(LLDB_INVALID_BREAK_ID),
|
|
m_vdso_base(LLDB_INVALID_ADDRESS),
|
|
m_interpreter_base(LLDB_INVALID_ADDRESS), m_initial_modules_added(false) {
|
|
}
|
|
|
|
DynamicLoaderPOSIXDYLD::~DynamicLoaderPOSIXDYLD() {
|
|
if (m_dyld_bid != LLDB_INVALID_BREAK_ID) {
|
|
m_process->GetTarget().RemoveBreakpointByID(m_dyld_bid);
|
|
m_dyld_bid = LLDB_INVALID_BREAK_ID;
|
|
}
|
|
}
|
|
|
|
void DynamicLoaderPOSIXDYLD::DidAttach() {
|
|
Log *log = GetLog(LLDBLog::DynamicLoader);
|
|
LLDB_LOGF(log, "DynamicLoaderPOSIXDYLD::%s() pid %" PRIu64, __FUNCTION__,
|
|
m_process ? m_process->GetID() : LLDB_INVALID_PROCESS_ID);
|
|
m_auxv = std::make_unique<AuxVector>(m_process->GetAuxvData());
|
|
|
|
LLDB_LOGF(
|
|
log, "DynamicLoaderPOSIXDYLD::%s pid %" PRIu64 " reloaded auxv data",
|
|
__FUNCTION__, m_process ? m_process->GetID() : LLDB_INVALID_PROCESS_ID);
|
|
|
|
ModuleSP executable_sp = GetTargetExecutable();
|
|
ResolveExecutableModule(executable_sp);
|
|
m_rendezvous.UpdateExecutablePath();
|
|
|
|
// find the main process load offset
|
|
addr_t load_offset = ComputeLoadOffset();
|
|
LLDB_LOGF(log,
|
|
"DynamicLoaderPOSIXDYLD::%s pid %" PRIu64
|
|
" executable '%s', load_offset 0x%" PRIx64,
|
|
__FUNCTION__,
|
|
m_process ? m_process->GetID() : LLDB_INVALID_PROCESS_ID,
|
|
executable_sp ? executable_sp->GetFileSpec().GetPath().c_str()
|
|
: "<null executable>",
|
|
load_offset);
|
|
|
|
EvalSpecialModulesStatus();
|
|
|
|
// if we dont have a load address we cant re-base
|
|
bool rebase_exec = load_offset != LLDB_INVALID_ADDRESS;
|
|
|
|
// if the target executable should be re-based
|
|
if (rebase_exec) {
|
|
ModuleList module_list;
|
|
|
|
module_list.Append(executable_sp);
|
|
LLDB_LOGF(log,
|
|
"DynamicLoaderPOSIXDYLD::%s pid %" PRIu64
|
|
" added executable '%s' to module load list",
|
|
__FUNCTION__,
|
|
m_process ? m_process->GetID() : LLDB_INVALID_PROCESS_ID,
|
|
executable_sp->GetFileSpec().GetPath().c_str());
|
|
|
|
UpdateLoadedSections(executable_sp, LLDB_INVALID_ADDRESS, load_offset,
|
|
true);
|
|
|
|
LoadAllCurrentModules();
|
|
|
|
m_process->GetTarget().ModulesDidLoad(module_list);
|
|
if (log) {
|
|
LLDB_LOGF(log,
|
|
"DynamicLoaderPOSIXDYLD::%s told the target about the "
|
|
"modules that loaded:",
|
|
__FUNCTION__);
|
|
for (auto module_sp : module_list.Modules()) {
|
|
LLDB_LOGF(log, "-- [module] %s (pid %" PRIu64 ")",
|
|
module_sp ? module_sp->GetFileSpec().GetPath().c_str()
|
|
: "<null>",
|
|
m_process ? m_process->GetID() : LLDB_INVALID_PROCESS_ID);
|
|
}
|
|
}
|
|
}
|
|
|
|
if (executable_sp.get()) {
|
|
if (!SetRendezvousBreakpoint()) {
|
|
// If we cannot establish rendezvous breakpoint right now we'll try again
|
|
// at entry point.
|
|
ProbeEntry();
|
|
}
|
|
}
|
|
}
|
|
|
|
void DynamicLoaderPOSIXDYLD::DidLaunch() {
|
|
Log *log = GetLog(LLDBLog::DynamicLoader);
|
|
LLDB_LOGF(log, "DynamicLoaderPOSIXDYLD::%s()", __FUNCTION__);
|
|
|
|
ModuleSP executable;
|
|
addr_t load_offset;
|
|
|
|
m_auxv = std::make_unique<AuxVector>(m_process->GetAuxvData());
|
|
|
|
executable = GetTargetExecutable();
|
|
load_offset = ComputeLoadOffset();
|
|
EvalSpecialModulesStatus();
|
|
|
|
if (executable.get() && load_offset != LLDB_INVALID_ADDRESS) {
|
|
ModuleList module_list;
|
|
module_list.Append(executable);
|
|
UpdateLoadedSections(executable, LLDB_INVALID_ADDRESS, load_offset, true);
|
|
|
|
LLDB_LOGF(log, "DynamicLoaderPOSIXDYLD::%s about to call ProbeEntry()",
|
|
__FUNCTION__);
|
|
|
|
if (!SetRendezvousBreakpoint()) {
|
|
// If we cannot establish rendezvous breakpoint right now we'll try again
|
|
// at entry point.
|
|
ProbeEntry();
|
|
}
|
|
|
|
LoadVDSO();
|
|
m_process->GetTarget().ModulesDidLoad(module_list);
|
|
}
|
|
}
|
|
|
|
Status DynamicLoaderPOSIXDYLD::CanLoadImage() { return Status(); }
|
|
|
|
void DynamicLoaderPOSIXDYLD::SetLoadedModule(const ModuleSP &module_sp,
|
|
addr_t link_map_addr) {
|
|
llvm::sys::ScopedWriter lock(m_loaded_modules_rw_mutex);
|
|
m_loaded_modules[module_sp] = link_map_addr;
|
|
}
|
|
|
|
void DynamicLoaderPOSIXDYLD::UnloadModule(const ModuleSP &module_sp) {
|
|
llvm::sys::ScopedWriter lock(m_loaded_modules_rw_mutex);
|
|
m_loaded_modules.erase(module_sp);
|
|
}
|
|
|
|
std::optional<lldb::addr_t>
|
|
DynamicLoaderPOSIXDYLD::GetLoadedModuleLinkAddr(const ModuleSP &module_sp) {
|
|
llvm::sys::ScopedReader lock(m_loaded_modules_rw_mutex);
|
|
auto it = m_loaded_modules.find(module_sp);
|
|
if (it != m_loaded_modules.end())
|
|
return it->second;
|
|
return std::nullopt;
|
|
}
|
|
|
|
void DynamicLoaderPOSIXDYLD::UpdateLoadedSections(ModuleSP module,
|
|
addr_t link_map_addr,
|
|
addr_t base_addr,
|
|
bool base_addr_is_offset) {
|
|
SetLoadedModule(module, link_map_addr);
|
|
|
|
UpdateLoadedSectionsCommon(module, base_addr, base_addr_is_offset);
|
|
}
|
|
|
|
void DynamicLoaderPOSIXDYLD::UnloadSections(const ModuleSP module) {
|
|
UnloadModule(module);
|
|
|
|
UnloadSectionsCommon(module);
|
|
}
|
|
|
|
void DynamicLoaderPOSIXDYLD::ProbeEntry() {
|
|
Log *log = GetLog(LLDBLog::DynamicLoader);
|
|
|
|
// If we have a core file, we don't need any breakpoints.
|
|
if (IsCoreFile())
|
|
return;
|
|
|
|
const addr_t entry = GetEntryPoint();
|
|
if (entry == LLDB_INVALID_ADDRESS) {
|
|
LLDB_LOGF(
|
|
log,
|
|
"DynamicLoaderPOSIXDYLD::%s pid %" PRIu64
|
|
" GetEntryPoint() returned no address, not setting entry breakpoint",
|
|
__FUNCTION__, m_process ? m_process->GetID() : LLDB_INVALID_PROCESS_ID);
|
|
return;
|
|
}
|
|
|
|
LLDB_LOGF(log,
|
|
"DynamicLoaderPOSIXDYLD::%s pid %" PRIu64
|
|
" GetEntryPoint() returned address 0x%" PRIx64
|
|
", setting entry breakpoint",
|
|
__FUNCTION__,
|
|
m_process ? m_process->GetID() : LLDB_INVALID_PROCESS_ID, entry);
|
|
|
|
if (m_process) {
|
|
Breakpoint *const entry_break =
|
|
m_process->GetTarget().CreateBreakpoint(entry, true, false).get();
|
|
entry_break->SetCallback(EntryBreakpointHit, this, true);
|
|
entry_break->SetBreakpointKind("shared-library-event");
|
|
|
|
// Shoudn't hit this more than once.
|
|
entry_break->SetOneShot(true);
|
|
}
|
|
}
|
|
|
|
// The runtime linker has run and initialized the rendezvous structure once the
|
|
// process has hit its entry point. When we hit the corresponding breakpoint
|
|
// we interrogate the rendezvous structure to get the load addresses of all
|
|
// dependent modules for the process. Similarly, we can discover the runtime
|
|
// linker function and setup a breakpoint to notify us of any dynamically
|
|
// loaded modules (via dlopen).
|
|
bool DynamicLoaderPOSIXDYLD::EntryBreakpointHit(
|
|
void *baton, StoppointCallbackContext *context, user_id_t break_id,
|
|
user_id_t break_loc_id) {
|
|
assert(baton && "null baton");
|
|
if (!baton)
|
|
return false;
|
|
|
|
Log *log = GetLog(LLDBLog::DynamicLoader);
|
|
DynamicLoaderPOSIXDYLD *const dyld_instance =
|
|
static_cast<DynamicLoaderPOSIXDYLD *>(baton);
|
|
LLDB_LOGF(log, "DynamicLoaderPOSIXDYLD::%s called for pid %" PRIu64,
|
|
__FUNCTION__,
|
|
dyld_instance->m_process ? dyld_instance->m_process->GetID()
|
|
: LLDB_INVALID_PROCESS_ID);
|
|
|
|
// Disable the breakpoint --- if a stop happens right after this, which we've
|
|
// seen on occasion, we don't want the breakpoint stepping thread-plan logic
|
|
// to show a breakpoint instruction at the disassembled entry point to the
|
|
// program. Disabling it prevents it. (One-shot is not enough - one-shot
|
|
// removal logic only happens after the breakpoint goes public, which wasn't
|
|
// happening in our scenario).
|
|
if (dyld_instance->m_process) {
|
|
BreakpointSP breakpoint_sp =
|
|
dyld_instance->m_process->GetTarget().GetBreakpointByID(break_id);
|
|
if (breakpoint_sp) {
|
|
LLDB_LOGF(log,
|
|
"DynamicLoaderPOSIXDYLD::%s pid %" PRIu64
|
|
" disabling breakpoint id %" PRIu64,
|
|
__FUNCTION__, dyld_instance->m_process->GetID(), break_id);
|
|
breakpoint_sp->SetEnabled(false);
|
|
} else {
|
|
LLDB_LOGF(log,
|
|
"DynamicLoaderPOSIXDYLD::%s pid %" PRIu64
|
|
" failed to find breakpoint for breakpoint id %" PRIu64,
|
|
__FUNCTION__, dyld_instance->m_process->GetID(), break_id);
|
|
}
|
|
} else {
|
|
LLDB_LOGF(log,
|
|
"DynamicLoaderPOSIXDYLD::%s breakpoint id %" PRIu64
|
|
" no Process instance! Cannot disable breakpoint",
|
|
__FUNCTION__, break_id);
|
|
}
|
|
|
|
dyld_instance->LoadAllCurrentModules();
|
|
dyld_instance->SetRendezvousBreakpoint();
|
|
return false; // Continue running.
|
|
}
|
|
|
|
bool DynamicLoaderPOSIXDYLD::SetRendezvousBreakpoint() {
|
|
Log *log = GetLog(LLDBLog::DynamicLoader);
|
|
|
|
// If we have a core file, we don't need any breakpoints.
|
|
if (IsCoreFile())
|
|
return false;
|
|
|
|
if (m_dyld_bid != LLDB_INVALID_BREAK_ID) {
|
|
LLDB_LOG(log,
|
|
"Rendezvous breakpoint breakpoint id {0} for pid {1}"
|
|
"is already set.",
|
|
m_dyld_bid,
|
|
m_process ? m_process->GetID() : LLDB_INVALID_PROCESS_ID);
|
|
return true;
|
|
}
|
|
|
|
addr_t break_addr;
|
|
Target &target = m_process->GetTarget();
|
|
BreakpointSP dyld_break;
|
|
if (m_rendezvous.IsValid() && m_rendezvous.GetBreakAddress() != 0) {
|
|
break_addr = m_rendezvous.GetBreakAddress();
|
|
LLDB_LOG(log, "Setting rendezvous break address for pid {0} at {1:x}",
|
|
m_process ? m_process->GetID() : LLDB_INVALID_PROCESS_ID,
|
|
break_addr);
|
|
dyld_break = target.CreateBreakpoint(break_addr, true, false);
|
|
} else {
|
|
LLDB_LOG(log, "Rendezvous structure is not set up yet. "
|
|
"Trying to locate rendezvous breakpoint in the interpreter "
|
|
"by symbol name.");
|
|
// Function names from different dynamic loaders that are known to be
|
|
// used as rendezvous between the loader and debuggers.
|
|
static std::vector<std::string> DebugStateCandidates{
|
|
"_dl_debug_state", "rtld_db_dlactivity", "__dl_rtld_db_dlactivity",
|
|
"r_debug_state", "_r_debug_state", "_rtld_debug_state",
|
|
};
|
|
|
|
ModuleSP interpreter = LoadInterpreterModule();
|
|
FileSpecList containingModules;
|
|
if (interpreter)
|
|
containingModules.Append(interpreter->GetFileSpec());
|
|
else
|
|
containingModules.Append(
|
|
m_process->GetTarget().GetExecutableModulePointer()->GetFileSpec());
|
|
|
|
dyld_break = target.CreateBreakpoint(
|
|
&containingModules, /*containingSourceFiles=*/nullptr,
|
|
DebugStateCandidates, eFunctionNameTypeFull, eLanguageTypeC,
|
|
/*m_offset=*/0,
|
|
/*skip_prologue=*/eLazyBoolNo,
|
|
/*internal=*/true,
|
|
/*request_hardware=*/false);
|
|
}
|
|
|
|
if (dyld_break->GetNumResolvedLocations() != 1) {
|
|
LLDB_LOG(
|
|
log,
|
|
"Rendezvous breakpoint has abnormal number of"
|
|
" resolved locations ({0}) in pid {1}. It's supposed to be exactly 1.",
|
|
dyld_break->GetNumResolvedLocations(),
|
|
m_process ? m_process->GetID() : LLDB_INVALID_PROCESS_ID);
|
|
|
|
target.RemoveBreakpointByID(dyld_break->GetID());
|
|
return false;
|
|
}
|
|
|
|
BreakpointLocationSP location = dyld_break->GetLocationAtIndex(0);
|
|
LLDB_LOG(log,
|
|
"Successfully set rendezvous breakpoint at address {0:x} "
|
|
"for pid {1}",
|
|
location->GetLoadAddress(),
|
|
m_process ? m_process->GetID() : LLDB_INVALID_PROCESS_ID);
|
|
|
|
dyld_break->SetCallback(RendezvousBreakpointHit, this, true);
|
|
dyld_break->SetBreakpointKind("shared-library-event");
|
|
m_dyld_bid = dyld_break->GetID();
|
|
return true;
|
|
}
|
|
|
|
bool DynamicLoaderPOSIXDYLD::RendezvousBreakpointHit(
|
|
void *baton, StoppointCallbackContext *context, user_id_t break_id,
|
|
user_id_t break_loc_id) {
|
|
assert(baton && "null baton");
|
|
if (!baton)
|
|
return false;
|
|
|
|
Log *log = GetLog(LLDBLog::DynamicLoader);
|
|
DynamicLoaderPOSIXDYLD *const dyld_instance =
|
|
static_cast<DynamicLoaderPOSIXDYLD *>(baton);
|
|
LLDB_LOGF(log, "DynamicLoaderPOSIXDYLD::%s called for pid %" PRIu64,
|
|
__FUNCTION__,
|
|
dyld_instance->m_process ? dyld_instance->m_process->GetID()
|
|
: LLDB_INVALID_PROCESS_ID);
|
|
|
|
dyld_instance->RefreshModules();
|
|
|
|
// Return true to stop the target, false to just let the target run.
|
|
const bool stop_when_images_change = dyld_instance->GetStopWhenImagesChange();
|
|
LLDB_LOGF(log,
|
|
"DynamicLoaderPOSIXDYLD::%s pid %" PRIu64
|
|
" stop_when_images_change=%s",
|
|
__FUNCTION__,
|
|
dyld_instance->m_process ? dyld_instance->m_process->GetID()
|
|
: LLDB_INVALID_PROCESS_ID,
|
|
stop_when_images_change ? "true" : "false");
|
|
return stop_when_images_change;
|
|
}
|
|
|
|
void DynamicLoaderPOSIXDYLD::RefreshModules() {
|
|
if (!m_rendezvous.Resolve())
|
|
return;
|
|
|
|
// The rendezvous class doesn't enumerate the main module, so track that
|
|
// ourselves here.
|
|
ModuleSP executable = GetTargetExecutable();
|
|
SetLoadedModule(executable, m_rendezvous.GetLinkMapAddress());
|
|
|
|
DYLDRendezvous::iterator I;
|
|
DYLDRendezvous::iterator E;
|
|
|
|
ModuleList &loaded_modules = m_process->GetTarget().GetImages();
|
|
|
|
if (m_rendezvous.ModulesDidLoad() || !m_initial_modules_added) {
|
|
ModuleList new_modules;
|
|
|
|
// If this is the first time rendezvous breakpoint fires, we need
|
|
// to take care of adding all the initial modules reported by
|
|
// the loader. This is necessary to list ld-linux.so on Linux,
|
|
// and all DT_NEEDED entries on *BSD.
|
|
if (m_initial_modules_added) {
|
|
I = m_rendezvous.loaded_begin();
|
|
E = m_rendezvous.loaded_end();
|
|
} else {
|
|
I = m_rendezvous.begin();
|
|
E = m_rendezvous.end();
|
|
m_initial_modules_added = true;
|
|
}
|
|
|
|
// Synchronize reading and writing of `m_interpreter_module`.
|
|
std::mutex interpreter_module_mutex;
|
|
// We should be able to take SOEntry as reference since the data
|
|
// exists for the duration of this call in `m_rendezvous`.
|
|
auto load_module_fn =
|
|
[this, &loaded_modules, &new_modules,
|
|
&interpreter_module_mutex](const DYLDRendezvous::SOEntry &so_entry) {
|
|
// Don't load a duplicate copy of ld.so if we have already loaded it
|
|
// earlier in LoadInterpreterModule. If we instead loaded then
|
|
// unloaded it later, the section information for ld.so would be
|
|
// removed. That information is required for placing breakpoints on
|
|
// Arm/Thumb systems.
|
|
{
|
|
// `m_interpreter_module` may be modified by another thread at the
|
|
// same time, so we guard the access here.
|
|
std::lock_guard<std::mutex> lock(interpreter_module_mutex);
|
|
if ((m_interpreter_module.lock() != nullptr) &&
|
|
(so_entry.base_addr == m_interpreter_base))
|
|
return;
|
|
}
|
|
|
|
ModuleSP module_sp = LoadModuleAtAddress(
|
|
so_entry.file_spec, so_entry.link_addr, so_entry.base_addr,
|
|
/*base_addr_is_offset=*/true);
|
|
if (!module_sp.get())
|
|
return;
|
|
|
|
{
|
|
// `m_interpreter_module` may be modified by another thread at the
|
|
// same time, so we guard the access here.
|
|
std::lock_guard<std::mutex> lock(interpreter_module_mutex);
|
|
// Set the interpreter module, if this is the interpreter.
|
|
if (module_sp->GetObjectFile()->GetBaseAddress().GetLoadAddress(
|
|
&m_process->GetTarget()) == m_interpreter_base) {
|
|
ModuleSP interpreter_sp = m_interpreter_module.lock();
|
|
if (m_interpreter_module.lock() == nullptr) {
|
|
m_interpreter_module = module_sp;
|
|
} else if (module_sp == interpreter_sp) {
|
|
// Module already loaded.
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
// Note: in a multi-threaded environment, these module lists may be
|
|
// appended to out-of-order. This is fine, since there's no
|
|
// expectation for `loaded_modules` or `new_modules` to be in any
|
|
// particular order, and appending to each module list is thread-safe.
|
|
// Also, `new_modules` is only used for the `ModulesDidLoad` call at
|
|
// the end of this function.
|
|
loaded_modules.AppendIfNeeded(module_sp);
|
|
new_modules.Append(module_sp);
|
|
};
|
|
|
|
if (m_process->GetTarget().GetParallelModuleLoad()) {
|
|
llvm::ThreadPoolTaskGroup task_group(Debugger::GetThreadPool());
|
|
for (; I != E; ++I)
|
|
task_group.async(load_module_fn, *I);
|
|
task_group.wait();
|
|
} else {
|
|
for (; I != E; ++I)
|
|
load_module_fn(*I);
|
|
}
|
|
|
|
m_process->GetTarget().ModulesDidLoad(new_modules);
|
|
}
|
|
|
|
if (m_rendezvous.ModulesDidUnload()) {
|
|
ModuleList old_modules;
|
|
|
|
E = m_rendezvous.unloaded_end();
|
|
for (I = m_rendezvous.unloaded_begin(); I != E; ++I) {
|
|
ModuleSpec module_spec{I->file_spec};
|
|
ModuleSP module_sp = loaded_modules.FindFirstModule(module_spec);
|
|
|
|
if (module_sp.get()) {
|
|
old_modules.Append(module_sp);
|
|
UnloadSections(module_sp);
|
|
}
|
|
}
|
|
loaded_modules.Remove(old_modules);
|
|
m_process->GetTarget().ModulesDidUnload(old_modules, false);
|
|
}
|
|
}
|
|
|
|
ThreadPlanSP
|
|
DynamicLoaderPOSIXDYLD::GetStepThroughTrampolinePlan(Thread &thread,
|
|
bool stop) {
|
|
ThreadPlanSP thread_plan_sp;
|
|
|
|
StackFrame *frame = thread.GetStackFrameAtIndex(0).get();
|
|
const SymbolContext &context = frame->GetSymbolContext(eSymbolContextSymbol);
|
|
Symbol *sym = context.symbol;
|
|
|
|
if (sym == nullptr || !sym->IsTrampoline())
|
|
return thread_plan_sp;
|
|
|
|
ConstString sym_name = sym->GetMangled().GetName(Mangled::ePreferMangled);
|
|
if (!sym_name)
|
|
return thread_plan_sp;
|
|
|
|
SymbolContextList target_symbols;
|
|
Target &target = thread.GetProcess()->GetTarget();
|
|
const ModuleList &images = target.GetImages();
|
|
|
|
llvm::StringRef target_name = sym_name.GetStringRef();
|
|
// On AArch64, the trampoline name has a prefix (__AArch64ADRPThunk_ or
|
|
// __AArch64AbsLongThunk_) added to the function name. If we detect a
|
|
// trampoline with the prefix, we need to remove the prefix to find the
|
|
// function symbol.
|
|
if (target_name.consume_front("__AArch64ADRPThunk_") ||
|
|
target_name.consume_front("__AArch64AbsLongThunk_")) {
|
|
// An empty target name can happen for trampolines generated for
|
|
// section-referencing relocations.
|
|
if (!target_name.empty()) {
|
|
sym_name = ConstString(target_name);
|
|
}
|
|
}
|
|
images.FindSymbolsWithNameAndType(sym_name, eSymbolTypeCode, target_symbols);
|
|
if (!target_symbols.GetSize())
|
|
return thread_plan_sp;
|
|
|
|
typedef std::vector<lldb::addr_t> AddressVector;
|
|
AddressVector addrs;
|
|
for (const SymbolContext &context : target_symbols) {
|
|
addr_t addr = context.GetFunctionOrSymbolAddress().GetLoadAddress(&target);
|
|
if (addr != LLDB_INVALID_ADDRESS)
|
|
addrs.push_back(addr);
|
|
}
|
|
|
|
if (addrs.size() > 0) {
|
|
AddressVector::iterator start = addrs.begin();
|
|
AddressVector::iterator end = addrs.end();
|
|
|
|
llvm::sort(start, end);
|
|
addrs.erase(std::unique(start, end), end);
|
|
thread_plan_sp =
|
|
std::make_shared<ThreadPlanRunToAddress>(thread, addrs, stop);
|
|
}
|
|
|
|
return thread_plan_sp;
|
|
}
|
|
|
|
void DynamicLoaderPOSIXDYLD::LoadVDSO() {
|
|
if (m_vdso_base == LLDB_INVALID_ADDRESS)
|
|
return;
|
|
|
|
FileSpec file("[vdso]");
|
|
|
|
MemoryRegionInfo info;
|
|
Status status = m_process->GetMemoryRegionInfo(m_vdso_base, info);
|
|
if (status.Fail()) {
|
|
Log *log = GetLog(LLDBLog::DynamicLoader);
|
|
LLDB_LOG(log, "Failed to get vdso region info: {0}", status);
|
|
return;
|
|
}
|
|
|
|
if (ModuleSP module_sp = m_process->ReadModuleFromMemory(
|
|
file, m_vdso_base, info.GetRange().GetByteSize())) {
|
|
UpdateLoadedSections(module_sp, LLDB_INVALID_ADDRESS, m_vdso_base, false);
|
|
m_process->GetTarget().GetImages().AppendIfNeeded(module_sp);
|
|
}
|
|
}
|
|
|
|
ModuleSP DynamicLoaderPOSIXDYLD::LoadInterpreterModule() {
|
|
if (m_interpreter_base == LLDB_INVALID_ADDRESS)
|
|
return nullptr;
|
|
|
|
MemoryRegionInfo info;
|
|
Target &target = m_process->GetTarget();
|
|
Status status = m_process->GetMemoryRegionInfo(m_interpreter_base, info);
|
|
if (status.Fail() || info.GetMapped() != MemoryRegionInfo::eYes ||
|
|
info.GetName().IsEmpty()) {
|
|
Log *log = GetLog(LLDBLog::DynamicLoader);
|
|
LLDB_LOG(log, "Failed to get interpreter region info: {0}", status);
|
|
return nullptr;
|
|
}
|
|
|
|
FileSpec file(info.GetName().GetCString());
|
|
ModuleSpec module_spec(file, target.GetArchitecture());
|
|
|
|
// Don't notify that module is added here because its loading section
|
|
// addresses are not updated yet. We manually notify it below.
|
|
if (ModuleSP module_sp =
|
|
target.GetOrCreateModule(module_spec, /*notify=*/false)) {
|
|
UpdateLoadedSections(module_sp, LLDB_INVALID_ADDRESS, m_interpreter_base,
|
|
false);
|
|
// Manually notify that dynamic linker is loaded after updating load section
|
|
// addersses so that breakpoints can be resolved.
|
|
ModuleList module_list;
|
|
module_list.Append(module_sp);
|
|
target.ModulesDidLoad(module_list);
|
|
m_interpreter_module = module_sp;
|
|
return module_sp;
|
|
}
|
|
return nullptr;
|
|
}
|
|
|
|
ModuleSP DynamicLoaderPOSIXDYLD::LoadModuleAtAddress(const FileSpec &file,
|
|
addr_t link_map_addr,
|
|
addr_t base_addr,
|
|
bool base_addr_is_offset) {
|
|
if (ModuleSP module_sp = DynamicLoader::LoadModuleAtAddress(
|
|
file, link_map_addr, base_addr, base_addr_is_offset))
|
|
return module_sp;
|
|
|
|
// This works around an dynamic linker "bug" on android <= 23, where the
|
|
// dynamic linker would report the application name
|
|
// (e.g. com.example.myapplication) instead of the main process binary
|
|
// (/system/bin/app_process(32)). The logic is not sound in general (it
|
|
// assumes base_addr is the real address, even though it actually is a load
|
|
// bias), but it happens to work on android because app_process has a file
|
|
// address of zero.
|
|
// This should be removed after we drop support for android-23.
|
|
if (m_process->GetTarget().GetArchitecture().GetTriple().isAndroid()) {
|
|
MemoryRegionInfo memory_info;
|
|
Status error = m_process->GetMemoryRegionInfo(base_addr, memory_info);
|
|
if (error.Success() && memory_info.GetMapped() &&
|
|
memory_info.GetRange().GetRangeBase() == base_addr &&
|
|
!(memory_info.GetName().IsEmpty())) {
|
|
if (ModuleSP module_sp = DynamicLoader::LoadModuleAtAddress(
|
|
FileSpec(memory_info.GetName().GetStringRef()), link_map_addr,
|
|
base_addr, base_addr_is_offset))
|
|
return module_sp;
|
|
}
|
|
}
|
|
|
|
return nullptr;
|
|
}
|
|
|
|
void DynamicLoaderPOSIXDYLD::LoadAllCurrentModules() {
|
|
DYLDRendezvous::iterator I;
|
|
DYLDRendezvous::iterator E;
|
|
ModuleList module_list;
|
|
Log *log = GetLog(LLDBLog::DynamicLoader);
|
|
|
|
LoadVDSO();
|
|
|
|
if (!m_rendezvous.Resolve()) {
|
|
LLDB_LOGF(log,
|
|
"DynamicLoaderPOSIXDYLD::%s unable to resolve POSIX DYLD "
|
|
"rendezvous address",
|
|
__FUNCTION__);
|
|
return;
|
|
}
|
|
|
|
// The rendezvous class doesn't enumerate the main module, so track that
|
|
// ourselves here.
|
|
ModuleSP executable = GetTargetExecutable();
|
|
SetLoadedModule(executable, m_rendezvous.GetLinkMapAddress());
|
|
|
|
std::vector<FileSpec> module_names;
|
|
for (I = m_rendezvous.begin(), E = m_rendezvous.end(); I != E; ++I)
|
|
module_names.push_back(I->file_spec);
|
|
m_process->PrefetchModuleSpecs(
|
|
module_names, m_process->GetTarget().GetArchitecture().GetTriple());
|
|
|
|
auto load_module_fn = [this, &module_list,
|
|
&log](const DYLDRendezvous::SOEntry &so_entry) {
|
|
ModuleSP module_sp = LoadModuleAtAddress(
|
|
so_entry.file_spec, so_entry.link_addr, so_entry.base_addr, true);
|
|
if (module_sp.get()) {
|
|
LLDB_LOG(log, "LoadAllCurrentModules loading module: {0}",
|
|
so_entry.file_spec.GetFilename());
|
|
module_list.Append(module_sp);
|
|
} else {
|
|
Log *log = GetLog(LLDBLog::DynamicLoader);
|
|
LLDB_LOGF(
|
|
log,
|
|
"DynamicLoaderPOSIXDYLD::%s failed loading module %s at 0x%" PRIx64,
|
|
__FUNCTION__, so_entry.file_spec.GetPath().c_str(),
|
|
so_entry.base_addr);
|
|
}
|
|
};
|
|
if (m_process->GetTarget().GetParallelModuleLoad()) {
|
|
llvm::ThreadPoolTaskGroup task_group(Debugger::GetThreadPool());
|
|
for (I = m_rendezvous.begin(), E = m_rendezvous.end(); I != E; ++I)
|
|
task_group.async(load_module_fn, *I);
|
|
task_group.wait();
|
|
} else {
|
|
for (I = m_rendezvous.begin(), E = m_rendezvous.end(); I != E; ++I)
|
|
load_module_fn(*I);
|
|
}
|
|
|
|
m_process->GetTarget().ModulesDidLoad(module_list);
|
|
m_initial_modules_added = true;
|
|
}
|
|
|
|
addr_t DynamicLoaderPOSIXDYLD::ComputeLoadOffset() {
|
|
addr_t virt_entry;
|
|
|
|
if (m_load_offset != LLDB_INVALID_ADDRESS)
|
|
return m_load_offset;
|
|
|
|
if ((virt_entry = GetEntryPoint()) == LLDB_INVALID_ADDRESS)
|
|
return LLDB_INVALID_ADDRESS;
|
|
|
|
ModuleSP module = m_process->GetTarget().GetExecutableModule();
|
|
if (!module)
|
|
return LLDB_INVALID_ADDRESS;
|
|
|
|
ObjectFile *exe = module->GetObjectFile();
|
|
if (!exe)
|
|
return LLDB_INVALID_ADDRESS;
|
|
|
|
Address file_entry = exe->GetEntryPointAddress();
|
|
|
|
if (!file_entry.IsValid())
|
|
return LLDB_INVALID_ADDRESS;
|
|
|
|
m_load_offset = virt_entry - file_entry.GetFileAddress();
|
|
return m_load_offset;
|
|
}
|
|
|
|
void DynamicLoaderPOSIXDYLD::EvalSpecialModulesStatus() {
|
|
if (std::optional<uint64_t> vdso_base =
|
|
m_auxv->GetAuxValue(AuxVector::AUXV_AT_SYSINFO_EHDR))
|
|
m_vdso_base = *vdso_base;
|
|
|
|
if (std::optional<uint64_t> interpreter_base =
|
|
m_auxv->GetAuxValue(AuxVector::AUXV_AT_BASE))
|
|
m_interpreter_base = *interpreter_base;
|
|
}
|
|
|
|
addr_t DynamicLoaderPOSIXDYLD::GetEntryPoint() {
|
|
if (m_entry_point != LLDB_INVALID_ADDRESS)
|
|
return m_entry_point;
|
|
|
|
if (m_auxv == nullptr)
|
|
return LLDB_INVALID_ADDRESS;
|
|
|
|
std::optional<uint64_t> entry_point =
|
|
m_auxv->GetAuxValue(AuxVector::AUXV_AT_ENTRY);
|
|
if (!entry_point)
|
|
return LLDB_INVALID_ADDRESS;
|
|
|
|
m_entry_point = static_cast<addr_t>(*entry_point);
|
|
|
|
const ArchSpec &arch = m_process->GetTarget().GetArchitecture();
|
|
|
|
// On ppc64, the entry point is actually a descriptor. Dereference it.
|
|
if (arch.GetMachine() == llvm::Triple::ppc64)
|
|
m_entry_point = ReadUnsignedIntWithSizeInBytes(m_entry_point, 8);
|
|
|
|
return m_entry_point;
|
|
}
|
|
|
|
lldb::addr_t
|
|
DynamicLoaderPOSIXDYLD::GetThreadLocalData(const lldb::ModuleSP module_sp,
|
|
const lldb::ThreadSP thread,
|
|
lldb::addr_t tls_file_addr) {
|
|
Log *log = GetLog(LLDBLog::DynamicLoader);
|
|
std::optional<addr_t> link_map_addr_opt = GetLoadedModuleLinkAddr(module_sp);
|
|
if (!link_map_addr_opt.has_value()) {
|
|
LLDB_LOGF(
|
|
log, "GetThreadLocalData error: module(%s) not found in loaded modules",
|
|
module_sp->GetObjectName().AsCString());
|
|
return LLDB_INVALID_ADDRESS;
|
|
}
|
|
|
|
addr_t link_map = link_map_addr_opt.value();
|
|
if (link_map == LLDB_INVALID_ADDRESS || link_map == 0) {
|
|
LLDB_LOGF(log,
|
|
"GetThreadLocalData error: invalid link map address=0x%" PRIx64,
|
|
link_map);
|
|
return LLDB_INVALID_ADDRESS;
|
|
}
|
|
|
|
const DYLDRendezvous::ThreadInfo &metadata = m_rendezvous.GetThreadInfo();
|
|
if (!metadata.valid) {
|
|
LLDB_LOGF(log,
|
|
"GetThreadLocalData error: fail to read thread info metadata");
|
|
return LLDB_INVALID_ADDRESS;
|
|
}
|
|
|
|
LLDB_LOGF(log,
|
|
"GetThreadLocalData info: link_map=0x%" PRIx64
|
|
", thread info metadata: "
|
|
"modid_offset=0x%" PRIx32 ", dtv_offset=0x%" PRIx32
|
|
", tls_offset=0x%" PRIx32 ", dtv_slot_size=%" PRIx32 "\n",
|
|
link_map, metadata.modid_offset, metadata.dtv_offset,
|
|
metadata.tls_offset, metadata.dtv_slot_size);
|
|
|
|
// Get the thread pointer.
|
|
addr_t tp = thread->GetThreadPointer();
|
|
if (tp == LLDB_INVALID_ADDRESS) {
|
|
LLDB_LOGF(log, "GetThreadLocalData error: fail to read thread pointer");
|
|
return LLDB_INVALID_ADDRESS;
|
|
}
|
|
|
|
// Find the module's modid.
|
|
int modid_size = 4; // FIXME(spucci): This isn't right for big-endian 64-bit
|
|
int64_t modid = ReadUnsignedIntWithSizeInBytes(
|
|
link_map + metadata.modid_offset, modid_size);
|
|
if (modid == -1) {
|
|
LLDB_LOGF(log, "GetThreadLocalData error: fail to read modid");
|
|
return LLDB_INVALID_ADDRESS;
|
|
}
|
|
|
|
// Lookup the DTV structure for this thread.
|
|
addr_t dtv_ptr = tp + metadata.dtv_offset;
|
|
addr_t dtv = ReadPointer(dtv_ptr);
|
|
if (dtv == LLDB_INVALID_ADDRESS) {
|
|
LLDB_LOGF(log, "GetThreadLocalData error: fail to read dtv");
|
|
return LLDB_INVALID_ADDRESS;
|
|
}
|
|
|
|
// Find the TLS block for this module.
|
|
addr_t dtv_slot = dtv + metadata.dtv_slot_size * modid;
|
|
addr_t tls_block = ReadPointer(dtv_slot + metadata.tls_offset);
|
|
|
|
LLDB_LOGF(log,
|
|
"DynamicLoaderPOSIXDYLD::Performed TLS lookup: "
|
|
"module=%s, link_map=0x%" PRIx64 ", tp=0x%" PRIx64
|
|
", modid=%" PRId64 ", tls_block=0x%" PRIx64 "\n",
|
|
module_sp->GetObjectName().AsCString(""), link_map, tp,
|
|
(int64_t)modid, tls_block);
|
|
|
|
if (tls_block == LLDB_INVALID_ADDRESS) {
|
|
LLDB_LOGF(log, "GetThreadLocalData error: fail to read tls_block");
|
|
return LLDB_INVALID_ADDRESS;
|
|
} else
|
|
return tls_block + tls_file_addr;
|
|
}
|
|
|
|
void DynamicLoaderPOSIXDYLD::ResolveExecutableModule(
|
|
lldb::ModuleSP &module_sp) {
|
|
Log *log = GetLog(LLDBLog::DynamicLoader);
|
|
|
|
if (m_process == nullptr)
|
|
return;
|
|
|
|
auto &target = m_process->GetTarget();
|
|
const auto platform_sp = target.GetPlatform();
|
|
|
|
ProcessInstanceInfo process_info;
|
|
if (!m_process->GetProcessInfo(process_info)) {
|
|
LLDB_LOGF(log,
|
|
"DynamicLoaderPOSIXDYLD::%s - failed to get process info for "
|
|
"pid %" PRIu64,
|
|
__FUNCTION__, m_process->GetID());
|
|
return;
|
|
}
|
|
|
|
LLDB_LOGF(
|
|
log, "DynamicLoaderPOSIXDYLD::%s - got executable by pid %" PRIu64 ": %s",
|
|
__FUNCTION__, m_process->GetID(),
|
|
process_info.GetExecutableFile().GetPath().c_str());
|
|
|
|
ModuleSpec module_spec(process_info.GetExecutableFile(),
|
|
process_info.GetArchitecture());
|
|
if (module_sp && module_sp->MatchesModuleSpec(module_spec))
|
|
return;
|
|
|
|
module_spec.SetTarget(target.shared_from_this());
|
|
const auto executable_search_paths(Target::GetDefaultExecutableSearchPaths());
|
|
auto error = platform_sp->ResolveExecutable(module_spec, module_sp);
|
|
if (error.Fail()) {
|
|
StreamString stream;
|
|
module_spec.Dump(stream);
|
|
|
|
LLDB_LOGF(log,
|
|
"DynamicLoaderPOSIXDYLD::%s - failed to resolve executable "
|
|
"with module spec \"%s\": %s",
|
|
__FUNCTION__, stream.GetData(), error.AsCString());
|
|
return;
|
|
}
|
|
|
|
target.SetExecutableModule(module_sp, eLoadDependentsNo);
|
|
}
|
|
|
|
bool DynamicLoaderPOSIXDYLD::AlwaysRelyOnEHUnwindInfo(
|
|
lldb_private::SymbolContext &sym_ctx) {
|
|
ModuleSP module_sp;
|
|
if (sym_ctx.symbol)
|
|
module_sp = sym_ctx.symbol->GetAddressRef().GetModule();
|
|
if (!module_sp && sym_ctx.function)
|
|
module_sp = sym_ctx.function->GetAddress().GetModule();
|
|
if (!module_sp)
|
|
return false;
|
|
|
|
return module_sp->GetFileSpec().GetPath() == "[vdso]";
|
|
}
|
|
|
|
bool DynamicLoaderPOSIXDYLD::IsCoreFile() const {
|
|
return !m_process->IsLiveDebugSession();
|
|
}
|
|
|
|
// For our ELF/POSIX builds save off the fs_base/gs_base regions
|
|
static void AddThreadLocalMemoryRegions(Process &process, ThreadSP &thread_sp,
|
|
std::vector<MemoryRegionInfo> &ranges) {
|
|
lldb::RegisterContextSP reg_ctx = thread_sp->GetRegisterContext();
|
|
if (!reg_ctx)
|
|
return;
|
|
|
|
const RegisterInfo *reg_info = reg_ctx->GetRegisterInfo(
|
|
lldb::RegisterKind::eRegisterKindGeneric, LLDB_REGNUM_GENERIC_TP);
|
|
if (!reg_info)
|
|
return;
|
|
|
|
lldb_private::RegisterValue thread_local_register_value;
|
|
bool success = reg_ctx->ReadRegister(reg_info, thread_local_register_value);
|
|
if (!success)
|
|
return;
|
|
|
|
const uint64_t fail_value = UINT64_MAX;
|
|
bool readSuccess = false;
|
|
const lldb::addr_t reg_value_addr =
|
|
thread_local_register_value.GetAsUInt64(fail_value, &readSuccess);
|
|
if (!readSuccess || reg_value_addr == fail_value)
|
|
return;
|
|
|
|
MemoryRegionInfo thread_local_region;
|
|
Status err = process.GetMemoryRegionInfo(reg_value_addr, thread_local_region);
|
|
if (err.Fail())
|
|
return;
|
|
|
|
ranges.push_back(thread_local_region);
|
|
}
|
|
|
|
// Save off the link map for core files.
|
|
static void AddLinkMapSections(Process &process,
|
|
std::vector<MemoryRegionInfo> &ranges) {
|
|
ModuleList &module_list = process.GetTarget().GetImages();
|
|
Target *target = &process.GetTarget();
|
|
for (size_t idx = 0; idx < module_list.GetSize(); idx++) {
|
|
ModuleSP module_sp = module_list.GetModuleAtIndex(idx);
|
|
if (!module_sp)
|
|
continue;
|
|
|
|
ObjectFile *obj = module_sp->GetObjectFile();
|
|
if (!obj)
|
|
continue;
|
|
Address addr = obj->GetImageInfoAddress(target);
|
|
addr_t load_addr = addr.GetLoadAddress(target);
|
|
if (load_addr == LLDB_INVALID_ADDRESS)
|
|
continue;
|
|
|
|
MemoryRegionInfo link_map_section;
|
|
Status err = process.GetMemoryRegionInfo(load_addr, link_map_section);
|
|
if (err.Fail())
|
|
continue;
|
|
|
|
ranges.push_back(link_map_section);
|
|
}
|
|
}
|
|
|
|
void DynamicLoaderPOSIXDYLD::CalculateDynamicSaveCoreRanges(
|
|
lldb_private::Process &process,
|
|
std::vector<lldb_private::MemoryRegionInfo> &ranges,
|
|
llvm::function_ref<bool(const lldb_private::Thread &)>
|
|
save_thread_predicate) {
|
|
ThreadList &thread_list = process.GetThreadList();
|
|
for (size_t idx = 0; idx < thread_list.GetSize(); idx++) {
|
|
ThreadSP thread_sp = thread_list.GetThreadAtIndex(idx);
|
|
if (!thread_sp)
|
|
continue;
|
|
|
|
if (!save_thread_predicate(*thread_sp))
|
|
continue;
|
|
|
|
AddThreadLocalMemoryRegions(process, thread_sp, ranges);
|
|
}
|
|
|
|
AddLinkMapSections(process, ranges);
|
|
}
|