mandelbrot fractal.

fpga.pio

@@ -44,11 +44,11 @@ set pindirs, 0b01   ; ...
 wait 1 gpio REQ_PIN ; wait for data to be ready, indicated by req signal high
 
 .wrap_target
-wait 1 gpio CLK_PIN ; synchronize
-wait 0 gpio CLK_PIN ; synchronize
 in pins, 8          ; read data from pins
 push noblock        ; write data to memory
+wait 0 gpio CLK_PIN ; synchronize
 jmp pin start       ; stop receiving data if FPGA is done
+wait 1 gpio CLK_PIN ; synchronize
 .wrap               ; otherwise keep receiving data
 
 % c-sdk {

ice/coords.sv

@@ -1,34 +1,36 @@
 module coords
 #(
-	parameter WIDTH = 128,
+	parameter WIDTH = 256,
-	parameter HEIGHT = 128,
+	parameter HEIGHT = 256,
 	parameter POS_COUNT = 4,
 	localparam WIDTH_BITS = $clog2(WIDTH),
 	localparam HEIGHT_BITS = $clog2(HEIGHT)
 )(
 	input wire clk,
 	input wire rst,
+	input wire inc,
 	output reg [WIDTH_BITS-1:0] x[POS_COUNT],
-	output reg [WIDTH_BITS-1:0] y[POS_COUNT],
+	output reg [HEIGHT_BITS-1:0] y[POS_COUNT],
 	output wire finished
 );
 
 reg [POS_COUNT-1:0] finished_r;
 
 always_ff @(posedge clk) begin
-	integer i;
 	if (rst) begin
+		integer i;
 		for (i = 0; i < POS_COUNT; i = i + 1) begin
 			x[i] <= WIDTH_BITS'(i);
 			y[i] <= 0;
 		end
 		finished_r <= '1;
-	end else begin
+	end else if (inc) begin
+		integer i;
 		for (i = 0; i < POS_COUNT; i = i + 1) begin
-			x[i] <= WIDTH_BITS'((32'(x[i]) + POS_COUNT) % WIDTH);
+			x[i] <= x[i] + POS_COUNT;
-			if (x[i] > WIDTH_BITS'((32'(x[i]) + POS_COUNT) % WIDTH)) begin
+			if (32'(x[i]) > (32'(x[i]) + POS_COUNT) % WIDTH) begin
 				y[i] <= y[i] + 1;
-				if (y[i] > HEIGHT_BITS'((32'(y[i]) + 1) % HEIGHT)) begin
+				if (32'(y[i]) > (32'(y[i]) + 1) % HEIGHT) begin
 					finished_r[i] <= 0;
 				end
 			end

ice/mandelbrot/.ng_run_manager.ini

@@ -1,6 +1,6 @@
 [Runmanager]
 Geometry=@ByteArray(\x1\xd9\xd0\xcb\0\x3\0\0\0\0\0\0\0\0\0\x14\0\0\x1\xca\0\0\0\xb9\0\0\0\0\0\0\0\x14\0\0\x1\xca\0\0\0\xb9\0\0\0\0\0\0\0\0\n\0\0\0\0\0\0\0\0\x14\0\0\x1\xca\0\0\0\xb9)
-headerState=@ByteArray(\0\0\0\xff\0\0\0\0\0\0\0\x1\0\0\0\x1\0\0\0\0\x1\0\0\0\0\0\0\0\0\0\0\0\x15\0\xf0\x1f\0\0\0\t\0\0\0\x13\0\0\0\x64\0\0\0\x12\0\0\0\x64\0\0\0\x14\0\0\0\x64\0\0\0\r\0\0\0\x64\0\0\0\f\0\0\0\x64\0\0\0\xf\0\0\0\x64\0\0\0\xe\0\0\0\x64\0\0\0\x11\0\0\0\x64\0\0\0\x10\0\0\0\x64\0\0\x5\xf\0\0\0\x15\x1\x1\0\x1\0\0\0\0\0\0\0\0\0\0\0\0\x64\xff\xff\xff\xff\0\0\0\x84\0\0\0\0\0\0\0\x15\0\0\0\xc3\0\0\0\x1\0\0\0\0\0\0\0\x64\0\0\0\x1\0\0\0\0\0\0\0\x64\0\0\0\x1\0\0\0\0\0\0\0\x64\0\0\0\x1\0\0\0\0\0\0\0\x64\0\0\0\x1\0\0\0\0\0\0\0\x64\0\0\0\x1\0\0\0\0\0\0\0\x64\0\0\0\x1\0\0\0\0\0\0\0\x64\0\0\0\x1\0\0\0\0\0\0\0\x64\0\0\0\x1\0\0\0\0\0\0\0\x64\0\0\0\x1\0\0\0\0\0\0\0\x64\0\0\0\x1\0\0\0\0\0\0\0\x64\0\0\0\x1\0\0\0\0\0\0\0\0\0\0\0\x1\0\0\0\0\0\0\0\0\0\0\0\x1\0\0\0\0\0\0\0\0\0\0\0\x1\0\0\0\0\0\0\0\0\0\0\0\x1\0\0\0\0\0\0\0\0\0\0\0\x1\0\0\0\0\0\0\0\0\0\0\0\x1\0\0\0\0\0\0\0\0\0\0\0\x1\0\0\0\0\0\0\0\0\0\0\0\x1\0\0\0\0\0\0\0\0\0\0\0\x1\0\0\0\0\0\0\x3\xe8\0\0\0\0\x64)
+headerState=@ByteArray(\0\0\0\xff\0\0\0\0\0\0\0\x1\0\0\0\x1\0\0\0\0\x1\0\0\0\0\0\0\0\0\0\0\0\x15\0\xf0\x1f\0\0\0\t\0\0\0\xe\0\0\0\x64\0\0\0\xf\0\0\0\x64\0\0\0\f\0\0\0\x64\0\0\0\r\0\0\0\x64\0\0\0\x12\0\0\0\x64\0\0\0\x13\0\0\0\x64\0\0\0\x10\0\0\0\x64\0\0\0\x11\0\0\0\x64\0\0\0\x14\0\0\0\x64\0\0\x5\xf\0\0\0\x15\x1\x1\0\x1\0\0\0\0\0\0\0\0\0\0\0\0\x64\xff\xff\xff\xff\0\0\0\x84\0\0\0\0\0\0\0\x15\0\0\0\xc3\0\0\0\x1\0\0\0\0\0\0\0\x64\0\0\0\x1\0\0\0\0\0\0\0\x64\0\0\0\x1\0\0\0\0\0\0\0\x64\0\0\0\x1\0\0\0\0\0\0\0\x64\0\0\0\x1\0\0\0\0\0\0\0\x64\0\0\0\x1\0\0\0\0\0\0\0\x64\0\0\0\x1\0\0\0\0\0\0\0\x64\0\0\0\x1\0\0\0\0\0\0\0\x64\0\0\0\x1\0\0\0\0\0\0\0\x64\0\0\0\x1\0\0\0\0\0\0\0\x64\0\0\0\x1\0\0\0\0\0\0\0\x64\0\0\0\x1\0\0\0\0\0\0\0\0\0\0\0\x1\0\0\0\0\0\0\0\0\0\0\0\x1\0\0\0\0\0\0\0\0\0\0\0\x1\0\0\0\0\0\0\0\0\0\0\0\x1\0\0\0\0\0\0\0\0\0\0\0\x1\0\0\0\0\0\0\0\0\0\0\0\x1\0\0\0\0\0\0\0\0\0\0\0\x1\0\0\0\0\0\0\0\0\0\0\0\x1\0\0\0\0\0\0\0\0\0\0\0\x1\0\0\0\0\0\0\x3\xe8\0\0\0\0\x64)
 
 [impl_1%3CStrategy1%3E]
 isChecked=false

ice/mandelbrot/.recovery

@@ -18,6 +18,9 @@
         <Source name="source/impl_1/multiplier.sv" type="Verilog" type_short="Verilog">
             <Options VerilogStandard="System Verilog"/>
         </Source>
+        <Source name="../spram.sv" type="Verilog" type_short="Verilog">
+            <Options VerilogStandard="System Verilog"/>
+        </Source>
         <Source name="../constraints.pdc" type="Physical Constraints File" type_short="PDC">
             <Options/>
         </Source>

ice/mandelbrot/mandelbrot.rdf

@@ -2,7 +2,7 @@
 <RadiantProject version="4.2" radiant="2024.1.0.34.2" title="mandelbrot" device="iCE40UP5K-SG48I" performance_grade="High-Performance_1.2V" family_int="ice40tp" device_int="itpa08" package_int="SG48" operation_int="IND" speed_int="6" default_implementation="impl_1">
     <Options/>
     <Implementation title="impl_1" dir="impl_1" description="impl_1" synthesis="synplify" default_strategy="Strategy1">
-        <Options def_top="renderer" top="top"/>
+        <Options def_top="top" top="top"/>
         <Source name="source/impl_1/top.sv" type="Verilog" type_short="Verilog">
             <Options VerilogStandard="System Verilog" top_module="top"/>
         </Source>

ice/mandelbrot/mandelbrot_tcl.html

@@ -275,6 +275,32 @@ prj_add_source "C:/Users/fuzzc/Documents/Hardware/pico-ice/pico-ice-video/ice/ma
 
 
 
+<A name="pn241008133909"></A><B><U><big>pn241008133909</big></U></B>
+#Start recording tcl command: 10/7/2024 10:43:02
+#Project Location: C:/Users/fuzzc/Documents/Hardware/pico-ice/pico-ice-video/ice/mandelbrot; Project name: mandelbrot
+prj_open "C:/Users/fuzzc/Documents/Hardware/pico-ice/pico-ice-video/ice/mandelbrot/mandelbrot.rdf"
+prj_run PAR -impl impl_1
+prj_run Export -impl impl_1
+prj_run PAR -impl impl_1
+prj_run Export -impl impl_1
+prj_run PAR -impl impl_1
+prj_run Export -impl impl_1
+prj_run PAR -impl impl_1
+prj_run Export -impl impl_1
+prj_run PAR -impl impl_1
+prj_run Export -impl impl_1
+prj_run PAR -impl impl_1
+prj_run Export -impl impl_1
+prj_run PAR -impl impl_1
+prj_run Export -impl impl_1
+prj_run PAR -impl impl_1
+prj_run Export -impl impl_1
+prj_run PAR -impl impl_1
+prj_run Export -impl impl_1
+#Stop recording: 10/8/2024 13:39:09
+
+
+
 </PRE></DIV>
 
 <DIV id="toc" class="radiant"><span onmousemove="showTocList()">Contents</span>
@@ -284,6 +310,7 @@ prj_add_source "C:/Users/fuzzc/Documents/Hardware/pico-ice/pico-ice-video/ice/ma
 <LI><A href=#pn241003133906>pn241003133906</A></LI>
 <LI><A href=#pn241004114221>pn241004114221</A></LI>
 <LI><A href=#pn241004151504>pn241004151504</A></LI>
+<LI><A href=#pn241008133909>pn241008133909</A></LI>
 </UL>
 </DIV>
 

ice/mandelbrot/mandelbrot_tcr.dir/pn241008133909.tcr

@@ -0,0 +1,22 @@
+#Start recording tcl command: 10/7/2024 10:43:02
+#Project Location: C:/Users/fuzzc/Documents/Hardware/pico-ice/pico-ice-video/ice/mandelbrot; Project name: mandelbrot
+prj_open "C:/Users/fuzzc/Documents/Hardware/pico-ice/pico-ice-video/ice/mandelbrot/mandelbrot.rdf"
+prj_run PAR -impl impl_1
+prj_run Export -impl impl_1
+prj_run PAR -impl impl_1
+prj_run Export -impl impl_1
+prj_run PAR -impl impl_1
+prj_run Export -impl impl_1
+prj_run PAR -impl impl_1
+prj_run Export -impl impl_1
+prj_run PAR -impl impl_1
+prj_run Export -impl impl_1
+prj_run PAR -impl impl_1
+prj_run Export -impl impl_1
+prj_run PAR -impl impl_1
+prj_run Export -impl impl_1
+prj_run PAR -impl impl_1
+prj_run Export -impl impl_1
+prj_run PAR -impl impl_1
+prj_run Export -impl impl_1
+#Stop recording: 10/8/2024 13:39:09

ice/mandelbrot/promote.xml

@@ -1,3 +1,3 @@
 <?xml version="1.0" encoding="UTF-8"?>
-<userSetting name="C:/Users/fuzzc/Documents/Hardware/pico-ice/pico-ice-video/ice/mandelbrot/promote.xml" version="Diamond (64-bit) 2024.1.0.34.2" date="Sun Oct 06 00:16:13 2024" vendor="Lattice Semiconductor Corporation" >
+<userSetting name="C:/Users/fuzzc/Documents/Hardware/pico-ice/pico-ice-video/ice/mandelbrot/promote.xml" version="Diamond (64-bit) 2024.1.0.34.2" date="Wed Oct 09 15:10:53 2024" vendor="Lattice Semiconductor Corporation" >
 </userSetting>

ice/mandelbrot/source/impl_1/makefile

@@ -1,6 +1,18 @@
+VFLAGS = -O3 -x-assign fasta --x-initial fast --noassert
+SDL_CFLAGS = `sdl2-config --cflags`
+SDL_LDFLAGS = `sdl2-config --libs`
+
 run: build
-	cd obj_dir && ./Vtop && gtkwave waveform.vcd
+	cd obj_dir && ./Vtop
+
+wave: run
+	gtkwave obj_dir/waveform.vcd
 
 build:
-	verilator --trace --cc top.sv --exe tb_top.cpp -I../../..
+	verilator --cc top.sv --trace --exe tb_top.cpp -I../../.. -CFLAGS "${SDL_CFLAGS}" -LDFLAGS "${SDL_LDFLAGS}"
 	make -C obj_dir -f Vtop.mk Vtop
+
+clean:
+	rm -rf ./obj_dir
+
+.PHONY: run wave build clean

ice/mandelbrot/source/impl_1/multiplier.sv

@@ -1,22 +1,11 @@
 module multiplier
 (
 	input wire clk,
-	input wire signed [7:0] a,
+	input wire signed [15:0] a,
-	input wire signed [7:0] b,
+	input wire signed [15:0] b,
-	output reg signed [15:0] product
+	output wire signed [31:0] product
 );
 
-reg signed [7:0] a_reg;
+assign product = a * b;
-reg signed [7:0] b_reg;
-
-wire [15:0] product_out;
-
-always_ff @(posedge clk) begin
-	a_reg <= a;
-	b_reg <= b;
-	product <= product_out;
-end
-
-assign product_out = a_reg * b_reg;
 
 endmodule

ice/mandelbrot/source/impl_1/renderer.sv

@@ -1,72 +1,89 @@
 module renderer
 #(
-	parameter ITERATIONS = 7,
+	parameter ITERATIONS = 127,
-	parameter OUTPUT_WIDTH = 3,
+	parameter OUTPUT_WIDTH = 7,
 	localparam ITERATION_WIDTH = $clog2(ITERATIONS + 1),
-	localparam SHIFT_AMOUNT = ITERATION_WIDTH - OUTPUT_WIDTH
+	localparam SHIFT_AMOUNT = ITERATION_WIDTH - OUTPUT_WIDTH,
+	localparam FRACTION_BITS = 13
 )(
 	input wire clk,
 	input wire rst,
 	input wire start,
-	input wire signed [7:0] x,
+	input wire [7:0] x,
-	input wire signed [7:0] y,
+	input wire [7:0] y,
+	input wire signed [14:0] cx,
+	input wire signed [14:0] cy,
+	input wire [2:0] zoom,
 	output reg done,
 	output reg [OUTPUT_WIDTH-1:0] iters
 );
 
-reg signed [7:0] x_reg;
+reg signed [15:0] x_reg;
-reg signed [7:0] y_reg;
+reg signed [15:0] y_reg;
-reg signed [7:0] z_real;
+reg signed [15:0] z_real;
-reg signed [7:0] z_imag;
+reg signed [15:0] z_imag;
 reg [ITERATION_WIDTH-1:0] current_iteration;
 
-wire signed [15:0] a_squared_p;
+wire signed [31:0] a_squared_p;
-wire signed [15:0] b_squared_p;
+wire signed [31:0] b_squared_p;
-wire signed [15:0] ab_p;
+wire signed [31:0] ab_p;
 
-wire signed [7:0] a_squared;
+wire signed [31:0] apb_squared;
-wire signed [7:0] b_squared;
+wire signed [31:0] asb_squared;
-wire signed [7:0] ab;
+
+wire signed [31:0] ab;
 
 always_ff @(posedge clk) begin
-	current_iteration <= current_iteration + 1'b1;
 	done <= 1'b0;
 	
-	// 128 = 4 << FRACTION_BITS (4)
+	if (current_iteration == ITERATIONS) begin
-	if (current_iteration == ITERATIONS || a_squared + b_squared >= 32) begin
 		x_reg <= '0;
 		y_reg <= '0;
 		
 		z_real <= '0;
 		z_imag <= '0;
 		
-		iters <= current_iteration >> SHIFT_AMOUNT;
 		current_iteration <= '0;
+		iters <= '0;
+		
+		done <= 1'b1;
+	end else if (apb_squared >= 32'h4 << (2 * FRACTION_BITS)) begin
+		x_reg <= '0;
+		y_reg <= '0;
+		
+		z_real <= '0;
+		z_imag <= '0;
+		
+		current_iteration <= '0;
+		iters <= OUTPUT_WIDTH'(current_iteration >> SHIFT_AMOUNT);
 		
 		done <= 1'b1;
 	end else if (current_iteration == 0) begin
 		// store c for later
-		x_reg <= x;
+		x_reg <= cx + (16'(x) << zoom) + 16'hC000;
-		y_reg <= y;
+		y_reg <= cy + (16'(y) << zoom) + 16'hC000;
 		
 		// add c for first iteration.
 		// no need to include z as it is initially (0, 0)
-		z_real <= x;
+		z_real <= cx + (16'(x) << zoom) + 16'hC000;
-		z_imag <= y;
+		z_imag <= cy + (16'(y) << zoom) + 16'hC000;
 		
 		if (!start) begin
 			current_iteration <= '0;
+		end else begin	
+			current_iteration <= current_iteration + 1'b1;
 		end
 	end else begin
-		z_real <= a_squared + b_squared + x_reg;
+		z_real <= asb_squared[15+FRACTION_BITS:FRACTION_BITS] + x_reg;
-		z_imag <= (ab << 1'b1) + y_reg;
+		z_imag <= ab[15+FRACTION_BITS:FRACTION_BITS] + y_reg;
+		current_iteration <= current_iteration + 1'b1;
 	end
 	
 	if (rst) begin
-		x_reg <= 8'h00;
+		x_reg <= '0;
-		y_reg <= 8'h00;
+		y_reg <= '0;
-		z_real <= 8'h00;
+		z_real <= '0;
-		z_imag <= 8'h00;
+		z_imag <= '0;
 		current_iteration <= '0;
 	end
 end
@@ -75,8 +92,8 @@ multiplier m1(.clk(clk), .a(z_real), .b(z_real), .product(a_squared_p));
 multiplier m2(.clk(clk), .a(z_imag), .b(z_imag), .product(b_squared_p));
 multiplier m3(.clk(clk), .a(z_real), .b(z_imag), .product(ab_p));
 
-assign a_squared = a_squared_p[11:4];
+assign apb_squared = a_squared_p + b_squared_p;
-assign b_squared = b_squared_p[11:4];
+assign asb_squared = a_squared_p - b_squared_p;
-assign ab = ab_p[11:4];
+assign ab = ab_p << 1'b1;
 
 endmodule

ice/mandelbrot/source/impl_1/tb_top.cpp

@@ -1,32 +1,172 @@
 #include <cstdlib>
+#include <cmath>
 #include <iostream>
+#include <SDL.h>
 #include <verilated.h>
 #include <verilated_vcd_c.h>
 #include "Vtop.h"
 
-constexpr vluint64_t MAX_SIM_TIME = 100000;
+constexpr int H_RES = 256;
-vluint64_t sim_time = 0;
+constexpr int V_RES = 256;
+
+constexpr int S_SCALE = 3;
 
 int main(int argc, char** argv, char** env)
 {
+	if (SDL_Init(SDL_INIT_VIDEO) < 0)
+	{
+		std::cout << "SDL init failed." << std::endl;
+		return 1;
+	}
+
+	uint8_t framebuffer[H_RES * V_RES * 2];
+	unsigned int current = 0;
+
+	SDL_Window* sdl_window = nullptr;
+	SDL_Renderer* sdl_renderer = nullptr;
+	SDL_Texture* sdl_texture = nullptr;
+
+	sdl_window = SDL_CreateWindow("mandelbrot", SDL_WINDOWPOS_CENTERED, SDL_WINDOWPOS_CENTERED,
+		H_RES * S_SCALE, V_RES * S_SCALE, SDL_WINDOW_SHOWN);
+	if (!sdl_window)
+	{
+		std::cout << "Window creation failed: " << SDL_GetError() << std::endl;
+		return 1;
+	}
+
+	sdl_renderer = SDL_CreateRenderer(sdl_window, -1, SDL_RENDERER_ACCELERATED | SDL_RENDERER_PRESENTVSYNC);
+	if (!sdl_renderer)
+	{
+		std::cout << "Renderer creation failed: " << SDL_GetError() << std::endl;
+		return 1;
+	}
+	SDL_RenderSetLogicalSize(sdl_renderer, V_RES, H_RES);
+
+	sdl_texture = SDL_CreateTexture(sdl_renderer, SDL_PIXELFORMAT_YUY2, SDL_TEXTUREACCESS_TARGET, H_RES, V_RES);
+	if (!sdl_texture)
+	{
+		std::cout << "Texture creation failed: " << SDL_GetError() << std::endl;
+		return 1;
+	}
+
+	const Uint8* keyb_state = SDL_GetKeyboardState(nullptr);
+
 	Vtop* dut = new Vtop;
 
+	bool done = false;
+
+	vluint64_t sim_time = 0;
+
 	Verilated::traceEverOn(true);
-	VerilatedVcdC* m_trace = new VerilatedVcdC;
+	VerilatedVcdC* trace = new VerilatedVcdC;
-	dut->trace(m_trace, 5);
+	dut->trace(trace, 5);
-	m_trace->open("waveform.vcd");
+	trace->open("waveform.vcd");
 
-	while (sim_time < MAX_SIM_TIME)
+	dut->dir = 1;
-	{
+	dut->clk = 1;
-		dut->clk ^= 1;
 	dut->eval();
-		m_trace->dump(sim_time);
+	trace->dump(sim_time++);
+	dut->clk = 0;
+	dut->eval();
+	trace->dump(sim_time++);
+	for (int i = 0; i < 5; i++)
+	{
+		dut->clk = 1;
+		dut->eval();
+		trace->dump(sim_time++);
+		dut->clk = 0;
+		dut->eval();
+		trace->dump(sim_time++);
+	}
+	dut->clk = 1;
+	dut->eval();
+	trace->dump(sim_time++);
+	dut->dir = 0;
+	dut->clk = 0;
+	dut->eval();
+	trace->dump(sim_time++);
 
-		sim_time++;
+	bool swapped = false;
+	bool last = false;
+
+	while (true)
+	{
+		SDL_Event e;
+		if (SDL_PollEvent(&e)) { if (e.type == SDL_QUIT) { break; } }
+
+		if (keyb_state[SDL_SCANCODE_Q]) { break; }
+
+		if (!done || !dut->fin)
+		{
+			dut->clk = 1;
+			dut->eval();
+			trace->dump(sim_time++);
+			dut->clk = 0;
+			dut->eval();
+			trace->dump(sim_time++);
+
+			if (!dut->req || done) { continue; }
+
+			framebuffer[current] = dut->data;
+
+			if (++current == H_RES * V_RES * 2)
+			{
+				current = 0;
+				SDL_UpdateTexture(sdl_texture, nullptr, framebuffer, H_RES * 2);
+				SDL_RenderClear(sdl_renderer);
+				SDL_RenderCopy(sdl_renderer, sdl_texture, nullptr, nullptr);
+				SDL_RenderPresent(sdl_renderer);
+
+				done = true;
+			}
+		}
+		else if (keyb_state[SDL_SCANCODE_N] && !last)
+		{
+			if (swapped)
+			{
+				SDL_UpdateTexture(sdl_texture, nullptr, framebuffer, H_RES * 2);
+				SDL_RenderClear(sdl_renderer);
+				SDL_RenderCopy(sdl_renderer, sdl_texture, nullptr, nullptr);
+				SDL_RenderPresent(sdl_renderer);
+				swapped = false;
+			}
+			else
+			{
+				uint8_t fb2[V_RES * H_RES * 2];
+				for (int i = 0; i < V_RES * H_RES * 2; i += 2)
+				{
+					float zr = 0, zi = 0;
+					const float cr = (i % (H_RES * 2)) / 192.0f - 2.1f;
+					const float ci = (i / (H_RES * 2)) / 96.0f - 1.5f;
+
+					fb2[i] = 62;
+					fb2[i + 1] = 128;
+
+					for (int iter = 0; iter < 64; iter++)
+					{
+						if (zr * zr + zi * zi >= 4)
+						{
+							fb2[i] = 16.0f * sqrt(iter) + 62;
+							break;
+						}
+						float tzr = zr * zr - zi * zi + cr;
+						zi = 2 * zr * zi + ci;
+						zr = tzr;
+					}
+				}
+				SDL_UpdateTexture(sdl_texture, nullptr, fb2, H_RES * 2);
+				SDL_RenderClear(sdl_renderer);
+				SDL_RenderCopy(sdl_renderer, sdl_texture, nullptr, nullptr);
+				SDL_RenderPresent(sdl_renderer);	
+				
+				swapped = true;	
+			}
+		}
+		last = keyb_state[SDL_SCANCODE_N];
 	}
 
-	m_trace->close();
+	trace->close();
-	delete m_trace;
+	delete trace;
 	delete dut;
-	return EXIT_SUCCESS;
+	return 0;
 }

ice/mandelbrot/source/impl_1/top.sv

@@ -7,14 +7,8 @@ module top
 	inout wire [7:0] data
 );
 
-reg [3:0] clk_div_8_counter;
-wire clk_div_8;
-
-reg dir_last;
 reg req_last;
 
-reg req_r;
-
 reg [7:0] waddr;
 reg [7:0] raddr;
 
@@ -22,48 +16,66 @@ wire [7:0] command;
 
 ram command_buffer(.wclk(clk), .rclk(clk), .waddr(waddr), .raddr(raddr), .data_in(data), .write_en(dir && req), .data_out(command));
 
-wire [6:0] x[4];
+wire [6:0] iters;
-wire [6:0] y[4];
 
-coords #(.POS_COUNT(4)) coords_inst(.clk(clk_div_8), .rst(!req_r), .x(x), .y(y), .finished(fin));
+wire [7:0] x[1];
+wire [7:0] y[1];
 
-wire [2:0] iters[4];
+wire coords_fin;
+wire coords_inc;
 
-wire [7:0] data_out;
+reg coords_inc_last;
+reg coords_fin_last;
 
-genvar i;
+renderer r(.clk(clk), .rst(dir), .start(!dir && !coords_fin), .x(x[0]), .y(y[0]), .cx(16'h1000), .cy(16'h2000), .zoom(3'd6), .done(coords_inc), .iters(iters)); 
-generate
+coords #(.POS_COUNT(1)) coords_inst(.clk(clk), .rst(dir), .inc(coords_inc), .x(x), .y(y), .finished(coords_fin));
-	for (i = 0; i < 4; i = i + 1) begin
+
-		renderer r(.clk(clk), .rst(dir), .start(clk_div_8_counter[2:0] >> 1 == i), .x({x[i], 1'b0}), .y({y[i], 1'b0}), .done(), .iters(iters[i]));
+wire fb_clk;
-	end
+reg [15:0] fb_addr;
-endgenerate
+wire [7:0] fb_data_in;
+wire fb_we;
+
+wire [15:0] fb_data_out;
+
+reg fb_half_out;
+
+spram_big fb(.clk(fb_clk), .we({ fb_we, fb_we, fb_we, fb_we }), .addr(fb_addr), .data_in({ 8'd128, 8'(iters) + 8'd62 }), .data_out(fb_data_out));
 
 always_ff @(posedge clk) begin
-	dir_last <= dir;
 	req_last <= req;
-	req_r <= !fin && !dir_last;
+	coords_fin_last <= coords_fin && !dir;
+	coords_inc_last <= coords_inc && !dir;
 	
 	if (dir) begin
-		clk_div_8_counter <= 0;
 		raddr <= 0;
+		fb_addr <= 0;
+		fb_half_out <= 0;
 		
 		if (req && req_last) begin
 			waddr <= waddr + 1;
 		end else begin
 			waddr <= 0;
 		end
+	end else if (coords_fin) begin
+		if (!coords_fin_last) begin
+			fb_addr <= 0;
+			fb_half_out <= 0;
+		end else begin
+			fb_half_out <= !fb_half_out;
+			if (fb_half_out) begin
+				fb_addr <= fb_addr + 1;
 			end
-	
+		end
-	if (!dir && !dir_last) begin
+	end else if (coords_inc_last) begin
-		clk_div_8_counter <= clk_div_8_counter + 1;
+		fb_addr <= fb_addr + 1;
 	end
 end
 
-assign clk_div_8 = clk_div_8_counter[3];
+assign fb_clk = clk;
+assign fb_we = coords_inc;
+assign fin = !dir && coords_fin && coords_fin_last && fb_addr >= 65531;
 
-assign data_out = clk_div_8_counter[0] ? 128 : ((8'(iters[clk_div_8_counter[2:1]]) << 4) + 8'd62);
+assign req = dir ? 'Z : coords_fin_last;
-
+assign data = dir ? 'Z : (fb_half_out ? fb_data_out[15:8] : fb_data_out[7:0]);
-assign req = dir ? 'Z : req_r;
-assign data = dir ? 'Z : data_out;
 
 endmodule

ice/spram.sv

@@ -0,0 +1,34 @@
+module spram
+(
+	input wire clk,
+	input wire [3:0] we,
+	input wire [13:0] addr,
+	input wire [15:0] data_in,
+	output wire [15:0] data_out
+);
+
+SP256K bb_spram_inst(.AD(addr), .DI(data_in), .MASKWE(we), .WE(|we), .CS('1), .CK(clk), .STDBY('0), .SLEEP('0), .PWROFF_N('1), .DO(data_out));
+
+endmodule
+
+module spram_big
+(
+	input wire clk,
+	input wire [3:0] we,
+	input wire [15:0] addr,
+	input wire [15:0] data_in,
+	output wire [15:0] data_out
+);
+
+wire [15:0] datas_out[4];
+
+genvar i;
+generate
+	for (i = 0; i < 4; i = i + 1) begin
+		spram spram_inst(.clk(clk), .we(addr[15:14] == i ? we : '0), .addr(addr[13:0]), .data_in(data_in), .data_out(datas_out[i]));
+	end
+endgenerate
+
+assign data_out = datas_out[addr[15:14]];
+
+endmodule

main.cpp

@@ -50,12 +50,18 @@ int main()
 		board_init_after_tusb();
 	}
 
-	start_next_frame();
-
 	while (true)
 	{
-		printf("%d %d |", command_buffer[0], command_buffer[1]);
+		uint8_t val = 0;
-		for (int i = 0; i < 8; i++) { printf(" %d", gpio_get(i)); }
+		for (int i = 0; i < 8; i++)
+		{
+			val |= gpio_get(i) << i;
+		}
+		printf("%d %d %d | %3d |", gpio_get(DIR_PIN), gpio_get(REQ_PIN), gpio_get(FIN_PIN), val);
+		for (int i = 0; i < 12; i++)
+		{
+			printf(" %3d", frame_buffer[i]);
+		}
 		printf("\n");
 		tud_task();
 		video_task();

tusb_config.h

@@ -72,8 +72,8 @@
 #define CFG_TUD_VIDEO_STREAMING_EP_BUFSIZE 1023
 #define CFG_TUD_VIDEO_STREAMING_BULK 0
 
-#define FRAME_WIDTH 128
+#define FRAME_WIDTH 256
-#define FRAME_HEIGHT 128
+#define FRAME_HEIGHT 256
 #define FRAME_RATE 60
 
 // Temporarily here until ice_usb.h has necessary info