|
GLM
0.9.5
|
Functions | |
| GLM_FUNC_DECL uint32 | packF2x11_1x10 (vec3 const &v) |
| GLM_FUNC_DECL uint16 | packHalf1x16 (float const &v) |
| GLM_FUNC_DECL uint64 | packHalf4x16 (vec4 const &v) |
| GLM_FUNC_DECL uint32 | packI3x10_1x2 (ivec4 const &v) |
| GLM_FUNC_DECL uint16 | packSnorm1x16 (float v) |
| GLM_FUNC_DECL uint8 | packSnorm1x8 (float const &s) |
| GLM_FUNC_DECL uint16 | packSnorm2x8 (vec2 const &v) |
| GLM_FUNC_DECL uint32 | packSnorm3x10_1x2 (vec4 const &v) |
| GLM_FUNC_DECL uint64 | packSnorm4x16 (vec4 const &v) |
| GLM_FUNC_DECL uint32 | packU3x10_1x2 (uvec4 const &v) |
| GLM_FUNC_DECL uint16 | packUnorm1x16 (float v) |
| GLM_FUNC_DECL uint8 | packUnorm1x8 (float const &v) |
| GLM_FUNC_DECL uint16 | packUnorm2x8 (vec2 const &v) |
| GLM_FUNC_DECL uint32 | packUnorm3x10_1x2 (vec4 const &v) |
| GLM_FUNC_DECL uint64 | packUnorm4x16 (vec4 const &v) |
| GLM_FUNC_DECL vec3 | unpackF2x11_1x10 (uint32 const &p) |
| GLM_FUNC_DECL float | unpackHalf1x16 (uint16 const &v) |
| GLM_FUNC_DECL vec4 | unpackHalf4x16 (uint64 const &p) |
| GLM_FUNC_DECL ivec4 | unpackI3x10_1x2 (uint32 const &p) |
| GLM_FUNC_DECL float | unpackSnorm1x16 (uint16 p) |
| GLM_FUNC_DECL float | unpackSnorm1x8 (uint8 p) |
| GLM_FUNC_DECL vec2 | unpackSnorm2x8 (uint16 p) |
| GLM_FUNC_DECL vec4 | unpackSnorm3x10_1x2 (uint32 const &p) |
| GLM_FUNC_DECL vec4 | unpackSnorm4x16 (uint64 const &p) |
| GLM_FUNC_DECL uvec4 | unpackU3x10_1x2 (uint32 const &p) |
| GLM_FUNC_DECL float | unpackUnorm1x16 (uint16 p) |
| GLM_FUNC_DECL float | unpackUnorm1x8 (uint8 pdf) |
| GLM_FUNC_DECL vec2 | unpackUnorm2x8 (uint16 p) |
| GLM_FUNC_DECL vec4 | unpackUnorm3x10_1x2 (uint32 const &p) |
| GLM_FUNC_DECL vec4 | unpackUnorm4x16 (uint64 const &p) |
This extension provides a set of function to convert vertors to packed formats.
<glm/gtc/packing.hpp> need to be included to use these features.
| GLM_FUNC_DECL uint32 glm::packF2x11_1x10 | ( | vec3 const & | v | ) |
First, converts the first two components of the normalized floating-point value v into 11-bit signless floating-point values.
Then, converts the third component of the normalized floating-point value v into a 10-bit signless floating-point value. Then, the results are packed into the returned 32-bit unsigned integer.
The first vector component specifies the 11 least-significant bits of the result; the last component specifies the 10 most-significant bits.
| GLM_FUNC_DECL uint16 glm::packHalf1x16 | ( | float const & | v | ) |
Returns an unsigned integer obtained by converting the components of a floating-point scalar to the 16-bit floating-point representation found in the OpenGL Specification, and then packing this 16-bit value into a 16-bit unsigned integer.
| GLM_FUNC_DECL uint64 glm::packHalf4x16 | ( | vec4 const & | v | ) |
Returns an unsigned integer obtained by converting the components of a four-component floating-point vector to the 16-bit floating-point representation found in the OpenGL Specification, and then packing these four 16-bit values into a 64-bit unsigned integer.
The first vector component specifies the 16 least-significant bits of the result; the forth component specifies the 16 most-significant bits.
| GLM_FUNC_DECL uint32 glm::packI3x10_1x2 | ( | ivec4 const & | v | ) |
Returns an unsigned integer obtained by converting the components of a four-component signed integer vector to the 10-10-10-2-bit signed integer representation found in the OpenGL Specification, and then packing these four values into a 32-bit unsigned integer.
The first vector component specifies the 10 least-significant bits of the result; the forth component specifies the 2 most-significant bits.
| GLM_FUNC_DECL uint16 glm::packSnorm1x16 | ( | float | v | ) |
First, converts the normalized floating-point value v into 16-bit integer value.
Then, the results are packed into the returned 16-bit unsigned integer.
The conversion to fixed point is done as follows: packSnorm1x8: round(clamp(s, -1, +1) * 32767.0)
| GLM_FUNC_DECL uint8 glm::packSnorm1x8 | ( | float const & | s | ) |
First, converts the normalized floating-point value v into 8-bit integer value.
Then, the results are packed into the returned 8-bit unsigned integer.
The conversion to fixed point is done as follows: packSnorm1x8: round(clamp(s, -1, +1) * 127.0)
| GLM_FUNC_DECL uint16 glm::packSnorm2x8 | ( | vec2 const & | v | ) |
First, converts each component of the normalized floating-point value v into 8-bit integer values.
Then, the results are packed into the returned 16-bit unsigned integer.
The conversion for component c of v to fixed point is done as follows: packSnorm2x8: round(clamp(c, -1, +1) * 127.0)
The first component of the vector will be written to the least significant bits of the output; the last component will be written to the most significant bits.
| GLM_FUNC_DECL uint32 glm::packSnorm3x10_1x2 | ( | vec4 const & | v | ) |
First, converts the first three components of the normalized floating-point value v into 10-bit signed integer values.
Then, converts the forth component of the normalized floating-point value v into 2-bit signed integer values. Then, the results are packed into the returned 32-bit unsigned integer.
The conversion for component c of v to fixed point is done as follows: packSnorm3x10_1x2(xyz): round(clamp(c, -1, +1) * 511.0) packSnorm3x10_1x2(w): round(clamp(c, -1, +1) * 1.0)
The first vector component specifies the 10 least-significant bits of the result; the forth component specifies the 2 most-significant bits.
| GLM_FUNC_DECL uint64 glm::packSnorm4x16 | ( | vec4 const & | v | ) |
First, converts each component of the normalized floating-point value v into 16-bit integer values.
Then, the results are packed into the returned 64-bit unsigned integer.
The conversion for component c of v to fixed point is done as follows: packSnorm2x8: round(clamp(c, -1, +1) * 32767.0)
The first component of the vector will be written to the least significant bits of the output; the last component will be written to the most significant bits.
| GLM_FUNC_DECL uint32 glm::packU3x10_1x2 | ( | uvec4 const & | v | ) |
Returns an unsigned integer obtained by converting the components of a four-component unsigned integer vector to the 10-10-10-2-bit unsigned integer representation found in the OpenGL Specification, and then packing these four values into a 32-bit unsigned integer.
The first vector component specifies the 10 least-significant bits of the result; the forth component specifies the 2 most-significant bits.
| GLM_FUNC_DECL uint16 glm::packUnorm1x16 | ( | float | v | ) |
First, converts the normalized floating-point value v into a 16-bit integer value.
Then, the results are packed into the returned 16-bit unsigned integer.
The conversion for component c of v to fixed point is done as follows: packUnorm1x16: round(clamp(c, 0, +1) * 65535.0)
| GLM_FUNC_DECL uint8 glm::packUnorm1x8 | ( | float const & | v | ) |
First, converts the normalized floating-point value v into a 8-bit integer value.
Then, the results are packed into the returned 8-bit unsigned integer.
The conversion for component c of v to fixed point is done as follows: packUnorm1x8: round(clamp(c, 0, +1) * 255.0)
| GLM_FUNC_DECL uint16 glm::packUnorm2x8 | ( | vec2 const & | v | ) |
First, converts each component of the normalized floating-point value v into 8-bit integer values.
Then, the results are packed into the returned 16-bit unsigned integer.
The conversion for component c of v to fixed point is done as follows: packUnorm2x8: round(clamp(c, 0, +1) * 255.0)
The first component of the vector will be written to the least significant bits of the output; the last component will be written to the most significant bits.
| GLM_FUNC_DECL uint32 glm::packUnorm3x10_1x2 | ( | vec4 const & | v | ) |
First, converts the first three components of the normalized floating-point value v into 10-bit unsigned integer values.
Then, converts the forth component of the normalized floating-point value v into 2-bit signed uninteger values. Then, the results are packed into the returned 32-bit unsigned integer.
The conversion for component c of v to fixed point is done as follows: packUnorm3x10_1x2(xyz): round(clamp(c, 0, +1) * 1023.0) packUnorm3x10_1x2(w): round(clamp(c, 0, +1) * 3.0)
The first vector component specifies the 10 least-significant bits of the result; the forth component specifies the 2 most-significant bits.
| GLM_FUNC_DECL uint64 glm::packUnorm4x16 | ( | vec4 const & | v | ) |
First, converts each component of the normalized floating-point value v into 16-bit integer values.
Then, the results are packed into the returned 64-bit unsigned integer.
The conversion for component c of v to fixed point is done as follows: packUnorm4x16: round(clamp(c, 0, +1) * 65535.0)
The first component of the vector will be written to the least significant bits of the output; the last component will be written to the most significant bits.
| GLM_FUNC_DECL vec3 glm::unpackF2x11_1x10 | ( | uint32 const & | p | ) |
First, unpacks a single 32-bit unsigned integer p into two 11-bit signless floating-point values and one 10-bit signless floating-point value .
Then, each component is converted to a normalized floating-point value to generate the returned three-component vector.
The first component of the returned vector will be extracted from the least significant bits of the input; the last component will be extracted from the most significant bits.
| GLM_FUNC_DECL float glm::unpackHalf1x16 | ( | uint16 const & | v | ) |
Returns a floating-point scalar with components obtained by unpacking a 16-bit unsigned integer into a 16-bit value, interpreted as a 16-bit floating-point number according to the OpenGL Specification, and converting it to 32-bit floating-point values.
| GLM_FUNC_DECL vec4 glm::unpackHalf4x16 | ( | uint64 const & | p | ) |
Returns a four-component floating-point vector with components obtained by unpacking a 64-bit unsigned integer into four 16-bit values, interpreting those values as 16-bit floating-point numbers according to the OpenGL Specification, and converting them to 32-bit floating-point values.
The first component of the vector is obtained from the 16 least-significant bits of v; the forth component is obtained from the 16 most-significant bits of v.
| GLM_FUNC_DECL ivec4 glm::unpackI3x10_1x2 | ( | uint32 const & | p | ) |
Unpacks a single 32-bit unsigned integer p into three 10-bit and one 2-bit signed integers.
The first component of the returned vector will be extracted from the least significant bits of the input; the last component will be extracted from the most significant bits.
| GLM_FUNC_DECL float glm::unpackSnorm1x16 | ( | uint16 | p | ) |
First, unpacks a single 16-bit unsigned integer p into a single 16-bit signed integers.
Then, each component is converted to a normalized floating-point value to generate the returned scalar.
The conversion for unpacked fixed-point value f to floating point is done as follows: unpackSnorm1x16: clamp(f / 32767.0, -1, +1)
| GLM_FUNC_DECL float glm::unpackSnorm1x8 | ( | uint8 | p | ) |
First, unpacks a single 8-bit unsigned integer p into a single 8-bit signed integers.
Then, the value is converted to a normalized floating-point value to generate the returned scalar.
The conversion for unpacked fixed-point value f to floating point is done as follows: unpackSnorm1x8: clamp(f / 127.0, -1, +1)
| GLM_FUNC_DECL vec2 glm::unpackSnorm2x8 | ( | uint16 | p | ) |
First, unpacks a single 16-bit unsigned integer p into a pair of 8-bit signed integers.
Then, each component is converted to a normalized floating-point value to generate the returned two-component vector.
The conversion for unpacked fixed-point value f to floating point is done as follows: unpackSnorm2x8: clamp(f / 127.0, -1, +1)
The first component of the returned vector will be extracted from the least significant bits of the input; the last component will be extracted from the most significant bits.
| GLM_FUNC_DECL vec4 glm::unpackSnorm3x10_1x2 | ( | uint32 const & | p | ) |
First, unpacks a single 32-bit unsigned integer p into four 16-bit signed integers.
Then, each component is converted to a normalized floating-point value to generate the returned four-component vector.
The conversion for unpacked fixed-point value f to floating point is done as follows: unpackSnorm3x10_1x2(xyz): clamp(f / 511.0, -1, +1) unpackSnorm3x10_1x2(w): clamp(f / 511.0, -1, +1)
The first component of the returned vector will be extracted from the least significant bits of the input; the last component will be extracted from the most significant bits.
| GLM_FUNC_DECL vec4 glm::unpackSnorm4x16 | ( | uint64 const & | p | ) |
First, unpacks a single 64-bit unsigned integer p into four 16-bit signed integers.
Then, each component is converted to a normalized floating-point value to generate the returned four-component vector.
The conversion for unpacked fixed-point value f to floating point is done as follows: unpackSnorm4x16: clamp(f / 32767.0, -1, +1)
The first component of the returned vector will be extracted from the least significant bits of the input; the last component will be extracted from the most significant bits.
| GLM_FUNC_DECL uvec4 glm::unpackU3x10_1x2 | ( | uint32 const & | p | ) |
Unpacks a single 32-bit unsigned integer p into three 10-bit and one 2-bit unsigned integers.
The first component of the returned vector will be extracted from the least significant bits of the input; the last component will be extracted from the most significant bits.
| GLM_FUNC_DECL float glm::unpackUnorm1x16 | ( | uint16 | p | ) |
First, unpacks a single 16-bit unsigned integer p into a of 16-bit unsigned integers.
Then, the value is converted to a normalized floating-point value to generate the returned scalar.
The conversion for unpacked fixed-point value f to floating point is done as follows: unpackUnorm1x16: f / 65535.0
| GLM_FUNC_DECL float glm::unpackUnorm1x8 | ( | uint8 | ) |
Convert a single 8-bit integer to a normalized floating-point value.
The conversion for unpacked fixed-point value f to floating point is done as follows: unpackUnorm4x8: f / 255.0
| GLM_FUNC_DECL vec2 glm::unpackUnorm2x8 | ( | uint16 | p | ) |
First, unpacks a single 16-bit unsigned integer p into a pair of 8-bit unsigned integers.
Then, each component is converted to a normalized floating-point value to generate the returned two-component vector.
The conversion for unpacked fixed-point value f to floating point is done as follows: unpackUnorm4x8: f / 255.0
The first component of the returned vector will be extracted from the least significant bits of the input; the last component will be extracted from the most significant bits.
| GLM_FUNC_DECL vec4 glm::unpackUnorm3x10_1x2 | ( | uint32 const & | p | ) |
First, unpacks a single 32-bit unsigned integer p into four 16-bit signed integers.
Then, each component is converted to a normalized floating-point value to generate the returned four-component vector.
The conversion for unpacked fixed-point value f to floating point is done as follows: unpackSnorm3x10_1x2(xyz): clamp(f / 1023.0, 0, +1) unpackSnorm3x10_1x2(w): clamp(f / 3.0, 0, +1)
The first component of the returned vector will be extracted from the least significant bits of the input; the last component will be extracted from the most significant bits.
| GLM_FUNC_DECL vec4 glm::unpackUnorm4x16 | ( | uint64 const & | p | ) |
First, unpacks a single 64-bit unsigned integer p into four 16-bit unsigned integers.
Then, each component is converted to a normalized floating-point value to generate the returned four-component vector.
The conversion for unpacked fixed-point value f to floating point is done as follows: unpackUnormx4x16: f / 65535.0
The first component of the returned vector will be extracted from the least significant bits of the input; the last component will be extracted from the most significant bits.
1.8.5