The changes in 461f859a72 (llvm/llvm-project#65974) resulted in a change
in behavior not just for completion, but also for selection of inexect
commands.
Since many use `e` to mean `expression`, this change adds an alias for
`e`. Note that the referenced change similarly aliases `h` to `help`.
clang when given -g on Windows produces a PDB file. For whatever reason,
the test doesn't work with that.
-gdwarf produces DWARF regardless of platform.
Fixes 803f957e87e4083f6d61c8991171eeeaf0e6bd61.
I have to check for the sc list size being changed by the call-site
search, not just that it had more than one element.
Added a test for multiple CU's with the same name in a given module,
which would have caught this mistake.
We were also doing all the work to find call sites when the found decl
and specified decl's only difference was a column, but the incoming
specification hadn't specified a column (column number == 0).
When you set a "next branch breakpoint" and run to it while stepping,
you have to claim the stop at that breakpoint to be the top of the
inlined call stack, or you will seem to "step in" and then plans might
try to step back out again.
This records the PrefferedLineEntry for next branch breakpoints and adds
a test to make sure this works.
A Clang change introduced in this version breaks this test. Said
change was reverted in `52a9ba7ca4fb9427706c28bb3ca15f7a56eecf3f`
in newer versions of Clang.
The test is currently passing everywhere but this 32-bit arm ubuntu bot.
I don't have an easy way to debug this, so I'm skipping the test on that
platform till we get a chance to figure this out.
The computation of 'Thread::IsVirtualStep" was wrong - it called being
at the bottom of a virtual call stack a "virtual step" but that is
actually when you've gotten to concrete code and need to step for real.
I also added a test for this.
This fixes the two test suite failures that I missed in the PR:
https://github.com/llvm/llvm-project/pull/112939
One was a poorly written test case - it assumed that on connect to a
gdb-remote with a running process, lldb MUST have fetched all the frame
0 registers. In fact, there's no need for it to do so (as the CallSite
patch showed...) and if we don't need to we shouldn't. So I fixed the
test to only expect a `g` packet AFTER calling read_registers.
The other was a place where some code had used 0 when it meant
LLDB_INVALID_LINE_NUMBER, which I had fixed but missed one place where
it was still compared to 0.
…ne stepping (#112939)"
This was breaking some gdb-remote packet counting tests on the bots. I
can't see how this patch could cause that breakage, but I'm reverting to
figure that out.
This reverts commit f14743794587db102c6d1b20f9c87a1ac20decfd.
Previously lldb didn't support setting breakpoints on call site
locations. This patch adds that ability.
It would be very slow if we did this by searching all the debug
information for every inlined subroutine record looking for a call-site
match, so I added one restriction to the call-site support. This change
will find all call sites for functions that also supply at least one
line to the regular line table. That way we can use the fact that the
line table search will move the location to that subsequent line (but
only within the same function). When we find an actually moved source
line match, we can search in the function that contained that line table
entry for the call-site, and set the breakpoint location back to that.
When I started writing tests for this new ability, it quickly became
obvious that our support for virtual inline stepping was pretty buggy.
We didn't print the right file & line number for the breakpoint, and we
didn't set the position in the "virtual inlined stack" correctly when we
hit the breakpoint. We also didn't step through the inlined frames
correctly. There was code to try to detect the right inlined stack
position, but it had been refactored a while back with the comment that
it was super confusing and the refactor was supposed to make it clearer,
but the refactor didn't work either.
That code was made much clearer by abstracting the job of "handling the
stack readjustment" to the various StopInfo's. Previously, there was a
big (and buggy) switch over stop info's. Moving the responsibility to
the stop info made this code much easier to reason about.
We also had no tests for virtual inlined stepping (our inlined stepping
test was actually written specifically to avoid the formation of a
virtual inlined stack... So I also added tests for that along with the
tests for setting the call-site breakpoints.
Recently my coworker @jeffreytan81 pointed out that Minidumps don't show
breakpoints when collected. This was prior blocked because Minidumps
could only contain 1 exception, now that we support N signals/sections
we can save all the threads stopped on breakpoints.
Line ending policies were changed in the parent, dccebddb3b80. To make
it easier to resolve downstream merge conflicts after line-ending
policies are adjusted this is a separate whitespace-only commit. If you
have merge conflicts as a result, you can simply `git add --renormalize
-u && git merge --continue` or `git add --renormalize -u && git rebase
--continue` - depending on your workflow.
In recent PR https://github.com/llvm/llvm-project/pull/111531 for
Windows support, we enabled tests that require the `make` tool. On
Windows, default install directories likely contain spaces, in this case
e.g. `C:\Program Files (x86)\GnuWin32\bin\make.exe`. It's typically
handled well by CMake, so that today invocations from `dotest.py` don't
cause issues. However, we also have nested invocations from a number of
Makefiles themselves. These still failed if the path to the `make` tool
contains spaces.
This patch attempts to fix the functionalities/completion test by adding
quotes in the respective Makefile. If it keeps passing on the bots, we can
roll out the fix to all affected tests.
Reverting this again; I added a commit which added @skipIfDarwin
markers to the TestReverseContinueBreakpoints.py and
TestReverseContinueNotSupported.py API tests, which use lldb-server
in gdbserver mode which does not work on Darwin. But the aarch64 ubuntu
bot reported a failure on TestReverseContinueBreakpoints.py,
https://lab.llvm.org/buildbot/#/builders/59/builds/6397
File "/home/tcwg-buildbot/worker/lldb-aarch64-ubuntu/llvm-project/lldb/test/API/functionalities/reverse-execution/TestReverseContinueBreakpoints.py", line 63, in test_reverse_continue_skip_breakpoint
self.reverse_continue_skip_breakpoint_internal(async_mode=False)
File "/home/tcwg-buildbot/worker/lldb-aarch64-ubuntu/llvm-project/lldb/test/API/functionalities/reverse-execution/TestReverseContinueBreakpoints.py", line 81, in reverse_continue_skip_breakpoint_internal
self.expect(
File "/home/tcwg-buildbot/worker/lldb-aarch64-ubuntu/llvm-project/lldb/packages/Python/lldbsuite/test/lldbtest.py", line 2372, in expect
self.runCmd(
File "/home/tcwg-buildbot/worker/lldb-aarch64-ubuntu/llvm-project/lldb/packages/Python/lldbsuite/test/lldbtest.py", line 1002, in runCmd
self.assertTrue(self.res.Succeeded(), msg + output)
AssertionError: False is not true : Process should be stopped due to history boundary
Error output:
error: Process must be launched.
This reverts commit 4f297566b3150097de26c6a23a987d2bd5fc19c5.
This uses lldb-server in gdbserver mode, which requires a ProcessNative
plugin. Darwin does not have a ProcessNative plugin; it uses
debugserver instead of lldb-server. Skip these tests.
This commit only adds support for the
`SBProcess::ReverseContinue()` API. A user-accessible command for this
will follow in a later commit.
This feature depends on a gdbserver implementation (e.g. `rr`) providing
support for the `bc` and `bs` packets. `lldb-server` does not support
those packets, and there is no plan to change that. So, for testing
purposes, `lldbreverse.py` wraps `lldb-server` with a Python
implementation of *very limited* record-and-replay functionality for use
by *tests only*.
The majority of this PR is test infrastructure (about 700 of the 950
lines added).
This patch adds the support to `Process.cpp` to automatically save off
TLS sections, either via loading the memory region for the module, or
via reading `fs_base` via generic register. Then when Minidumps are
loaded, we now specify we want the dynamic loader to be the `POSIXDYLD`
so we can leverage the same TLS accessor code as `ProcessELFCore`. Being
able to access TLS Data is an important step for LLDB generated
minidumps to have feature parity with ELF Core dumps.
This commit only adds support for the
`SBProcess::ReverseContinue()` API. A user-accessible command for this
will follow in a later commit.
This feature depends on a gdbserver implementation (e.g. `rr`) providing
support for the `bc` and `bs` packets. `lldb-server` does not support
those packets, and there is no plan to change that. So, for testing
purposes, `lldbreverse.py` wraps `lldb-server` with a Python
implementation of *very limited* record-and-replay functionality for use
by *tests only*.
The majority of this PR is test infrastructure (about 700 of the 950
lines added).
Follow-up to the LLDB std::optional data-formatter test failure caused
by https://github.com/llvm/llvm-project/pull/110355.
Two formats are supported:
1. `__val_` has type `value_type`
2. `__val_`'s type is wrapped in `std::remove_cv_t`
Relands https://github.com/llvm/llvm-project/pull/108375 which had to be
reverted because it was failing on the Windows buildbot. Trying to
reland this with `msvc::no_unique_address` on Windows.
This reverts commit d5f6e886ff0df8265d44ab0646afcb4a06e6475a.
Caused failure on Windows CI. Following test failed:
```
Config=aarch64-C:\Users\tcwg\llvm-worker\lldb-aarch64-windows\build\bin\clang.exe
======================================================================
FAIL: test_r5_c2_ALTERNATE_LAYOUT (TestDataFormatterLibcxxStringSimulator.LibcxxStringDataFormatterSimulatorTestCase.test_r5_c2_ALTERNATE_LAYOUT)
partial(func, *args, **keywords) - new function with partial application
----------------------------------------------------------------------
Traceback (most recent call last):
File "C:\Users\tcwg\llvm-worker\lldb-aarch64-windows\llvm-project\lldb\test\API\functionalities\data-formatter\data-formatter-stl\libcxx-simulators\string\TestDataFormatterLibcxxStringSimulator.py", line 23, in _run_test
self.expect_var_path("longstring", summary='"I am a very long string"')
File "C:\Users\tcwg\llvm-worker\lldb-aarch64-windows\llvm-project\lldb\packages\Python\lldbsuite\test\lldbtest.py", line 2552, in expect_var_path
value_check.check_value(self, eval_result, str(eval_result))
File "C:\Users\tcwg\llvm-worker\lldb-aarch64-windows\llvm-project\lldb\packages\Python\lldbsuite\test\lldbtest.py", line 321, in check_value
test_base.assertEqual(
AssertionError: '"I am a very long string"' != '""'
- "I am a very long string"
+ ""
: (std::__lldb::string) longstring = ""
Checking SBValue: (std::__lldb::string) longstring = ""
```
We may need to use `msvc::no_unique_address` around the simulators.
In #102185, toolchain detection for API tests has been rewritten in
Python. Tools paths for tests there are determined from compiler path.
Here tools are taken from `--llvm-tools-dir` dotest.py argument, which
by default refers to the LLVM build directory, unless they are
explicitly redefined in environment variables. It helps to minimize
external dependencies and to maximize the reproducibility of the build.
And given that it is only for Linux - effectively skip it,
but in a way where we don't forget that it's Linux only.
See https://github.com/llvm/llvm-project/issues/85084.
This test times out on occasion on Arm, AArch64 and X86 Linux,
which I saw just today in a buildkite build. Causing a failure that
is 1. confusing because the PR wasn't for LLDB and 2. annoying
to find in the giant log file (which isn't the test's fault,
but it adds to the overhead).
It's probably important to have this test running somewhere but
right now it's causing too much noise to do so.
Fixes#107864
QEMU decided that when SVE is enabled it will only tell us about SVE
registers in the XML, and not include Neon registers. On the grounds
that the Neon V registers can be read from the bottom 128 bits of a SVE
Z register (SVE's vector length is always >= 128 bits).
To support this we create sub-registers just as we do for S and D
registers of the V registers. Except this time we use part of the Z
registers.
This change also updates our fallback for registers with unknown types
that are > 128 bit. This is detailed in
https://github.com/llvm/llvm-project/issues/87471, though that covers
more than this change fixes.
We'll now treat any register of unknown type that is >= 128 bit as a
vector of bytes. So that the user gets to see something
even if the order might be wrong.
And until lldb supports vector and union types for registers, this is
also the only way we can get a value to apply the sub-reg to, to make
the V registers.
(based on a conversation I had with @labath yesterday in
https://github.com/llvm/llvm-project/pull/106442)
Most APIs that currently vend a Status would be better served by
returning llvm::Expected<> instead. If possibles APIs should be
refactored to avoid Status. The only legitimate long-term uses of Status
are objects that need to store an error for a long time (which should be
questioned as a design decision, too).
This patch makes the transition to llvm::Error easier by making the
places that cannot switch to llvm::Error explicit: They are marked with
a call to Status::clone(). Every other API can and should be refactored
to use llvm::Expected. In the end Status should only be used in very few
places.
Whenever an unchecked Error is dropped by Status it logs this to the
verbose API channel.
Implementation notes:
This patch introduces two new kinds of error_category as well as new
llvm::Error types. Here is the mapping of lldb::ErrorType to
llvm::Errors:
```
(eErrorTypeInvalid)
eErrorTypeGeneric llvm::StringError
eErrorTypePOSIX llvm::ECError
eErrorTypeMachKernel MachKernelError
eErrorTypeExpression llvm::ErrorList<ExpressionError>
eErrorTypeWin32 Win32Error
```
Relanding with built-in cloning support for llvm::ECError, and support
for initializing a Windows error with a NO_ERROR error code, and
modifying TestGDBRemotePlatformFile.py to support different renderings
of ENOSYS.
...and "[lldb/Interpreter] Introduce `ScriptedStopHook{,Python}Interface` & make use of it (#105449)"
This reverts commit 76b827bb4d5b4cc4d3229c4c6de2529e8b156810, and commit 1e131ddfa8f1d7b18c85c6e4079458be8b419421
because the first commit caused the test command-stop-hook-output.test to fail.
This patch introduces new `ScriptedStopHook{,Python}Interface` classes
that make use of the Scripted Interface infrastructure and makes use of
it in `StopHookScripted`.
It also relax the requirement on the number of argument for initializing
scripting extension if the size of the interface parameter pack contains
1 less element than the extension maximum number of positional arguments
for this initializer.
This addresses the cases where the embedded interpreter session
dictionary is passed to the extension initializer which is not used most
of the time.
---------
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
This patch is in preparation for the `__compressed_pair` refactor in
https://github.com/llvm/llvm-project/pull/76756.
This is mostly reviewable now. With the new layout we no longer need to
unwrap the `__compressed_pair`. Instead, we just need to look for child
members. E.g., to get to the underlying pointer of `std::unique_ptr` we
no longer do,
```
GetFirstValueOfCXXCompressedPair(GetChildMemberWithName("__ptr_"))
```
but instead do
```
GetChildMemberWithName("__ptr_")
```
We need to be slightly careful because previously the
`__compressed_pair` had a member called `__value_`, whereas now
`__value_` might be a member of the class that used to hold the
`__compressed_pair`. So before unwrapping the pair, we added checks for
`isOldCompressedLayout` (not sure yet whether folding this check into
`GetFirstValueOfCXXCompressedPair` is better).
In #95312 Minidump file creation was moved from being created at the
end, to the file being emitted in chunks. This causes some undesirable
behavior where the file can still be present after an error has
occurred. To resolve this we will now delete the file upon an error.
