This avoids listing all soft waitcnt opcodes in two places
(getNonSoftWaitcntOpcode and isSoftWaitcnt) and avoids the need for
helpers isWaitcnt and isWaitcntVsCnt.
As not all fake instructions have their real counterparts implemented
yet, we specify no AssemblerPredicate for UseFakeTrue16Insts to allow
both fake and real True16 instructions in assembler and disassembler
tests in the -mattr=+real-true16 mode during the transition period.
Source DPP and desitnation VOPDstOperand_t16 operands are still not
supported and will be addressed separately.
This follows on from #76708, allowing
`cast<ConstantSDNode>(N)->getZExtValue()` to be replaced with just
`N->getAsZextVal();`
Introduced via `git grep -l "cast<ConstantSDNode>\(.*\).*getZExtValue" |
xargs sed -E -i
's/cast<ConstantSDNode>\((.*)\)->getZExtValue/\1->getAsZExtVal/'` and
then using `git clang-format` on the result.
Consistently treat packed 16-bit operands as 32-bit values, because
that's really what they are. The attempt to treat them differently was
ultimately incorrect and lead to miscompiles, e.g. when using non-splat
constants such as (1, 0) as operands.
Recognize 32-bit float constants for i/u16 instructions. This is a bit
odd conceptually, but it matches HW behavior and SP3.
Remove isFoldableLiteralV216; there was too much magic in the dependency
between it and its use in SIFoldOperands. Instead, we now simply rely on
checking whether a constant is an inline constant, and trying a bunch of
permutations of the low and high halves. This is more obviously correct
and leads to some new cases where inline constants are used as shown by
tests.
Move the logic for switching packed add vs. sub into SIFoldOperands.
This has two benefits: all logic that optimizes for inline constants in
packed math is now in one place; and it applies to both SelectionDAG and
GISel paths.
Disable the use of opsel with v_dot* instructions on gfx11. They are
documented to ignore opsel on src0 and src1. It may be interesting to
re-enable to use of opsel on src2 as a future optimization.
A similar "proper" fix of what inline constants mean could potentially
be applied to unpacked 16-bit ops. However, it's less clear what the
benefit would be, and there are surely places where we'd have to
carefully audit whether values are properly sign- or zero-extended. It
is best to keep such a change separate.
Fixes: Corruption in FSR 2.0 (latent bug exposed by an LLPC change)
This helper function shortens examples like
`cast<ConstantSDNode>(Node->getOperand(1))->getZExtValue();` to
`Node->getConstantOperandVal(1);`.
Implemented with:
`git grep -l
"cast<ConstantSDNode>\(.*->getOperand\(.*\)\)->getZExtValue\(\)" | xargs
sed -E -i
's/cast<ConstantSDNode>\((.*)->getOperand\((.*)\)\)->getZExtValue\(\)/\1->getConstantOperandVal(\2)/`
and `git grep -l
"cast<ConstantSDNode>\(.*\.getOperand\(.*\)\)->getZExtValue\(\)" | xargs
sed -E -i
's/cast<ConstantSDNode>\((.*)\.getOperand\((.*)\)\)->getZExtValue\(\)/\1.getConstantOperandVal(\2)/'`.
With a couple of simple manual fixes needed. Result then processed by
`git clang-format`.
It is currently disabled by default. It will need experiments on a real
HW to tune and decide on the profitability.
---------
Co-authored-by: Stanislav Mekhanoshin <Stanislav.Mekhanoshin@amd.com>
SIInstrInfo::areMemAccessesTriviallyDisjoint does a DS offset checks,
but does not account for LDS DMA instructions. Added these checks.
Without it code falls through and returns true which is wrong. As a
result mayAlias would always return false for LDS DMA and a regular LDS
instruction or 2 LDS DMA instructions.
At the moment this is NFCI because we do not use this AA in a context
which may touch LDS DMA instructions. This is also unreacheable now
because of the ordered memory ref checks just above in the function and
LDS DMA is marked as volatile. This volatile marking is removed in PR
#75247, therefore I'd submit this check before #75247.
These are picked up from getMemOperandsWithOffsetWidth but weren't then
being passed through to shouldClusterMemOps, which forces backends to
collect the information again if they want to use the kind of heuristics
typically used for the similar shouldScheduleLoadsNear function (e.g.
checking the offset is within 1 cache line).
This patch just adds the parameters, but doesn't attempt to use them.
There is potential to use them in the current PPC and AArch64
shouldClusterMemOps implementation, and I intend to use the offset in
the heuristic for RISC-V. I've left these for future patches in the
interest of being as incremental as possible.
As noted in the review and in an inline FIXME, an ElementCount-style abstraction may later be used to condense these two parameters to one argument. ElementCount isn't quite suitable as it doesn't support negative offsets.
We can use inline constants with packed 16-bit operands, but these
should use op_sel. Currently splat of inlinable constants is considered
legal, which is not really true if we fail to fold it with op_sel and
drop the high half. It may be legal as a literal but not as inline
constant, but then usual literal checks must be performed.
This patch makes these splat literals illegal but adds additional logic
to the operand folding to keep current folds. This logic is somewhat
heavy though.
This has fixed constant bus violation in the fdot2 test.
Allow foldImmediate to create instructions like:
v_fmaak_f32 v0, s0, v0, 0x42000000
This instruction has two "scalar values": s0 and 0x42000000. On GFX10+
this is allowed. This fold was originally implemented before the
compiler supported GFX10, when all ASICs were limited to one scalar
value.
As explained in the comment in SIInstrInfo::FoldImmediate, if we have a
choice between v_madak_f32 and v_madmk_f32 we should choose the former
so that the literal that is not folded into the instruction can be
materialized in an sgpr instead of a vgpr.
We adjust the insertion point at the BB top for spills/copies during RA
to ensure they are placed after the exec restore instructions required
for the divergent control flow execution. This is, however, required
only for the vector operations. The insertions for scalar registers can
still go to the BB top.
Allow foldImmediate to create instructions like:
v_fmamk_f32 v0, s0, 0x42000000, v0
This instruction has two "scalar values": s0 and 0x42000000. On GFX10+
this is allowed. This fold was originally implemented before the
compiler supported GFX10, when all ASICs were limited to one scalar
value.
SIInstrInfo::commuteInstructionImpl should accept indices to commute in
either order. This simplifies SIFoldOperands::tryAddToFoldList where
OtherIdx, CommuteIdx0 and CommuteIdx1 are no longer needed.
Track the live register state immediately before, instead of after,
MBBI. This makes it simple to track the state at the start or end of a
basic block without a separate (and poorly named) Tracking flag.
This changes the API of the backward(MachineBasicBlock::iterator I)
method, which now recedes to the state just before, instead of just
after, *I. Some clients are simplified by this change.
There is one small functional change shown in the lit tests where
multiple spilled registers all need to be reloaded before the same
instruction. The reloads will now be inserted in the opposite order.
This should not affect correctness.
moveToVALU previously only handled S_CSELECT_B64 in the trivial case
where it was semantically equivalent to a copy. Implement the general
case using V_CNDMASK_B64_PSEUDO and implement post-RA expansion of
V_CNDMASK_B64_PSEUDO with immediate as well as register operands.
When SI_PC_ADD_REL_OFFSET is expanded to S_GETPC/S_ADD/S_ADDC, the
GlobalAddress operands have to be adjusted by 4 or 12 bytes to account
for the offset from the end of the S_GETPC instruction to the literal
operands. Do this all in SIInstrInfo::expandPostRAPseudo instead of
duplicating the adjustment code in both AMDGPULegalizerInfo and
SITargetLowering. NFCI.
Add intrinsic for s_bitreplicate. Lower to S_BITREPLICATE_B64_B32
machine instruction in both GISel and Selection DAG.
Support VGPR arguments by inserting a `v_readfirstlane`.
We can use sign extended 64-bit literals, but only for signed operands.
At the moment we do not know if an operand is signed. Such operand will
be encoded as its low 32 bits and then either correctly sign extended or
incorrectly zero extended by HW.
The insertion point determined by RA while attempting spills and liverange
split at the beginning of a block goes wrong at times, and the newly
inserted vector instructions are placed before the exec-mask restore
instruction which is wrong. It occurs mainly due to the dependency on
isBasicBlockPrologue that doesn't account early inserted instructions
(spills and splits) during RA and causes the block prolog break.
A better approach for deciding the insertion point should be worked out.
For now, improving the helper function to consider all possible early
insertions. This patch includes the spill instructions. The copies
associated with liverange split should also be included in the block
prolog.
