Sometimes in unoptimized code, we have dangling unreachable basic blocks with no predecessors. Basic block sections should be emitted for those as well. Without this patch, the included test fails with a fatal error in `AsmPrinter::emitBasicBlockEnd`.
Reviewed By: tmsriram
Differential Revision: https://reviews.llvm.org/D89423
The support is disabled by default. So far there is instruction
selection, spilling, and frame elimination. It also changes SP
from unswizzled to swizzled as used by flat scratch instructions,
so it cannot be mixed with MUBUF stack access.
At the very least missing:
- GlobalISel;
- Some optimizations in frame elimination in between vector
and scalar ALU;
- It shall finally allow to always materialize frame index
as an SGPR, but that is not implemented and frame elimination
cannot handle it yet;
- Unaligned and/or multidword flat scratch shall work, but it
is legalized now for MUBUF;
- Operand folding cannot optimize FI like with MUBUF yet;
- It will need scaling the value of the SP/FP in the DWARF
expression to recover the unswizzled scratch address;
Differential Revision: https://reviews.llvm.org/D89170
The modified code in visitSTORE was missing a scalable vector check, and still
using the now deprecated implicit cast of TypeSize to uint64_t through the
overloaded operator. This patch fixes these issues.
This brings the logic in line with the comment on the context line immediately
above the added precondition.
Add a test in sve-redundant-store.ll that the warning is not triggered.
Differential Revision: https://reviews.llvm.org/D89701
This reverts commit 4604441386dc5fcd3165f4b39f5fa2e2c600f1bc.
Reverting because it was not the intended version of the patch, which
follows this patch.
The modified code in visitSTORE was missing a scalable vector check, and still
using the now deprecated implicit cast of TypeSize to uint64_t through the
overloaded operator. This patch fixes these issues.
This brings the logic in line with the comment on the context line immediately
above the added precondition.
Add a test in Redundantstores.ll that the warning is not triggered.
This allows using annotation in a much more contexts than it currently has.
especially when annotation with template or constexpr.
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D88645
This patch adds a remarks that provides counts for each opcode per basic block.
An snippet of the generated information can be seen below.
The current implementation uses the target specific opcode for the counts. For example, on AArch64 this means we currently get 2 entries for `add` instructions if the block contains 32 and 64 bit adds. Similarly, immediate version are treated differently.
Unfortunately there seems to be no convenient way to get only the mnemonic part of the instruction as a string AFAIK. This could be improved in the future.
```
--- !Analysis
Pass: asm-printer
Name: InstructionMix
DebugLoc: { File: arm64-instruction-mix-remarks.ll, Line: 30, Column: 30 }
Function: foo
Args:
- String: 'BasicBlock: '
- BasicBlock: else
- String: "\n"
- String: INST_MADDWrrr
- String: ': '
- INST_MADDWrrr: '2'
- String: "\n"
- String: INST_MOVZWi
- String: ': '
- INST_MOVZWi: '1'
```
Reviewed By: anemet, thegameg, paquette
Differential Revision: https://reviews.llvm.org/D89892
If no pal metadata is given, default to the msgpack format instead of
the legacy metadata. This makes tests better readable.
Differential Revision: https://reviews.llvm.org/D90035
Support atomic load instruction and add a regression test.
VE uses release consitency, so need to insert fence around
atomic instructions. This patch enable AtomicExpandPass
and use emitLeadingFence and emitTrailingFence mechanism
for such purpose.
Reviewed By: simoll
Differential Revision: https://reviews.llvm.org/D90135
Support atomic fence instruction and add a regression test.
Add MEMBARRIER pseudo insturction also to use it as a barrier
against to the compiler optimizations.
Reviewed By: simoll
Differential Revision: https://reviews.llvm.org/D90112
We use an absolute address for stack objects and
it would be necessary to have a constant 0 for soffset field.
Fixes: SWDEV-228562
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D89234
This value had the default value of 4 which caused branch relaxation to fail.
Review: Ulrich Weigand
Differential Revision: https://reviews.llvm.org/D90065
It's currently ambiguous in IR whether the source language explicitly
did not want a stack a stack protector (in C, via function attribute
no_stack_protector) or doesn't care for any given function.
It's common for code that manipulates the stack via inline assembly or
that has to set up its own stack canary (such as the Linux kernel) would
like to avoid stack protectors in certain functions. In this case, we've
been bitten by numerous bugs where a callee with a stack protector is
inlined into an __attribute__((__no_stack_protector__)) caller, which
generally breaks the caller's assumptions about not having a stack
protector. LTO exacerbates the issue.
While developers can avoid this by putting all no_stack_protector
functions in one translation unit together and compiling those with
-fno-stack-protector, it's generally not very ergonomic or as
ergonomic as a function attribute, and still doesn't work for LTO. See also:
https://lore.kernel.org/linux-pm/20200915172658.1432732-1-rkir@google.com/https://lore.kernel.org/lkml/20200918201436.2932360-30-samitolvanen@google.com/T/#u
Typically, when inlining a callee into a caller, the caller will be
upgraded in its level of stack protection (see adjustCallerSSPLevel()).
By adding an explicit attribute in the IR when the function attribute is
used in the source language, we can now identify such cases and prevent
inlining. Block inlining when the callee and caller differ in the case that one
contains `nossp` when the other has `ssp`, `sspstrong`, or `sspreq`.
Fixes pr/47479.
Reviewed By: void
Differential Revision: https://reviews.llvm.org/D87956
There are two optimizations here:
1. Consider the following code:
FCMPSrr %0, %1, implicit-def $nzcv
%sel1:gpr32 = CSELWr %_, %_, 12, implicit $nzcv
%sub:gpr32 = SUBSWrr %_, %_, implicit-def $nzcv
FCMPSrr %0, %1, implicit-def $nzcv
%sel2:gpr32 = CSELWr %_, %_, 12, implicit $nzcv
This kind of code where we have 2 FCMPs each feeding a CSEL can happen
when we have a single IR fcmp being used by two selects. During selection,
to ensure that there can be no clobbering of nzcv between the fcmp and the
csel, we have to generate an fcmp immediately before each csel is
selected.
However, often we can essentially CSE these together later in MachineCSE.
This doesn't work though if there are unrelated flag-setting instructions
in between the two FCMPs. In this case, the SUBS defines NZCV
but it doesn't have any users, being overwritten by the second FCMP.
Our solution here is to try to convert flag setting operations between
a interval of identical FCMPs, so that CSE will be able to eliminate one.
2. SelectionDAG imported patterns for arithmetic ops currently select the
flag-setting ops for CSE reasons, and add the implicit-def $nzcv operand
to those instructions. However if those impdef operands are not marked as
dead, the peephole optimizations are not able to optimize them into non-flag
setting variants. The optimization here is to find these dead imp-defs and
mark them as such.
This pass is only enabled when optimizations are enabled.
Differential Revision: https://reviews.llvm.org/D89415
Immediate must be in an integer range [0,255] for umin/umax instruction.
Extend pattern matching helper SelectSVEArithImm() to take in value type
bitwidth when checking immediate value is in range or not.
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D89831
In this patch, Predicates fix added for the following:
* disable prefix-instrs will disable pcrelative-memops
* set two predicates PairedVectorMemops and PrefixInstrs for PLXVP/PSTXVP definitions
Differential Revision: https://reviews.llvm.org/D89727
Reviewed by: amyk, steven.zhang
Downstream testing revealed some problems with this patch.
Reverting while investigating.
This reverts commit 2b96dcebfae65485859d956954f10f409abaae79.
Move the code which adjusts the immediate/predicate on a G_ICMP to
AArch64PostLegalizerLowering.
This
- Reduces the number of places we need to test for optimized compares in the
selector. We know that the compare should have been simplified by the time it
hits the selector, so we can avoid testing this in selects, brconds, etc.
- Allows us to potentially fold more compares (previously, this optimization
was only done after calling `tryFoldCompare`, this may allow us to hit some more
TST cases)
- Simplifies the selection code in `emitIntegerCompare` significantly; we can
just use an emitSUBS function.
- Allows us to avoid checking that the predicate has been updated after
`emitIntegerCompare`.
Also add a utility header file for things that may be useful in the selector
and various combiners. No need for an implementation file at this point, since
it's just one constexpr function for now. I've run into a couple cases where
having one of these would be handy, so might as well add it here. There are
a couple functions in the selector that can probably be factored out into
here.
Differential Revision: https://reviews.llvm.org/D89823
There are a lot of combines in AArch64PostLegalizerCombiner which exist to
facilitate instruction matching in the selector. (E.g. matching for G_ZIP and
other shuffle vector pseudos)
It still makes sense to select these instructions at -O0.
Matching earlier in a combiner can reduce complexity in the selector
significantly. For example, a good portion of our selection code for compares
would be a lot easier to represent in a combine.
This patch moves matching combines into a "AArch64PostLegalizerLowering"
combiner which runs at all optimization levels.
Also, while we're here, improve the documentation for the
AArch64PostLegalizerCombiner, and fix up the filepath in its file comment.
And also add a 'r' which somehow got dropped from a bunch of function names.
https://reviews.llvm.org/D89820
This commit marks i16 MULH as expand in AMDGPU backend,
which is necessary after the refactoring in D80485.
Differential Revision: https://reviews.llvm.org/D89965
If the end instruction of the scheduling region was a DBG_VALUE, the
uses of the debug instruction were tracked as if they were real
uses. This would then hit the deadDefHasNoUse assertion in
addVRegDefDeps if the only use was the debug instruction.
There are bunch of optimization opportunities right now in the vector
popcnt code gen when doing simple less-than/greater-than comparisons, so
let's examine them all to ensure that things don't regress as different
scenarios are fixed. We can always delete some later once some fixes are
made.
Please note: the new files were auto-generated. If people want, I can
commit the short C code that printed out the various combinations.
Some of our conversion algorithms produce -0.0 when converting unsigned i64 to double when the rounding mode is round toward negative. This switches them to other algorithms that don't have this problem. Since it is undefined behavior to change rounding mode with the non-strict nodes, this patch only changes the behavior for strict nodes.
There are still problems with unsigned i32 conversions too which I'll try to fix in another patch.
Fixes part of PR47393
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D87115
1. Fixed liveness issue with implicit kills.
2. Fixed potential problem with an indirect mov.
Fixes: SWDEV-256848
Differential Revision: https://reviews.llvm.org/D89599
Fixes being overly conservative with the register counts in called
functions. This should try to do a conservative range merge, but for
now just clone.
Also fix not being able to functionally run the pass standalone.
