lldb was originally designed to get the watchpoint exception behavior
from the gdb remote serial protocol stub -- exceptions are either
received before the instruction executes, or after the instruction
has executed. This behavior was reported via two lldb extensions
to gdb RSP, so generic remote stubs like gdbserver or a JTAG stub,
would not tell lldb which behavior was correct, and it would default
to "exceptions are received after the instruction has executed".
Two architectures hard coded their correct "exceptions before
instruction" behavior, to work around this issue.
Most architectures have a fixed behavior of watchpoint exceptions,
and we can center that information in lldb. We can allow a remote
stub to override the default behavior via our packet extensions
if it's needed on a specific target.
This patch also separates the fetching of the number of watchpoints
from whether exceptions are before/after the insn. Currently if
lldb couldn't fetch the number of watchpoints (not really needed), it
also wouldn't get when exceptions are received, and watchpoint
handling would fail. lldb doesn't actually use the number of
watchpoints for anything beyond printing it to the user.
Differential Revision: https://reviews.llvm.org/D143215
rdar://101426626
Summary: For functions that accept an rvalue reference type
parameter, use move to avoid copying the parameter.
These were found when implementing CppCoreGuideline F.18 in
clang-tidy.
Committed on behalf of ccotter (Chris Cotter)
Reviewers: Michael137
Differential Revision: https://reviews.llvm.org/D142824
The remote stub may give lldb hints about binaries to
be loaded, especially in a firmware type environment, and
relay those hints in the qProcessInfo response. The
binary loading was done very early in Process setup, before
we had any threads, and this made it complicated for people
to write dSYM python scripts which need access to a thread.
Delay the binary loading until a bit later in the Process
startup.
Differential Revision: https://reviews.llvm.org/D141972
rdar://104235301
This is a fairly large changeset, but it can be broken into a few
pieces:
- `llvm/Support/*TargetParser*` are all moved from the LLVM Support
component into a new LLVM Component called "TargetParser". This
potentially enables using tablegen to maintain this information, as
is shown in https://reviews.llvm.org/D137517. This cannot currently
be done, as llvm-tblgen relies on LLVM's Support component.
- This also moves two files from Support which use and depend on
information in the TargetParser:
- `llvm/Support/Host.{h,cpp}` which contains functions for inspecting
the current Host machine for info about it, primarily to support
getting the host triple, but also for `-mcpu=native` support in e.g.
Clang. This is fairly tightly intertwined with the information in
`X86TargetParser.h`, so keeping them in the same component makes
sense.
- `llvm/ADT/Triple.h` and `llvm/Support/Triple.cpp`, which contains
the target triple parser and representation. This is very intertwined
with the Arm target parser, because the arm architecture version
appears in canonical triples on arm platforms.
- I moved the relevant unittests to their own directory.
And so, we end up with a single component that has all the information
about the following, which to me seems like a unified component:
- Triples that LLVM Knows about
- Architecture names and CPUs that LLVM knows about
- CPU detection logic for LLVM
Given this, I have also moved `RISCVISAInfo.h` into this component, as
it seems to me to be part of that same set of functionality.
If you get link errors in your components after this patch, you likely
need to add TargetParser into LLVM_LINK_COMPONENTS in CMake.
Differential Revision: https://reviews.llvm.org/D137838
The dynamic linker on Darwin, dyld, can provide status of
the process state for a few significant points early on,
most importantly, when libSystem has been initialized and it
is safe to call functions behind the scenes. Pipe this
information up from debugserver to DynamicLoaderMacOS, for
the DynamicLoader::IsFullyInitialized() method, then have
Thread::SafeToCallFunctions use this information. Finally,
for the two utility functions in the AppleObjCRuntimeV2
LanguageRuntime plugin that I was fixing, call this method
before running our utility functions to collect the list of
objc classes registered in the runtime.
User expressions will still be allowed to run any time -
we assume the user knows what they are doing - but these
two additional utility functions that they are unaware of
will be limited by this state.
Differential Revision: https://reviews.llvm.org/D139054
rdar://102436092
can probably make function calls.
This patch mechanically replaces None with std::nullopt where the
compiler would warn if None were deprecated. The intent is to reduce
the amount of manual work required in migrating from Optional to
std::optional.
This is part of an effort to migrate from llvm::Optional to
std::optional:
https://discourse.llvm.org/t/deprecating-llvm-optional-x-hasvalue-getvalue-getvalueor/63716
A malformed qMemoryRegionInfo response can easily trigger an infinite
loop if regions end (base + size) wraps the address space. A
particularly interesting is the case where base+size=0, which a stub
could use to say that the rest of the memory space is unmapped, even
though lldb expects 0xff... in this case.
One could argue which behavior is more correct (technically, the
current behavior does not say anything about the last byte), but unless
we stop using 0xff... to mean "invalid address", that discussion is very
academic. This patch truncates address ranges which wraps the address
space, which handles the zero case as well as other kinds of malformed
packets.
It's fine right now, but will break as soon as someone else declares a
PluginProperties class in the same way.
Also tighten up the scope of the anonymous namespaces surrounding the
other PluginProperties classes.
Familiar story, callers are either checking upfront that the pointer
wasn't null or not checking at all. SetValueFromData itself didn't
check either.
So make the parameter a ref and fixup the few places where a nullptr
check seems needed.
Depends on D135668
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D135670
All callers were either assuming their pointer was not null before calling
this, or checking beforehand.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D135668
Use our "rich error" facility to propagate error reported by the stub to
the user. lldb-server reports rich launch errors as of D133352.
To make this easier to implement, and reduce code duplication, I have
moved the vRun/A/qLaunchSuccess handling into a single
GDBRemoteCommunicationClient function.
Differential Revision: https://reviews.llvm.org/D134754
Move ReadPacketWithOutputSupport() from GDBRemoteCommunication
to GDBRemoteClientBase. This function is client-specific and moving
it there simplifies followup patches that split communication into
separate thread.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.llvm.org/D135028
This happens if the type is described elsewhere in target xml as a
<flags> or <struct>.
Also hardcode the function names into the log messages because
if you use __FUNCTION__ in a lambda you just get "operator()".
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D134043
So that the XML isn't one giant line. Which wasn't
a problem for lldb but was for me trying to troubleshoot
it using the logs.
It now looks like:
```
<?xml version="1.0"?>
<target version="1.0">
<architecture>aarch64</architecture>
<feature>
<...>
<reg name="fpcr" .../>
</feature>
</target>
```
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D134035
A common debugging pattern is to set a breakpoint that only stops after
a number of hits is recorded. The current implementation never resets
the hit count of breakpoints; as such, if a user re-`run`s their
program, the debugger will never stop on such a breakpoint again.
This behavior is arguably undesirable, as it renders such breakpoints
ineffective on all but the first run. This commit changes the
implementation of the `Will{Launch, Attach}` methods so that they reset
the _target's_ breakpoint hitcounts.
Differential Revision: https://reviews.llvm.org/D133858
Add support for recognizing a platform binary in the ObjectFileMachO
method that parses the "load binary" LC_NOTEs in a corefile.
A bit of reorganization to ProcessMachCore::DoLoadCore to separate
all of the unrelated things being done in that method into their own
separate methods, as well as small fixes to improve the handling of
a corefile with multiple kernel images in the corefile.
Differential Revision: https://reviews.llvm.org/D133680
rdar://98754861
I went over the output of the following mess of a command:
(ulimit -m 2000000; ulimit -v 2000000; git ls-files -z | parallel
--xargs -0 cat | aspell list --mode=none --ignore-case | grep -E
'^[A-Za-z][a-z]*$' | sort | uniq -c | sort -n | grep -vE '.{25}' |
aspell pipe -W3 | grep : | cut -d' ' -f2 | less)
and proceeded to spend a few days looking at it to find probable typos
and fixed a few hundred of them in all of the llvm project (note, the
ones I found are not anywhere near all of them, but it seems like a
good start).
Differential revision: https://reviews.llvm.org/D131122
Complete support of the binary-addresses key in the qProcessInfo packet
in ProcessGDBRemote, for detecting if one of the binaries needs to be
handled by a Platform plugin, and can be used to set the Process'
DynamicLoader plugin and the Target's Platform plugin.
Implement this method in PlatformDarwinKernel to recognize a kernel
fileset at that address, find the actual kernel address in the
fileset, set DynamicLoaderDarwinKernel and PlatformDarwinKernel
in the Process/Target; register the kernel address with the dynamic
loader so it will be loaded later during attach.
This patch only addresses the live debug scenario with a gdb remote
serial protocol connection. I'll handle corefiles in a subsequent
patch that builds on this.
Differential Revision: https://reviews.llvm.org/D133534
rdar://98754861
Move the broadcasting support from GDBRemoteCommunication
to GDBRemoteClientBase since this is where it is actually used. Remove
GDBRemoteCommunication and subclass constructor arguments left over
after Communication cleanup.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.llvm.org/D133427
Uses our existing "error string" extension to provide a better
indication of why the launch failed (the client does not make use of the
error yet).
Also, fix the way we obtain the launch error message (make sure we read
the whole message, and skip trailing garbage), and reduce the size of
TestLldbGdbServer by splitting some tests into a separate file.
Differential Revision: https://reviews.llvm.org/D133352
Split the read thread support from Communication into a dedicated
ThreadedCommunication subclass. The read thread support is used only
by a subset of Communication consumers, and it adds a lot of complexity
to the base class. Furthermore, having a dedicated subclass makes it
clear whether a particular consumer needs to account for the possibility
of read thread being running or not.
The modules currently calling `StartReadThread()` are updated to use
`ThreadedCommunication`. The remaining modules use the simplified
`Communication` class.
`SBCommunication` is changed to use `ThreadedCommunication` in order
to avoid changing the public API.
`CommunicationKDP` is updated in order to (hopefully) compile with
the new code. However, I do not have a Darwin box to test it, so I've
limited the changes to the bare minimum.
`GDBRemoteCommunication` is updated to become a `Broadcaster` directly.
Since it does not inherit from `ThreadedCommunication`, its event
support no longer collides with the one used for read thread and can
be implemented cleanly. The support for
`eBroadcastBitReadThreadDidExit` is removed from the code -- since
the read thread was not used, this event was never reported.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.llvm.org/D133251
Replace the uses of Communication::Write() with WriteAll() to avoid
partial writes. None of the call sites actually accounted for that
possibility and even if it is unlikely to actually happen, there doesn't
seem to be any real harm from using WriteAll() instead.
Ideally, we'd remove Write() from the public API. However, that would
change the API of SBCommunication. The alternative would be to alias it
to WriteAll().
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.llvm.org/D132395
Try to always send vCont packets and include the PID in them if running
multiprocess. This is necessary to ensure that with the upcoming full
multiprocess support always resumes the correct process without having
to resort to the legacy Hc packets.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.llvm.org/D131758
Try to always send vCont packets and include the PID in them if running
multiprocess. This is necessary to ensure that with the upcoming full
multiprocess support always resumes the correct process without having
to resort to the legacy Hc packets.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.llvm.org/D131758
Suppress coverity false positives.
This diff contains comments only, including the hints for Coverity static code inspection
to suppress the warning originating at the next line after the comment.
Differential Revision: https://reviews.llvm.org/D131998
Make constructors of the Process and its subclasses class protected,
to prevent accidentally constructing Process on stack when it could be
afterwards accessed via a shared_ptr (since it uses
std::enable_shared_from_this<>).
The only place where a stack allocation was used were unittests,
and fixing them via declaring an explicit public constructor
in the respective mock classes is trivial.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.llvm.org/D131275
This commit combines the initial commit (7c240de609af), a fix for x86_64 Linux
(3a0581501e76) and a fix for thinko in a last minute rewrite that I really
should have run the testsuite on.
Also, make sure that all the "I need to step over watchpoint" plans execute
before we call a public stop. Otherwise, e.g. if you have N watchpoints and
a Signal, the signal stop info will get us to stop with the watchpoints in a
half-done state.
Differential Revision: https://reviews.llvm.org/D130674
Refactor the mechanism for sending interrupt packets to send them
from async thread (i.e. the same thread that sends the continue packet
preceding them and that waits for the response), rather than from
the thread requesting the interrupt. This is going to become especially
important when using the vCtrlC packet as part of the non-stop protocol,
as -- unlike the simple ^c sent in the all-stop mode -- this packet
involves an explicit reply.
Suggested by Pavel Labath in D126614.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.llvm.org/D131075
Add support to Mach-O corefiles and to live gdb remote serial protocol
connections for the corefile/remote stub to provide a list of load
addresses of binaries that should be found & loaded by lldb, and nothing
else. lldb will try to parse the binary out of memory, and if it can
find a UUID, try to find a binary & its debug information based on the
UUID, falling back to using the memory image if it must.
A bit of code unification from three parts of lldb that were loading
individual binaries already, so there is a shared method in
DynamicLoader to handle all of the variations they were doing.
Re-landing this with a uuid_is_null() implementation added to
Utility/UuidCompatibility.h for non-Darwin systems.
Differential Revision: https://reviews.llvm.org/D130813
rdar://94249937
rdar://94249384
This reverts commit d8879fba8825b9799166ba0ea552d4027bfb8ad1.
Debian bot failure; I included <uuid/uuid.h> to get uuid_is_null() but
don't get it there. Will memcmp or whatever & recommit.
Add support to Mach-O corefiles and to live gdb remote serial protocol
connections for the corefile/remote stub to provide a list of load
addresses of binaries that should be found & loaded by lldb, and nothing
else. lldb will try to parse the binary out of memory, and if it can
find a UUID, try to find a binary & its debug information based on the
UUID, falling back to using the memory image if it must.
A bit of code unification from three parts of lldb that were loading
individual binaries already, so there is a shared method in
DynamicLoader to handle all of the variations they were doing.
Differential Revision: https://reviews.llvm.org/D130813
rdar://94249937
rdar://94249384
Support using the vCont packet to resume multiple processes
simultaneously when in non-stop mode. The new logic now assumes that:
- actions without a thread-id or with process id of "p-1" apply to all
debugged processes
- actions with a thread-id without process id apply to the current
process (m_continue_process)
As with the other continue packets, it is only possible to resume
processes that are currently stopped (or stop these that are running).
It is unsupported to resume or stop individual threads of a running
process.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.llvm.org/D128989
Resubmission of https://reviews.llvm.org/D130309 with the 2 patches that fixed the linux buildbot, and new windows fixes.
The FileSpec APIs allow users to modify instance variables directly by getting a non const reference to the directory and filename instance variables. This makes it impossible to control all of the times the FileSpec object is modified so we can clear cached member variables like m_resolved and with an upcoming patch caching if the file is relative or absolute. This patch modifies the APIs of FileSpec so no one can modify the directory or filename instance variables directly by adding set accessors and by removing the get accessors that are non const.
Many clients were using FileSpec::GetCString(...) which returned a unique C string from a ConstString'ified version of the result of GetPath() which returned a std::string. This caused many locations to use this convenient function incorrectly and could cause many strings to be added to the constant string pool that didn't need to. Most clients were converted to using FileSpec::GetPath().c_str() when possible. Other clients were modified to use the newly renamed version of this function which returns an actualy ConstString:
ConstString FileSpec::GetPathAsConstString(bool denormalize = true) const;
This avoids the issue where people were getting an already uniqued "const char *" that came from a ConstString only to put the "const char *" back into a "ConstString" object. By returning the ConstString instead of a "const char *" clients can be more efficient with the result.
The patch:
- Removes the non const GetDirectory() and GetFilename() get accessors
- Adds set accessors to replace the above functions: SetDirectory() and SetFilename().
- Adds ClearDirectory() and ClearFilename() to replace usage of the FileSpec::GetDirectory().Clear()/FileSpec::GetFilename().Clear() call sites
- Fixed all incorrect usage of FileSpec::GetCString() to use FileSpec::GetPath().c_str() where appropriate, and updated other call sites that wanted a ConstString to use the newly returned ConstString appropriately and efficiently.
Differential Revision: https://reviews.llvm.org/D130549
