Non-entry functions have 32 caller saved VGPRs available. If we
promote alloca to consume more registers we will have to spill
CSRs. There is no reason to eliminate scratch access to get
another scratch access instead.
Differential Revision: https://reviews.llvm.org/D110372
Other <math>_finite calls are marked as unavailable except on GNU/Linux;
it looks like the sqrt set was just overlooked.
Differential Revision: https://reviews.llvm.org/D110418
This patch marks splat immediate instructions XXSPLTIW and XXSPLTIDP as
rematerializable to prevent MachineLICM from moving them out of loops.
Reviewed By: lei, amy
Differential revision: https://reviews.llvm.org/D108823
With architected flat scratch it becomes readonly. We must always
reserve SGPR pair for it even if we do not use scratch at all since
an attempt to write to SGPRs mapped to FLAT_SCRATCH results in
memory violation.
This is not needed since GFX10 with architected flat scratch though
since special SGPRs are not carving space from normal SGPRs.
Differential Revision: https://reviews.llvm.org/D110376
As suggested on D108522, if we're sign extending a v4i16 source before multiplying as a v4i32, then we can replace that with a zero extension and rely on the implicit sign-extension of PMADDWD.
This is motivated by the examples and discussion in:
https://llvm.org/PR51245
...and related bugs.
By using vector compares and vector logic, we can convert 2 'set'
instructions into 1 'movd' or 'movmsk' and generally improve
throughput/reduce instructions.
Unfortunately, we don't have a complete vector compare ISA before
AVX, so I left SSE-only out of this patch. Ie, we'd need extra logic
ops to simulate the missing predicates for SSE 'cmpp*', so it's not
as clearly a win.
Differential Revision: https://reviews.llvm.org/D110342
In repairIntervalsInRange, if the new instructions refer to subregs but
the old instructions did not, make sure any existing live interval for
the superreg is updated to have subranges. Also skip repairing any range
that we have recalculated from scratch, partly for efficiency but also
to avoids some cases that repairOldRegInRange can't handle.
The existing test/CodeGen/AMDGPU/twoaddr-regsequence.mir provides some
test coverage for this change: when TwoAddressInstructionPass converts
REG_SEQUENCE into subreg copies, the live intervals will now get
subranges and MachineVerifier will verify that the subranges are
correct. Unfortunately MachineVerifier does not complain if the
subranges are not present, so the test also passed before this patch.
This patch also fixes ~800 of the ~1500 failures in the whole CodeGen
lit test suite when -early-live-intervals is forced on.
Differential Revision: https://reviews.llvm.org/D110328
The fix applied in D23303 "LiveIntervalAnalysis: fix a crash in repairOldRegInRange"
was over-zealous. It would bail out when the end of the range to be
repaired was in the middle of the first segment of the live range of
Reg, which was always the case when the range contained a single def of
Reg.
This patch fixes it as suggested by Matthias Braun in post-commit review
on the original patch, and tests it by adding -early-live-intervals to
a selection of existing lit tests that now pass.
(Note that D23303 was originally applied to fix a crash in
SILoadStoreOptimizer, but that is now moot since D23814 updated
SILoadStoreOptimizer to run before scheduling so it no longer has to
update live intervals.)
Differential Revision: https://reviews.llvm.org/D110238
Unrevert with some changes to the tests:
- Add -verify-machineinstrs to check for remaining problems in live
interval support in TwoAddressInstructionPass.
- Drop test/CodeGen/AMDGPU/extract-load-i1.ll since it suffers from
some of those remaining problems.
Add the tail policy argument to LLVM IR intrinsics. There are two policies for tail elements. Tail agnostic means users do not care about the values in the tail elements and tail undisturbed means the values in the tail elements need to be kept after the operation. In order to let users control the tail policy, we add an additional argument at the end of the argument list.
For unmasked operations, we have no maskedoff and the tail policy is always tail agnostic. If users want to keep tail elements under unmasked operations, they could use all one mask in the masked operations to do it. So, we only add the additional argument for masked operations for most cases. There are exceptions listed below.
In this patch, we do not handle the following cases to reduce the complexity of the patch. There could be two separate patches for them.
* Use dest argument to control tail policy
vmerge.vvm/vmerge.vxm/vmerge.vim (add _t builtins with additional dest argument)
vfmerge.vfm (add _t builtins with additional dest argument)
vmv.v.v (add _t builtins with additional dest argument)
vmv.v.x (add _t builtins with additional dest argument)
vmv.v.i (add _t builtins with additional dest argument)
vfmv.v.f (add _t builtins with additional dest argument)
vadc.vvm/vadc.vxm/vadc.vim (add _t builtins with additional dest argument)
vsbc.vvm/vsbc.vxm (add _t builtins with additional dest argument)
* Always has tail argument for masked/unmasked intrinsics
Vector Single-Width Integer Multiply-Add Instructions (add _t and _mt builtins)
Vector Widening Integer Multiply-Add Instructions (add _t and _mt builtins)
Vector Single-Width Floating-Point Fused Multiply-Add Instructions (add _t and _mt builtins)
Vector Widening Floating-Point Fused Multiply-Add Instructions (add _t and _mt builtins)
Vector Reduction Operations (add _t and _mt builtins)
Vector Slideup Instructions (add _t and _mt builtins)
Vector Slidedown Instructions (add _t and _mt builtins)
Discussion: https://github.com/riscv/rvv-intrinsic-doc/pull/101
Differential Revision: https://reviews.llvm.org/D105092
The type legalizer has by default no method of doing this bitcast other than
storing and reloading the value from stack.
This patch implements a custom lowering of this operation using extractions
of subregs (z13 and earlier using FP128 register pairs), or of vector
elements (with 'vector enhancements 1' using VR128 FP registers).
Review: Ulrich Weigand
Differential Revision: https://reviews.llvm.org/D110346
It was assuming that GPR extends could only have destination sizes of 32 or 64
bits, but for AArch64 we allow < 32 bits even without matching size physregs.
We don't allow an initializer for LDS variables
and there is an early abort during instruction
selection. This patch legalizes them by ignoring
the init values. During assembly emission, proper
error reporting already exists for such instances.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D109901
On targets that do not support AGPR to AGPR copying directly, try to find the
defining accvgpr_write and propagate its source vgpr register to the copies
before register allocation so the source vgpr register does not get clobbered.
The postrapseudos pass also attempt to propagate the defining accvgpr_write but
if the register to propagate is clobbered, it will give up and create new
temporary vgpr registers instead.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D108830
Turn (and (shl x, c2), c1) -> (slli (srli x, c3-c2), c3) if c1 is a
shifted mask with no leading zeros and c3 trailing zeros where c3
is greater than c2.
These tests have C1 as a shifted mask having no leading zeros and
C3 trailing zeros. If C3 is more than C2, we can select this as
(slli (srli x, C3-C2), C3).
Some of these test show very poor code generation. Updating the tests
to make the tests more maintainable and prevent problems from being
hidden behind badly written test checks. Also in some of them the check
lines were using incorrect prefixes.
These are not-quite auto-generated. They are generated with the normal
update scripts and then uninteresting checks are removed, which at least
makes the test _more_ maintainable without materially changing what they
are testing.
I have otherwise attempted to not alter what is tested.
Turn (and (shr x, c2), c1) -> (slli (srli x, c2+c3), c3) if c1 is a
shifted mask with c2 leading zeros and c3 trailing zeros.
When the leading zeros is C2+32 we can use SRLIW in place of SRLI.
These tests have C1 as a shifted mask having C2 leading zeros and some
number of trailing zeros, C3. We can select this as
(slli (srli x, C2+C3), C3) or (slli (srliw x, C2+C3), C3).
The fix applied in D23303 "LiveIntervalAnalysis: fix a crash in repairOldRegInRange"
was over-zealous. It would bail out when the end of the range to be
repaired was in the middle of the first segment of the live range of
Reg, which was always the case when the range contained a single def of
Reg.
This patch fixes it as suggested by Matthias Braun in post-commit review
on the original patch, and tests it by adding -early-live-intervals to
a selection of existing lit tests that now pass.
(Note that D23303 was originally applied to fix a crash in
SILoadStoreOptimizer, but that is now moot since D23814 updated
SILoadStoreOptimizer to run before scheduling so it no longer has to
update live intervals.)
Differential Revision: https://reviews.llvm.org/D110238
This patch adds codegen support for lowering the vector-predicated
reduction intrinsics to RVV instructions. The process is similar to that
of the other reduction intrinsics, save for the fact that every VP
reduction has a start value. We reuse the existing custom "VL" nodes,
adding extra patterns where required to handle non-true masks.
To support these nodes, the `RISCVISD::VECREDUCE_*_VL` nodes have been
given an explicit "merge" operand. This is to faciliate the VP
reductions, where we must be careful to ensure that even if no operation
is performed (when VL=0) we still produce the start value. The RVV
reductions don't update the destination register under these conditions,
so we tie the splatted start value to the output register.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D107657
This patch is to support transform something like
_mm512_add_ph(acc, _mm512_fmadd_pch(a, b, _mm512_setzero_ph()))
to _mm512_fmadd_pch(a, b, acc).
Differential Revision: https://reviews.llvm.org/D109953
By not using ADDIW we can cause both an ADDIW and ADDI to be emitted
when the add has multiple users.
These instructions needed be added to the list of instructions that
only use the lower 32 bits of input.
I've also added tests for the wu versions, but I'm having trouble
showing bad codegen from it.
Neither of these passes modify the CFG, allowing us to preserve DomTree
and LoopInfo across them by using setPreservesCFG.
Differential Revision: https://reviews.llvm.org/D110161
When determining whether to fold branches to a common destination by
merging two blocks, SimplifyCFG will count the number of instructions to
be moved into the first basic block. However, there's no reason to count
free instructions like bitcasts and other similar instructions.
This resolves missed branch foldings with -fstrict-vtable-pointers in
llvm-test-suite's lambda benchmark.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D108837
We can use riscv_vse intrinsic instead of riscv_vse_mask. The code here
is based on similar code for handling masked.scatter and vp.scatter.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D110206
Currenlty PseudoProbeInserter is a pass conditioned on a target switch. It works well with a single clang invocation. It doesn't work so well when the backend is called separately (i.e, through the linker or llc), where user has always to pass -pseudo-probe-for-profiling explictly. I'm making the pass a default pass that requires no command line arg to trigger, but will be actually run depending on whether the CU comes with `llvm.pseudo_probe_desc` metadata.
Reviewed By: wenlei
Differential Revision: https://reviews.llvm.org/D110209
This patch splits up sve-extract-vector.ll into
* sve-extract-fixed-vector.ll
* sve-extract-scalable-vector.ll
For testing extracts of a fixed-width or scalable sub-vector from a
scalable source vector, respectively.
Like normal atomicrmw operations, at -O0 the simple register-allocator can
insert spills into the LL/SC loop if it's expanded and visible when regalloc
runs. This can cause the operation to never succeed by repeatedly clearing the
monitor. Instead expand to a cmpxchg, which has a pseudo-instruction for -O0.
This is required to codegen something like:
<vscale x 8 x i16> @llvm.experimental.vector.insert(<vscale x 8 x i16> %vec,
<vscale x 2 x i16> %subvec,
i64 %idx)
where the output vector is legal, but the input vector needs promoting.
It implements this by performing the whole operation on the promoted type,
and then truncating the result.
Reviewed By: david-arm, craig.topper
Differential Revision: https://reviews.llvm.org/D110059
This allows VMOVL in tail predicated loops so long as the the vector
size the VMOVL is extending into is less than or equal to the size of
the VCTP in the tail predicated loop. These cases represent a
sign-extend-inreg (or zero-extend-inreg), which needn't block tail
predication as in https://godbolt.org/z/hdTsEbx8Y.
For this a vecsize has been added to the TSFlag bits of MVE
instructions, which stores the size of the elements that the MVE
instruction operates on. In the case of multiple size (such as a
MVE_VMOVLs8bh that extends from i8 to i16, the largest size was be
chosen). The sizes are encoded as 00 = i8, 01 = i16, 10 = i32 and 11 =
i64, which often (but not always) comes from the instruction encoding
directly. A unit test was added, and although only a subset of the
vecsizes are currently used, the rest should be useful for other cases.
Differential Revision: https://reviews.llvm.org/D109706
Most of the code wasn't yet scalable safe, although most of the
code conceptually just works for scalable vectors. This change
makes the algorithm work on ElementCount, where appropriate,
and leaves the fixed-width only code to use `getFixedNumElements`.
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D110058
Use of output modifiers forces VOP3 encoding for a VOP2 mac/fmac
instruction, so we might as well convert it to the more flexible VOP3-
only mad/fma form.
With this change, the only way we should emit VOP3-encoded mac/fmac is
if regalloc chooses registers that require the VOP3 encoding, e.g. sgprs
for both src0 and src1. In all other cases the mac/fmac should either be
converted to mad/fma or shrunk to VOP2 encoding.
Differential Revision: https://reviews.llvm.org/D110156
