This fixes the two test suite failures that I missed in the PR:
https://github.com/llvm/llvm-project/pull/112939
One was a poorly written test case - it assumed that on connect to a
gdb-remote with a running process, lldb MUST have fetched all the frame
0 registers. In fact, there's no need for it to do so (as the CallSite
patch showed...) and if we don't need to we shouldn't. So I fixed the
test to only expect a `g` packet AFTER calling read_registers.
The other was a place where some code had used 0 when it meant
LLDB_INVALID_LINE_NUMBER, which I had fixed but missed one place where
it was still compared to 0.
…ne stepping (#112939)"
This was breaking some gdb-remote packet counting tests on the bots. I
can't see how this patch could cause that breakage, but I'm reverting to
figure that out.
This reverts commit f14743794587db102c6d1b20f9c87a1ac20decfd.
Previously lldb didn't support setting breakpoints on call site
locations. This patch adds that ability.
It would be very slow if we did this by searching all the debug
information for every inlined subroutine record looking for a call-site
match, so I added one restriction to the call-site support. This change
will find all call sites for functions that also supply at least one
line to the regular line table. That way we can use the fact that the
line table search will move the location to that subsequent line (but
only within the same function). When we find an actually moved source
line match, we can search in the function that contained that line table
entry for the call-site, and set the breakpoint location back to that.
When I started writing tests for this new ability, it quickly became
obvious that our support for virtual inline stepping was pretty buggy.
We didn't print the right file & line number for the breakpoint, and we
didn't set the position in the "virtual inlined stack" correctly when we
hit the breakpoint. We also didn't step through the inlined frames
correctly. There was code to try to detect the right inlined stack
position, but it had been refactored a while back with the comment that
it was super confusing and the refactor was supposed to make it clearer,
but the refactor didn't work either.
That code was made much clearer by abstracting the job of "handling the
stack readjustment" to the various StopInfo's. Previously, there was a
big (and buggy) switch over stop info's. Moving the responsibility to
the stop info made this code much easier to reason about.
We also had no tests for virtual inlined stepping (our inlined stepping
test was actually written specifically to avoid the formation of a
virtual inlined stack... So I also added tests for that along with the
tests for setting the call-site breakpoints.
This patch is rearranging code a bit to add WatchpointResources to
Process. A WatchpointResource is meant to represent a hardware
watchpoint register in the inferior process. It has an address, a size,
a type, and a list of Watchpoints that are using this
WatchpointResource.
This current patch doesn't add any of the features of
WatchpointResources that make them interesting -- a user asking to watch
a 24 byte object could watch this with three 8 byte WatchpointResources.
Or a Watchpoint on 1 byte at 0x1002 and a second watchpoint on 1 byte at
0x1003, these must both be served by a single WatchpointResource on that
doubleword at 0x1000 on a 64-bit target, if two hardware watchpoint
registers were used to track these separately, one of them may not be
hit. Or if you have one Watchpoint on a variable with a condition set,
and another Watchpoint on that same variable with a command defined or
different condition, or ignorecount, both of those Watchpoints need to
evaluate their criteria/commands when their WatchpointResource has been
hit.
There's a bit of code movement to rearrange things in the direction I'll
need for implementing this feature, so I want to start with reviewing &
landing this mostly NFC patch and we can focus on the algorithmic
choices about how WatchpointResources are shared and handled as they're
triggeed, separately.
This patch also stops printing "Watchpoint <n> hit: old value: <x>, new
vlaue: <y>" for Read watchpoints. I could make an argument for print
"Watchpoint <n> hit: current value <x>" but the current output doesn't
make any sense, and the user can print the value if they are
particularly interested. Read watchpoints are used primarily to
understand what code is reading a variable.
This patch adds more fallbacks for how to print the objects being
watched if we have types, instead of assuming they are all integral
values, so a struct will print its elements. As large watchpoints are
added, we'll be doing a lot more of those.
To track the WatchpointSP in the WatchpointResources, I changed the
internal API which took a WatchpointSP and devolved it to a Watchpoint*,
which meant touching several different Process files. I removed the
watchpoint code in ProcessKDP which only reported that watchpoints
aren't supported, the base class does that already.
I haven't yet changed how we receive a watchpoint to identify the
WatchpointResource responsible for the trigger, and identify all
Watchpoints that are using this Resource to evaluate their conditions
etc. This is the same work that a BreakpointSite needs to do when it has
been tiggered, where multiple Breakpoints may be at the same address.
There is not yet any printing of the Resources that a Watchpoint is
implemented in terms of ("watchpoint list", or
SBWatchpoint::GetDescription).
"watchpoint set var" and "watchpoint set expression" take a size
argument which was previously 1, 2, 4, or 8 (an enum). I've changed this
to an unsigned int. Most hardware implementations can only watch 1, 2,
4, 8 byte ranges, but with Resources we'll allow a user to ask for
different sized watchpoints and set them in hardware-expressble terms
soon.
I've annotated areas where I know there is work still needed with
LWP_TODO that I'll be working on once this is landed.
I've tested this on aarch64 macOS, aarch64 Linux, and Intel macOS.
https://discourse.llvm.org/t/rfc-large-watchpoint-support-in-lldb/72116
(cherry picked from commit fc6b72523f3d73b921690a713e97a433c96066c6)
...and follow ups.
As it has caused test failures on Linux Arm and AArch64:
https://lab.llvm.org/buildbot/#/builders/96/builds/49126https://lab.llvm.org/buildbot/#/builders/17/builds/45824
```
lldb-shell :: Subprocess/clone-follow-child-wp.test
lldb-shell :: Subprocess/fork-follow-child-wp.test
lldb-shell :: Subprocess/vfork-follow-child-wp.test
```
This reverts commit a6c62bf1a4717accc852463b664cd1012237d334,
commit a0a1ff3ab40e347589b4e27d8fd350c600526735 and commit
fc6b72523f3d73b921690a713e97a433c96066c6.
This patch is rearranging code a bit to add WatchpointResources to
Process. A WatchpointResource is meant to represent a hardware
watchpoint register in the inferior process. It has an address, a size,
a type, and a list of Watchpoints that are using this
WatchpointResource.
This current patch doesn't add any of the features of
WatchpointResources that make them interesting -- a user asking to watch
a 24 byte object could watch this with three 8 byte WatchpointResources.
Or a Watchpoint on 1 byte at 0x1002 and a second watchpoint on 1 byte at
0x1003, these must both be served by a single WatchpointResource on that
doubleword at 0x1000 on a 64-bit target, if two hardware watchpoint
registers were used to track these separately, one of them may not be
hit. Or if you have one Watchpoint on a variable with a condition set,
and another Watchpoint on that same variable with a command defined or
different condition, or ignorecount, both of those Watchpoints need to
evaluate their criteria/commands when their WatchpointResource has been
hit.
There's a bit of code movement to rearrange things in the direction I'll
need for implementing this feature, so I want to start with reviewing &
landing this mostly NFC patch and we can focus on the algorithmic
choices about how WatchpointResources are shared and handled as they're
triggeed, separately.
This patch also stops printing "Watchpoint <n> hit: old value: <x>, new
vlaue: <y>" for Read watchpoints. I could make an argument for print
"Watchpoint <n> hit: current value <x>" but the current output doesn't
make any sense, and the user can print the value if they are
particularly interested. Read watchpoints are used primarily to
understand what code is reading a variable.
This patch adds more fallbacks for how to print the objects being
watched if we have types, instead of assuming they are all integral
values, so a struct will print its elements. As large watchpoints are
added, we'll be doing a lot more of those.
To track the WatchpointSP in the WatchpointResources, I changed the
internal API which took a WatchpointSP and devolved it to a Watchpoint*,
which meant touching several different Process files. I removed the
watchpoint code in ProcessKDP which only reported that watchpoints
aren't supported, the base class does that already.
I haven't yet changed how we receive a watchpoint to identify the
WatchpointResource responsible for the trigger, and identify all
Watchpoints that are using this Resource to evaluate their conditions
etc. This is the same work that a BreakpointSite needs to do when it has
been tiggered, where multiple Breakpoints may be at the same address.
There is not yet any printing of the Resources that a Watchpoint is
implemented in terms of ("watchpoint list", or
SBWatchpoint::GetDescription).
"watchpoint set var" and "watchpoint set expression" take a size
argument which was previously 1, 2, 4, or 8 (an enum). I've changed this
to an unsigned int. Most hardware implementations can only watch 1, 2,
4, 8 byte ranges, but with Resources we'll allow a user to ask for
different sized watchpoints and set them in hardware-expressble terms
soon.
I've annotated areas where I know there is work still needed with
LWP_TODO that I'll be working on once this is landed.
I've tested this on aarch64 macOS, aarch64 Linux, and Intel macOS.
https://discourse.llvm.org/t/rfc-large-watchpoint-support-in-lldb/72116
The Watchpoint and Breakpoint objects try to track the hardware index
that was used for them, if they are hardware wp/bp's. The majority of
our debugging goes over the gdb remote serial protocol, and when we set
the watchpoint/breakpoint, there is no (standard) way for the remote
stub to communicate to lldb which hardware index was used. We have an
lldb-extension packet to query the total number of watchpoint registers.
When a watchpoint is hit, there is an lldb extension to the stop reply
packet (documented in lldb-gdb-remote.txt) to describe the watchpoint
including its actual hardware index,
<addr within wp range> <wp hw index> <actual accessed address>
(the third field is specifically needed for MIPS). At this point, if the
stub reported these three fields (the stub is only required to provide
the first), we can know the actual hardware index for this watchpoint.
Breakpoints are worse; there's never any way for us to be notified about
which hardware index was used. Breakpoints got this as a side effect of
inherting from StoppointSite with Watchpoints.
We expose the watchpoint hardware index through "watchpoint list -v" and
through SBWatchpoint::GetHardwareIndex.
With my large watchpoint support, there is no *single* hardware index
that may be used for a watchpoint, it may need multiple resources. Also
I don't see what a user is supposed to do with this information, or an
IDE. Knowing the total number of watchpoint registers on the target, and
knowing how many Watchpoint Resources are currently in use, is helpful.
Knowing how many Watchpoint Resources
a single user-specified watchpoint needed to be implemented is useful.
But knowing which registers were used is an implementation detail and
not available until we hit the watchpoint when using gdb remote serial
protocol.
So given all that, I'm removing watchpoint hardware index numbers. I'm
changing the SB API to always return -1.
This is an NFC cleanup.
Many of the API's that returned BreakpointOptions always returned valid ones.
Internally the BreakpointLocations usually have null BreakpointOptions, since they
use their owner's options until an option is set specifically on the location.
So the original code used pointers & unique_ptr everywhere for consistency.
But that made the code hard to reason about from the outside.
This patch changes the code so that everywhere an API is guaranteed to
return a non-null BreakpointOption, it returns it as a reference to make
that clear.
It also changes the Breakpoint to hold a BreakpointOption
member where it previously had a UP. Since we were always filling the UP
in the Breakpoint constructor, having the UP wasn't helping anything.
Differential Revision: https://reviews.llvm.org/D104162
The C headers are deprecated so as requested in D102845, this is replacing them
all with their (not deprecated) C++ equivalent.
Reviewed By: shafik
Differential Revision: https://reviews.llvm.org/D103084
Both of BreakpointLocation and BreakpointSite were inherited from StoppointLocation. However, the only thing
they shared was hit counting logic. The patch encapsulates those logic into StoppointHitCounter, renames
StoppointLocation to StoppointSite, and stops BreakpointLocation's inheriting from it.
Differential Revision: https://reviews.llvm.org/D84527
Recognize hardware breakpoints as breakpoints instead of just mach
exceptions. The mach exception is the same for watch and breakpoints, so
we have to try each to figure out which is which.
Differential revision: https://reviews.llvm.org/D73401
Summary:
A *.cpp file header in LLDB (and in LLDB) should like this:
```
//===-- TestUtilities.cpp -------------------------------------------------===//
```
However in LLDB most of our source files have arbitrary changes to this format and
these changes are spreading through LLDB as folks usually just use the existing
source files as templates for their new files (most notably the unnecessary
editor language indicator `-*- C++ -*-` is spreading and in every review
someone is pointing out that this is wrong, resulting in people pointing out that this
is done in the same way in other files).
This patch removes most of these inconsistencies including the editor language indicators,
all the different missing/additional '-' characters, files that center the file name, missing
trailing `===//` (mostly caused by clang-format breaking the line).
Reviewers: aprantl, espindola, jfb, shafik, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: dexonsmith, wuzish, emaste, sdardis, nemanjai, kbarton, MaskRay, atanasyan, arphaman, jfb, abidh, jsji, JDevlieghere, usaxena95, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D73258
the collection lock before we iterate over the owners calling ShouldStop.
BreakpointSite::ShouldStop can do a lot of work, and might by chance hit the same breakpoint
site again on another thread. So instead of holding the site's owners lock
while iterating over them calling ShouldStop, I make a local copy of the list, drop the lock
and then iterate over the copy calling BreakpointLocation::ShouldStop.
It's actually quite difficult to make this cause problems because usually all the
action happens on the private state thread, and the lock is recursive.
I have a report where some code hit the ASAN error breakpoint, went to
compile the ASAN error gathering expression, in the course of compiling
that we went to fetch the ObjC runtime data, but the state of the program
was such that the ObjC runtime grubbing function triggered an ASAN error and
we were executing that function on another thread.
I couldn't figure out a way to reproduce that situation in a test. But this is an
NFC change anyway, it just makes the locking strategy more narrowly focused.
<rdar://problem/49074093>
llvm-svn: 357141
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
This patch removes the comments grouping header includes. They were
added after running IWYU over the LLDB codebase. However they add little
value, are often outdates and burdensome to maintain.
llvm-svn: 346626
This moves the following classes from Core -> Utility.
ConstString
Error
RegularExpression
Stream
StreamString
The goal here is to get lldbUtility into a state where it has
no dependendencies except on itself and LLVM, so it can be the
starting point at which to start untangling LLDB's dependencies.
These are all low level and very widely used classes, and
previously lldbUtility had dependencies up to lldbCore in order
to use these classes. So moving then down to lldbUtility makes
sense from both the short term and long term perspective in
solving this problem.
Differential Revision: https://reviews.llvm.org/D29427
llvm-svn: 293941
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:
Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):
find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;
The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.
Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.
llvm-svn: 280751
This is a pretty straightforward first pass over removing a number of uses of
Mutex in favor of std::mutex or std::recursive_mutex. The problem is that there
are interfaces which take Mutex::Locker & to lock internal locks. This patch
cleans up most of the easy cases. The only non-trivial change is in
CommandObjectTarget.cpp where a Mutex::Locker was split into two.
llvm-svn: 269877
owners list, so the StopInfo machinery can get the list of owners without
some other thread being able to mess up the list by deleting/disabline one of its
locations in the process of doing so.
<rdar://problem/18685197>
llvm-svn: 243541
counts. If you delete a breakpoint belonging to a site just as you are
processing a hit on that site, you could cause the BreakpointSite loop to
access a now deleted location.
<rdar://problem/19310323>
llvm-svn: 243507
BreakpointLocation::ShouldStop. That worked but wasn't really right,
since there's nothing to guarantee that won't get called more than
once. So this change moves that responsibility to the StopInfoBreakpoint
directly, and then it uses the BreakpointSite to actually do the bumping.
Also fix a test case that was assuming if you had many threads running some
code with a breakpoint in it, the hit count when you stopped would always be
1. Many of the threads could have hit it at the same time...
<rdar://problem/18577603>
llvm-svn: 220358
Add the ability to give breakpoints a "kind" string, and have the StopInfoBreakpoint
print that in the brief description if set. Also print the kind - if set - in the breakpoint
listing.
Give kinds to a bunch of the internal breakpoints.
We were deleting the Mac OS X dynamic loader breakpoint as though the id we had stored away was
a breakpoint site ID, but in fact it was a breakpoint id, so we never actually deleted it. Fixed that.
llvm-svn: 173555
Major fixed to allow reading files that are over 4GB. The main problems were that the DataExtractor was using 32 bit offsets as a data cursor, and since we mmap all of our object files we could run into cases where if we had a very large core file that was over 4GB, we were running into the 4GB boundary.
So I defined a new "lldb::offset_t" which should be used for all file offsets.
After making this change, I enabled warnings for data loss and for enexpected implicit conversions temporarily and found a ton of things that I fixed.
Any functions that take an index internally, should use "size_t" for any indexes and also should return "size_t" for any sizes of collections.
llvm-svn: 173463
due to RTTI worries since llvm and clang don't use RTTI, but I was able to
switch back with no issues as far as I can tell. Once the RTTI issue wasn't
an issue, we were looking for a way to properly track weak pointers to objects
to solve some of the threading issues we have been running into which naturally
led us back to std::tr1::weak_ptr. We also wanted the ability to make a shared
pointer from just a pointer, which is also easily solved using the
std::tr1::enable_shared_from_this class.
The main reason for this move back is so we can start properly having weak
references to objects. Currently a lldb_private::Thread class has a refrence
to its parent lldb_private::Process. This doesn't work well when we now hand
out a SBThread object that contains a shared pointer to a lldb_private::Thread
as this SBThread can be held onto by external clients and if they end up
using one of these objects we can easily crash.
So the next task is to start adopting std::tr1::weak_ptr where ever it makes
sense which we can do with lldb_private::Debugger, lldb_private::Target,
lldb_private::Process, lldb_private::Thread, lldb_private::StackFrame, and
many more objects now that they are no longer using intrusive ref counted
pointer objects (you can't do std::tr1::weak_ptr functionality with intrusive
pointers).
llvm-svn: 149207
Also change the SourceInitFile to look for .lldb-<APPNAME> and source that
preferentially if it exists.
Also made the breakpoint site report its address as well as its breakpoint number
when it gets hit and can't find any the associated locations (usually because the
breakpoint got disabled or deleted programmatically between the time it was hit
and reported.)
Changed ThreadPlanCallFunction to initialize the ivar m_func in the initializers of the
constructor, rather than waiting to initialize till later on in the function.
Fixed a bug where if you make an SBError and the ask it Success, it returns false.
Fixed ValueObject::ResolveValue so that it resolves a temporary value, rather than
overwriting the one in the value object.
llvm-svn: 137536
by being able to get the data count and data. Each thread stop reason
has one or more data words that can help describe the stop. To do this
I added:
size_t
SBThread::GetStopReasonDataCount();
uint64_t
SBThread::GetStopReasonDataAtIndex(uint32_t idx);
llvm-svn: 119720
enabled LLVM make style building and made this compile LLDB on Mac OS X. We
can now iterate on this to make the build work on both linux and macosx.
llvm-svn: 108009
Push this through all the breakpoint management code. Allow this to be set when the breakpoint is created.
Fix the Process classes so that a breakpoint hit that is not for a particular thread is not reported as a
breakpoint hit event for that thread.
Added a "breakpoint configure" command to allow you to reset any of the thread
specific options (or the ignore count.)
llvm-svn: 106078
