This PR adds a number of thus-far missing extended mnemonics to the
assembler and disassembler for SystemZ.
The following mnemonics have been added and are supported for the
assembler and disassembler:
- `NOP(R)?`
- `LFI`
- `RISBG(N)?Z`
The following mnemonics have been added and are supported for the
assembler only:
- `JC(TH)?`
- `LLG(F|H)I`
- `NOT(G)?R`
The usage of FP Load and Test instructions as a comparison against zero
with the assumption that the dest reg will always reflect the source reg is
actually incorrect: Unfortunately, a SNaN will be converted to a QNaN, so the
instruction may actually change the value as opposed to being a pure register
move with a test.
This patch
- changes instruction selection to always emit FP LT with a scratch def
reg, which will typically be allocated to the same reg if dead.
- Removes the conversions into FP LT in SystemZElimcompare.
D150312 added a TODO:
TODO: consider renaming the field `StartAtCycle` and `Cycles` to
`AcquireAtCycle` and `ReleaseAtCycle` respectively, to stress the
fact that resource allocation is now represented as an interval,
relatively to the issue cycle of the instruction.
This patch implements that TODO. This naming clarifies how to use these
fields in the scheduler. In addition it was confusing that `StartAtCycle` was
singular but `Cycles` was plural. This renaming fixes this inconsistency.
This commit as previously reverted since it missed renaming that came
down after rebasing. This version of the commit fixes those problems.
Differential Revision: https://reviews.llvm.org/D158568
D150312 added a TODO:
TODO: consider renaming the field `StartAtCycle` and `Cycles` to
`AcquireAtCycle` and `ReleaseAtCycle` respectively, to stress the
fact that resource allocation is now represented as an interval,
relatively to the issue cycle of the instruction.
This patch implements that TODO. This naming clarifies how to use these
fields in the scheduler. In addition it was confusing that `StartAtCycle` was
singular but `Cycles` was plural. This renaming fixes this inconsistency.
This commit as previously reverted since it missed renaming that came
down after rebasing. This version of the commit fixes those problems.
Differential Revision: https://reviews.llvm.org/D158568
D150312 added a TODO:
TODO: consider renaming the field `StartAtCycle` and `Cycles` to
`AcquireAtCycle` and `ReleaseAtCycle` respectively, to stress the
fact that resource allocation is now represented as an interval,
relatively to the issue cycle of the instruction.
This patch implements that TODO. This naming clarifies how to use these
fields in the scheduler. In addition it was confusing that `StartAtCycle` was
singular but `Cycles` was plural. This renaming fixes this inconsistency.
Differential Revision: https://reviews.llvm.org/D158568
This patch extends support for generating huge stack frames on 64-bit XPLINK by implementing the ABI-mandated call to the stack extension routine.
Reviewed By: uweigand
Differential Revision: https://reviews.llvm.org/D120450
The XPLINK return `b 2(7)` has size 4 bytes, while the Linux return
`br 7` only has size 2 bytes. Thus a new alias is required to have correct
instruction byte count. It also fixes the conditional return code.
Reviewed By: uweigand
Differential Revision: https://reviews.llvm.org/D119437
This commit adds the initial changes to the SystemZ target
description for the XPLINK 64-bit calling convention on z/OS.
Additions include:
- a new predicate IsTargetXPLINK64
- different register allocation order
- generaton of nopr after a call
Reviewed-by: uweigand
Differential Revision: https://reviews.llvm.org/D96887
Vector load/store instructions support an optional alignment field
that the compiler can use to provide known alignment info to the
hardware. If the field is used (and the information is correct),
the hardware may be able (on some models) to perform faster memory
accesses than otherwise.
This patch adds support for alignment hints in the assembler and
disassembler, and fills in known alignment during codegen.
llvm-svn: 363806
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Some instructions expand to more than one decoder group.
This has been hitherto ignored, but is handled with this patch.
Review: Ulrich Weigand
https://reviews.llvm.org/D50187
llvm-svn: 338849
NFC changes to make scheduler TableGen files more readable, by using loops
instead of a lot of similar defs with just e.g. a latency value that changes.
https://reviews.llvm.org/D49598
Review: Ulrich Weigand, Javed Abshar
llvm-svn: 337909
As a consequence of recent discussions
(http://lists.llvm.org/pipermail/llvm-dev/2018-May/123164.html), this patch
changes the SystemZ SchedModels so that the IssueWidth is 6, which is the
decoder capacity, and NumMicroOps become the number of decoder slots needed
per instruction.
In addition, the SchedWrite latencies now match the MachineInstructions
def-operand indexes, and ReadAdvances have been added on instructions with
one register operand and one memory operand.
Review: Ulrich Weigand
https://reviews.llvm.org/D47008
llvm-svn: 337538
If the MachineInstr uses a custom inserter and is then erased after
instruction selection, there is no use for mapping it to a sched class.
Review: Ulrich Weigand
llvm-svn: 331040
This is similar to the check later when we remap some of the instructions from one class to a new one. But if we reuse the class we don't get to do that check.
So many CPUs have violations of this check that I had to add a flag to the SchedMachineModel to allow it to be disabled. Hopefully we can get those cleaned up quickly and remove this flag.
A lot of the violations are due to overlapping regular expressions, but that's not the only kind of issue it found.
llvm-svn: 327808
Several integer multiply/divide instructions require use of a
register pair as input and output. This patch moves setting
up the input register pair from C++ code to TableGen, simplifying
the whole process and making it more easily extensible.
No functional change.
llvm-svn: 307155
Fixes a couple of whitespace errors, re-sorts the vector floating-point
instructions to make them more easily extensible, and adds a missing
pseudo instruction.
No functional change.
llvm-svn: 307154
This adds all remaining instructions that were still missing, mostly
privileged and semi-privileged system-level instructions. These are
provided for use with the assembler and disassembler only.
This brings the LLVM assembler / disassembler to parity with the
GNU binutils tools.
llvm-svn: 306876
There are a few instructions provided by the high-word facility (z196)
that we cannot easily exploit for code generation. This patch at least
adds those missing instructions for the assembler and disassembler.
This means that now all nonprivileged instructions up to z13 are
supported by the LLVM assembler / disassembler.
llvm-svn: 306821
This adds assembler / disassembler support for the decimal
floating-point instructions. Since LLVM does not yet have
support for decimal float types, these cannot be used for
codegen at this point.
llvm-svn: 304203
This adds assembler / disassembler support for the hexadecimal
floating-point instructions. Since the Linux ABI does not use
any hex float data types, these are not useful for codegen.
llvm-svn: 304202
This adds a few missing instructions for the assembler and
disassembler. Those should be the last missing general-
purpose (Chapter 7) instructions for the z10 ISA.
llvm-svn: 302667
This adds the remaining general arithmetic instructions
for assembler / disassembler use. Most of these are not
useful for codegen; a few might be, and those are listed
in the README.txt for future improvements.
llvm-svn: 302665
Vector immediate load instructions should have the isAsCheapAsAMove, isMoveImm
and isReMaterializable flags set. With them, these instruction will get
hoisted out of loops.
Review: Ulrich Weigand
llvm-svn: 292790
Add assembler support for all atomic instructions that weren't already
supported. Some of those could be used to implement codegen for 128-bit
atomic operations, but this isn't done here yet.
llvm-svn: 288526
Add assembler support for instructions manipulating the FPC.
Also add codegen support via the GCC compatibility builtins:
__builtin_s390_sfpc
__builtin_s390_efpc
llvm-svn: 288525
This adds assembler support for the instructions provided by the
execution-hint facility (NIAI and BP(R)P). This required adding
support for the new relocation types for 12-bit and 24-bit PC-
relative offsets used by the BP(R)P instructions.
llvm-svn: 288031
This patch adds assembler support for the remaining branch instructions:
the non-relative branch on count variants, and all variants of branch
on index.
The only one of those that can be readily exploited for code generation
is BRCTH (branch on count using a high 32-bit register as count). Do
use it, however, it is necessary to also introduce a hew CHIMux pseudo
to allow comparisons of a 32-bit value agains a short immediate to go
into a high register as well (implemented via CHI/CIH).
This causes a bit of codegen changes overall, but those have proven to
be neutral (or even beneficial) in performance measurements.
llvm-svn: 288029
This patch moves formation of LOC-type instructions from (late)
IfConversion to the early if-conversion pass, and in some cases
additionally creates them directly from select instructions
during DAG instruction selection.
To make early if-conversion work, the patch implements the
canInsertSelect / insertSelect callbacks. It also implements
the commuteInstructionImpl and FoldImmediate callbacks to
enable generation of the full range of LOC instructions.
Finally, the patch adds support for all instructions of the
load-store-on-condition-2 facility, which allows using LOC
instructions also for high registers.
Due to the use of the GRX32 register class to enable high registers,
we now also have to handle the cases where there are still no single
hardware instructions (conditional move from a low register to a high
register or vice versa). These are converted back to a branch sequence
after register allocation. Since the expandRAPseudos callback is not
allowed to create new basic blocks, this requires a simple new pass,
modelled after the ARM/AArch64 ExpandPseudos pass.
Overall, this patch causes significantly more LOC-type instructions
to be used, and results in a measurable performance improvement.
llvm-svn: 288028
This adds support for the compare logical and trap (memory)
instructions that were added as part of the miscellaneous
instruction extensions feature with zEC12.
llvm-svn: 286587
This adds support for the LZRF/LZRG/LLZRGF instructions that were
added on z13, and uses them for code generation were appropriate.
SystemZDAGToDAGISel::tryRISBGZero is updated again to prefer LLZRGF
over RISBG where both would be possible.
llvm-svn: 286586
This adds support for the 31-to-64-bit zero extension instructions
LLGT and LLGTR and uses them for code generation where appropriate.
Since this operation can also be performed via RISBG, we have to
update SystemZDAGToDAGISel::tryRISBGZero so that we prefer LLGT
over RISBG in case both are possible. The patch includes some
simplification to the tryRISBGZero code; this is not intended
to cause any (further) functional change in codegen.
llvm-svn: 286585
This completes assembler / disassembler support for all BFP
instructions provided by the floating-point extensions facility.
The instructions added here are not currently used for codegen.
llvm-svn: 286285
Add several instructions that operate on the program mask
or the addressing mode. These are not really needed for
code generation under Linux, but are provided for completeness
for the assembler/disassembler.
llvm-svn: 286284
Add the 16 access registers as LLVM registers. This allows removing
a lot of special cases in the assembler and disassembler where we
were handling access registers; this can all just use the generic
register code now.
Also add a bunch of instructions to operate on access registers,
for assembler/disassembler use only. No change in code generation
intended.
llvm-svn: 286283
