Implements std::from_chars for float and double.
The implementation uses LLVM-libc to do the real parsing. Since this is
the first time libc++
uses LLVM-libc there is a bit of additional infrastructure code. The
patch is based on the
[RFC] Project Hand In Hand (LLVM-libc/libc++ code sharing)
https://discourse.llvm.org/t/rfc-project-hand-in-hand-llvm-libc-libc-code-sharing/77701
Apparently, there are two almost identical implementations: one for
MachO and another one for ELF. The ELF bits somehow slipped while
https://github.com/llvm/llvm-project/pull/84573 was reviewed.
The particular implementation is identical to MachO case.
This re-formats a few headers that had become out-of-sync with respect
to formatting since we ran clang-format on the whole codebase. There's
surprisingly few instances of it.
Summary:
The logic for this `__is_function_overridden` check requires accessing a
runtime array normally created by the linker. The NVPTX target is an
`__ELF__` target, however it does not support emitting the
`__start/__stop` symbols for C-identifier named sections. This needs to
be disabled explicitly so that the user can compile this with anything.
This patch applies the comments provided on #84573. This is done as a
separate PR to avoid merge conflicts with downstreams that already had
ptrauth support.
The overhead of taking a std::mutex is much lower than taking a reader
lock on a shared mutex, even under heavy contention.
The benefit of shared_mutex only occurs as the amount of
time spent in the critical sections grows large enough.
In our case all we do is read a pointer and return the lock.
As a result, using a shared lock can be ~50%-100% slower
Here are the results for the provided benchmark on my machine:
```
2024-04-07T12:48:51-04:00
Running ./libcxx/benchmarks/shared_mutex_vs_mutex.libcxx.out
Run on (12 X 400 MHz CPU s)
CPU Caches:
L1 Data 32 KiB (x6)
L1 Instruction 32 KiB (x6)
L2 Unified 1024 KiB (x6)
L3 Unified 32768 KiB (x1)
Load Average: 2.70, 2.70, 1.63
---------------------------------------------------------------------
Benchmark Time CPU Iterations
---------------------------------------------------------------------
BM_shared_mutex/threads:1 13.9 ns 13.9 ns 50533700
BM_shared_mutex/threads:2 34.5 ns 68.9 ns 9957784
BM_shared_mutex/threads:4 38.4 ns 137 ns 4987772
BM_shared_mutex/threads:8 51.1 ns 358 ns 1974160
BM_shared_mutex/threads:32 57.1 ns 682 ns 1043648
BM_mutex/threads:1 5.54 ns 5.53 ns 125867422
BM_mutex/threads:2 15.5 ns 30.9 ns 21830116
BM_mutex/threads:4 15.4 ns 57.2 ns 12136920
BM_mutex/threads:8 19.3 ns 140 ns 4997080
BM_mutex/threads:32 20.8 ns 252 ns 2859808
```
Adds the sys_info class and time_zone::get_info(). The code still has a
few quirks and has not been optimized for performance yet.
The returned sys_info is compared against the output of the zdump tool
in the test giving confidence the implementation is correct.
Implements parts of:
- P0355 Extending <chrono> to Calendars and Time Zones
Implements:
- LWGXXXX The sys_info range should be affected by save
This implements the loading of the leap-seconds.list file and store its
contents in the tzdb struct.
This adds the required `leap_seconds` member.
The class leap_seconds is fully implemented including its non-member
functions.
Implements parts of:
- P0355 Extending <chrono> to Calendars and Time Zones
- P1614 The Mothership has Landed
Implements:
- P1981 Rename leap to leap_second
- LWG3359 <chrono> leap second support should allow for negative leap
seconds
- LWG3383 §[time.zone.leap.nonmembers] sys_seconds should be replaced
with seconds
This is an exact upstreaming of the downstream diff. Minor
simplifications can be made in the future but upstreaming as-is will
make it easier for us to deal with downstream merge conflicts.
Partially fixes#83805
This implements the loading of the tzdata.zi file and store its contents
in the tzdb struct.
This adds all required members except:
- the leap seconds,
- the locate_zone, and
- current_zone.
The class time_zone is incomplete and only contains the parts needed for
storing the parsed data.
The class time_zone_link is fully implemented including its non-member
functions.
Implements parts of:
- P0355 Extending <chrono> to Calendars and Time Zones
- P1614 The Mothership has Landed
Implements:
- P1982 Rename link to time_zone_link
In D144319, Clang tried to land a change that would cause some functions
that are not supposed to return nullptr to optimize better. As reported
in https://reviews.llvm.org/D144319#4203982, libc++ started seeing
failures in its CI shortly after this change was landed.
As explained in D146379, the reason for these failures is that libc++'s
throwing `operator new` can in fact return nullptr when compiled with
exceptions disabled. However, this contradicts the Standard, which
clearly says that the throwing version of `operator new(size_t)` should
never return nullptr. This is actually a long standing issue. I've
previously seen a case where LTO would optimize incorrectly based on the
assumption that `operator new` doesn't return nullptr, an assumption
that was violated in that case because libc++.dylib was compiled with
-fno-exceptions.
Unfortunately, fixing this is kind of tricky. The Standard has a few
requirements for the allocation functions, some of which are impossible
to satisfy under -fno-exceptions:
1. `operator new(size_t)` must never return nullptr
2. `operator new(size_t, nothrow_t)` must call the throwing version and
return nullptr on failure to allocate
3. We can't throw exceptions when compiled with -fno-exceptions
In the case where exceptions are enabled, things work nicely.
`new(size_t)` throws and `new(size_t, nothrow_t)` uses a try-catch to
return nullptr. However, when compiling the library with
-fno-exceptions, we can't throw an exception from `new(size_t)`, and we
can't catch anything from `new(size_t, nothrow_t)`. The only thing we
can do from `new(size_t)` is actually abort the program, which does not
make it possible for `new(size_t, nothrow_t)` to catch something and
return nullptr.
This patch makes the following changes:
1. When compiled with -fno-exceptions, the throwing version of `operator
new` will now abort on failure instead of returning nullptr on failure.
This resolves the issue that the compiler could mis-compile based on the
assumption that nullptr is never returned. This constitutes an API and
ABI breaking change for folks compiling the library with -fno-exceptions
(which is not the general public, who merely uses libc++ headers but use
a shared library that has already been compiled). This should mostly
impact vendors and other folks who compile libc++.dylib themselves.
2. When the library is compiled with -fexceptions, the nothrow version
of `operator new` has no change. When the library is compiled with
-fno-exceptions, the nothrow version of `operator new` will now check
whether the throwing version of `operator new` has been overridden. If
it has not been overridden, then it will use an implementation
equivalent to that of the throwing `operator new`, except it will return
nullptr on failure to allocate (instead of terminating). However, if the
throwing `operator new` has been overridden, it is now an error NOT to
also override the nothrow `operator new`. Indeed, there is no way for us
to implement a valid nothrow `operator new` without knowing the exact
implementation of the throwing version.
In summary, this change will impact people who fall into the following
intersection of conditions:
- They use the libc++ shared/static library built with `-fno-exceptions`
- They do not override `operator new(..., std::nothrow_t)`
- They override `operator new(...)` (the throwing version)
- They use `operator new(..., std::nothrow_t)`
We believe this represents a small number of people.
Fixes#60129
rdar://103958777
Differential Revision: https://reviews.llvm.org/D150610
Introduce a new `argument-within-domain` category that covers cases
where the given arguments make it impossible to produce a correct result
(or create a valid object in case of constructors). While the incorrect
result doesn't create an immediate problem within the library (like e.g.
a null pointer dereference would), it always indicates a logic error in
user code and is highly likely to lead to a bug in the program once the
value is used.
Also introduce `_LIBCPP_ASSERT_PEDANTIC` for assertions violating which
results in a no-op or other benign behavior, but which may nevertheless
indicate a bug in the invoking code.
This patch runs clang-format on all of libcxx/include and libcxx/src, in
accordance with the RFC discussed at [1]. Follow-up patches will format
the benchmarks, the test suite and remaining parts of the code. I'm
splitting this one into its own patch so the diff is a bit easier to
review.
This patch was generated with:
find libcxx/include libcxx/src -type f \
| grep -v 'module.modulemap.in' \
| grep -v 'CMakeLists.txt' \
| grep -v 'README.txt' \
| grep -v 'libcxx.imp' \
| grep -v '__config_site.in' \
| xargs clang-format -i
A Git merge driver is available in libcxx/utils/clang-format-merge-driver.sh
to help resolve merge and rebase issues across these formatting changes.
[1]: https://discourse.llvm.org/t/rfc-clang-formatting-all-of-libc-once-and-for-all
In preparation for running clang-format on the whole code base, we are
also removing mentions of the legacy _LIBCPP_INLINE_VISIBILITY macro in
favor of the newer _LIBCPP_HIDE_FROM_ABI.
We're still leaving the definition of _LIBCPP_INLINE_VISIBILITY to avoid
creating needless breakage in case some older patches are checked-in
with mentions of the old macro. After we branch for LLVM 18, we can do
another pass to clean up remaining uses of the macro that might have
gotten introduced by mistake (if any) and remove the macro itself at the
same time. This is just a minor convenience to smooth out the transition
as much as possible.
See
https://discourse.llvm.org/t/rfc-clang-formatting-all-of-libc-once-and-for-all
for the clang-format proposal.
This is necessary in order to implement some papers like P2467R1, which
require using C++23 declarations in the dylib. It is a good habit to
keep building the dylib with a recent standard version regardless.
With this patch, we also stop strictly enforcing that the targets are
built with C++23. Concretely, C++23 will soon be required in order to
build the dylib, but not enforcing it strictly works around some issues
like the documentation bots using an old and unsupported compiler. Since
these bots do not actually build the library, not strictly enforcing the
C++ Standard makes our CMake build more resilient to these kinds of
situation. This is just a workaround though, the better way of going
about would be to update the compiler on the documentation bot but we
don't seem to have control over that.
Replace most uses of `_LIBCPP_ASSERT` with
`_LIBCPP_ASSERT_UNCATEGORIZED`.
This is done as a prerequisite to introducing hardened mode to libc++.
The idea is to make enabling assertions an opt-in with (somewhat)
fine-grained controls over which categories of assertions are enabled.
The vast majority of assertions are currently uncategorized; the new
macro will allow turning on `_LIBCPP_ASSERT` (the underlying mechanism
for all kinds of assertions) without enabling all the uncategorized
assertions (in the future; this patch preserves the current behavior).
Differential Revision: https://reviews.llvm.org/D153816
This was contributed ~10 years ago, but we don't officially support it
and I am not aware of any bot testing it, so this has likely rotten to
the point where it is unusable.
Differential Revision: https://reviews.llvm.org/D138680
This file was added before we started granularizing the headers, but is essentially just a granularized header. This moves the header to the correct place.
Reviewed By: #libc, EricWF
Spies: libcxx-commits, arichardson, mikhail.ramalho
Differential Revision: https://reviews.llvm.org/D146395
This patch bumps the minimum macOS version for building the dylib
or back-deploying a statically-linked libc++ from macOS 10.11 to
macOS 10.13. AFAICT, Chrome was the last one to require macOS 10.11,
but since then they have bumped their minimal supported version to
macOS 10.13.
Differential Revision: https://reviews.llvm.org/D145012
Implements:
- P2291R3 Add Constexpr Modifiers to Functions to_chars and from_chars for
Integral Types in <charconv> Header
Reviewed By: #libc, ldionne
Differential Revision: https://reviews.llvm.org/D131317
This was noticed in the review of D125704. In that commit only the new
table has been adapted. This adapts the existing tables.
Note since libc++'s charconv is backported to C++11 it's not possible to
use inline constexpr variables. The were introduced in C++17.
Reviewed By: #libc, ldionne
Differential Revision: https://reviews.llvm.org/D126887
This removes the duplicated code from the dylib. Instead the dylib will
call the new functions in the header. Since this code is unneeded it's
removed from the unstable ABI.
Depends on D125704
Reviewed By: #libc, ldionne
Differential Revision: https://reviews.llvm.org/D125761
This is the first step towards disentangling the debug mode and assertions
in libc++. This patch doesn't make any functional change: it simply moves
_LIBCPP_ASSERT-related stuff to its own file so as to make it clear that
libc++ assertions and the debug mode are different things. Future patches
will make it possible to enable assertions without enabling the debug
mode.
Differential Revision: https://reviews.llvm.org/D119769
Our best guess is that the two syntaxes should have exactly equivalent
effects, so, let's be consistent with what we do in libcxx/include/.
I've left `#include "include/x.h"` and `#include "../y.h"` alone
because I'm less sure that they're interchangeable, and they aren't
inconsistent with libcxx/include/ because libcxx/include/ never
does that kind of thing.
Also, use the `_LIBCPP_PUSH_MACROS/POP_MACROS` dance for `<__undef_macros>`,
even though it's technically unnecessary in a standalone .cpp file,
just so we have consistently one way to do it.
Differential Revision: https://reviews.llvm.org/D119561
This fixes warnings about implicitly declared `_umul128` and
`__shiftright128` when building for x86_64 with clang-cl.
Use `_MSC_VER` instead of `_LIBCPP_COMPILER_MSVC` for enabling MSVC
specific code; `_MSC_VER` is defined both in clang-cl and MSVC,
while `_LIBCPP_COMPILER_MSVC` only is defined if building with the
actual MSVC compiler.
Include `ryu.h` at the head of `d2s_intrinsics.h`, as it uses
the `_LIBCPP_64_BIT` define, which is defined in `ryu.h`.
Now the Ryu files build without warnings with clang-cl for i386,
x86_64, arm and aarch64.
Differential Revision: https://reviews.llvm.org/D119647
Microsoft would like to contribute its implementation of floating-point to_chars to libc++. This uses the impossibly fast Ryu and Ryu Printf algorithms invented by Ulf Adams at Google. Upstream repos: https://github.com/microsoft/STL and https://github.com/ulfjack/ryu .
Licensing notes: MSVC's STL is available under the Apache License v2.0 with LLVM Exception, intentionally chosen to match libc++. We've used Ryu under the Boost Software License.
This patch contains minor changes from Jorg Brown at Google, to adapt the code to libc++. He verified that it works in Google's Linux-based environment, but then I applied more changes on top of his, so any compiler errors are my fault. (I haven't tried to build and test libc++ yet.) Please tell me if we need to do anything else in order to follow https://llvm.org/docs/DeveloperPolicy.html#attribution-of-changes .
Notes:
* libc++'s integer charconv is unchanged (except for a small refactoring). MSVC's integer charconv hasn't been tuned for performance yet, so you're not missing anything.
* Floating-point from_chars isn't part of this patch because Jorg found that MSVC's implementation (derived from our CRT's strtod) was slower than Abseil's. If you're unable to use Abseil or another implementation due to licensing or technical considerations, Microsoft would be delighted if you used MSVC's from_chars (and you can just take it, or ask us to provide a patch like this). Ulf is also working on a novel algorithm for from_chars.
* This assumes that float is IEEE 32-bit, double is IEEE 64-bit, and long double is also IEEE 64-bit.
* I have added MSVC's charconv tests (the whole thing: integer/floating from_chars/to_chars), but haven't adapted them to libcxx's harness at all. (These tests will be available in the microsoft/STL repo soon.)
* Jorg added int128 codepaths. These were originally present in upstream Ryu, and I removed them from microsoft/STL purely for performance reasons (MSVC doesn't support int128; Clang on Windows does, but I found that x64 intrinsics were slightly faster).
* The implementation is split into 3 headers. In MSVC's STL, charconv contains only Microsoft-written code. xcharconv_ryu.h contains code derived from Ryu (with significant modifications and additions). xcharconv_ryu_tables.h contains Ryu's large lookup tables (they were sufficiently large to make editing inconvenient, hence the separate file). The xmeow.h convention is MSVC's for internal headers; you may wish to rename them.
* You should consider separately compiling the lookup tables (see https://github.com/microsoft/STL/issues/172 ) for compiler throughput and reduced object file size.
* See https://github.com/StephanTLavavej/llvm-project/commits/charconv for fine-grained history. (If necessary, I can perform some rebase surgery to show you what Jorg changed relative to the microsoft/STL repo; currently that's all fused into the first commit.)
Differential Revision: https://reviews.llvm.org/D70631
Microsoft would like to contribute its implementation of floating-point to_chars to libc++. This uses the impossibly fast Ryu and Ryu Printf algorithms invented by Ulf Adams at Google. Upstream repos: https://github.com/microsoft/STL and https://github.com/ulfjack/ryu .
Licensing notes: MSVC's STL is available under the Apache License v2.0 with LLVM Exception, intentionally chosen to match libc++. We've used Ryu under the Boost Software License.
This patch contains minor changes from Jorg Brown at Google, to adapt the code to libc++. He verified that it works in Google's Linux-based environment, but then I applied more changes on top of his, so any compiler errors are my fault. (I haven't tried to build and test libc++ yet.) Please tell me if we need to do anything else in order to follow https://llvm.org/docs/DeveloperPolicy.html#attribution-of-changes .
Notes:
* libc++'s integer charconv is unchanged (except for a small refactoring). MSVC's integer charconv hasn't been tuned for performance yet, so you're not missing anything.
* Floating-point from_chars isn't part of this patch because Jorg found that MSVC's implementation (derived from our CRT's strtod) was slower than Abseil's. If you're unable to use Abseil or another implementation due to licensing or technical considerations, Microsoft would be delighted if you used MSVC's from_chars (and you can just take it, or ask us to provide a patch like this). Ulf is also working on a novel algorithm for from_chars.
* This assumes that float is IEEE 32-bit, double is IEEE 64-bit, and long double is also IEEE 64-bit.
* I have added MSVC's charconv tests (the whole thing: integer/floating from_chars/to_chars), but haven't adapted them to libcxx's harness at all. (These tests will be available in the microsoft/STL repo soon.)
* Jorg added int128 codepaths. These were originally present in upstream Ryu, and I removed them from microsoft/STL purely for performance reasons (MSVC doesn't support int128; Clang on Windows does, but I found that x64 intrinsics were slightly faster).
* The implementation is split into 3 headers. In MSVC's STL, charconv contains only Microsoft-written code. xcharconv_ryu.h contains code derived from Ryu (with significant modifications and additions). xcharconv_ryu_tables.h contains Ryu's large lookup tables (they were sufficiently large to make editing inconvenient, hence the separate file). The xmeow.h convention is MSVC's for internal headers; you may wish to rename them.
* You should consider separately compiling the lookup tables (see https://github.com/microsoft/STL/issues/172 ) for compiler throughput and reduced object file size.
* See https://github.com/StephanTLavavej/llvm-project/commits/charconv for fine-grained history. (If necessary, I can perform some rebase surgery to show you what Jorg changed relative to the microsoft/STL repo; currently that's all fused into the first commit.)
Differential Revision: https://reviews.llvm.org/D70631
We've stopped doing it in libc++ for a while now because these names
would end up rotting as we move things around and copy/paste stuff.
This cleans up all the existing files so as to stop the spreading
as people copy-paste headers around.
The file was a duplicate of atomic_support.h in libc++. Since we now
require the libc++ sources in order to build libc++abi, it's OK to
remove this duplication.
Thanks to @chandlerc for noticing this.
Differential Revision: https://reviews.llvm.org/D110103
There is a lot more we can do, in particular in <type_traits>, but this
removes some workarounds that were gated on checking a specific compiler
version.
Differential Revision: https://reviews.llvm.org/D108923
