When `-import-declaration` option is enabled, declaration import is
supported for functions. https://github.com/llvm/llvm-project/pull/88024
has the context for this option.
This patch supports declaration import for global variables in
distributed ThinLTO. The motivating use case is to propagate `dso_local`
attribute of global variables across modules, to optimize global
variable access when a binary is built with
`-fno-direct-access-external-data`.
* With `-fdirect-access-external-data`, non thread-local global
variables will [have `dso_local`
attributes](fe3c23b439/clang/lib/CodeGen/CodeGenModule.cpp (L1730-L1746)).
This optimizes the global variable access as shown by
https://gcc.godbolt.org/z/vMzWcKdh3
CallStackRadixTreeBuilder::build takes the parameter
MemProfFrameIndexes by value, involving copies:
std::optional<const llvm::DenseMap<FrameIdTy, LinearFrameId>>
MemProfFrameIndexes
Then "build" makes another copy of MemProfFrameIndexe and passes it to
encodeCallStack for every call stack, which is painfully slow.
This patch changes the type to a pointer so that we don't have to make
a copy every time we pass the argument.
Without this patch, it takes 553 seconds to run "llvm-profdata merge"
on a large MemProf raw profile. This patch shortenes that down to 67
seconds.
This reverts commit fdb050a5024320ec29d2edf3f2bc686c3a84abaa, and
restores ccb4702038900d82d1041ff610788740f5cef723, with a fix for build
bot failures.
Specifically, add ProfileData to the dependences of the BitWriter
library, which was causing shared library builds of LLVM to fail.
Reproduced the failure with a shared library build and confirmed this
change fixes that build failure.
Leverage the support added to represent allocation contexts in a more
compact way via a radix tree in the indexed profile to similarly reduce
sizes of the bitcode summaries.
For a large target, this reduced the size of the per-module summaries by
about 18% and in the distributed combined index files by 28%.
Currently, both
[TypeIdMap](67a1fdb014/llvm/include/llvm/IR/ModuleSummaryIndex.h (L1356))
and
[TypeIdCompatibleVtableMap](67a1fdb014/llvm/include/llvm/IR/ModuleSummaryIndex.h (L1363))
keep type-id as `std::string` in the combined index for LTO indexing
analysis.
With this change, index uses a unique-string-saver to own the string
copies and two maps above can use string references to save some memory.
This shows a 3% memory reduction (from 8.2GiB to 7.9GiB) in an internal
binary with high indexing memory usage.
The stack ids are hashes that are close to 64 bits in size, so emitting
as a pair of 32-bit fixed-width values is more efficient than a VBR.
This reduced the summary bitcode size for a large target by about 1%.
Bump the index version and ensure we can read the old format.
Improve the information printed when -memprof-report-hinted-sizes is
enabled. Now print the full context hash computed from the original
profile, similar to what we do when reporting matching statistics. This
will make it easier to correlate with the profile.
Note that the full context hash must be computed at profile match time
and saved in the metadata and summary, because we may trim the context
during matching when it isn't needed for distinguishing hotness.
Similarly, due to the context trimming, we may have more than one full
context id and total size pair per MIB in the metadata and summary,
which now get a list of these pairs.
Remove the old aggregate size from the metadata and summary support.
One other change from the prior support is that we no longer write the
size information into the combined index for the LTO backends, which
don't use this information, which reduces unnecessary bloat in
distributed index files.
Add a specification attribute to LLVM DebugInfo, which is analogous
to DWARF's DW_AT_specification. According to the DWARF spec:
"A debugging information entry that represents a declaration that
completes another (earlier) non-defining declaration may have a
DW_AT_specification attribute whose value is a reference to the
debugging information entry representing the non-defining declaration."
This patch allows types to be specifications of other types. This is
used by Swift to represent generic types. For example, given this Swift
program:
```
struct MyStruct<T> {
let t: T
}
let variable = MyStruct<Int>(t: 43)
```
The Swift compiler emits (roughly) an unsubtituted type for MyStruct<T>:
```
DW_TAG_structure_type
DW_AT_name ("MyStruct")
// "$s1w8MyStructVyxGD" is a Swift mangled name roughly equivalent to
// MyStruct<T>
DW_AT_linkage_name ("$s1w8MyStructVyxGD")
// other attributes here
```
And a specification for MyStruct<Int>:
```
DW_TAG_structure_type
DW_AT_specification (<link to "MyStruct">)
// "$s1w8MyStructVySiGD" is a Swift mangled name equivalent to
// MyStruct<Int>
DW_AT_linkage_name ("$s1w8MyStructVySiGD")
DW_AT_byte_size (0x08)
// other attributes here
```
An extra inhabitant is a bit pattern that does not represent a valid
value for instances of a given type. The number of extra inhabitants is
the number of those bit configurations.
This is used by Swift to save space when composing types. For example,
because Bool only needs 2 bit patterns to represent all of its values
(true and false), an Optional<Bool> only occupies 1 byte in memory by
using a bit configuration that is unused by Bool. Which bit patterns are
unused are part of the ABI of the language.
Since Swift generics are not monomorphized, by using dynamic libraries
you can have generic types whose size, alignment, etc, are known only
at runtime (which is why this feature is needed).
This patch adds num_extra_inhabitants to LLVM-IR debug info and in DWARF
as an Apple extension.
# What
This PR renames the newly-introduced llvm attribute
`sanitize_realtime_unsafe` to `sanitize_realtime_blocking`. Likewise,
sibling variables such as `SanitizeRealtimeUnsafe` are renamed to
`SanitizeRealtimeBlocking` respectively. There are no other functional
changes.
# Why?
- There are a number of problems that can cause a function to be
real-time "unsafe",
- we wish to communicate what problems rtsan detects and *why* they're
unsafe, and
- a generic "unsafe" attribute is, in our opinion, too broad a net -
which may lead to future implementations that need extra contextual
information passed through them in order to communicate meaningful
reasons to users.
- We want to avoid this situation and make the runtime library boundary
API/ABI as simple as possible, and
- we believe that restricting the scope of attributes to names like
`sanitize_realtime_blocking` is an effective means of doing so.
We also feel that the symmetry between `[[clang::blocking]]` and
`sanitize_realtime_blocking` is easier to follow as a developer.
# Concerns
- I'm aware that the LLVM attribute `sanitize_realtime_unsafe` has been
part of the tree for a few weeks now (introduced here:
https://github.com/llvm/llvm-project/pull/106754). Given that it hasn't
been released in version 20 yet, am I correct in considering this to not
be a breaking change?
A call to a function that has this attribute is not a source of
divergence, as used by UniformityAnalysis. That allows a front-end to
use known-name calls as an instruction extension mechanism (e.g.
https://github.com/GPUOpen-Drivers/llvm-dialects ) without such a call
being a source of divergence.
This change implements support of metadata strings in operand bundle
values. It makes possible calls like:
call void @some_func(i32 %x) [ "foo"(i32 42, metadata !"abc") ]
It requires some extension of the bitcode serialization. As SSA values
and metadata are stored in different tables, there must be a way to
distinguish them during deserialization. It is implemented by putting a
special marker before the metadata index. The marker cannot be treated
as a reference to any SSA value, so it unambiguously identifies
metadata. It allows extending the bitcode serialization without breaking
compatibility.
Metadata as operand bundle values are intended to be used in
floating-point function calls. They would represent the same information
as now is passed by the constrained intrinsic arguments.
For the purpose of verifying proper arguments extensions per the target's ABI,
introduce the NoExt attribute that may be used by a target when neither sign-
or zeroextension is required (e.g. with a struct in register). The purpose of
doing so is to be able to verify that there is always one of these attributes
present and by this detecting cases where sign/zero extension is actually
missing.
As a first step, this patch has the verification step done for the SystemZ
backend only, but left off by default until all known issues have been
addressed.
Other targets/front-ends can now also add NoExt attribute where needed and do
this check in the backend.
This patch is the frontend implementation of the coroutine elide
improvement project detailed in this discourse post:
https://discourse.llvm.org/t/language-extension-for-better-more-deterministic-halo-for-c-coroutines/80044
This patch proposes a C++ struct/class attribute
`[[clang::coro_await_elidable]]`. This notion of await elidable task
gives developers and library authors a certainty that coroutine heap
elision happens in a predictable way.
Originally, after we lower a coroutine to LLVM IR, CoroElide is
responsible for analysis of whether an elision can happen. Take this as
an example:
```
Task foo();
Task bar() {
co_await foo();
}
```
For CoroElide to happen, the ramp function of `foo` must be inlined into
`bar`. This inlining happens after `foo` has been split but `bar` is
usually still a presplit coroutine. If `foo` is indeed a coroutine, the
inlined `coro.id` intrinsics of `foo` is visible within `bar`. CoroElide
then runs an analysis to figure out whether the SSA value of
`coro.begin()` of `foo` gets destroyed before `bar` terminates.
`Task` types are rarely simple enough for the destroy logic of the task
to reference the SSA value from `coro.begin()` directly. Hence, the pass
is very ineffective for even the most trivial C++ Task types. Improving
CoroElide by implementing more powerful analyses is possible, however it
doesn't give us the predictability when we expect elision to happen.
The approach we want to take with this language extension generally
originates from the philosophy that library implementations of `Task`
types has the control over the structured concurrency guarantees we
demand for elision to happen. That is, the lifetime for the callee's
frame is shorter to that of the caller.
The ``[[clang::coro_await_elidable]]`` is a class attribute which can be
applied to a coroutine return type.
When a coroutine function that returns such a type calls another
coroutine function, the compiler performs heap allocation elision when
the following conditions are all met:
- callee coroutine function returns a type that is annotated with
``[[clang::coro_await_elidable]]``.
- In caller coroutine, the return value of the callee is a prvalue that
is immediately `co_await`ed.
From the C++ perspective, it makes sense because we can ensure the
lifetime of elided callee cannot exceed that of the caller if we can
guarantee that the caller coroutine is never destroyed earlier than the
callee coroutine. This is not generally true for any C++ programs.
However, the library that implements `Task` types and executors may
provide this guarantee to the compiler, providing the user with
certainty that HALO will work on their programs.
After this patch, when compiling coroutines that return a type with such
attribute, the frontend checks that the type of the operand of
`co_await` expressions (not `operator co_await`). If it's also
attributed with `[[clang::coro_await_elidable]]`, the FE emits metadata
on the call or invoke instruction as a hint for a later middle end pass
to elide the elision.
The original patch version is
https://github.com/llvm/llvm-project/pull/94693 and as suggested, the
patch is split into frontend and middle end solutions into stacked PRs.
The middle end CoroSplit patch can be found at
https://github.com/llvm/llvm-project/pull/99283
The middle end transformation that performs the elide can be found at
https://github.com/llvm/llvm-project/pull/99285
The primary motivation is to remove `EntryCount` from `FunctionSummary`.
This frees 8 bytes out of `sizeof(FunctionSummary)` (136 bytes as of
64498c5483).
While I'm at it, this PR clean up {SummaryBasedOptimizations,
SyntheticCountsPropagation} since they were not used and there are no
plans to further invest on them.
With this patch, bitcode writer writes a placeholder 0 at the byte
offset of `EntryCount` and bitcode reader can parse the function entry
count at the correct byte offset. Added a TODO to stop writing
`EntryCount` and bump bitcode version
This reverts commit 178fc4779ece31392a2cd01472b0279e50b3a199.
This attribute was not needed now that we are using the lsan style
ScopedDisabler for disabling this sanitizer
See #106736#106125
For more discussion
This retries #90692 which was reverted previously due to issues with
lld-available being set, even if the copy of lld is not built from
source.
This does not change any code compared to #90692 to address the
lld-available issue.
The main change w.r.t, lld-available is xfailing tests in PR #99056
(until a longer term fix is available).
This patch introduces type alias ModuleToSummariesForIndexTy.
I'm planning to change the type slightly to allow heterogeneous lookup
(that is, std::map<K, V, std::less<>>) in a subsequent patch. The
problem is that changing the type affects many places. Using a type
alias reduces the impact.
DefOrUseGUIDs is used only for membership checking purposes. We don't
need std::set's strengths like iterators staying valid or the ability
to traverse in a sorted order.
While I am at it, this patch replaces count with contains for slightly
increased readability.
It is now translated to `<1 x i64>`, which allows the removal of a bunch
of special casing.
This _incompatibly_ changes the ABI of any LLVM IR function with
`x86_mmx` arguments or returns: instead of passing in mmx registers,
they will now be passed via integer registers. However, the real-world
incompatibility caused by this is expected to be minimal, because Clang
never uses the x86_mmx type -- it lowers `__m64` to either `<1 x i64>`
or `double`, depending on ABI.
This change does _not_ eliminate the SelectionDAG `MVT::x86mmx` type.
That type simply no longer corresponds to an IR type, and is used only
by MMX intrinsics and inline-asm operands.
Because SelectionDAGBuilder only knows how to generate the
operands/results of intrinsics based on the IR type, it thus now
generates the intrinsics with the type MVT::v1i64, instead of
MVT::x86mmx. We need to fix this before the DAG LegalizeTypes, and thus
have the X86 backend fix them up in DAGCombine. (This may be a
short-lived hack, if all the MMX intrinsics can be removed in upcoming
changes.)
Works towards issue #98272.
If requested, via the -memprof-report-hinted-sizes option, track the
total profiled size of each MIB through the thin link, then report on
the corresponding allocation coldness after all cloning is complete.
To save size, a different bitcode record type is used for the allocation
info when the option is specified, and the sizes are kept separate from
the MIBs in the index.
https://github.com/llvm/llvm-project/pull/87600 was reverted in order to
revert
6262763341.
Now https://github.com/llvm/llvm-project/pull/95482 is fix forward for
6262763341.
This patch is a reland for
https://github.com/llvm/llvm-project/pull/87600
**Changes on top of original patch**
In `llvm/include/llvm/IR/ModuleSummaryIndex.h`, make the type of
`GVSummaryPtrSet` an `unordered_set` which is more memory efficient when
the number of elements is smaller than 128 [1]
**Original commit message**
For distributed ThinLTO, the LTO indexing step generates combined
summary for each module, and postlink pipeline reads the combined
summary which stores the information for link-time optimization.
This patch populates the 'import type' of a summary in bitcode, and
updates bitcode reader to parse the bit correctly.
[1]
393eff4e02/llvm/lib/Support/SmallPtrSet.cpp (L43)
This patch augments the HIPAMD driver to allow it to target AMDGCN
flavoured SPIR-V compilation. It's mostly straightforward, as we re-use
some of the existing SPIRV infra, however there are a few notable
additions:
- we introduce an `amdgcnspirv` offload arch, rather than relying on
using `generic` (this is already fairly overloaded) or simply using
`spirv` or `spirv64` (we'll want to use these to denote unflavoured
SPIRV, once we bring up that capability)
- initially it is won't be possible to mix-in SPIR-V and concrete AMDGPU
targets, as it would require some relatively intrusive surgery in the
HIPAMD Toolchain and the Driver to deal with two triples
(`spirv64-amd-amdhsa` and `amdgcn-amd-amdhsa`, respectively)
- in order to retain user provided compiler flags and have them
available at JIT time, we rely on embedding the command line via
`-fembed-bitcode=marker`, which the bitcode writer had previously not
implemented for SPIRV; we only allow it conditionally for AMDGCN
flavoured SPIRV, and it is handled correctly by the Translator (it ends
up as a string literal)
Once the SPIRV BE is no longer experimental we'll switch to using that
rather than the translator. There's some additional work that'll come
via a separate PR around correctly piping through AMDGCN's
implementation of `printf`, for now we merely handle its flags
correctly.
Extend `DIBasicType` and `DISubroutineType` with additional field
`annotations`, e.g. as below:
```
!5 = !DIBasicType(name: "int", size: 32, encoding: DW_ATE_signed, annotations: !6)
!6 = !{!7}
!7 = !{!"btf:type_tag", !"tag1"}
```
The field would be used by BPF backend to generate DWARF attributes
corresponding to `btf_type_tag` type attributes, e.g.:
```
0x00000029: DW_TAG_base_type
DW_AT_name ("int")
DW_AT_encoding (DW_ATE_signed)
DW_AT_byte_size (0x04)
0x0000002d: DW_TAG_LLVM_annotation
DW_AT_name ("btf:type_tag")
DW_AT_const_value ("tag1")
```
Such DWARF entries would be used to generate BTF definitions by tools
like [pahole](https://github.com/acmel/dwarves).
Note: similar fields with similar purposes are already present in
DIDerivedType and DICompositeType.
Currently "btf_type_tag" attributes are represented in debug information
as 'annotations' fields in DIDerivedType with DW_TAG_pointer_type tag.
The annotation on a pointer corresponds to pointee having the attributes
in the final BTF.
The discussion in
[thread](https://lore.kernel.org/bpf/87r0w9jjoq.fsf@oracle.com/) came to
conclusion, that such annotations should apply to the annotated type
itself. Hence the necessity to extend `DIBasicType` & `DISubroutineType`
types with 'annotations' field to represent cases like below:
```
int __attribute__((btf_type_tag("foo"))) bar;
```
This was previously tracked as differential revision:
https://reviews.llvm.org/D143966
Remove support for the icmp and fcmp constant expressions.
This is part of:
https://discourse.llvm.org/t/rfc-remove-most-constant-expressions/63179
As usual, many of the updated tests will no longer test what they were
originally intended to -- this is hard to preserve when constant
expressions get removed, and in many cases just impossible as the
existence of a specific kind of constant expression was the cause of the
issue in the first place.
A cycle profile of a thin link showed a lot of time spent in sort called
from the BitcodeWriter, which was being used to compute the unique
references to stack ids in the summaries emitted for each backend in a
distributed thinlto build. We were also frequently invoking lower_bound
to locate stack id indices in the resulting vector when writing out the
referencing memprof records.
Change this to use a map to uniquify the references, and to hold the
index of the corresponding stack id in the StackIds vector, which is
now populated at the same time.
This reduced the time of a large thin link by about 10%.
PR #92983 accidentally changed the buffer allocation in
`llvm::WriteBitcodeToFile` to be allocated on the stack, which is
problematic given it's a large-ish buffer (256K)
- added unittests for the raw_fd_stream output case.
- the `BitstreamWriter` ctor was confusing, the relationship between the buffer and the file stream wasn't clear and in fact there was a potential bug in `BitcodeWriter` in the mach-o case, because that code assumed in-buffer only serialization. The incremental flushing behavior of flushing at end of block boundaries was an implementation detail that meant serializers not using blocks (for example) would need to know to check the buffer and flush. The bug was latent - in the sense that, today, because the stream being passed was not a `raw_fd_stream`, incremental buffering never kicked in.
The new design moves the responsibility of flushing to the `BitstreamWriter`, and makes it work with any `raw_ostream` (but incrementally flush only in the `raw_fd_stream` case). If the `raw_ostream` is over a buffer - i.e. a `raw_svector_stream` - then it's equivalent to today's buffer case. For all other `raw_ostream` cases, buffering is an implementation detail. In all cases, the buffer is flushed (well, in the buffer case, that's a moot statement).
This simplifies the state and state transitions the user has to track: you have a raw_ostream -> BitstreamWrite in it -> destroy the writer => the bitstream is completely written in your raw_ostream. The "buffer" case and the "raw_fd_stream" case become optimizations rather than imposing state transition concerns to the user.
This defines a new kind of IR Constant that represents a ptrauth signed
pointer, as used in AArch64 PAuth.
It allows representing most kinds of signed pointer constants used thus
far in the llvm ptrauth implementations, notably those used in the
Darwin and ELF ABIs being implemented for c/c++. These signed pointer
constants are then lowered to ELF/MachO relocations.
These can be simply thought of as a constant `llvm.ptrauth.sign`, with
the interesting addition of discriminator computation: the `ptrauth`
constant can also represent a combined blend, when both address and
integer discriminator operands are used. Both operands are otherwise
optional, with default values 0/null.
This implements the `nusw` and `nuw` flags for `getelementptr` as
proposed at
https://discourse.llvm.org/t/rfc-add-nusw-and-nuw-flags-for-getelementptr/78672.
The three possible flags are encapsulated in the new `GEPNoWrapFlags`
class. Currently this class has a ctor from bool, interpreted as the
InBounds flag. This ctor should be removed in the future, as code gets
migrated to handle all flags.
There are a few places annotated with `TODO(gep_nowrap)`, where I've had
to touch code but opted to not infer or precisely preserve the new
flags, so as to keep this as NFC as possible and make sure any changes
of that kind get test coverage when they are made.
For distributed ThinLTO, the LTO indexing step generates combined
summary for each module, and postlink pipeline reads the combined
summary which stores the information for link-time optimization.
This patch populates the 'import type' of a summary in bitcode, and
updates bitcode reader to parse the bit correctly.
Reverts llvm/llvm-project#90692
Breaking PPC buildbots. The bots are not meant to test LLD, but are
running a test that is using an old version of LLD without the change
(so is incompatible). Revert until a fix is found.
This reverts commit 2aabfc811670beb843074c765c056fff4a7b443b.
Add fixes to LLD and Gold tests missed in original change.
Co-authored-by: Jan Voung <jvoung@google.com>
