This updates all the extensions to their version in the v0.11.0 spec.
All changes from this version are already implemented or are not
relevant to LLVM.
This change also alphabetises the lists of Xqci extensions, to make
future checks easier, and removes irrelevant info from the usage docs.
This Change adds support for two SiFive vendor attributes in clang:
- "SiFive-CLIC-preemptible"
- "SiFive-CLIC-stack-swap"
These can be given together, and can be combined with "machine", but
cannot be combined with any other interrupt attribute values.
These are handled primarily in RISCVFrameLowering:
- "SiFive-CLIC-stack-swap" entails swapping `sp` with `sf.mscratchcsw`
at function entry and exit, which holds the trap stack pointer.
- "SiFive-CLIC-preemptible" entails saving `mcause` and `mepc` before
re-enabling interrupts using `mstatus`. To save these, `s0` and `s1`
are first spilled to the stack, and then the values are read into
these registers. If these registers are used in the function, their
values will be spilled a second time onto the stack with the generic
callee-saved-register handling. At the end of the function interrupts
are disabled again before `mepc` and `mcause` are restored.
This Change also adds support for the following two experimental
extensions, which only contain CSRs:
- XSfsclic - for SiFive's CLIC Supervisor-Mode CSRs
- XSfmclic - for SiFive's CLIC Machine-Mode CSRs
The latter is needed for interrupt support.
The CFI information for this implementation is not correct, but I'd
prefer to correct this in a follow-up. While it's unlikely anyone wants
to unwind through a handler, the CFI information is also used by
debuggers so it would be good to get it right.
Co-authored-by: Ana Pazos <apazos@quicinc.com>
This extension adds two external input output instructions for
non-memory-mapped device.
The current spec can be found at:
https://github.com/quic/riscv-unified-db/releases/tag/Xqci-0.7.0
This patch adds assembler only support.
Co-authored-by: Sudharsan Veeravalli <quic_svs@quicinc.com>
With a minor fix for the build failures.
Original message:
This extension adds nine instructions, eight for non-memory-mapped devices synchronization and delay instruction.
The current spec can be found at:
https://github.com/quic/riscv-unified-db/releases/tag/Xqci-0.7.0
This patch adds assembler only support.
Co-authored-by: Sudharsan Veeravalli quic_svs@quicinc.com
This extension adds nine instructions, eight for non-memory-mapped
devices synchronization and delay instruction.
The current spec can be found at:
https://github.com/quic/riscv-unified-db/releases/tag/Xqci-0.7.0
This patch adds assembler only support.
Co-authored-by: Sudharsan Veeravalli <quic_svs@quicinc.com>
This extension adds 10 instructions that provide hints to the interface
simulation environment.
The current spec can be found at:
https://github.com/quic/riscv-unified-db/releases/
This patch adds assembler only support.
This extension adds twelve conditional branch instructions that use an
immediate operand for the source.
The current spec can be found at:
https://github.com/quic/riscv-unified-db/releases/tag/Xqci-0.7.0
This patch adds assembler only support.
Co-authored-by: Sudharsan Veeravalli <quic_svs@quicinc.com>
The Xqcili extension includes a two instructions that load large
immediates than is available with the base RISC-V ISA.
The current spec can be found at:
https://github.com/quic/riscv-unified-db/releases/tag/Xqci-0.7.0
This patch adds assembler only support.
I was reviewing encodings to put the disassembling of vendor
instructions after after standard instructions and found that these
overlap with c.fldsp and c.fsdsp.
The Xqci 0.7.0 spec just came out, with some updates to Xqciint,
bringing it to v0.4. The main update of any relevance is that
`qc.c.mienter` and `qc.c.mienter.nest` now update both the stack pointer
and the frame pointer (before, they only updated the stack pointer).
They both remain compatible with the frame pointer convention.
This change bumps the Xqciint version, and ensures that we don't emit
the unneeded frame pointer adjustment instruction after
`qc.c.mienter(.nest)`.
This extension adds thirty eight bit manipulation instructions.
The current spec can be found at:
https://github.com/quic/riscv-unified-db/releases/tag/Xqci-0.6
This patch adds assembler only support.
Co-authored-by: Sudharsan Veeravalli <quic_svs@quicinc.com>
Xqccmp is a new spec by Qualcomm that makes a vendor-specific effort to
solve the push/pop + frame pointers issue. Broadly, it takes the Zcmp
instructions and reverse the order they push/pop registers in, which
ends up matching the frame pointer convention.
This extension adds a new instruction not present in Zcmp,
`qc.cm.pushfp`, which will set `fp` to the incoming `sp` value after it
has pushed the registers.
This change duplicates the Zcmp implementation, with minor changes to
mnemonics (for the `qc.` prefix), predicates, and the addition of
`qc.cm.pushfp`. There is also new logic to prevent combining Xqccmp and
Zcmp. Xqccmp is kept separate to Xqci for decoding/encoding etc, as the
specs are separate today.
Specification:
https://github.com/quic/riscv-unified-db/releases/tag/Xqccmp_extension-0.1.0
This implements assembler support for the XRivosVisni custom/vendor
extension from Rivos Inc. which is defined in:
https://github.com/rivosinc/rivos-custom-extensions (See
src/xrivosvisni.adoc)
Codegen support will follow in separate changes.
This implements assembler support for the XRivosVizip custom/vendor
extension from Rivos Inc. which is defined in:
https://github.com/rivosinc/rivos-custom-extensions (See
src/xrivosvizip.adoc)
Codegen support will follow in a separate change.
This extension adds eight 48 bit load store instructions.
The current spec can be found at:
https://github.com/quic/riscv-unified-db/releases/latest
This patch adds assembler only support.
---------
Co-authored-by: Harsh Chandel <hchandel@qti.qualcomm.com>
This extension adds eleven instructions to accelerate interrupt
servicing.
The current spec can be found at:
https://github.com/quic/riscv-unified-db/releases/latest
This patch adds assembler only support.
---------
Co-authored-by: Harsh Chandel <hchandel@qti.qualcomm.com>
The Qualcomm uC Xqcicm extension adds 13 conditional move instructions.
The current spec can be found at:
https://github.com/quic/riscv-unified-db/releases/latest
This patch adds assembler only support.
---------
Co-authored-by: Harsh Chandel <hchandel@qti.qualcomm.com>
This extension adds 3 instructions that perform load-store address
calculation.
The current spec can be found at:
https://github.com/quic/riscv-unified-db/releases/latest
This patch adds assembler only support.
---------
Co-authored-by: Harsh Chandel <hchandel@qti.qualcomm.com>
Co-authored-by: Sudharsan Veeravalli <quic_svs@quicinc.com>
The Qualcomm uC Xqcics extension adds 8 conditional select instructions.
The current spec can be found at:
https://github.com/quic/riscv-unified-db/releases/latest
This patch adds assembler only support.
---------
Co-authored-by: Harsh Chandel <hchandel@qti.qualcomm.com>
