This patch implements vector_splice in tablegen for:
a) when the immediate is equal to -1 (Imm==1) and uses:
INSR + LASTB
For instance :
@llvm.experimental.vector.splice(Vector_1, Vector_2, -1)
@llvm.experimental.vector.splice(<A,B,C,D>, <E,F,G,H>, 1) ==> <D, E, F, G>
LAST RegLast, Vector_1 // RegLast = D
INSR Res, (Vector_1 >> 1), RegLast // Res = D + E, F, G
Differential Revision: https://reviews.llvm.org/D105633
This patch extends support for (scalable-vector) splats in the
DAGCombiner via the `ISD::matchBinaryPredicate` function, which enable a
variety of simple combines of constants.
Users of this function may now have to distinguish between
`BUILD_VECTOR` and `SPLAT_VECTOR` vector operands. The way of dealing
with this in-tree follows the approach added for
`ISD::matchUnaryPredicate` implemented in D94501.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D106575
If the rotation amount is a known splat, perform the modulo on the splat source, and then perform the splat. That way the amount-extension performed later by LowerScalarVariableShift can fold the splats away without any multiple-use issues.
Fixes one of the concerns raised on D104156
This is a minimum extension of D106607 to allow folding for
2 non-zero constantsi that can be materialized as immediates..
In the reduced test examples, we save 1 instruction by rolling
the constants into LEA/ADD. In the motivating test from the bullet
benchmark, we absorb both of the constant moves into add ops via
LEA magic, so we reduce by 2 instructions.
Differential Revision: https://reviews.llvm.org/D106684
As noticed on D105390 - we were hardwiring the depth limit for combining to VPERMI2W/VPERMI2B instructions. Not only had we made the limit too low, we hadn't accounted for slow/fast shuffles via the VariableCrossLaneShuffleDepth control
For types like s96, we don't want to clamp to s64, we want to first widen to
s128 and then narrow it. Otherwise we end up with impossible to legalize types.
I stumbled onto a case where our (sext_inreg (assertzexti32 (fptoui X)), i32)
isel pattern can cause an fcvt.wu and fcvt.lu to be emitted if
the assertzexti32 has an additional user. If we add a one use check
it would just cause a fcvt.lu followed by a sext.w when only need
a fcvt.wu to satisfy both users.
To mitigate this I've added custom isel and new ISD opcodes for
fcvt.wu. This allows us to keep know it started life as a conversion
to i32 without needing to match multiple nodes. ComputeNumSignBits
has been taught that this new nodes produces 33 sign bits. To
prevent regressions when we need to zero extend the result of an
(i32 (fptoui X)), I've added a DAG combine to convert it to an
(i64 (fptoui X)) before type legalization. In most cases this would
happen in InstCombine, but a zero_extend can be created for function
returns or arguments.
To keep everything consistent I've added new nodes for fptosi as well.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D106346
Many of the tests have used NEXT when DAG is more approprite. In
some cases single DAG lines have been used. Note that these are
manual tests because they're to complex for update_llc_test_checks.py
and so it's worth not relying too much on the ordered output.
I've also made the CHECK lines more uniform when it comes to the
ordering of things like LO/HI.
If value tracking can confirm that the cttz/ctlz source is known non-zero then we don't need to create a branch (which DAG will struggle to recover from).
Differential Revision: https://reviews.llvm.org/D106685
Most other registers are allocatable and therefore cannot be used.
This issue was flagged by the machine verifier, because reading other
registers is considered reading from an undefined register.
Differential Revision: https://reviews.llvm.org/D96969
This patch fixes some issues with the RORB pseudo instruction.
- A minor issue in which the instructions were said to use the SREG,
which is not true.
- An issue with the BLD instruction, which did not have an output operand.
- A major issue in which invalid instructions were generated. The fix
also reduce RORB from 4 to 3 instructions, so it's also a small
optimization.
These issues were flagged by the machine verifier.
Differential Revision: https://reviews.llvm.org/D96957
This patch makes sure shift instructions such as this one:
%result = shl i32 %n, %amount
are expanded just before the IR to SelectionDAG conversion to a loop so
that calls to non-existing library functions such as __ashlsi3 are
avoided. The generated code is currently pretty bad but there's a lot of
room for improvement: the shift itself can be done in just four
instructions.
Differential Revision: https://reviews.llvm.org/D96677
Previously, AVRTargetLowering::LowerCall attempted to keep stack stores
in order with chains. Perhaps this worked in the past, but it does not
work now: it appears that the SelectionDAG legalization phase removes
these chains. Therefore, I've removed these chains entirely to match
X86 (which, similar to AVR, also prefers to use push instructions over
stack-relative stores to set up a call frame). With this change, all the
stack stores are in a somewhat reasonable order.
Differential Revision: https://reviews.llvm.org/D97853
This patch introduces a pass that uses the Attributor to deduce AMDGPU specific attributes.
Reviewed By: jdoerfert, arsenm
Differential Revision: https://reviews.llvm.org/D104997
Replace the clang builtins and LLVM intrinsics for {f32x4,f64x2}.{pmin,pmax}
with standard codegen patterns. Since wasm_simd128.h uses an integer vector as
the standard single vector type, the IR for the pmin and pmax intrinsic
functions contains bitcasts that would not be there otherwise. Add extra codegen
patterns that can still select the pmin and pmax instructions in the presence of
these bitcasts.
Differential Revision: https://reviews.llvm.org/D106612
This patch adds a reduced test case which identifies an illegal vsetvli
inserted by the compiler. The compiler emits a vsetvli which is intended
to preserve VL with the SEW/LMUL ratio e32/m1 when in fact the VL could
have been set by e64/m2 in a predecessor block.
Differential Revision: https://reviews.llvm.org/D106286
Since we're changing VTYPE, we may change VLMAX which could
invalidate the previous VL. If we can't tell if it is safe we
should use an AVL of 1 instead of keeping the old VL.
This is a quick fix. We may want to thread VL to the pseudo
instruction instead of making up a value. That will require ISD
opcode changes and changes to the C intrinsic interface.
This fixes the issue raised in D106286.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D106403
This code tries to form a TEST from CMP+AND with an optional
truncate in between. If we looked through the truncate, we may
have extra bits in the AND mask that shouldn't participate in
the checks. Normally SimplifyDemendedBits takes care of this, but
the AND may have another user. So manually mask out any extra bits.
Fixes PR51175.
Differential Revision: https://reviews.llvm.org/D106634
This is not the transform direction we want in general,
but by the time we have a CMOV, we've already tried
everything else that could be better.
The transform increases the uses of the other add operand,
but that is safe according to Alive2:
https://alive2.llvm.org/ce/z/Yn6p-A
We could probably extend this to other binops (not just add).
This is the motivating pattern discussed in:
https://llvm.org/PR51069
The test with i8 shows a missed fold because there's a trunc
sitting in front of the add. That can be handled with a small
follow-up.
Differential Revision: https://reviews.llvm.org/D106607
This adds custom lowering for truncating stores when operating on
fixed length vectors in SVE. It also includes a DAG combine to
fold extends followed by truncating stores into non-truncating
stores in order to prevent this pattern appearing once truncating
stores are supported.
Currently truncating stores are not used in certain cases where
the size of the vector is larger than the target vector width.
Differential Revision: https://reviews.llvm.org/D104471
Add maximum NSA size limit as an ISA feature.
Use this to reduce NSA usage on GFX10.1 to avoid stability issues
with 4 and 5 dwords NSA instructions.
Maintain use of longer NSA instructions on GFX10.3.
Note: this also contains some minor fixes for GlobalISel which
did not work correctly with non-NSA form instructions on GFX10.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D103348
These tests show missed opportunities in the SelectionDAG layer when
dealing with scalable-vector splats. All of these are handled for the
equivalent `ISD::BUILD_VECTOR` code, and the tests have largely been
translated from the equivalent X86 tests.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D106574
Reland of 31859f896.
This change implements new DAG notes GLOBAL_GET/GLOBAL_SET, and
lowering methods for load and stores of reference types from IR
globals. Once the lowering creates the new nodes, tablegen pattern
matches those and converts them to Wasm global.get/set.
Reviewed By: tlively
Differential Revision: https://reviews.llvm.org/D104797
This patch is in a series of patches to provide builtins for compatibility
with the XL compiler. This patch adds the builtin and intrinsic for "__stbcx".
Reviewed By: nemanjai, #powerpc
Differential revision: https://reviews.llvm.org/D106484
Lowering certain float vectors without legal vector types could cause a
crash due to a bad interaction between passing floats via GPRs and
argument splitting. Split vector floats appear just like scalar floats.
Under certain situations we choose to pass these float arguments via
GPRs and use an XLenVT location and set the 'BCvt' info to track how
they must be converted back to floating-point values. However, later
logic for handling split arguments may take over, in which case we lose
the previous information and set the 'Indirect' info, thus incorrectly
lowering to integer types.
I don't believe that we would have come across the notion of split
floating-point arguments before. This patch addresses the issue by
updating the lowering so that split arguments are only passed indirectly
when they are scalar integer types.
This has some change to how we lower some larger illegal float vectors,
as can be seen in 'fastcc-float.ll' where the vector is now passed
partly in registers and partly on the stack.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D102852
This relands a6ca88e908b5befcd9b0f8c8cb40f53095cc17bc which was originally
reverted due to overflow bugs in e3fa2b1eab60342dc882b7b888658b03c472fa2b.
This patch teaches the compiler to identify a wider variety of
`BUILD_VECTOR`s which form integer arithmetic sequences, and to lower
them to `vid.v` with modifications for non-unit steps and non-zero
addends.
The sequences handled by this optimization must either be monotonically
increasing or decreasing. Consecutive elements holding the same value
indicate a fractional step which, while simple mathematically,
becomes more complex to handle both in the realm of lossy integer
division and in the presence of `undef`s.
For example, a common "interleaving" shuffle index will be lowered by
LLVM to both `<0,u,1,u,2,...>` and `<u,0,u,1,u,...>` `BUILD_VECTOR`
nodes. Either of these would ideally be lowered to `vid.v` shifted right
by 1. Detection of this sequence in presence of general `undef` values
is more complicated, however: `<0,u,u,1,>` could match either
`<0,0,0,1,>` or `<0,0,1,1,>` depending on later values in the sequence.
Both are possible, so backtracking or multiple passes is inevitable.
Sticking to monotonic sequences keeps the logic simpler as it can be
done in one pass. Fractional steps will likely be a separate
optimization in a future patch.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D104921
Prior to this patch, it skipped the instruction defining VNI when checking if the tainted lanes are used.
In the given example, VRGATHER is an illegal instruction because its DstReg overlaps with SrcReg.
Therefore we need to check the defining instruction as well when there is an earlyclobber constraint.
Reviewed By: qcolombet
Differential Revision: https://reviews.llvm.org/D105684
Allow MIMG instructions to be selected with 6/7 VGPRs for vaddr.
Previously these were rounded up to VReg_256 this saves VGPRs.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D103800
