The enc/dec of promoted AMX-TILE instructions have been supported in
https://github.com/llvm/llvm-project/pull/76210.
This patch support lowering for promoted AMX-TILE instructions and
integrate test to existing tests.
KMOV is essential for copy between k-registers and GPRs.
R16-R31 was added into GPRs in #70958, so we extend KMOV for these new
registers first.
This patch
1. Promotes KMOV instructions from VEX space to EVEX space
2. Emits prefix {evex} for the EVEX variants
3. Prefers EVEX variant than VEX variant in ISEL and optimizations for
better RA
EVEX variants will be compressed to VEX variants by existing EVEX2VEX
pass if no EGPR is used.
RFC:
https://discourse.llvm.org/t/rfc-design-for-apx-feature-egpr-and-ndd-support/73031/4
TAG: llvm-test-suite && CPU2017 can be built with feature egpr
successfully.
Computing EH-related information was only relevant for analysis passes so far. Lifting it to IR will allow the IR Verifier to calculate EH funclet coloring and validate funclet operand bundles in a follow-up step.
Reviewed By: rnk, compnerd
Differential Revision: https://reviews.llvm.org/D138122
We support AMX-FP16 isa in https://reviews.llvm.org/D135941 now.
The old intrinsic interface need to manually write tile registers.
So we support its new intrinsic interface to let it be able to do register allocation.
Reviewed By: LuoYuanke
Differential Revision: https://reviews.llvm.org/D138987
The KCFI sanitizer, enabled with `-fsanitize=kcfi`, implements a
forward-edge control flow integrity scheme for indirect calls. It
uses a !kcfi_type metadata node to attach a type identifier for each
function and injects verification code before indirect calls.
Unlike the current CFI schemes implemented in LLVM, KCFI does not
require LTO, does not alter function references to point to a jump
table, and never breaks function address equality. KCFI is intended
to be used in low-level code, such as operating system kernels,
where the existing schemes can cause undue complications because
of the aforementioned properties. However, unlike the existing
schemes, KCFI is limited to validating only function pointers and is
not compatible with executable-only memory.
KCFI does not provide runtime support, but always traps when a
type mismatch is encountered. Users of the scheme are expected
to handle the trap. With `-fsanitize=kcfi`, Clang emits a `kcfi`
operand bundle to indirect calls, and LLVM lowers this to a
known architecture-specific sequence of instructions for each
callsite to make runtime patching easier for users who require this
functionality.
A KCFI type identifier is a 32-bit constant produced by taking the
lower half of xxHash64 from a C++ mangled typename. If a program
contains indirect calls to assembly functions, they must be
manually annotated with the expected type identifiers to prevent
errors. To make this easier, Clang generates a weak SHN_ABS
`__kcfi_typeid_<function>` symbol for each address-taken function
declaration, which can be used to annotate functions in assembly
as long as at least one C translation unit linked into the program
takes the function address. For example on AArch64, we might have
the following code:
```
.c:
int f(void);
int (*p)(void) = f;
p();
.s:
.4byte __kcfi_typeid_f
.global f
f:
...
```
Note that X86 uses a different preamble format for compatibility
with Linux kernel tooling. See the comments in
`X86AsmPrinter::emitKCFITypeId` for details.
As users of KCFI may need to locate trap locations for binary
validation and error handling, LLVM can additionally emit the
locations of traps to a `.kcfi_traps` section.
Similarly to other sanitizers, KCFI checking can be disabled for a
function with a `no_sanitize("kcfi")` function attribute.
Relands 67504c95494ff05be2a613129110c9bcf17f6c13 with a fix for
32-bit builds.
Reviewed By: nickdesaulniers, kees, joaomoreira, MaskRay
Differential Revision: https://reviews.llvm.org/D119296
The KCFI sanitizer, enabled with `-fsanitize=kcfi`, implements a
forward-edge control flow integrity scheme for indirect calls. It
uses a !kcfi_type metadata node to attach a type identifier for each
function and injects verification code before indirect calls.
Unlike the current CFI schemes implemented in LLVM, KCFI does not
require LTO, does not alter function references to point to a jump
table, and never breaks function address equality. KCFI is intended
to be used in low-level code, such as operating system kernels,
where the existing schemes can cause undue complications because
of the aforementioned properties. However, unlike the existing
schemes, KCFI is limited to validating only function pointers and is
not compatible with executable-only memory.
KCFI does not provide runtime support, but always traps when a
type mismatch is encountered. Users of the scheme are expected
to handle the trap. With `-fsanitize=kcfi`, Clang emits a `kcfi`
operand bundle to indirect calls, and LLVM lowers this to a
known architecture-specific sequence of instructions for each
callsite to make runtime patching easier for users who require this
functionality.
A KCFI type identifier is a 32-bit constant produced by taking the
lower half of xxHash64 from a C++ mangled typename. If a program
contains indirect calls to assembly functions, they must be
manually annotated with the expected type identifiers to prevent
errors. To make this easier, Clang generates a weak SHN_ABS
`__kcfi_typeid_<function>` symbol for each address-taken function
declaration, which can be used to annotate functions in assembly
as long as at least one C translation unit linked into the program
takes the function address. For example on AArch64, we might have
the following code:
```
.c:
int f(void);
int (*p)(void) = f;
p();
.s:
.4byte __kcfi_typeid_f
.global f
f:
...
```
Note that X86 uses a different preamble format for compatibility
with Linux kernel tooling. See the comments in
`X86AsmPrinter::emitKCFITypeId` for details.
As users of KCFI may need to locate trap locations for binary
validation and error handling, LLVM can additionally emit the
locations of traps to a `.kcfi_traps` section.
Similarly to other sanitizers, KCFI checking can be disabled for a
function with a `no_sanitize("kcfi")` function attribute.
Reviewed By: nickdesaulniers, kees, joaomoreira, MaskRay
Differential Revision: https://reviews.llvm.org/D119296
This reverts commit 7f230feeeac8a67b335f52bd2e900a05c6098f20.
Breaks CodeGenCUDA/link-device-bitcode.cu in check-clang,
and many LLVM tests, see comments on https://reviews.llvm.org/D121169
This patch updates expandCALL_RVMARKER to wrap the call, marker and
objc runtime call in an instruction bundle. This ensures later passes,
like machine block placement, cannot break them up.
On AArch64, the instruction sequence is already wrapped in a bundle.
Keeping the whole instruction sequence together is highly desirable for
performance and outweighs potential other benefits from breaking the
sequence up.
Reviewed By: ahatanak
Differential Revision: https://reviews.llvm.org/D115230
Be more consistent in the naming convention for the various RET instructions to specify in terms of bitwidth.
Helps prevent future scheduler model mismatches like those that were only addressed in D44687.
Differential Revision: https://reviews.llvm.org/D113302
The changes in D80163 defered the assignment of MachineMemOperand (MMO)
until the X86ExpandPseudo pass. This will result in crash due to prolog
insert point been sunk across the pseudo instruction VASTART_SAVE_XMM_REGS.
Moving the assignment to the creation of the node can avoid the problem.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D112859
integer 0/1 for the operand of bundle "clang.arc.attachedcall"
https://reviews.llvm.org/D102996 changes the operand of bundle
"clang.arc.attachedcall". This patch makes changes to llvm that are
needed to handle the new IR.
This should make it easier to understand what the IR is doing and also
simplify some of the passes as they no longer have to translate the
integer values to the runtime functions.
Differential Revision: https://reviews.llvm.org/D103000
This patch adds support for lowering function calls with the
`clang.arc.attachedcall` bundle. The goal is to expand such calls to the
following sequence of instructions:
callq @fn
movq %rax, %rdi
callq _objc_retainAutoreleasedReturnValue / _objc_unsafeClaimAutoreleasedReturnValue
This sequence of instructions triggers Objective-C runtime optimizations,
hence we want to ensure no instructions get moved in between them.
This patch achieves that by adding a new CALL_RVMARKER ISD node,
which gets turned into the CALL64_RVMARKER pseudo, which eventually gets
expanded into the sequence mentioned above.
The ObjC runtime function to call is determined by the
argument in the bundle, which is passed through as a
target constant to the pseudo.
@ahatanak is working on using this attribute in the front- & middle-end.
Together with the front- & middle-end changes, this should address
PR31925 for X86.
This is the X86 version of 46bc40e50246c1902a1ca7916c8286cb837643ee,
which added similar support for AArch64.
Reviewed By: ab
Differential Revision: https://reviews.llvm.org/D94597
Add __uintr_frame structure and use UIRET instruction for functions with
x86 interrupt calling convention when UINTR is present.
Reviewed By: LuoYuanke
Differential Revision: https://reviews.llvm.org/D99708
That review is extracted from D69372.
It fixes https://bugs.llvm.org/show_bug.cgi?id=42219 bug.
For the noimplicitfloat mode, the compiler mustn't generate
floating-point code if it was not asked directly to do so.
This rule does not work with variable function arguments currently.
Though compiler correctly guards block of code, which copies xmm vararg
parameters with a check for %al, it does not protect spills for xmm registers.
Thus, such spills are generated in non-protected areas and could break code,
which does not expect floating-point data. The problem happens in -O0
optimization mode. With this optimization level there is used
FastRegisterAllocator, which spills virtual registers at basic block boundaries.
Register Allocator does not protect spills with additional control-flow modifications.
Thus to resolve that problem, it is suggested to not copy incoming physical
registers into virtual registers. Instead, store incoming physical xmm registers
into the memory from scratch.
Differential Revision: https://reviews.llvm.org/D80163
Adding support for intrinsics of AMX-BF16.
This patch alse fix a bug that AMX-INT8 instructions will be selected with wrong
predicate.
Differential Revision: https://reviews.llvm.org/D97358
This is an optimized approach for D94155.
Previous code build the model that tile config register is the user of
each AMX instruction. There is a problem for the tile config register
spill. When across function, the ldtilecfg instruction may be inserted
on each AMX instruction which use tile config register. This cause all
tile data register clobber.
To fix this issue, we remove the model of tile config register. Instead,
we analyze the AMX instructions between one call to another. We will
insert ldtilecfg after the first call if we find any AMX instructions.
Reviewed By: LuoYuanke
Differential Revision: https://reviews.llvm.org/D95136
Previous code build the model that tile config register is the user of
each AMX instruction. There is a problem for the tile config register
spill. When across function, the ldtilecfg instruction may be inserted
on each AMX instruction which use tile config register. This cause all
tile data register clobber.
To fix this issue, we remove the model of tile config register. We
analyze the regmask of call instruction and insert ldtilecfg if there is
any tile data register live across the call. Inserting the sttilecfg
before the call is unneccessary, because the tile config doesn't change
and we can just reload the config.
Besides we also need check tile config register interference. Since we
don't model the config register we should check interference from the
ldtilecfg to each tile data register def.
ldtilecfg
/ \
BB1 BB2
/ \
call BB3
/ \
%1=tileload %2=tilezero
We can start from the instruction of each tile def, and backward to
ldtilecfg. If there is any call instruction, and tile data register is
not preserved, we should insert ldtilecfg after the call instruction.
Differential Revision: https://reviews.llvm.org/D94155
This patch implements amx programming model that discussed in llvm-dev
(http://lists.llvm.org/pipermail/llvm-dev/2020-August/144302.html).
Thank Hal for the good suggestion in the RA. The fast RA is not in the patch yet.
This patch implemeted 7 components.
1. The c interface to end user.
2. The AMX intrinsics in LLVM IR.
3. Transform load/store <256 x i32> to AMX intrinsics or split the
type into two <128 x i32>.
4. The Lowering from AMX intrinsics to AMX pseudo instruction.
5. Insert psuedo ldtilecfg and build the def-use between ldtilecfg to amx
intruction.
6. The register allocation for tile register.
7. Morph AMX pseudo instruction to AMX real instruction.
Change-Id: I935e1080916ffcb72af54c2c83faa8b2e97d5cb0
Differential Revision: https://reviews.llvm.org/D87981
The expansion code creates a copy to RBX before the real LCMPXCHG16B.
It's possible this copy uses a register that is also used by the
real LCMPXCHG16B. If we set the kill flag on the use in the copy,
then we'll fail the machine verifier on the use on the LCMPXCHG16B.
Differential Revision: https://reviews.llvm.org/D89151
We need to use LCMPXCHG16B_SAVE_RBX if RBX/EBX is being used as
the frame pointer. We previously checked for this during type
legalization, but that's too early to know for sure if the base
pointer is needed.
This patch adds a new pseudo instruction to emit from isel that
uses a virtual register for the RBX input. Then we use the custom
inserter hook to emit LCMPXCHG16B if RBX isn't needed as a base
pointer or LCMPXCHG16B_SAVE_RBX if it is.
Fixes PR42064.
Reviewed By: pengfei
Differential Revision: https://reviews.llvm.org/D88808
This and its friend X86ISD::LCMPXCHG8_SAVE_RBX_DAG are used if we need to avoid clobbering the frame pointer in EBX/RBX. EBX/RBX are only used a frame pointer in 64-bit mode. In 64-bit mode we don't use CMPXCHG8B since we have a GR64 cmpxchg available. So we don't need special handling for LCMPXCHG8B.
Split from D88808
Differential Revision: https://reviews.llvm.org/D88853
ebx/rbx only needs to be saved when 64-bit registers are supported
anyway. It should be fine to save/restore the whole rbx register
even in gnux32 where the base is technically just ebx.
This matches what we do for cmpxchg16b where rbx is saved/restored
regardless of gnux32.
pointer.
mwaitx uses EBX as one of its argument.
Using this instruction clobbers RBX as it is defined to hold one of the
input. When the backend uses dynamically allocated stack, RBX is used as
a reserved register for the base pointer.
This patch is adapted from @qcolombet patch for cmpxchg at r263325.
This fixes PR43528.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D73475
It makes more sense to turn these into real instructions
a little earlier in the pipeline.
I've made sure to adjust the memoperand so the spill/reload
comments are printed correctly.
Use the isCandidateForCallSiteEntry().
This should mostly be an NFC, but there are some parts ensuring
the moveCallSiteInfo() and copyCallSiteInfo() operate with call site
entry candidates (both Src and Dest should be the call site entry
candidates).
Differential Revision: https://reviews.llvm.org/D74122
The CATCHPAD node mostly existed to be selected into the EH_RESTORE
instruction, which sets the frame back up when 32-bit Windows exceptions
return to the parent function. However, creating this MachineInstr early
increases the risk that other passes will come along and insert
instructions that use the stack before ESP and EBP are restored. That
happened in PR44697.
Instead of representing these in the instruction stream early, delay it
until PEI. Mark the blocks where this needs to happen as EHPads, but not
funclet entry blocks. Passes after PEI have to be careful not to hoist
instructions that can use stack across frame setup instructions, so this
should be relatively reliable.
Fixes PR44697
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D73752
