Forming a `ReadAdvance` with an entry in the `ValidWrites` list that is
not used by any instruction results in the entire `ReadAdvance` to be
ignored by the scheduler due to an invalid entry.
The `SchedRW` collection code only picks up `SchedWrites` that are
reachable from `Instructions`, `InstRW`, `ItinRW` and `SchedAlias`,
leaving the unreachable ones with an invalid entry (0) in
`SubtargetEmitter::GenSchedClassTables` when going through the list of
`ReadAdvances`
Historically TableGen has used `A.swap(B)` to move containers without
the expense of copying them. Perhaps this predated rvalue references. In
any case `A = std::move(B)` seems like a more direct way to implement
this when only A is required after the operation.
`Fusion` is inherited from `SubtargetFeature` now. Each definition
of `Fusion` will define a `SubtargetFeature` accordingly.
Method `getMacroFusions` is added to `TargetSubtargetInfo`, which
returns a list of `MacroFusionPredTy` that will be evaluated by
MacroFusionMution.
`getMacroFusions` will be auto-generated if the target has `Fusion`
definitions.
Use of llvm::Optional was migrated to std::optional. This included a
change in the constructor of ArrayRef.
However, there are still 2 places in the SubtargetEmitter which uses
llvm::None, causing a compile error when emitted.
D150312 added a TODO:
TODO: consider renaming the field `StartAtCycle` and `Cycles` to
`AcquireAtCycle` and `ReleaseAtCycle` respectively, to stress the
fact that resource allocation is now represented as an interval,
relatively to the issue cycle of the instruction.
This patch implements that TODO. This naming clarifies how to use these
fields in the scheduler. In addition it was confusing that `StartAtCycle` was
singular but `Cycles` was plural. This renaming fixes this inconsistency.
This commit as previously reverted since it missed renaming that came
down after rebasing. This version of the commit fixes those problems.
Differential Revision: https://reviews.llvm.org/D158568
D150312 added a TODO:
TODO: consider renaming the field `StartAtCycle` and `Cycles` to
`AcquireAtCycle` and `ReleaseAtCycle` respectively, to stress the
fact that resource allocation is now represented as an interval,
relatively to the issue cycle of the instruction.
This patch implements that TODO. This naming clarifies how to use these
fields in the scheduler. In addition it was confusing that `StartAtCycle` was
singular but `Cycles` was plural. This renaming fixes this inconsistency.
This commit as previously reverted since it missed renaming that came
down after rebasing. This version of the commit fixes those problems.
Differential Revision: https://reviews.llvm.org/D158568
D150312 added a TODO:
TODO: consider renaming the field `StartAtCycle` and `Cycles` to
`AcquireAtCycle` and `ReleaseAtCycle` respectively, to stress the
fact that resource allocation is now represented as an interval,
relatively to the issue cycle of the instruction.
This patch implements that TODO. This naming clarifies how to use these
fields in the scheduler. In addition it was confusing that `StartAtCycle` was
singular but `Cycles` was plural. This renaming fixes this inconsistency.
Differential Revision: https://reviews.llvm.org/D158568
The sort of the elements in the GET_SUBTARGETINFO_MACRO block is done on
the "Name" field of each record. This field is not guaranteed to be unique,
is not guaranteed to even have a value at all, and is not used in the
output anyway. Change to sort on the "FieldName" field which should be
unique.
Problem spotted when lib/Target/PowerPC/PPCGenSubtargetInfo.inc changed
unexpectedly.
Differential Revision: https://reviews.llvm.org/D153371
SubtargetFeature.h is currently part of MC while it doesn't depend on
anything in MC. Since some LLVM components might have the need to work
with target features without necessarily needing MC, it might be
worthwhile to move SubtargetFeature.h to a different location. This will
reduce the dependencies of said components.
Note that I choose TargetParser as the destination because that's where
Triple lives and SubtargetFeatures feels related to that.
This issues came up during a JITLink review (D149522). JITLink would
like to avoid a dependency on MC while still needing to store target
features.
Reviewed By: MaskRay, arsenm
Differential Revision: https://reviews.llvm.org/D150549
The word "attribute" has a specific meaning in LLVM. Avoid using it
here to mean something different.
This addresses feedback from D153180.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D153444
Re-landing the code that was reverted because of the buildbot failure
in https://lab.llvm.org/buildbot#builders/9/builds/27319.
Original commit message
======================
The class `ResourceSegments` is used to keep track of the intervals
that represent resource usage of a list of instructions that are
being scheduled by the machine scheduler.
The collection is made of intervals that are closed on the left and
open on the right (represented by the standard notation `[a, b)`).
These collections of intervals can be extended by `add`ing new
intervals accordingly while scheduling a basic block.
Unit tests are added to verify the possible configurations of
intervals, and the relative possibility of scheduling a new
instruction in these configurations. Specifically, the methods
`getFirstAvailableAtFromBottom` and `getFirstAvailableAtFromTop` are
tested to make sure that both bottom-up and top-down scheduling work
when tracking resource usage across the basic block with
`ResourceSegments`.
Note that the scheduler tracks resource usage with two methods:
1. counters (via `std::vector<unsigned> ReservedCycles;`);
2. intervals (via `std::map<unsigned, ResourceSegments> ReservedResourceSegments;`).
This patch can be considered a NFC test for existing scheduling models
because the tracking system that uses intervals is turned off by
default (field `bit EnableIntervals = false;` in the tablegen class
`SchedMachineModel`).
Reviewed By: andreadb
Differential Revision: https://reviews.llvm.org/D150312
Reverted because it produces the following builbot failure at https://lab.llvm.org/buildbot#builders/9/builds/27319:
/b/ml-opt-rel-x86-64-b1/llvm-project/llvm/unittests/CodeGen/SchedBoundary.cpp: In member function ‘virtual void ResourceSegments_getFirstAvailableAtFromBottom_empty_Test::TestBody()’:
/b/ml-opt-rel-x86-64-b1/llvm-project/llvm/unittests/CodeGen/SchedBoundary.cpp:395:31: error: call of overloaded ‘ResourceSegments(<brace-enclosed initializer list>)’ is ambiguous
395 | auto X = ResourceSegments({});
| ^
This reverts commit dc312f0331309692e8d6e06e93b3492b6a40989f.
The class `ResourceSegments` is used to keep track of the intervals
that represent resource usage of a list of instructions that are
being scheduled by the machine scheduler.
The collection is made of intervals that are closed on the left and
open on the right (represented by the standard notation `[a, b)`).
These collections of intervals can be extended by `add`ing new
intervals accordingly while scheduling a basic block.
Unit tests are added to verify the possible configurations of
intervals, and the relative possibility of scheduling a new
instruction in these configurations. Specifically, the methods
`getFirstAvailableAtFromBottom` and `getFirstAvailableAtFromTop` are
tested to make sure that both bottom-up and top-down scheduling work
when tracking resource usage across the basic block with
`ResourceSegments`.
Note that the scheduler tracks resource usage with two methods:
1. counters (via `std::vector<unsigned> ReservedCycles;`);
2. intervals (via `std::map<unsigned, ResourceSegments> ReservedResourceSegments;`).
This patch can be considered a NFC test for existing scheduling models
because the tracking system that uses intervals is turned off by
default (field `bit EnableIntervals = false;` in the tablegen class
`SchedMachineModel`).
Reviewed By: andreadb
Differential Revision: https://reviews.llvm.org/D150312
Conditions that need to be met:
1. count(StartAtCycle) == count(ReservedCycles);
2. For each i: StartAtCycles[i] < ReservedCycles[i];
3. For each i: StartAtCycles[i] >= 0;
4. If left unspecified, the elements are set to 0.
Differential Revision: https://reviews.llvm.org/D150310
Use deduction guides instead of helper functions.
The only non-automatic changes have been:
1. ArrayRef(some_uint8_pointer, 0) needs to be changed into ArrayRef(some_uint8_pointer, (size_t)0) to avoid an ambiguous call with ArrayRef((uint8_t*), (uint8_t*))
2. CVSymbol sym(makeArrayRef(symStorage)); needed to be rewritten as CVSymbol sym{ArrayRef(symStorage)}; otherwise the compiler is confused and thinks we have a (bad) function prototype. There was a few similar situation across the codebase.
3. ADL doesn't seem to work the same for deduction-guides and functions, so at some point the llvm namespace must be explicitly stated.
4. The "reference mode" of makeArrayRef(ArrayRef<T> &) that acts as no-op is not supported (a constructor cannot achieve that).
Per reviewers' comment, some useless makeArrayRef have been removed in the process.
This is a follow-up to https://reviews.llvm.org/D140896 that introduced
the deduction guides.
Differential Revision: https://reviews.llvm.org/D140955
Reland of D120906 after sanitizer failures.
This patch aims to reduce a lot of the boilerplate around adding new subtarget
features. From the SubtargetFeatures tablegen definitions, a series of calls to
the macro GET_SUBTARGETINFO_MACRO are generated in
ARM/AArch64GenSubtargetInfo.inc. ARMSubtarget/AArch64Subtarget can then use
this macro to define bool members and the corresponding getter methods.
Some naming inconsistencies have been fixed to allow this, and one unused
member removed.
This implementation only applies to boolean members; in future both BitVector
and enum members could also be generated.
Differential Revision: https://reviews.llvm.org/D120906
This patch aims to reduce a lot of the boilerplate around adding new subtarget
features. From the SubtargetFeatures tablegen definitions, a series of calls to
the macro GET_SUBTARGETINFO_MACRO are generated in
ARM/AArch64GenSubtargetInfo.inc. ARMSubtarget/AArch64Subtarget can then use
this macro to define bool members and the corresponding getter methods.
Some naming inconsistencies have been fixed to allow this, and one unused
member removed.
This implementation only applies to boolean members; in future both BitVector
and enum members could also be generated.
Differential Revision: https://reviews.llvm.org/D120906
Since 65b13610a5226b84889b923bae884ba395ad084d, raw_string_ostream has
been unbuffered by default. Based on an audit of llvm/utils/, this
commit removes every call to `raw_string_ostream::flush()` and any call
to `raw_string_ostream::str()` whose result is ignored or that doesn't
help with clarity.
I left behind a few calls to `str()`. In these cases, the underlying
std::string was declared pretty far away and never used again, whereas
stream recently had its last write. The code is easier to read as-is;
the no-op call to `flush()` inside `str()` isn't harmful, and when
https://reviews.llvm.org/D115421 lands it'll be gone anyway.
This patch adds a pipeline to support in-order CPUs such as ARM
Cortex-A55.
In-order pipeline implements a simplified version of Dispatch,
Scheduler and Execute stages as a single stage. Entry and Retire
stages are common for both in-order and out-of-order pipelines.
Differential Revision: https://reviews.llvm.org/D94928
Patch fixes scheduling of ALU instructions which modify pc register. Patch
also fixes computation of mutually exclusive predicates for sequences of
variants to be properly expanded
Differential revision: https://reviews.llvm.org/D91266
Some of these were found by running clang-format over the generated
code, although that complains about far more issues than I have fixed
here.
Differential Revision: https://reviews.llvm.org/D90937
This patch implements initial backend support for a -mtune CPU controlled by a "tune-cpu" function attribute. If the attribute is not present X86 will use the resolved CPU from target-cpu attribute or command line.
This patch adds MC layer support a tune CPU. Each CPU now has two sets of features stored in their GenSubtargetInfo.inc tables . These features lists are passed separately to the Processor and ProcessorModel classes in tablegen. The tune list defaults to an empty list to avoid changes to non-X86. This annoyingly increases the size of static tables on all target as we now store 24 more bytes per CPU. I haven't quantified the overall impact, but I can if we're concerned.
One new test is added to X86 to show a few tuning features with mismatched tune-cpu and target-cpu/target-feature attributes to demonstrate independent control. Another new test is added to demonstrate that the scheduler model follows the tune CPU.
I have not added a -mtune to llc/opt or MC layer command line yet. With no attributes we'll just use the -mcpu for both. MC layer tools will always follow the normal CPU for tuning.
Differential Revision: https://reviews.llvm.org/D85165
Summary:
The type used to represent functional units in MC is
'unsigned', which is 32 bits wide. This is currently
not a problem in any upstream target as no one seems
to have hit the limit on this yet, but in our
downstream one, we need to define more than 32
functional units.
Increasing the size does not seem to cause a huge
size increase in the binary (an llc debug build went
from 1366497672 to 1366523984, a difference of 26k),
so perhaps it would be acceptable to have this patch
applied upstream as well.
Subscribers: hiraditya, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71210
This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.
This is mostly mechanical from a custom clang-tidy check, with a lot of
manual fixups. It uncovers a lot of minor inefficiencies.
This doesn't actually modify StringRef yet, I'll do that in a follow-up.
Assume that, ModelA has scheduling resource for InstA and ModelB has scheduling resource for InstB. This is what the llvm::MCSchedClassDesc looks like:
llvm::MCSchedClassDesc ModelASchedClasses[] = {
...
InstA, 0, ...
InstB, -1,...
};
llvm::MCSchedClassDesc ModelBSchedClasses[] = {
...
InstA, -1,...
InstB, 0,...
};
The -1 means invalid num of macro ops, while it is valid if it is >=0. This is what we look like now:
llvm::MCSchedClassDesc ModelASchedClasses[] = {
...
InstA, 0, ...
InstB, 0,...
};
llvm::MCSchedClassDesc ModelBSchedClasses[] = {
...
InstA, 0,...
InstB, 0,...
};
And compiler hit the assertion here because the SCDesc is valid now for both InstA and InstB.
Differential Revision: https://reviews.llvm.org/D67950
llvm-svn: 374524
Much like ValueTypeByHwMode/RegInfoByHwMode, this patch allows targets
to modify an instruction's encoding based on HwMode. When the
EncodingInfos field is non-empty the Inst and Size fields of the Instruction
are ignored and taken from EncodingInfos instead.
As part of this promote getHwMode() from TargetSubtargetInfo to MCSubtargetInfo.
This is NFC for all existing targets - new code is generated only if targets
use EncodingByHwMode.
llvm-svn: 372320
