This reverts commit adaff46d087799072438dd744b038e6fd50a2d78.
Drop the -O3 checks from default-attributes.hip. I don't know why they
are different on some bots but reverting this is far too disruptive.
Removing it from the codegen pipeline induces a lot of test churn
because llc is no longer optimizing out implicit arguments to kernels.
Mostly mechanical, but there are some creative test updates. I preferred
to take the changes as-is in tests where the ABI isn't relevant. In
cases where it's more relevant, or the optimize out logic was too
ingrained in the test, I pre-run the optimization. Some cases manually
add attributes to disable inputs.
Similar to 806761a7629df268c8aed49657aeccffa6bca449.
For IR files without a target triple, -mtriple= specifies the full
target triple while -march= merely sets the architecture part of the
default target triple, leaving a target triple which may not make sense,
e.g. amdgpu-apple-darwin.
Therefore, -march= is error-prone and not recommended for tests without
a target triple. The issue has been benign as we recognize
$unknown-apple-darwin as ELF instead of rejecting it outrightly.
This patch changes AMDGPU tests to not rely on the default
OS/environment components. Tests that need fixes are not changed:
```
LLVM :: CodeGen/AMDGPU/fabs.f64.ll
LLVM :: CodeGen/AMDGPU/fabs.ll
LLVM :: CodeGen/AMDGPU/floor.ll
LLVM :: CodeGen/AMDGPU/fneg-fabs.f64.ll
LLVM :: CodeGen/AMDGPU/fneg-fabs.ll
LLVM :: CodeGen/AMDGPU/r600-infinite-loop-bug-while-reorganizing-vector.ll
LLVM :: CodeGen/AMDGPU/schedule-if-2.ll
```
or (xor x, y), x --> or x, y
or (xor x, y), y --> or x, y
or (xor x, y), (and x, y) --> or x, y
or (xor x, y), (or x, y) --> or x, y
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D138401
Add GFX11 test coverage to a bunch of tests where it was easy to do so,
mostly because the checks are autogenerated and/or GFX11 can share the
same checks as GFX10.
Differential Revision: https://reviews.llvm.org/D129295
Use shufflevector to do the subvector extracts. This allows a lot more
load merging on AMDGPU and also on NVPTX when <2 x half> is involved.
Differential Revision: https://reviews.llvm.org/D117219
Using a BufferSize of one for memory ProcResources will result in better
ILP since it more accurately models the dependencies between memory ops
and their consumers on an in-order processor. After this change, the
scheduler will treat the data edges from loads as blocking so that
stalls are guaranteed when waiting for data to be retreaved from memory.
Since we don't actually track waitcnt here, this should do a better job
at modeling their behavior.
Practically, this means that the scheduler will trigger the 'STALL'
heuristic more often.
This type of change needs to be evaluated experimentally. Preliminary
results are positive.
Fixes: SWDEV-282962
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D114777
Use GCNHazardRecognizer in postra sched.
Updated tests for the new schedules.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D109536
Change-Id: Ia86ba2ae168f12fb34b4d8efdab491f84d936cde
Support for XNACK and SRAMECC is not static on some GPUs. We must be able
to differentiate between different scenarios for these dynamic subtarget
features.
The possible settings are:
- Unsupported: The GPU has no support for XNACK/SRAMECC.
- Any: Preference is unspecified. Use conservative settings that can run anywhere.
- Off: Request support for XNACK/SRAMECC Off
- On: Request support for XNACK/SRAMECC On
GCNSubtarget will track the four options based on the following criteria. If
the subtarget does not support XNACK/SRAMECC we say the setting is
"Unsupported". If no subtarget features for XNACK/SRAMECC are requested we
must support "Any" mode. If the subtarget features XNACK/SRAMECC exist in the
feature string when initializing the subtarget, the settings are "On/Off".
The defaults are updated to be conservatively correct, meaning if no setting
for XNACK or SRAMECC is explicitly requested, defaults will be used which
generate code that can be run anywhere. This corresponds to the "Any" setting.
Differential Revision: https://reviews.llvm.org/D85882
It should be enabled only when the load alignment is at least 8-byte.
Fixes: SWDEV-256824
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D90404
D77152 tried to do this but got it wrong in the shift-by-zero case.
D86430 reverted the wrong code. Reimplement the optimization with
different code depending on whether the shift amount is known to be
non-zero (modulo bitwidth).
This improves code quality for fshl tests on AMDGPU, which only has an
fshr instruction.
Differential Revision: https://reviews.llvm.org/D86438
This is a fixup of commit 0819a6416fd217 (D77152) which could
result in miscompiles. The miscompile could only happen for targets
where isOperationLegalOrCustom could return different values for
FSHL and FSHR.
The commit mentioned above added logic in expandFunnelShift to
convert between FSHL and FSHR by swapping direction of the
funnel shift. However, that transform is only legal if we know
that the shift count (modulo bitwidth) isn't zero.
Basically, since fshr(-1,0,0)==0 and fshl(-1,0,0)==-1 then doing a
rewrite such as fshr(X,Y,Z) => fshl(X,Y,0-Z) would be incorrect if
Z modulo bitwidth, could be zero.
```
$ ./alive-tv /tmp/test.ll
----------------------------------------
define i32 @src(i32 %x, i32 %y, i32 %z) {
%0:
%t0 = fshl i32 %x, i32 %y, i32 %z
ret i32 %t0
}
=>
define i32 @tgt(i32 %x, i32 %y, i32 %z) {
%0:
%t0 = sub i32 32, %z
%t1 = fshr i32 %x, i32 %y, i32 %t0
ret i32 %t1
}
Transformation doesn't verify!
ERROR: Value mismatch
Example:
i32 %x = #x00000000 (0)
i32 %y = #x00000400 (1024)
i32 %z = #x00000000 (0)
Source:
i32 %t0 = #x00000000 (0)
Target:
i32 %t0 = #x00000020 (32)
i32 %t1 = #x00000400 (1024)
Source value: #x00000000 (0)
Target value: #x00000400 (1024)
```
It could be possible to add back the transform, given that logic
is added to check that (Z % BW) can't be zero. Since there were
no test cases proving that such a transform actually would be useful
I decided to simply remove the faulty code in this patch.
Reviewed By: foad, lebedev.ri
Differential Revision: https://reviews.llvm.org/D86430
In SelectionDAGBuilder always translate the fshl and fshr intrinsics to
FSHL and FSHR (or ROTL and ROTR) instead of lowering them to shifts and
ORs. Improve the legalization of FSHL and FSHR to avoid code quality
regressions.
Differential Revision: https://reviews.llvm.org/D77152
Fix 64-bit copy to SCC by restricting the pattern resulting
in such a copy to subtargets supporting 64-bit scalar compare,
and mapping the copy to S_CMP_LG_U64.
Before introducing the S_CSELECT pattern with explicit SCC
(0045786f146e78afee49eee053dc29ebc842fee1), there was no need
for handling 64-bit copy to SCC ($scc = COPY sreg_64).
The proposed handling to read only the low bits was however
based on a false premise that it is only one bit that matters,
while in fact the copy source might be a vector of booleans and
all bits need to be considered.
The practical problem of mapping the 64-bit copy to SCC is that
the natural instruction to use (S_CMP_LG_U64) is not available
on old hardware. Fix it by restricting the problematic pattern
to subtargets supporting the instruction (hasScalarCompareEq64).
Differential Revision: https://reviews.llvm.org/D85207
Summary:
Add patterns to select s_cselect in the isel.
Handle more cases of implicit SCC accesses in si-fix-sgpr-copies
to allow new patterns to work.
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, hiraditya, asbirlea, kerbowa, llvm-commits
Tags: #llvm
Re-commit D81925 with a bugfix D82370.
Differential Revision: https://reviews.llvm.org/D81925
Differential Revision: https://reviews.llvm.org/D82370
Summary:
Add patterns to select s_cselect in the isel.
Handle more cases of implicit SCC accesses in si-fix-sgpr-copies
to allow new patterns to work.
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, hiraditya, asbirlea, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81925
Followup to D75114, this patch reuses the existing MatchRotate ROTL/ROTR rotation pattern code to also recognize the more general FSHL/FSHR funnel shift patterns when we have variable shift amounts, matched with MatchFunnelPosNeg which acts in an (almost) equivalent manner to MatchRotatePosNeg.
This patch allows ISD::FSHR(i32) patterns to lower to ALIGNBIT instructions.
This improves test coverage of ISD::FSHR matching - x86 has both FSHL/FSHR instructions and we prefer FSHL by default.
Differential Revision: https://reviews.llvm.org/D76070
