Define the `vand`, `vor` and `vxor` IR intrinsics for the respective V instructions.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Evandro Menezes <evandro.menezes@sifive.com>
Differential Revision: https://reviews.llvm.org/D93574
VE used to allocate VM1, VM2, VMP2 (VM4+VM5), and VM3. This patch
corrects to allocate VM1, VM2, VMP2 (VM4+VM5), and VM6. Also add
a regression test.
Reviewed By: simoll
Differential Revision: https://reviews.llvm.org/D93570
Currently we lower invokes the same way as usual calls, e.g.:
V1 = STATEPOINT ... V (tied-def 0)
But this is incorrect is V1 is used on exceptional path.
By LLVM rules V1 neither dominates its uses in landing pad, nor
its live range is live on entry to landing pad. So compiler is
allowed to do various weird transformations like splitting live
range after statepoint and use split LR in catch block.
Until (and if) we find better solution to this problem, let's
use old lowering (spilling) for those values which are used on
exceptional path and allow VReg lowering for values used only
on normal path.
Differential Revision: https://reviews.llvm.org/D93449
Change to optimize references of elements of aggregate data. Also
add regression tests.
Reviewed By: simoll
Differential Revision: https://reviews.llvm.org/D93627
Errors from MCAssembler, MCObjectStreamer and *ObjectWriter typically cause a crash:
```
% cat c.c
int bar;
extern int foo __attribute__((alias("bar")));
% clang -c -fcommon c.c
fatal error: error in backend: Common symbol 'bar' cannot be used in assignment expr
PLEASE submit a bug report to ...
Stack dump:
...
```
`LLVMTargetMachine::addPassesToEmitFile` constructs `MachineModuleInfoWrapperPass`
which creates a MCContext without SourceMgr. `MCContext::reportError` calls
`report_fatal_error` which gets captured by Clang `LLVMErrorHandler` and gets translated
to the output above.
Since `MCContext::reportError` errors indicate user errors, such a crashing style error
is inappropriate. So this patch changes `report_fatal_error` to `SourceMgr().PrintMessage`.
```
% clang -c -fcommon c.c
<unknown>:0: error: Common symbol 'bar' cannot be used in assignment expr
```
Ideally we should at least recover the original filename (the line information
is generally lost). That requires general improvement to MC diagnostics,
because currently in many cases SMLoc information is lost.
Fast register allocator skips bundled MIs, as the main assignment
loop uses MachineBasicBlock::iterator (= MachineInstrBundleIterator)
This was causing SIInsertWaitcnts to crash which expects all
instructions to have registers assigned.
This patch makes sure to set everything inside bundle to the same
assignments done on BUNDLE header.
Reviewed By: qcolombet
Differential Revision: https://reviews.llvm.org/D90369
This patch base on D93366, and define vector fixed-point intrinsics.
1. vaaddu/vaadd/vasubu/vasub
2. vsmul
3. vssrl/vssra
4. vnclipu/vnclip
We work with @rogfer01 from BSC to come out this patch.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: ShihPo Hung <shihpo.hung@sifive.com>
Differential Revision: https://reviews.llvm.org/D93508
Summary: Some constants can be handled with less instructions than our current results. And it seems our original approach is not very easy to extend. Therefore this patch proposes to materialize all 64-bit constants by enumerated patterns.
I traversed almost all constants to verified the functionality of these pattens. A traversed comparison of the number of instructions used by the original method and the new method has also been completed, where no degradation was caused by this patch. This patch also passed Bootstrap test and SPEC test.
Improvements of this patch are shown in llvm/test/CodeGen/PowerPC/constants-i64.ll
Reviewed By: steven.zhang, stefanp
Differential Revision: https://reviews.llvm.org/D92089
This patch does two things:
1: fix the typo that intrinsic mfvscr should be with no readmem property
2: since VSCR is not modeled yet, add has side effect for SAT bit clobber
intrinsics/instructions.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D90807
Define vector vfwmul intrinsics and lower them to V instructions.
We work with @rogfer01 from BSC to come out this patch.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Hsiangkai Wang <kai.wang@sifive.com>
Differential Revision: https://reviews.llvm.org/D93584
Define vector vfwadd/vfwsub intrinsics and lower them to V
instructions.
We work with @rogfer01 from BSC to come out this patch.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Hsiangkai Wang <kai.wang@sifive.com>
Differential Revision: https://reviews.llvm.org/D93583
Define vector vfsgnj/vfsgnjn/vfsgnjx intrinsics and lower them to V
instructions.
We work with @rogfer01 from BSC to come out this patch.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Hsiangkai Wang <kai.wang@sifive.com>
Differential Revision: https://reviews.llvm.org/D93581
Define vector vfmul/vfdiv/vfrdiv intrinsics and lower them to V instructions.
We work with @rogfer01 from BSC to come out this patch.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Hsiangkai Wang <kai.wang@sifive.com>
Differential Revision: https://reviews.llvm.org/D93580
Define vlxe/vsxe intrinsics and lower to vlxei<EEW>/vsxei<EEW>
instructions.
We work with @rogfer01 from BSC to come out this patch.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Zakk Chen <zakk.chen@sifive.com>
Differential Revision: https://reviews.llvm.org/D93471
As a linker is allowed to clobber r12 on function calls, the code
transformation that hardens indirect calls is not correct in case a
linker does so. Similarly, the transformation is not correct when
register lr is used.
This patch makes sure that r12 or lr are not used for indirect calls
when harden-sls-blr is enabled.
Differential Revision: https://reviews.llvm.org/D92469
To make sure that no barrier gets placed on the architectural execution
path, each indirect call calling the function in register rN, it gets
transformed to a direct call to __llvm_slsblr_thunk_mode_rN. mode is
either arm or thumb, depending on the mode of where the indirect call
happens.
The llvm_slsblr_thunk_mode_rN thunk contains:
bx rN
<speculation barrier>
Therefore, the indirect call gets split into 2; one direct call and one
indirect jump.
This transformation results in not inserting a speculation barrier on
the architectural execution path.
The mitigation is off by default and can be enabled by the
harden-sls-blr subtarget feature.
As a linker is allowed to clobber r12 on function calls, the
above code transformation is not correct in case a linker does so.
Similarly, the transformation is not correct when register lr is used.
Avoiding r12/lr being used is done in a follow-on patch to make
reviewing this code easier.
Differential Revision: https://reviews.llvm.org/D92468
The only non-trivial consideration in this patch is that the formation
of TBB/TBH instructions, which is done in the constant island pass, does
not understand the speculation barriers inserted by the SLSHardening
pass. As such, when harden-sls-retbr is enabled for a function, the
formation of TBB/TBH instructions in the constant island pass is
disabled.
Differential Revision: https://reviews.llvm.org/D92396
Some processors may speculatively execute the instructions immediately
following indirect control flow, such as returns, indirect jumps and
indirect function calls.
To avoid a potential miss-speculatively executed gadget after these
instructions leaking secrets through side channels, this pass places a
speculation barrier immediately after every indirect control flow where
control flow doesn't return to the next instruction, such as returns and
indirect jumps, but not indirect function calls.
Hardening of indirect function calls will be done in a later,
independent patch.
This patch is implementing the same functionality as the AArch64 counter
part implemented in https://reviews.llvm.org/D81400.
For AArch64, returns and indirect jumps only occur on RET and BR
instructions and hence the function attribute to control the hardening
is called "harden-sls-retbr" there. On AArch32, there is a much wider
variety of instructions that can trigger an indirect unconditional
control flow change. I've decided to stick with the name
"harden-sls-retbr" as introduced for the corresponding AArch64
mitigation.
This patch implements this for ARM mode. A future patch will extend this
to also support Thumb mode.
The inserted barriers are never on the correct, architectural execution
path, and therefore performance overhead of this is expected to be low.
To ensure these barriers are never on an architecturally executed path,
when the harden-sls-retbr function attribute is present, indirect
control flow is never conditionalized/predicated.
On targets that implement that Armv8.0-SB Speculation Barrier extension,
a single SB instruction is emitted that acts as a speculation barrier.
On other targets, a DSB SYS followed by a ISB is emitted to act as a
speculation barrier.
These speculation barriers are implemented as pseudo instructions to
avoid later passes to analyze them and potentially remove them.
The mitigation is off by default and can be enabled by the
harden-sls-retbr subtarget feature.
Differential Revision: https://reviews.llvm.org/D92395
Support VM and VMP registers in copyPhysReg() function. Also add
regression tests.
Reviewed By: simoll
Differential Revision: https://reviews.llvm.org/D93547
To support OpenCL, which typically uses SPIR as an IR, non-zero address
spaces must be accounted for. This patch makes the RISC-V target assume
no-op address space casts across the board, which effectively removes
the need to support addrspacecast instructions in the backend.
For a RISC-V implementation with different configurations or specialized
address spaces where casts aren't no-ops, the function can be adjusted
as required.
Reviewed By: jrtc27
Differential Revision: https://reviews.llvm.org/D93536
This patch adds two IR intrinsics for vsetvli instruction. One to set the vector length to a user specified value and one to set it to vlmax. The vlmax uses the X0 source register encoding.
Clang builtins will follow in a separate patch
Differential Revision: https://reviews.llvm.org/D92973
The default behavior for any_extend of a constant is to zero extend.
This occurs inside of getNode rather than allowing type legalization
to promote the constant which would sign extend. By using sign extend
with getNode the constant will be sign extended. This gives a better
chance for isel to find a simm5 immediate since all xlen bits are
examined there.
For instructions that use a uimm5 immediate, this change only affects
constants >= 128 for i8 or >= 32768 for i16. Constants that large
already wouldn't have been eligible for uimm5 and would need to use a
scalar register.
If the instruction isn't able to use simm5 or the immediate is
too large, we'll need to materialize the immediate in a register.
As far as I know constants with all 1s in the upper bits should
materialize as well or better than all 0s.
Longer term we should probably have a SEW aware PatFrag to ignore
the bits above SEW before checking simm5.
I updated about half the test cases in some tests to use a negative
constant to get coverage for this.
Reviewed By: evandro
Differential Revision: https://reviews.llvm.org/D93487
This time with tests.
Original message:
Similar to D93365, but for floating point. No need for special ISD opcodes
though. We can directly isel these from intrinsics. I had to use anyfloat_ty
instead of anyvector_ty in the intrinsics to make LLVMVectorElementType not
crash when imported into the -gen-dag-isel tablegen backend.
Differential Revision: https://reviews.llvm.org/D93426
This adds intrinsics for vmv.x.s and vmv.s.x.
I've used stricter type constraints on these intrinsics than what we've been doing on the arithmetic intrinsics so far. This will allow us to not need to pass the scalar type to the Intrinsic::getDeclaration call when creating these intrinsics.
A custom ISD is used for vmv.x.s in order to implement the change in computeNumSignBitsForTargetNode which can remove sign extends on the result.
I also modified the MC layer description of these instructions to show the tied source/dest operand. This is different than what we do for masked instructions where we drop the tied source operand when converting to MC. But it is a more accurate description of the instruction. We can't do this for masked instructions since we use the same MC instruction for masked and unmasked. Tools like llvm-mca operate in the MC layer and rely on ins/outs and Uses/Defs for analysis so I don't know if we'll be able to maintain the current behavior for masked instructions. So I went with the accurate description here since it was easy.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D93365
We work with @rogfer01 from BSC to come out this patch.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Craig Topper <craig.topper@sifive.com>
Differential Revision: https://reviews.llvm.org/D93514
This PR implements the function splitBasicBlockBefore to address an
issue
that occurred during SplitEdge(BB, Succ, ...), inside splitBlockBefore.
The issue occurs in SplitEdge when the Succ has a single predecessor
and the edge between the BB and Succ is not critical. This produces
the result ‘BB->Succ->New’. The new function splitBasicBlockBefore
was added to splitBlockBefore to handle the issue and now produces
the correct result ‘BB->New->Succ’.
Below is an example of splitting the block bb1 at its first instruction.
/// Original IR
bb0:
br bb1
bb1:
%0 = mul i32 1, 2
br bb2
bb2:
/// IR after splitEdge(bb0, bb1) using splitBasicBlock
bb0:
br bb1
bb1:
br bb1.split
bb1.split:
%0 = mul i32 1, 2
br bb2
bb2:
/// IR after splitEdge(bb0, bb1) using splitBasicBlockBefore
bb0:
br bb1.split
bb1.split
br bb1
bb1:
%0 = mul i32 1, 2
br bb2
bb2:
Differential Revision: https://reviews.llvm.org/D92200
MVE has a dual lane vector move instruction, capable of moving two
general purpose registers into lanes of a vector register. They look
like one of:
vmov q0[2], q0[0], r2, r0
vmov q0[3], q0[1], r3, r1
They only accept these lane indices though (and only insert into an
i32), either moving lanes 1 and 3, or 0 and 2.
This patch adds some tablegen patterns for them, selecting from vector
inserts elements. Because the insert_elements are know to be
canonicalized to ascending order there are several patterns that we need
to select. These lane indices are:
3 2 1 0 -> vmovqrr 31; vmovqrr 20
3 2 1 -> vmovqrr 31; vmov 2
3 1 -> vmovqrr 31
2 1 0 -> vmovqrr 20; vmov 1
2 0 -> vmovqrr 20
With the top one being the most common. All other potential patterns of
lane indices will be matched by a combination of these and the
individual vmov pattern already present. This does mean that we are
selecting several machine instructions at once due to the need to
re-arrange the inserts, but in this case there is nothing else that will
attempt to match an insert_vector_elt node.
This is a recommit of 6cc3d80a84884a79967fffa4596c14001b8ba8a3 after
fixing the backward instruction definitions.
Followup to D92645 - remove the remaining places where we create X86ISD::SUBV_BROADCAST, and fold splatted vector loads to X86ISD::SUBV_BROADCAST_LOAD instead.
Remove all the X86SubVBroadcast isel patterns, including all the fallbacks for if memory folding failed.
Redundant Copy Elimination was eliminating a MOVi32imm -1 when it
determined that the value of the destination register is already -1.
However, it didn't take into account that the MOVi32imm zeroes the upper
32 bits (which are FFFFFFFF) and therefore cannot be eliminated.
Reviewed By: paulwalker-arm
Differential Revision: https://reviews.llvm.org/D93100
During isel there's no need to protect illegal types. Patch also
adds a missing unit test for tbl2 intrinsic using bfloat types.
Differential Revision: https://reviews.llvm.org/D93404
This patch extends LowerMGATHER/MSCATTER to make use of the vector + reg/immediate
addressing modes for scalable masked gathers & scatters.
selectGatherScatterAddrMode checks if the base pointer is null, in which case
we can swap the base pointer and the index, e.g.
getelementptr nullptr, <vscale x N x T> (splat(%offset)) + %indices)
-> getelementptr %offset, <vscale x N x T> %indices
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D93132
This patch adds support for the fptoui.sat and fptosi.sat intrinsics,
which provide basically the same functionality as the existing fptoui
and fptosi instructions, but will saturate (or return 0 for NaN) on
values unrepresentable in the target type, instead of returning
poison. Related mailing list discussion can be found at:
https://groups.google.com/d/msg/llvm-dev/cgDFaBmCnDQ/CZAIMj4IBAAJ
The intrinsics have overloaded source and result type and support
vector operands:
i32 @llvm.fptoui.sat.i32.f32(float %f)
i100 @llvm.fptoui.sat.i100.f64(double %f)
<4 x i32> @llvm.fptoui.sat.v4i32.v4f16(half %f)
// etc
On the SelectionDAG layer two new ISD opcodes are added,
FP_TO_UINT_SAT and FP_TO_SINT_SAT. These opcodes have two operands
and one result. The second operand is an integer constant specifying
the scalar saturation width. The idea here is that initially the
second operand and the scalar width of the result type are the same,
but they may change during type legalization. For example:
i19 @llvm.fptsi.sat.i19.f32(float %f)
// builds
i19 fp_to_sint_sat f, 19
// type legalizes (through integer result promotion)
i32 fp_to_sint_sat f, 19
I went for this approach, because saturated conversion does not
compose well. There is no good way of "adjusting" a saturating
conversion to i32 into one to i19 short of saturating twice.
Specifying the saturation width separately allows directly saturating
to the correct width.
There are two baseline expansions for the fp_to_xint_sat opcodes. If
the integer bounds can be exactly represented in the float type and
fminnum/fmaxnum are legal, we can expand to something like:
f = fmaxnum f, FP(MIN)
f = fminnum f, FP(MAX)
i = fptoxi f
i = select f uo f, 0, i # unnecessary if unsigned as 0 = MIN
If the bounds cannot be exactly represented, we expand to something
like this instead:
i = fptoxi f
i = select f ult FP(MIN), MIN, i
i = select f ogt FP(MAX), MAX, i
i = select f uo f, 0, i # unnecessary if unsigned as 0 = MIN
It should be noted that this expansion assumes a non-trapping fptoxi.
Initial tests are for AArch64, x86_64 and ARM. This exercises all of
the scalar and vector legalization. ARM is included to test float
softening.
Original patch by @nikic and @ebevhan (based on D54696).
Differential Revision: https://reviews.llvm.org/D54749
The LD/STD likewise instruction are selected only when the alignment in
the load/store >= 4 to deal with the case that the offset might not be
known(i.e. relocations). That means we have to select the X-Form load
for %0 = load i64, i64* %arrayidx, align 2 In fact, we can still select
the D-Form load if the offset is known. So, we only query the load/store
alignment when we don't know if the offset is a multiple of 4.
Reviewed By: jji, Nemanjai
Differential Revision: https://reviews.llvm.org/D93099
Clang FE currently has hot/cold function attribute. But we only have
cold function attribute in LLVM IR.
This patch adds support of hot function attribute to LLVM IR. This
attribute will be used in setting function section prefix/suffix.
Currently .hot and .unlikely suffix only are added in PGO (Sample PGO)
compilation (through isFunctionHotInCallGraph and
isFunctionColdInCallGraph).
This patch changes the behavior. The new behavior is:
(1) If the user annotates a function as hot or isFunctionHotInCallGraph
is true, this function will be marked as hot. Otherwise,
(2) If the user annotates a function as cold or
isFunctionColdInCallGraph is true, this function will be marked as
cold.
The changes are:
(1) user annotated function attribute will used in setting function
section prefix/suffix.
(2) hot attribute overwrites profile count based hotness.
(3) profile count based hotness overwrite user annotated cold attribute.
The intention for these changes is to provide the user a way to mark
certain function as hot in cases where training input is hard to cover
all the hot functions.
Differential Revision: https://reviews.llvm.org/D92493
We work with @rogfer01 from BSC to come out this patch.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: ShihPo Hung <shihpo.hung@sifive.com>
Co-Authored-by: Monk Chiang <monk.chiang@sifive.com>
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D93366
Clean up a TODO, to support folding a shift of a constant by a
select of constants, on targets with different shift operand sizes.
Reviewed By: RKSimon, lebedev.ri
Differential Revision: https://reviews.llvm.org/D90349
Define vlse/vsse intrinsics and lower to V instructions.
We work with @rogfer01 from BSC to come out this patch.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Zakk Chen <zakk.chen@sifive.com>
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D93445
On PPC, the vector pair instructions are independent from MMA.
This patch renames the vector pair LLVM intrinsics and Clang builtins to replace the _mma_ prefix by _vsx_ in their names.
We also move the vector pair type/intrinsic/builtin tests to their own files.
Differential Revision: https://reviews.llvm.org/D91974
This PR implements the function splitBasicBlockBefore to address an
issue
that occurred during SplitEdge(BB, Succ, ...), inside splitBlockBefore.
The issue occurs in SplitEdge when the Succ has a single predecessor
and the edge between the BB and Succ is not critical. This produces
the result ‘BB->Succ->New’. The new function splitBasicBlockBefore
was added to splitBlockBefore to handle the issue and now produces
the correct result ‘BB->New->Succ’.
Below is an example of splitting the block bb1 at its first instruction.
/// Original IR
bb0:
br bb1
bb1:
%0 = mul i32 1, 2
br bb2
bb2:
/// IR after splitEdge(bb0, bb1) using splitBasicBlock
bb0:
br bb1
bb1:
br bb1.split
bb1.split:
%0 = mul i32 1, 2
br bb2
bb2:
/// IR after splitEdge(bb0, bb1) using splitBasicBlockBefore
bb0:
br bb1.split
bb1.split
br bb1
bb1:
%0 = mul i32 1, 2
br bb2
bb2:
Differential Revision: https://reviews.llvm.org/D92200
