Currently, when Wasm EH is used with Emscripten SjLj, Emscripten SjLj
cannot handle `invoke` instructions - it assumes all `invoke`s have been
lowered away with Emscripten EH. But in Wasm EH they are lowered in
instruction selection, so they are still present in the IR stage. This
happens when
1. Wasm EH and Emscripten SjLj are used together
2. A function that calls `setjmp` uses exceptions, i.e., has `invoke`s
We were already erroring out with an assertion failure in this case, but
this CL makes it error out more properly with a valid error message.
Wasm EH + Wasm SjLj will not have this restrictions. (it will have
another restriction though, e.g., `setjmp` cannot be called within
`catch`. But why would anyone do that..)
Reviewed By: dschuff
Differential Revision: https://reviews.llvm.org/D107687
Add builtin and intrinsic for `__addex`.
This patch is part of a series of patches to provide builtins for
compatibility with the XL compiler.
Reviewed By: stefanp, nemanjai, NeHuang
Differential Revision: https://reviews.llvm.org/D107002
-Add Z for the B extension subextensions.
-Don't mention I along with B or its sub extensions.
This is based on comments in D107817.
Differential Revision: https://reviews.llvm.org/D107992
DAGCombiner::visitStore can call GetDemandedBits which will remove
upper bits from immediates. The upper bits are important for good
materialization of negative constants on RISCV. GetDemandedBits is a
different mechanism than SimplifyDemandedBits so
TargetShrinkDemandedConstant can't block it.
As far as I know this behavior is unique to stores.
I think we can fix this in isel using a concept similar to D107658.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D107860
For unit-stride and strided load/stores we set the SEW operand of
the pseudo instruction equal the EEW in the opcode. The LMUL
of the pseudo instruction is the LMUL we want.
These instructions calculate EMUL=(EEW/SEW) * LMUL. We can use
this to avoid changing vtype if the SEW/LMUL of the previous
vtype matches the EEW/EMUL ratio we need for the instruction.
Due to how the global analysis works, we can only do this
optimization when the previous vsetvli was produced in the block
containing the store. We need to know in the first phase if the
vsetvli will be inserted so we can propagate information to
the successors in the second phase correctly. This means we can't
depend on predecessors.
Reviewed By: rogfer01
Differential Revision: https://reviews.llvm.org/D106601
Given a constant operand, the MVE and DAGCombine combines could fight,
each redistributing in the opposite order. Add a guard to the MVE
vecreduce distribution to prevent that.
When depth > 0, callee frame address is used to compute the return address of
callee producing improper return address. This patch adds the fix to use caller
frame address to compute the return address of callee.
Reviewed By: nemanjai, #powerpc
Differential revision: https://reviews.llvm.org/D107646
This patch enables extending loads for fixed length SVE code generation.
There is a slight regression here in the mulh tests; since these tests
load the parameter and then extend it these are treated as extending
loads which are merged, preventing the mulh instruction from being
generated. As this affects scalable SVE codegen as well this should be
addressed in a separate patch.
Reviewed By: bsmith
Differential Revision: https://reviews.llvm.org/D107057
These rules were originally written when the new predicate based legalizer
was introduced in an attempt to preserve existing behaviour. It wasn't
properly kept up to date as things like vector support was split out into
G_CONCAT_VECTORS, and frankly, even if it was, it was too complex.
It's much easier to start from scratch with what we can actually support,
which is just a few type combinations. Anything illegal we should either
legalize, or should be eliminated as a side effect of artifact combination.
Differential Revision: https://reviews.llvm.org/D107937
The assertion can fail in some cases when an i16 constant is promoted
to i32.
e.g. in the added test case the value `i16 -32768` is within the range
of i16 but the assert fails when the constant is promoted to positive
`i32 32768` by an earlier call to DAG.getConstant().
Differential Revision: https://reviews.llvm.org/D107880
Change-Id: I2f6179783cbc9630e6acab149a762b43c65664de
This patch adds Pass1 of MIRADDFSDiscriminatorsPass before register
allocation, and Pass2 of MIRAddFSDiscriminatorsPass before
Block-Placement. This is still under --enable-fs-discrmininator
option (default false).
This would reduce the turn-around time for FSAFDO transition.
Differential Revision: https://reviews.llvm.org/D104579
We may call lowerRelativeReference in MC to determine whether target
supports this lowering. We should return nullptr instead of crashing
when we haven't implemented the real lowering.
Reviewed By: hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D107830
The requested register class priorities weren't respected
globally. Not sure why this is a target option, and not just the
expected behavior (recently added in
1a6dc92be7d68611077f0fb0b723b361817c950c). This avoids an allocation
failure when many wide tuple spills are introduced. I think this is a
workaround since I would not expect the allocation priority to be
required, and only a performance hint. The allocator should be smarter
about when only a subregister needs to be spilled and restored.
This does regress a couple of degenerate store stress lit tests which
shouldn't be too important.
Similar for sub except sub isn't commutative.
Modify the existing and/or/xor folds to also work on ISD::SELECT
and not just RISCVISD::SELECT_CC. This is needed to make sure
we do this transform before type legalization turns i32 add/sub
into add/sub+sign_extend_inreg on RV64. If we don't do this before
that, the sign_extend_inreg will still be after the select.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D107603
If a G_SHL is fed by a G_CONSTANT, the lower and upper bits of the source can be
shifted individually by the constant shift amount.
However in case the shift amount came from a G_TRUNC(G_CONSTANT), the generic shift legalization
code was used, producing intermediate shifts that are potentially illegal on some targets.
This change teaches narrowScalarShift to look through G_TRUNCs and G_*EXTs.
Reviewed By: paquette
Differential Revision: https://reviews.llvm.org/D89100
This changes a couple of calls to LiveRegs.contains to
!LiveRegs.available, one in Thumb1FrameLoweringInfo (which modifies a
test to look more correct to me, given r7 should be the frame pointer so
is not available), and another in the ARMLoadStoreOptimizer, that I
don't have a test for, it was just found by inspection.
Differential Revision: https://reviews.llvm.org/D107454
C++20 no longer requires the failure memory ordering to be no stronger than the
success memory ordering. Adjust assert in AMD GPU SIMemoryLegalizer, and merge
instruction memory orderings
Add common operation to merge memory orders that allows non strict memory
orderings to be combined. Use it in SIMemoryLegalizer and
MachineMemOperand::getMergedOrdering.
Reviewed By: efriedma, rampitec
Differential Revision: https://reviews.llvm.org/D106729
I was originally going to try to implement this in target-independent
code, but it's actually sort of tricky to generate the correct sequence
for vectors like nxv2f32. So just stick this in target-specific code,
at least for now.
Differential Revision: https://reviews.llvm.org/D107608
The patterns for fixed length gather/scatter with 32-bit offsets and
64-bit memory type are slightly different that the rest of the patterns,
as such the lowering needs to be slightly different to ensure the
correct types are used.
Differential Revision: https://reviews.llvm.org/D107576
Shuffles which are broken into separate halves reveal splats in which
a half is accessed via one index; such operations can be optimized to
use "vrgather.vi".
This optimization could be achieved by adding extra patterns to match
`vrgather_vv_vl` which uses a splat as an index operand, but this patch
instead identifies splat earlier. This way, future optimizations can
build on top of the data gathered here, e.g., to splat-gather dominant
indices and insert any leftovers.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D107449
These shuffles all take the form of a "splat" of the LHS and/or RHS to
some degree, with one or two elements needing patched up afterwards. We
currently lower all of these to full LHS/RHS vector-index shuffles with
vrgather.vv.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D107447
This test didn't include all test check lines, thanks to .'s in function
names. It also changed the triple to hard float to make a more
interesting test for NEON code generation.
This should be testing the custom ISD nodes we use for passing
half values in GPRs.
We should optimize these to integer operations, but we currently
don't.
Previously we converted ISD condition codes to integers and stored
them directly in our MIR instructions. The ISD enum kind of belongs
to SelectionDAG so that seems like incorrect layering.
This patch instead uses a CondCode node on RISCV::SELECT_CC until
isel and then converts it from ISD encoding to a RISCV specific value.
This value can be converted to/from the RISCV branch opcodes in the
RISCV namespace.
My larger motivation is to possibly support a microarchitectural
feature of some CPUs where a short forward branch over a single
instruction can be predicated internally. This will require a new
pseudo instruction for select that needs to carry a branch condition
and live probably until RISCVExpandPseudos. At that point it can be
expanded to control flow without other instructions ending up in the
predicated basic block. Using an ISD encoding in RISCVExpandPseudos
doesn't seem like correct layering.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D107400
Previously ADD & ADDA (as well as SUB & SUBA) instructions are mixed
together, which not only violated Motorola assembly's syntax but also
made asm parsing more difficult. This patch separates these two kinds of
instructions migrate rest of the tests from
test/CodeGen/M68k/Encoding/Arithmetic to test/MC/M68k/Arithmetic.
Note that we observed minor regressions on codegen quality: Sometimes
isel uses ADD instead of ADDA even the latter can lead to shorter
sequence of code. This issue implies that some isel patterns might need
to be updated.
The fcvt fp to integer instructions saturate if their input is
infinity or out of range, but the instructions produce a maximum
integer for nan instead of 0 required for the ISD opcodes.
This means we can use the instructions to do the saturating
conversion, but we'll need to fix up the nan case at the end.
We can probably improve the i8 and i16 default codegen as well,
but I'll leave that for a follow up.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D107230
The IR for pmuldq/pmuludq intrinsics uses a sext_inreg/zext_inreg
pattern on the inputs. Ideally we pattern match these away during
isel. It is possible for LICM or other middle end optimizations
to separate the extend from the mul. This prevents SelectionDAG
from removing it or depending on how the extend is lowered, we
may not be able to generate an AssertSExt/AssertZExt in the
mul basic block. This will prevent pmuldq/pmuludq from being
formed at all.
This patch teaches shouldSinkOperands to recognize this so
that CodeGenPrepare will clone the extend into the same basic
block as the mul.
Fixes PR51371.
Differential Revision: https://reviews.llvm.org/D107689
We should use MachineInstr::eraseFromParentAndMarkDBGValuesForRemoval()
instead of eraseFromParent().
We should probably use that in other places too but fix this issue which
affects clang bootstrap builds for now.
This commit adds the isnan intrinsic and provides a default expansion
for it in the SDAG. However, it makes the assumption that types
it operates on are IEEE-compliant types. This is not always the case.
An example of that is PPC "double double" which has a representation
that
- Does not need to conform to IEEE requirements for isnan as it is
not an IEEE-compliant type
- Does not have a representation that allows for straightforward
reinterpreting as an integer and use of integer operations
The result was that this commit broke __builtin_isnan for ppc_fp128
making many valid numeric values report a NaN.
This patch simply changes the expansion to always expand to unordered
comparison (regardless of whether FP exceptions are tracked). This
is inline with previous semantics.
