This reverts commit 425dda76e9fac93117289fd68a2abdfb1e4a0ba5.
This commit is currently causing BOLT to crash in one of our
binaries and needs a bit more checking to make sure it is safe
to land.
The gold linker veneers are written between functions without symbols,
so we to handle it specially in BOLT.
Vladislav Khmelevsky,
Advanced Software Technology Lab, Huawei
Differential Revision: https://reviews.llvm.org/D128082
Resolve a crash related to split functions
Due to split function optimization, a function can be divided to two
fragments, and both fragments can access same jump table. This
violates the assumption that a jump table can only have one parent
function, which causes a crash during instrumentation.
We want to support the case: different functions cannot access same
jump tables, but different fragments of same function can!
As all fragments are from same function, we point JT::Parent to one
specific fragment. Right now it is the first disassembled fragment, but
we can point it to the function's main fragment later.
Functions are disassembled sequentially. Previously, at the end of
processing a function, JT::OffsetEntries is cleared, so other fragment
can no longer reuse JT::OffsetEntries. To extend the support for split
function, we only clear JT::OffsetEntries after all functions are
disassembled.
Let say A.hot and A.cold access JT of three targets {X, Y, Z}, where
X and Y are in A.hot, and Z is in A.cold. Suppose that A.hot is
disassembled first, JT::OffsetEntries = {X',Y',INVALID_OFFSET}. When
A.cold is disassembled, it cannot reuse JT::OffsetEntries above due to
different fragment start. A simple solution:
A.hot = {X',Y',INVALID_OFFSET}
A.cold = {INVALID_OFFSET, INVALID_OFFSET, INVALID_OFFSET}
We update the assertion to allow different fragments of same function
to get the same JumpTable object.
Potential improvements:
A.hot = {X',Y',INVALID_OFFSET}
A.cold = {INVALID_OFFSET, INVALID_OFFSET, Z'}
The main issue is A.hot and A.cold have separate CFGs, thus jump table
targets are still constrained within fragment bounds.
Future improvements:
A.hot = {X, Y, Z}
A.cold = {X, Y, Z}
Reviewed By: Amir
Differential Revision: https://reviews.llvm.org/D127924
Mark fragments related to split jump table as non-simple.
A function could be splitted into hot and cold fragments. A split jump table is
challenging for correctly reconstructing control flow graphs, so it was marked
as ignored. This update marks those fragments as non-simple, allowing them
to be printed and partial control flow graph construction.
Test Plan:
```
llvm-lit -a tools/bolt/test/X86/split-func-icf.s
```
This test has two functions (main, main2), each has a jump table target to the
same cold portion main2.cold.1(*2). We try to print out only this cold portion.
If it is ignored, it cannot be printed. If it is non-simple, it can be printed. We
verify that it can be printed.
Reviewed By: Amir
Differential Revision: https://reviews.llvm.org/D127464
Summary:
While disassembling instructions, we need to replace certain immediate
operands with symbols. This symbolizing process relies on reading
relocations against instructions. However, some X86 instructions can
have multiple immediate operands and up to two relocations against
them. Thus, correctly matching a relocation to an operand is not
always possible without knowing the operand offset within the
instruction.
Luckily, LLVM provides an interface for passing the required info from
the disassembler via a virtual MCSymbolizer class. Creating a
target-specific version allows a precise matching of relocations to
operands.
This diff adds X86MCSymbolizer class that performs X86-specific
symbolizing (currently limited to non-branch instructions).
Reviewers: yota9, Amir, ayermolo, rafauler, zr33
Differential Revision: https://reviews.llvm.org/D120928
Fix BOLT's constant island mapping when a constant island marked by $d
spans multiple functions. Currently, because BOLT only marks the
constant island in the first function where $d is located, if the next
function contains data at its start, BOLT will miss the data and try
to disassemble it. This patch adds code to explicitly go through all
symbols between $d and $x markers and mark their respective offsets as
data, which stops BOLT from trying to disassemble data. It also adds
MarkerType enum and refactors related functions.
Reviewed By: yota9, rafauler
Differential Revision: https://reviews.llvm.org/D126177
Addresses the warnings emitted by Apple Clang 13.1.6 (Xcode 13.3.1).
Tip @tschuett issue #55404.
Reviewed By: rafauler
Differential Revision: https://reviews.llvm.org/D125733
Added implementation to support DWARF5 in monolithic mode.
Next step DWARF5 split dwarf support.
Reviewed By: maksfb
Differential Revision: https://reviews.llvm.org/D121876
When processing profile data for shared object or PIE, perf2bolt needs
to calculate base address of the binary based on the map info reported
by the perf tool. When the mapping data provided is for the second
(or any other than the first) segment and the segment's file offset
does not match its memory offset, perf2bolt uses wrong assumption
about the binary base address.
Add a function to calculate binary base address using the reported
memory mapping and use the returned base for further address
adjustments.
Reviewed By: yota9
Differential Revision: https://reviews.llvm.org/D123755
Check that the function will be emitted in the final binary. Preserving
old function address is needed in case it is PLT trampiline, that is
currently not moved by the BOLT.
Differential Revision: https://reviews.llvm.org/D122098
For AArch64 in some cases/some distributions ld uses 64K alignment of LOAD segments by default.
Reviewed By: yota9, maksfb
Differential Revision: https://reviews.llvm.org/D119267
Refactor createBinaryContext and RewriteInstance/MachORewriteInstance
constructors to report an error in a library and fuzzer-friendly way instead of
returning a nullptr or exiting.
Reviewed By: rafauler
Differential Revision: https://reviews.llvm.org/D119658
As usual with that header cleanup series, some implicit dependencies now need to
be explicit:
llvm/DebugInfo/DWARF/DWARFContext.h no longer includes:
- "llvm/DebugInfo/DWARF/DWARFAcceleratorTable.h"
- "llvm/DebugInfo/DWARF/DWARFCompileUnit.h"
- "llvm/DebugInfo/DWARF/DWARFDebugAbbrev.h"
- "llvm/DebugInfo/DWARF/DWARFDebugAranges.h"
- "llvm/DebugInfo/DWARF/DWARFDebugFrame.h"
- "llvm/DebugInfo/DWARF/DWARFDebugLoc.h"
- "llvm/DebugInfo/DWARF/DWARFDebugMacro.h"
- "llvm/DebugInfo/DWARF/DWARFGdbIndex.h"
- "llvm/DebugInfo/DWARF/DWARFSection.h"
- "llvm/DebugInfo/DWARF/DWARFTypeUnit.h"
- "llvm/DebugInfo/DWARF/DWARFUnitIndex.h"
Plus llvm/Support/Errc.h not included by a bunch of llvm/DebugInfo/DWARF/DWARF*.h files
Preprocessed lines to build llvm on my setup:
after: 1065629059
before: 1066621848
Which is a great diff!
Discourse thread: https://discourse.llvm.org/t/include-what-you-use-include-cleanup
Differential Revision: https://reviews.llvm.org/D119723
Summary:
Move the annotation to avoid dynamic memory allocations.
Improves the CPU time of instrumenting a large binary by 1% (+-0.8%, p-value 0.01)
Test Plan: NFC
Reviewers: maksfb
FBD30091656
Summary:
Fix according to Coding Standards doc, section Don't Use
Braces on Simple Single-Statement Bodies of if/else/loop Statements.
This set of changes applies to lib Core only.
(cherry picked from FBD33240028)
Summary:
Gracefully handle binaries with split functions where two fragments are folded
into one, resulting in a fragment with two parent functions.
This behavior is expected in GCC8+ with -O2 optimization level, where both
function splitting and ICF are enabled by default.
On the BOLT side, the changes are:
- BinaryFunction: allow multiple parent fragments:
- `ParentFragment` --> `ParentFragments`,
- `setParentFragment` --> `addParentFragment`.
- BinaryContext:
- `populateJumpTables`: mark fragments to be skipped later,
- `registerFragment`: add a name heuristic check, return false if it failed,
- `processInterproceduralReferences`: check if `registerFragment`
succeeded, otherwise issue a warning,
- `skipMarkedFragments`: move out fragment traversal and skipping from
`populateJumpTables` into a separate function.
This change fixes an issue where unrelated functions might be registered
as fragments:
```
BOLT-WARNING: interprocedural reference between unrelated fragments:
bad_gs/1(*2) and amd_decode_mce.cold.27/1(*2)
```
(Linux kernel binary)
(cherry picked from FBD32786688)
Summary:
Moves source files into separate components, and make explicit
component dependency on each other, so LLVM build system knows how to
build BOLT in BUILD_SHARED_LIBS=ON.
Please use the -c merge.renamelimit=230 git option when rebasing your
work on top of this change.
To achieve this, we create a new library to hold core IR files (most
classes beginning with Binary in their names), a new library to hold
Utils, some command line options shared across both RewriteInstance
and core IR files, a new library called Rewrite to hold most classes
concerned with running top-level functions coordinating the binary
rewriting process, and a new library called Profile to hold classes
dealing with profile reading and writing.
To remove the dependency from BinaryContext into X86-specific classes,
we do some refactoring on the BinaryContext constructor to receive a
reference to the specific backend directly from RewriteInstance. Then,
the dependency on X86 or AArch64-specific classes is transfered to the
Rewrite library. We can't have the Core library depend on targets
because targets depend on Core (which would create a cycle).
Files implementing the entry point of a tool are transferred to the
tools/ folder. All header files are transferred to the include/
folder. The src/ folder was renamed to lib/.
(cherry picked from FBD32746834)
