Search from AND nodes to find whether they can be propagated back to
loads, so that the AND and load can be combined into a narrow load.
We search through OR, XOR and other AND nodes and all bar one of the
leaves are required to be loads or constants. The exception node then
needs to be masked off meaning that the 'and' isn't removed, but the
loads(s) are narrowed still.
Differential Revision: https://reviews.llvm.org/D39604
llvm-svn: 319773
Summary:
Found out, at code inspection, that there was a fault in
DAGCombiner::CombineConsecutiveLoads for big-endian targets.
A BUILD_PAIR is always having the least significant bits of
the composite value in element 0. So when we are doing the checks
for consecutive loads, for big endian targets, we should check
if the load to elt 1 is at the lower address and the load
to elt 0 is at the higher address.
Normally this bug only resulted in missed oppurtunities for
doing the load combine. I guess that in some rare situation it
could lead to faulty combines, but I've not seen that happen.
Note that this patch actually will trigger load combine for
some big endian regression tests.
One example is test/CodeGen/PowerPC/anon_aggr.ll where we now get
t76: i64,ch = load<LD8[FixedStack-9]
instead of
t37: i32,ch = load<LD4[FixedStack-10]>
t35: i32,ch = load<LD4[FixedStack-9]>
t41: i64 = build_pair t37, t35
before legalization. Then the legalization will split the LD8
into two loads, so the end result is the same. That should
verify that the transfomation is correct now.
Reviewers: niravd, hfinkel
Reviewed By: niravd
Subscribers: nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D40444
llvm-svn: 319771
Move hardcoded itinerary out to the instruction declarations. Not sure that IIC_SSE_ALU_F32P is the best schedule for integer comparisons, but I'm not going to change it right now.
llvm-svn: 319760
Move hardcoded itinerary out to the instruction declarations. Not sure that IIC_SSE_ALU_F32P is the best schedule for integer comparisons, but I'm not going to change it right now.
llvm-svn: 319758
This has proven a healthy exercise, as many cases of incorrect instruction
flags were corrected in the process. As part of this, IntrWriteMem was added
to several SystemZ instrinsics.
Furthermore, a bug was exposed in TwoAddress with this change (as incorrect
hasSideEffects flags were removed and instructions could now be sunk), and
the test case for that bugfix (r319646) is included here as
test/CodeGen/SystemZ/twoaddr-sink.ll.
One temporary test regression (one extra copy) which will hopefully go away
in upcoming patches for similar cases:
test/CodeGen/SystemZ/vec-trunc-to-i1.ll
Review: Ulrich Weigand.
https://reviews.llvm.org/D40437
llvm-svn: 319756
MachineRegisterInfo used to allow just one regalloc hint per virtual
register. This patch extends this to a vector of regalloc hints, which is
filled in by common code with sorted copy hints. Such hints will make for
more ID copies that can be removed.
NB! This improvement is currently (and hopefully temporarily) *disabled* by
default, except for SystemZ. The only reason for this is the big impact this
has on tests, which has unfortunately proven unmanageable. It was a long
while since all the tests were updated and just waiting for review (which
didn't happen), but now targets have to enable this themselves
instead. Several targets could get a head-start by downloading the tests
updates from the Phabricator review. Thanks to those who helped, and sorry
you now have to do this step yourselves.
This should be an improvement generally for any target!
The target may still create its own hint, in which case this has highest
priority and is stored first in the vector. If it has target-type, it will
not be recomputed, as per the previous behaviour.
The temporary hook enableMultipleCopyHints() will be removed as soon as all
targets return true.
Review: Quentin Colombet, Ulrich Weigand.
https://reviews.llvm.org/D38128
llvm-svn: 319754
When trying to determine the correct Mask register class corresponding
to a GPR register class, not all register classes were handled.
This caused an assertion to be raised on some scenarios.
Differential Revision:
https://reviews.llvm.org/D40290
llvm-svn: 319745
Previously we used a wider element type and truncated. But its more efficient to keep the element type and drop unused elements.
If BWI isn't supported and we have a i16 or i8 type, we'll extend it to be i32 and still use a truncate.
llvm-svn: 319740
This calls handleMove with a DBG_VALUE instruction,
which isn't tracked by LiveIntervals. I'm not sure
this is the correct place to fix this. The generic
scheduler seems to have more deliberate region
selection that skips dbg_value.
The test is also really hard to reduce. I haven't been able
to figure out what exactly causes this particular case to
try moving the dbg_value.
llvm-svn: 319732
Previously we used a wider element type and truncated. But its more efficient to keep the element type and drop unused elements.
If BWI isn't supported and we have a i16 or i8 type, we'll extend it to be i32 and still use a truncate.
llvm-svn: 319728
The getConstant function can take care of creating the APInt internally.
getZeroVector will take care of using the correct type for the build vector to avoid re-lowering.
The test change here is because execution domain constraints apparently pass through undef inputs of a zeroing xor. So the different ordering of register allocation here caused the dependency to change.
llvm-svn: 319725
It's not implemented.
Passing +fp64-fp16-denormal feature enables fp64 even on asics that don't support it
v2: fix hasFP64 query
Differential Revision: https://reviews.llvm.org/D39931
llvm-svn: 319709
Move the entire optimization to one place. Before it was possible
to adjust dmask without changing the register class of the output
instruction, since they were done in separate places. Fix all
lane sizes and move all of the optimization into the DAG folding.
llvm-svn: 319705
Set the .debug_line version to match the requested DWARF version,
except with a maximum of v4 because we don't support v5 yet.
Previously Chromium had issues with this patch; see PR31407. Chromium
tool issues have been addressed, so hopefully this will go through
this time.
Patch by Katya Romanova!
Differential Revision: https://reviews.llvm.org/D38002
llvm-svn: 319699
If the truncation has been pushed past the or-node, look through it and
truncate afterwards.
Differential revision: https://reviews.llvm.org/D40792
llvm-svn: 319692
This patch splits atomics out of the generic G_LOAD/G_STORE and into their own
G_ATOMIC_LOAD/G_ATOMIC_STORE. This is a pragmatic decision rather than a
necessary one. Atomic load/store has little in implementation in common with
non-atomic load/store. They tend to be handled very differently throughout the
backend. It also has the nice side-effect of slightly improving the common-case
performance at ISel since there's no longer a need for an atomicity check in the
matcher table.
All targets have been updated to remove the atomic load/store check from the
G_LOAD/G_STORE path. AArch64 has also been updated to mark
G_ATOMIC_LOAD/G_ATOMIC_STORE legal.
There is one issue with this patch though which also affects the extending loads
and truncating stores. The rules only match when an appropriate G_ANYEXT is
present in the MIR. For example,
(G_ATOMIC_STORE (G_TRUNC:s16 (G_ANYEXT:s32 (G_ATOMIC_LOAD:s16 X))))
will match but:
(G_ATOMIC_STORE (G_ATOMIC_LOAD:s16 X))
will not. This shouldn't be a problem at the moment, but as we get better at
eliminating extends/truncates we'll likely start failing to match in some
cases. The current plan is to fix this in a patch that changes the
representation of extending-load/truncating-store to allow the MMO to describe
a different type to the operation.
llvm-svn: 319691
As part of the unification of the debug format and the MIR format, print
MBB references as '%bb.5'.
The MIR printer prints the IR name of a MBB only for block definitions.
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g'
* find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g'
* grep -nr 'BB#' and fix
Differential Revision: https://reviews.llvm.org/D40422
llvm-svn: 319665
Summary:
The compiler fails with the following error message:
fatal error: error in backend: ran out of registers during
register allocation
Tail call optimization for Armv8-M.base fails to meet all the required
constraints when handling calls to function pointers where the
arguments take up r0-r3. This is because the pointer to the
function to be called can only be stored in r0-r3, but these are
all occupied by arguments. This patch makes sure that tail call
optimization does not try to handle this type of calls.
Reviewers: chill, MatzeB, olista01, rengolin, efriedma
Reviewed By: olista01, efriedma
Subscribers: efriedma, aemerson, javed.absar, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D40706
llvm-svn: 319664
PTX requires that identifiers consist only of [a-zA-Z0-9_$]. The
existing pass already ensured this for globals and this patch adds
the cleanup for functions with local linkage.
However, there was a different problem in the case of collisions
of the adjusted name: The ValueSymbolTable then automatically
appended ".N" with increasing Ns to get a unique name while helping
the ABI demangling. Special case this behavior to omit the dots and
append N directly. This will always give us legal names according
to the PTX requirements.
Differential Revision: https://reviews.llvm.org/D40573
llvm-svn: 319657
This matches how it is done on X86.
This allows using emulated tls on windows; in MinGW environments,
native tls isn't supported at the moment.
Set the right Data*bitsDirective for windows to match the existing
tests for other platforms. Make parts of the existing tests a regex,
to allow matching .section .rdata for windows, to avoid having to
duplicate the rest of the tests for windows.
Differential Revision: https://reviews.llvm.org/D40770
llvm-svn: 319644
This matches how it is done on X86.
This allows using emulated tls on windows; in MinGW environments,
native tls isn't supported at the moment.
Differential Revision: https://reviews.llvm.org/D40769
llvm-svn: 319643
These instructions can be used by widening to 512-bits and extracting back to 128/256. We do similar to several other instructions already.
llvm-svn: 319641
If we have a non-splat constant shift amount, the minimum shift amount can be used to infer the number of zero upper bits of the result. There's probably a lot more that we can do here, but this
fixes a case where I wanted to infer the sign bit as zero when all the shift amounts are non-zero.
llvm-svn: 319639
SelectionDAGISel::LowerArguments assumes sret addr space is 0, which is
not true for amdgcn---amdgiz target.
This patch fixes that.
Differential Revision: https://reviews.llvm.org/D40255
llvm-svn: 319630
Two issues found when doing codegen for splitting vector with non-zero alloca addr space:
DAGTypeLegalizer::SplitVecRes_INSERT_VECTOR_ELT/SplitVecOp_EXTRACT_VECTOR_ELT uses dummy pointer info for creating
SDStore. Since one pointer operand contains multiply and add, InferPointerInfo is unable to
infer the correct pointer info, which ends up with a dummy pointer info for the target to lower
store and results in isel failure. The fix is to introduce MachinePointerInfo::getUnknownStack to
represent MachinePointerInfo which is known in alloca address space but without other information.
TargetLowering::getVectorElementPointer uses value type of pointer in addr space 0 for
multiplication of index and then add it to the pointer. However the pointer may be in an addr
space which has different size than addr space 0. The fix is to use the pointer value type for
index multiplication.
Differential Revision: https://reviews.llvm.org/D39758
llvm-svn: 319622
These are blocks that haven't not been executed during training. For large
projects this could make a significant difference. For the project, I was
looking at, I got an order of magnitude decrease in the size of the total YAML
files with this and r319235.
Differential Revision: https://reviews.llvm.org/D40678
Re-commit after fixing the failing testcase in rL319576, rL319577 and
rL319578.
llvm-svn: 319581
These are blocks that haven't not been executed during training. For large
projects this could make a significant difference. For the project, I was
looking at, I got an order of magnitude decrease in the size of the total YAML
files with this and r319235.
Differential Revision: https://reviews.llvm.org/D40678
llvm-svn: 319556
Summary:
1/ Operand folding during complex pattern matching for LEAs has been extended, such that it promotes Scale to
accommodate similar operand appearing in the DAG e.g.
T1 = A + B
T2 = T1 + 10
T3 = T2 + A
For above DAG rooted at T3, X86AddressMode will now look like
Base = B , Index = A , Scale = 2 , Disp = 10
2/ During OptimizeLEAPass down the pipeline factorization is now performed over LEAs so that if there is an opportunity
then complex LEAs (having 3 operands) could be factored out e.g.
leal 1(%rax,%rcx,1), %rdx
leal 1(%rax,%rcx,2), %rcx
will be factored as following
leal 1(%rax,%rcx,1), %rdx
leal (%rdx,%rcx) , %edx
3/ Aggressive operand folding for AM based selection for LEAs is sensitive to loops, thus avoiding creation of any complex LEAs within a loop.
4/ Simplify LEA converts (lea (BASE,1,INDEX,0) --> add (BASE, INDEX) which offers better through put.
PR32755 will be taken care of by this pathc.
Previous patch revisions : r313343 , r314886
Reviewers: lsaba, RKSimon, craig.topper, qcolombet, jmolloy, jbhateja
Reviewed By: lsaba, RKSimon, jbhateja
Subscribers: jmolloy, spatel, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D35014
llvm-svn: 319543
