These functions were extremely similar:
- `emitADD`
- `emitADDS`
- `emitCMN`
Refactor them a little, introducing a more generic `emitInstr` function to
do most of the work.
Also add support for the immediate + shifted register addressing modes in each
of them.
Update select-uaddo.mir to show that selecing ADDS now supports folding
immediates + shifts. (I don't think this can impact CMN, because the CMN checks
require a G_SUB with a non-constant on the RHS.)
This is around a 0.02% code size improvement on CTMark at -O3.
Differential Revision: https://reviews.llvm.org/D87529
https://reviews.llvm.org/D87668
Patch adds two new GICombinerRules, one for G_MUL(X, 1) and another for G_MUL(X, -1).
G_MUL(X, 1) is an identity combine, and G_MUL(X, -1) gets replaced with G_SUB(0, X).
Patch additionally adds new combiner tests for the AArch64 target to test these
new combiner rules, as well as updates AMDGPU GISel tests.
Patch by mkitzan
We have a single noret intrinsic an a lot of special handling
around it. Declare it just as any other but do not define rtn
instructions itself instead.
Differential Revision: https://reviews.llvm.org/D87719
PR47534 exposes a case where calling lowerShuffleWithSHUFPS directly from a derived repeated mask (found by is128BitLaneRepeatedShuffleMask) results in us using an non-canonicalized mask.
The missed canonicalization in this case is trivial - just commute the mask so we have more (swapped) LHS than RHS references so lowerShuffleWithSHUFPS can handle it.
2508ef01 doesn't totally fix the issue since we did not handle the case
when unused temporary negated result is the same with the result, which
is found by address sanitizer.
This seems to have caused incorrect register allocation in some cases,
breaking tests in the Zig standard library (PR47278).
As discussed on the bug, revert back to green for now.
> Record internal state based on register units. This is often more
> efficient as there are typically fewer register units to update
> compared to iterating over all the aliases of a register.
>
> Original patch by Matthias Braun, but I've been rebasing and fixing it
> for almost 2 years and fixed a few bugs causing intermediate failures
> to make this patch independent of the changes in
> https://reviews.llvm.org/D52010.
This reverts commit 66251f7e1de79a7c1620659b7f58352b8c8e892e, and
follow-ups 931a68f26b9a3de853807ffad7b2cd0a2dd30922
and 0671a4c5087d40450603d9d26cf239f1a8b1367e. It also adjust some
test expectations.
We're now getting close to having the necessary analysis/combines etc. for the new generic llvm smax/smin/umax/umin intrinsics.
This patch updates the SSE/AVX integer MINMAX intrinsics to emit the generic equivalents instead of the icmp+select code pattern.
Differential Revision: https://reviews.llvm.org/D87603
960cbc53 immediately removes nodes that won't be used to avoid
compilation time explosion. This patch adds the removal to constants to
fix PR47517.
Reviewed By: RKSimon, steven.zhang
Differential Revision: https://reviews.llvm.org/D87614
Drop the pow2 vector limitation for AVG generation by padding the vector to the next pow2, creating the PAVG nodes and then extracting the final subvector.
Fixes some poor codegen that has been annoying me for years.....
Update TargetMachine.Options with function attributes before we start
to generate MIR instructions. This allows access to correct function
attributes via TargetMachine.Options (it used to access attributes of
the function that was translated first).
This affects some existing tests with "no-nans-fp-math" attribute.
Follow-up on D87456.
Differential Revision: https://reviews.llvm.org/D87511
Add a combiner helper that replaces G_UNMERGE where all the destination lanes
are dead except the first one with a G_TRUNC.
Differential Revision: https://reviews.llvm.org/D87174
Add a combiner helper that replaces G_UNMERGE of big constants into direct
use of smaller constants.
Differential Revision: https://reviews.llvm.org/D87166
https://reviews.llvm.org/D87554
Patch adds one new GICombinerRule for G_FABS. The combine rule folds G_FABS(G_FABS(X)) to G_FABS(X).
Patch additionally adds new combiner tests for the AArch64 target to test this new combiner rule.
Patch by mkitzan.
Add the matching and applying function to the combiner helper for
G_UNMERGE_VALUES(G_MERGE_VALUES).
This combine also supports any merge-like input nodes, like G_BUILD_VECTORS
and is robust against bitcasts in between int unmerge and merge nodes.
When the input type of the merge node and the output type of the unmerge
node are not the same, but the sizes are, the combine still applies but
creates bitcasts between the sources and the destinations instead of
reusing the destinations directly.
Long term, the artifact combiner should probably reuse that helper, but
as of today, it doesn't use any outside helper, so I kept it this way.
Differential Revision: https://reviews.llvm.org/D87117
The versions that take 'unsigned' will be removed in the future.
I tried to use getOriginalAlign instead of getAlign in some
places. getAlign factors in the minimum alignment implied by
the offset in the pointer info. Since we're also passing the
pointer info we can use the original alignment.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D87592
The code that decomposes the GEP into ADD/MUL doesn't work properly
for vector GEPs. It can create bad COPY instructions or possibly
assert.
For now just bail out to SelectionDAG.
Fixes PR45906
This patch is the initial support for the Local Exec Thread Local
Storage model to produce code sequence and relocations correct
to the ABI for the model when using PC relative memory operations.
Patch by: Kamau Bridgeman
Differential Revision: https://reviews.llvm.org/D83404
This adds SoftenFloatRes, PromoteFloatRes and SoftPromoteHalfRes
legalizations for VECREDUCE, to fill the remaining hole in the SDAG
legalization. These legalizations simply expand the reduction and
let it be recursively legalized. For the PromoteFloatRes case at
least it is possible to do better than that, but it's pretty tricky
(because we need to consider the interaction of three different
vector legalizations and the type promotion) and probably not
really worthwhile.
I haven't added ExpandFloatRes support, as I am not familiar with
ppc_fp128.
Differential Revision: https://reviews.llvm.org/D87569
Similar to D87415, this folds the various float min/max opcodes
with a constant INF or -INF operand, or FLT_MAX / -FLT_MAX operand
if the ninf flag is set. Some of the folds are only possible under
nnan.
The fminnum(X, INF) with nnan and fmaxnum(X, -INF) with nnan cases
are needed to improve the VECREDUCE_FMIN/FMAX lowerings on X86,
the rest is here for the sake of completeness.
Differential Revision: https://reviews.llvm.org/D87571
This patch introduces the new .bb_addr_map section feature which allows us to emit the bits needed for mapping binary profiles to basic blocks into a separate section.
The format of the emitted data is represented as follows. It includes a header for every function:
| Address of the function | -> 8 bytes (pointer size)
| Number of basic blocks in this function (>0) | -> ULEB128
The header is followed by a BB record for every basic block. These records are ordered in the same order as MachineBasicBlocks are placed in the function. Each BB Info is structured as follows:
| Offset of the basic block relative to function begin | -> ULEB128
| Binary size of the basic block | -> ULEB128
| BB metadata | -> ULEB128 [ MBB.isReturn() OR MBB.hasTailCall() << 1 OR MBB.isEHPad() << 2 ]
The new feature will replace the existing "BB labels" functionality with -basic-block-sections=labels.
The .bb_addr_map section scrubs the specially-encoded BB symbols from the binary and makes it friendly to profilers and debuggers.
Furthermore, the new feature reduces the binary size overhead from 70% bloat to only 12%.
For more information and results please refer to the RFC: https://lists.llvm.org/pipermail/llvm-dev/2020-July/143512.html
Reviewed By: MaskRay, snehasish
Differential Revision: https://reviews.llvm.org/D85408
Summary:
In small code model, AIX assembler could not deal with labels that
could not be reached within the [-0x8000, 0x8000) range from TOC base.
So when generating the assembly, we would need to help the assembler
by subtracting an offset from the label to keep the actual value
within [-0x8000, 0x8000).
Reviewed By: hubert.reinterpretcast, Xiangling_L
Differential Revision: https://reviews.llvm.org/D86879
Clustering loads has caching benefits, but as far as I know there is no
advantage to clustering stores on any AMDGPU subtargets.
The disadvantage is that it tends to increase register pressure and
restricts scheduling freedom.
Differential Revision: https://reviews.llvm.org/D85530
There is some code that can be shared between GNU/LLVM styles.
Also, this fixes 2 inconsistencies related to dumping unknown note types:
1) For GNU style we printed "Unknown note type: (0x00000003)" in some cases, and
"Unknown note type (0x00000003)" (no colon) in other cases.
GNU readelf always prints `:`. This patch removes the related code
duplication and does the same.
2) For LLVM style in some cases we printed "Unknown note type (0x00000003)",
but sometimes just "Unknown (0x00000003)". The latter is the right form, which
is consistent with other unknowns that are printed in LLVM style.
Rebased on top of D87453.
Differential revision: https://reviews.llvm.org/D87454
Instcombine limits converting phi types to simple loads and stores. This
does the same in codegenprepare, not processing phis that are not
simple.
Note that volatile loads/store ISel will happily convert between float
and int. Atomics are more likely to always be integer. This just keeps
things simple and doesn't process either.
Differential Revision: https://reviews.llvm.org/D83770
LLVM will canonicalize conditional selectors to a different pattern than the old code that was used.
This is updating the function to match the new expected patterns and select SSAT or USAT when successful.
Tests have also been updated to use the new patterns.
Differential Review: https://reviews.llvm.org/D87379
This adds additional checks for the original scalar loop tripcount value, i.e.
get.active.lane.mask second argument, and perform several sanity checks to see
if it is of the form that we expect similarly like we already do for the IV
which is the first argument of get.active.lane.
Differential Revision: https://reviews.llvm.org/D86074
Check for NoNaNsFPMath function attribute in isKnownNeverSNaN.
Function attributes are in held in 'TargetMachine.Options'.
Among other things, this allows selection of some patterns imported
in D87351 since G_FCANONICALIZE is not generated when isKnownNeverSNaN
returns true in lowerFMinNumMaxNum.
However we notice some incorrect results since function attributes are
not correctly written in TargetMachine.Options when next function is
processed. Take a look at @v_test_no_global_nnans_med3_f32_pat0_srcmod0,
it has "no-nans-fp-math"="false" but TargetMachine.Options still has it
set to true since first function in test file had this attribute set to
true. This will be fixed in D87511.
Differential Revision: https://reviews.llvm.org/D87456
The "name" of a non-leaf complex pattern (MY_PAT $op1, $op2) is
"MY_PAT:op1:op2" and the ones with same "name" represent same operand.
Add 'same operand check' for this case.
Differential Revision: https://reviews.llvm.org/D87351
